kevin/linux
1
Fork 0
Code
faec32e5bf
linux/arch/arm/mach-omap2/sleep34xx.S
Tero Kristo 79dcfdd407 OMAP3: PM: Added support for L2 aux ctrl register save and restore 
This patch adds a save and restore mechanism for ARM L2 auxiliary control
register. The feature is enabled by default for GP devices, but for HS/EMU
devices the user must enable the service and define the PPA service ID to
be used for setting L2 aux ctrl, as this is not currently supported by the
bootloader. If nobody alters the contents of L2 aux ctrl from its reset
value, this feature is not needed.

Kconfig option to enable HS/EMU L2 aux save and restore:
- OMAP3_L2_AUX_SECURE_SAVE_RESTORE
Kconfig option to select HS/EMU PPA service for setting L2 aux ctrl:
- OMAP3_L2_AUX_SECURE_SERVICE_SET_ID

Signed-off-by: Tero Kristo <tero.kristo@nokia.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-02-23 11:05:07 -08:00

673 lines
19 KiB
ArmAsm
Raw Blame History

/*
* linux/arch/arm/mach-omap2/sleep.S
*
* (C) Copyright 2007
* Texas Instruments
* Karthik Dasu <karthik-dp@ti.com>
*
* (C) Copyright 2004
* Texas Instruments, <www.ti.com>
* Richard Woodruff <r-woodruff2@ti.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <mach/io.h>
#include <plat/control.h>
#include "cm.h"
#include "prm.h"
#include "sdrc.h"
#define SDRC_SCRATCHPAD_SEM_V 0xfa00291c
#define PM_PREPWSTST_CORE_V OMAP34XX_PRM_REGADDR(CORE_MOD, \
OMAP3430_PM_PREPWSTST)
#define PM_PREPWSTST_CORE_P 0x48306AE8
#define PM_PREPWSTST_MPU_V OMAP34XX_PRM_REGADDR(MPU_MOD, \
OMAP3430_PM_PREPWSTST)
#define PM_PWSTCTRL_MPU_P OMAP3430_PRM_BASE + MPU_MOD + OMAP2_PM_PWSTCTRL
#define CM_IDLEST1_CORE_V OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST1)
#define SRAM_BASE_P 0x40200000
#define CONTROL_STAT 0x480022F0
#define SCRATCHPAD_MEM_OFFS 0x310 /* Move this as correct place is
* available */
#define SCRATCHPAD_BASE_P (OMAP343X_CTRL_BASE + OMAP343X_CONTROL_MEM_WKUP\
+ SCRATCHPAD_MEM_OFFS)
#define SDRC_POWER_V OMAP34XX_SDRC_REGADDR(SDRC_POWER)
#define SDRC_SYSCONFIG_P (OMAP343X_SDRC_BASE + SDRC_SYSCONFIG)
#define SDRC_MR_0_P (OMAP343X_SDRC_BASE + SDRC_MR_0)
#define SDRC_EMR2_0_P (OMAP343X_SDRC_BASE + SDRC_EMR2_0)
#define SDRC_MANUAL_0_P (OMAP343X_SDRC_BASE + SDRC_MANUAL_0)
#define SDRC_MR_1_P (OMAP343X_SDRC_BASE + SDRC_MR_1)
#define SDRC_EMR2_1_P (OMAP343X_SDRC_BASE + SDRC_EMR2_1)
#define SDRC_MANUAL_1_P (OMAP343X_SDRC_BASE + SDRC_MANUAL_1)
#define SDRC_DLLA_STATUS_V OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS)
#define SDRC_DLLA_CTRL_V OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL)
.text
/* Function to aquire the semaphore in scratchpad */
ENTRY(lock_scratchpad_sem)
stmfd sp!, {lr} @ save registers on stack
wait_sem:
mov r0,#1
ldr r1, sdrc_scratchpad_sem
wait_loop:
ldr r2, [r1] @ load the lock value
cmp r2, r0 @ is the lock free ?
beq wait_loop @ not free...
swp r2, r0, [r1] @ semaphore free so lock it and proceed
cmp r2, r0 @ did we succeed ?
beq wait_sem @ no - try again
ldmfd sp!, {pc} @ restore regs and return
sdrc_scratchpad_sem:
.word SDRC_SCRATCHPAD_SEM_V
ENTRY(lock_scratchpad_sem_sz)
.word . - lock_scratchpad_sem
.text
/* Function to release the scratchpad semaphore */
ENTRY(unlock_scratchpad_sem)
stmfd sp!, {lr} @ save registers on stack
ldr r3, sdrc_scratchpad_sem
mov r2,#0
str r2,[r3]
ldmfd sp!, {pc} @ restore regs and return
ENTRY(unlock_scratchpad_sem_sz)
.word . - unlock_scratchpad_sem
.text
/* Function call to get the restore pointer for resume from OFF */
ENTRY(get_restore_pointer)
stmfd sp!, {lr} @ save registers on stack
adr r0, restore
ldmfd sp!, {pc} @ restore regs and return
ENTRY(get_restore_pointer_sz)
.word . - get_restore_pointer
.text
/* Function call to get the restore pointer for for ES3 to resume from OFF */
ENTRY(get_es3_restore_pointer)
stmfd sp!, {lr} @ save registers on stack
adr r0, restore_es3
ldmfd sp!, {pc} @ restore regs and return
ENTRY(get_es3_restore_pointer_sz)
.word . - get_es3_restore_pointer
ENTRY(es3_sdrc_fix)
ldr r4, sdrc_syscfg @ get config addr
ldr r5, [r4] @ get value
tst r5, #0x100 @ is part access blocked
it eq
biceq r5, r5, #0x100 @ clear bit if set
str r5, [r4] @ write back change
ldr r4, sdrc_mr_0 @ get config addr
ldr r5, [r4] @ get value
str r5, [r4] @ write back change
ldr r4, sdrc_emr2_0 @ get config addr
ldr r5, [r4] @ get value
str r5, [r4] @ write back change
ldr r4, sdrc_manual_0 @ get config addr
mov r5, #0x2 @ autorefresh command
str r5, [r4] @ kick off refreshes
ldr r4, sdrc_mr_1 @ get config addr
ldr r5, [r4] @ get value
str r5, [r4] @ write back change
ldr r4, sdrc_emr2_1 @ get config addr
ldr r5, [r4] @ get value
str r5, [r4] @ write back change
ldr r4, sdrc_manual_1 @ get config addr
mov r5, #0x2 @ autorefresh command
str r5, [r4] @ kick off refreshes
bx lr
sdrc_syscfg:
.word SDRC_SYSCONFIG_P
sdrc_mr_0:
.word SDRC_MR_0_P
sdrc_emr2_0:
.word SDRC_EMR2_0_P
sdrc_manual_0:
.word SDRC_MANUAL_0_P
sdrc_mr_1:
.word SDRC_MR_1_P
sdrc_emr2_1:
.word SDRC_EMR2_1_P
sdrc_manual_1:
.word SDRC_MANUAL_1_P
ENTRY(es3_sdrc_fix_sz)
.word . - es3_sdrc_fix
/* Function to call rom code to save secure ram context */
ENTRY(save_secure_ram_context)
stmfd sp!, {r1-r12, lr} @ save registers on stack
save_secure_ram_debug:
/* b save_secure_ram_debug */ @ enable to debug save code
adr r3, api_params @ r3 points to parameters
str r0, [r3,#0x4] @ r0 has sdram address
ldr r12, high_mask
and r3, r3, r12
ldr r12, sram_phy_addr_mask
orr r3, r3, r12
mov r0, #25 @ set service ID for PPA
mov r12, r0 @ copy secure service ID in r12
mov r1, #0 @ set task id for ROM code in r1
mov r2, #4 @ set some flags in r2, r6
mov r6, #0xff
mcr p15, 0, r0, c7, c10, 4 @ data write barrier
mcr p15, 0, r0, c7, c10, 5 @ data memory barrier
.word 0xE1600071 @ call SMI monitor (smi #1)
nop
nop
nop
nop
ldmfd sp!, {r1-r12, pc}
sram_phy_addr_mask:
.word SRAM_BASE_P
high_mask:
.word 0xffff
api_params:
.word 0x4, 0x0, 0x0, 0x1, 0x1
ENTRY(save_secure_ram_context_sz)
.word . - save_secure_ram_context
/*
* Forces OMAP into idle state
*
* omap34xx_suspend() - This bit of code just executes the WFI
* for normal idles.
*
* Note: This code get's copied to internal SRAM at boot. When the OMAP
* wakes up it continues execution at the point it went to sleep.
*/
ENTRY(omap34xx_cpu_suspend)
stmfd sp!, {r0-r12, lr} @ save registers on stack
loop:
/*b loop*/ @Enable to debug by stepping through code
/* r0 contains restore pointer in sdram */
/* r1 contains information about saving context */
ldr r4, sdrc_power @ read the SDRC_POWER register
ldr r5, [r4] @ read the contents of SDRC_POWER
orr r5, r5, #0x40 @ enable self refresh on idle req
str r5, [r4] @ write back to SDRC_POWER register
cmp r1, #0x0
/* If context save is required, do that and execute wfi */
bne save_context_wfi
/* Data memory barrier and Data sync barrier */
mov r1, #0
mcr p15, 0, r1, c7, c10, 4
mcr p15, 0, r1, c7, c10, 5
wfi @ wait for interrupt
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
bl wait_sdrc_ok
ldmfd sp!, {r0-r12, pc} @ restore regs and return
restore_es3:
/*b restore_es3*/ @ Enable to debug restore code
ldr r5, pm_prepwstst_core_p
ldr r4, [r5]
and r4, r4, #0x3
cmp r4, #0x0 @ Check if previous power state of CORE is OFF
bne restore
adr r0, es3_sdrc_fix
ldr r1, sram_base
ldr r2, es3_sdrc_fix_sz
mov r2, r2, ror #2
copy_to_sram:
ldmia r0!, {r3} @ val = *src
stmia r1!, {r3} @ *dst = val
subs r2, r2, #0x1 @ num_words--
bne copy_to_sram
ldr r1, sram_base
blx r1
restore:
/* b restore*/ @ Enable to debug restore code
/* Check what was the reason for mpu reset and store the reason in r9*/
/* 1 - Only L1 and logic lost */
/* 2 - Only L2 lost - In this case, we wont be here */
/* 3 - Both L1 and L2 lost */
ldr r1, pm_pwstctrl_mpu
ldr r2, [r1]
and r2, r2, #0x3
cmp r2, #0x0 @ Check if target power state was OFF or RET
moveq r9, #0x3 @ MPU OFF => L1 and L2 lost
movne r9, #0x1 @ Only L1 and L2 lost => avoid L2 invalidation
bne logic_l1_restore
ldr r0, control_stat
ldr r1, [r0]
and r1, #0x700
cmp r1, #0x300
beq l2_inv_gp
mov r0, #40 @ set service ID for PPA
mov r12, r0 @ copy secure Service ID in r12
mov r1, #0 @ set task id for ROM code in r1
mov r2, #4 @ set some flags in r2, r6
mov r6, #0xff
adr r3, l2_inv_api_params @ r3 points to dummy parameters
mcr p15, 0, r0, c7, c10, 4 @ data write barrier
mcr p15, 0, r0, c7, c10, 5 @ data memory barrier
.word 0xE1600071 @ call SMI monitor (smi #1)
/* Write to Aux control register to set some bits */
mov r0, #42 @ set service ID for PPA
mov r12, r0 @ copy secure Service ID in r12
mov r1, #0 @ set task id for ROM code in r1
mov r2, #4 @ set some flags in r2, r6
mov r6, #0xff
ldr r4, scratchpad_base
ldr r3, [r4, #0xBC] @ r3 points to parameters
mcr p15, 0, r0, c7, c10, 4 @ data write barrier
mcr p15, 0, r0, c7, c10, 5 @ data memory barrier
.word 0xE1600071 @ call SMI monitor (smi #1)
#ifdef CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE
/* Restore L2 aux control register */
@ set service ID for PPA
mov r0, #CONFIG_OMAP3_L2_AUX_SECURE_SERVICE_SET_ID
mov r12, r0 @ copy service ID in r12
mov r1, #0 @ set task ID for ROM code in r1
mov r2, #4 @ set some flags in r2, r6
mov r6, #0xff
ldr r4, scratchpad_base
ldr r3, [r4, #0xBC]
adds r3, r3, #8 @ r3 points to parameters
mcr p15, 0, r0, c7, c10, 4 @ data write barrier
mcr p15, 0, r0, c7, c10, 5 @ data memory barrier
.word 0xE1600071 @ call SMI monitor (smi #1)
#endif
b logic_l1_restore
l2_inv_api_params:
.word 0x1, 0x00
l2_inv_gp:
/* Execute smi to invalidate L2 cache */
mov r12, #0x1 @ set up to invalide L2
smi: .word 0xE1600070 @ Call SMI monitor (smieq)
/* Write to Aux control register to set some bits */
ldr r4, scratchpad_base
ldr r3, [r4,#0xBC]
ldr r0, [r3,#4]
mov r12, #0x3
.word 0xE1600070 @ Call SMI monitor (smieq)
ldr r4, scratchpad_base
ldr r3, [r4,#0xBC]
ldr r0, [r3,#12]
mov r12, #0x2
.word 0xE1600070 @ Call SMI monitor (smieq)
logic_l1_restore:
mov r1, #0
/* Invalidate all instruction caches to PoU
* and flush branch target cache */
mcr p15, 0, r1, c7, c5, 0
ldr r4, scratchpad_base
ldr r3, [r4,#0xBC]
adds r3, r3, #16
ldmia r3!, {r4-r6}
mov sp, r4
msr spsr_cxsf, r5
mov lr, r6
ldmia r3!, {r4-r9}
/* Coprocessor access Control Register */
mcr p15, 0, r4, c1, c0, 2
/* TTBR0 */
MCR p15, 0, r5, c2, c0, 0
/* TTBR1 */
MCR p15, 0, r6, c2, c0, 1
/* Translation table base control register */
MCR p15, 0, r7, c2, c0, 2
/*domain access Control Register */
MCR p15, 0, r8, c3, c0, 0
/* data fault status Register */
MCR p15, 0, r9, c5, c0, 0
ldmia r3!,{r4-r8}
/* instruction fault status Register */
MCR p15, 0, r4, c5, c0, 1
/*Data Auxiliary Fault Status Register */
MCR p15, 0, r5, c5, c1, 0
/*Instruction Auxiliary Fault Status Register*/
MCR p15, 0, r6, c5, c1, 1
/*Data Fault Address Register */
MCR p15, 0, r7, c6, c0, 0
/*Instruction Fault Address Register*/
MCR p15, 0, r8, c6, c0, 2
ldmia r3!,{r4-r7}
/* user r/w thread and process ID */
MCR p15, 0, r4, c13, c0, 2
/* user ro thread and process ID */
MCR p15, 0, r5, c13, c0, 3
/*Privileged only thread and process ID */
MCR p15, 0, r6, c13, c0, 4
/* cache size selection */
MCR p15, 2, r7, c0, c0, 0
ldmia r3!,{r4-r8}
/* Data TLB lockdown registers */
MCR p15, 0, r4, c10, c0, 0
/* Instruction TLB lockdown registers */
MCR p15, 0, r5, c10, c0, 1
/* Secure or Nonsecure Vector Base Address */
MCR p15, 0, r6, c12, c0, 0
/* FCSE PID */
MCR p15, 0, r7, c13, c0, 0
/* Context PID */
MCR p15, 0, r8, c13, c0, 1
ldmia r3!,{r4-r5}
/* primary memory remap register */
MCR p15, 0, r4, c10, c2, 0
/*normal memory remap register */
MCR p15, 0, r5, c10, c2, 1
/* Restore cpsr */
ldmia r3!,{r4} /*load CPSR from SDRAM*/
msr cpsr, r4 /*store cpsr */
/* Enabling MMU here */
mrc p15, 0, r7, c2, c0, 2 /* Read TTBRControl */
/* Extract N (0:2) bits and decide whether to use TTBR0 or TTBR1*/
and r7, #0x7
cmp r7, #0x0
beq usettbr0
ttbr_error:
/* More work needs to be done to support N[0:2] value other than 0
* So looping here so that the error can be detected
*/
b ttbr_error
usettbr0:
mrc p15, 0, r2, c2, c0, 0
ldr r5, ttbrbit_mask
and r2, r5
mov r4, pc
ldr r5, table_index_mask
and r4, r5 /* r4 = 31 to 20 bits of pc */
/* Extract the value to be written to table entry */
ldr r1, table_entry
add r1, r1, r4 /* r1 has value to be written to table entry*/
/* Getting the address of table entry to modify */
lsr r4, #18
add r2, r4 /* r2 has the location which needs to be modified */
/* Storing previous entry of location being modified */
ldr r5, scratchpad_base
ldr r4, [r2]
str r4, [r5, #0xC0]
/* Modify the table entry */
str r1, [r2]
/* Storing address of entry being modified
* - will be restored after enabling MMU */
ldr r5, scratchpad_base
str r2, [r5, #0xC4]
mov r0, #0
mcr p15, 0, r0, c7, c5, 4 @ Flush prefetch buffer
mcr p15, 0, r0, c7, c5, 6 @ Invalidate branch predictor array
mcr p15, 0, r0, c8, c5, 0 @ Invalidate instruction TLB
mcr p15, 0, r0, c8, c6, 0 @ Invalidate data TLB
/* Restore control register but dont enable caches here*/
/* Caches will be enabled after restoring MMU table entry */
ldmia r3!, {r4}
/* Store previous value of control register in scratchpad */
str r4, [r5, #0xC8]
ldr r2, cache_pred_disable_mask
and r4, r2
mcr p15, 0, r4, c1, c0, 0
ldmfd sp!, {r0-r12, pc} @ restore regs and return
save_context_wfi:
/*b save_context_wfi*/ @ enable to debug save code
mov r8, r0 /* Store SDRAM address in r8 */
mrc p15, 0, r5, c1, c0, 1 @ Read Auxiliary Control Register
mov r4, #0x1 @ Number of parameters for restore call
stmia r8!, {r4-r5} @ Push parameters for restore call
mrc p15, 1, r5, c9, c0, 2 @ Read L2 AUX ctrl register
stmia r8!, {r4-r5} @ Push parameters for restore call
/* Check what that target sleep state is:stored in r1*/
/* 1 - Only L1 and logic lost */
/* 2 - Only L2 lost */
/* 3 - Both L1 and L2 lost */
cmp r1, #0x2 /* Only L2 lost */
beq clean_l2
cmp r1, #0x1 /* L2 retained */
/* r9 stores whether to clean L2 or not*/
moveq r9, #0x0 /* Dont Clean L2 */
movne r9, #0x1 /* Clean L2 */
l1_logic_lost:
/* Store sp and spsr to SDRAM */
mov r4, sp
mrs r5, spsr
mov r6, lr
stmia r8!, {r4-r6}
/* Save all ARM registers */
/* Coprocessor access control register */
mrc p15, 0, r6, c1, c0, 2
stmia r8!, {r6}
/* TTBR0, TTBR1 and Translation table base control */
mrc p15, 0, r4, c2, c0, 0
mrc p15, 0, r5, c2, c0, 1
mrc p15, 0, r6, c2, c0, 2
stmia r8!, {r4-r6}
/* Domain access control register, data fault status register,
and instruction fault status register */
mrc p15, 0, r4, c3, c0, 0
mrc p15, 0, r5, c5, c0, 0
mrc p15, 0, r6, c5, c0, 1
stmia r8!, {r4-r6}
/* Data aux fault status register, instruction aux fault status,
datat fault address register and instruction fault address register*/
mrc p15, 0, r4, c5, c1, 0
mrc p15, 0, r5, c5, c1, 1
mrc p15, 0, r6, c6, c0, 0
mrc p15, 0, r7, c6, c0, 2
stmia r8!, {r4-r7}
/* user r/w thread and process ID, user r/o thread and process ID,
priv only thread and process ID, cache size selection */
mrc p15, 0, r4, c13, c0, 2
mrc p15, 0, r5, c13, c0, 3
mrc p15, 0, r6, c13, c0, 4
mrc p15, 2, r7, c0, c0, 0
stmia r8!, {r4-r7}
/* Data TLB lockdown, instruction TLB lockdown registers */
mrc p15, 0, r5, c10, c0, 0
mrc p15, 0, r6, c10, c0, 1
stmia r8!, {r5-r6}
/* Secure or non secure vector base address, FCSE PID, Context PID*/
mrc p15, 0, r4, c12, c0, 0
mrc p15, 0, r5, c13, c0, 0
mrc p15, 0, r6, c13, c0, 1
stmia r8!, {r4-r6}
/* Primary remap, normal remap registers */
mrc p15, 0, r4, c10, c2, 0
mrc p15, 0, r5, c10, c2, 1
stmia r8!,{r4-r5}
/* Store current cpsr*/
mrs r2, cpsr
stmia r8!, {r2}
mrc p15, 0, r4, c1, c0, 0
/* save control register */
stmia r8!, {r4}
clean_caches:
/* Clean Data or unified cache to POU*/
/* How to invalidate only L1 cache???? - #FIX_ME# */
/* mcr p15, 0, r11, c7, c11, 1 */
cmp r9, #1 /* Check whether L2 inval is required or not*/
bne skip_l2_inval
clean_l2:
/* read clidr */
mrc p15, 1, r0, c0, c0, 1
/* extract loc from clidr */
ands r3, r0, #0x7000000
/* left align loc bit field */
mov r3, r3, lsr #23
/* if loc is 0, then no need to clean */
beq finished
/* start clean at cache level 0 */
mov r10, #0
loop1:
/* work out 3x current cache level */
add r2, r10, r10, lsr #1
/* extract cache type bits from clidr*/
mov r1, r0, lsr r2
/* mask of the bits for current cache only */
and r1, r1, #7
/* see what cache we have at this level */
cmp r1, #2
/* skip if no cache, or just i-cache */
blt skip
/* select current cache level in cssr */
mcr p15, 2, r10, c0, c0, 0
/* isb to sych the new cssr&csidr */
isb
/* read the new csidr */
mrc p15, 1, r1, c0, c0, 0
/* extract the length of the cache lines */
and r2, r1, #7
/* add 4 (line length offset) */
add r2, r2, #4
ldr r4, assoc_mask
/* find maximum number on the way size */
ands r4, r4, r1, lsr #3
/* find bit position of way size increment */
clz r5, r4
ldr r7, numset_mask
/* extract max number of the index size*/
ands r7, r7, r1, lsr #13
loop2:
mov r9, r4
/* create working copy of max way size*/
loop3:
/* factor way and cache number into r11 */
orr r11, r10, r9, lsl r5
/* factor index number into r11 */
orr r11, r11, r7, lsl r2
/*clean & invalidate by set/way */
mcr p15, 0, r11, c7, c10, 2
/* decrement the way*/
subs r9, r9, #1
bge loop3
/*decrement the index */
subs r7, r7, #1
bge loop2
skip:
add r10, r10, #2
/* increment cache number */
cmp r3, r10
bgt loop1
finished:
/*swith back to cache level 0 */
mov r10, #0
/* select current cache level in cssr */
mcr p15, 2, r10, c0, c0, 0
isb
skip_l2_inval:
/* Data memory barrier and Data sync barrier */
mov r1, #0
mcr p15, 0, r1, c7, c10, 4
mcr p15, 0, r1, c7, c10, 5
wfi @ wait for interrupt
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
bl wait_sdrc_ok
/* restore regs and return */
ldmfd sp!, {r0-r12, pc}
/* Make sure SDRC accesses are ok */
wait_sdrc_ok:
ldr r4, cm_idlest1_core
ldr r5, [r4]
and r5, r5, #0x2
cmp r5, #0
bne wait_sdrc_ok
ldr r4, sdrc_power
ldr r5, [r4]
bic r5, r5, #0x40
str r5, [r4]
wait_dll_lock:
/* Is dll in lock mode? */
ldr r4, sdrc_dlla_ctrl
ldr r5, [r4]
tst r5, #0x4
bxne lr
/* wait till dll locks */
ldr r4, sdrc_dlla_status
ldr r5, [r4]
and r5, r5, #0x4
cmp r5, #0x4
bne wait_dll_lock
bx lr
cm_idlest1_core:
.word CM_IDLEST1_CORE_V
sdrc_dlla_status:
.word SDRC_DLLA_STATUS_V
sdrc_dlla_ctrl:
.word SDRC_DLLA_CTRL_V
pm_prepwstst_core:
.word PM_PREPWSTST_CORE_V
pm_prepwstst_core_p:
.word PM_PREPWSTST_CORE_P
pm_prepwstst_mpu:
.word PM_PREPWSTST_MPU_V
pm_pwstctrl_mpu:
.word PM_PWSTCTRL_MPU_P
scratchpad_base:
.word SCRATCHPAD_BASE_P
sram_base:
.word SRAM_BASE_P + 0x8000
sdrc_power:
.word SDRC_POWER_V
clk_stabilize_delay:
.word 0x000001FF
assoc_mask:
.word 0x3ff
numset_mask:
.word 0x7fff
ttbrbit_mask:
.word 0xFFFFC000
table_index_mask:
.word 0xFFF00000
table_entry:
.word 0x00000C02
cache_pred_disable_mask:
.word 0xFFFFE7FB
control_stat:
.word CONTROL_STAT
ENTRY(omap34xx_cpu_suspend_sz)
.word . - omap34xx_cpu_suspend
View Git Blame Copy Permalink