kevin/linux
1
Fork 0
Code
fa8f130c50
linux/drivers/net/wireless/iwlwifi/iwl-6000.c
Wey-Yi Guy fa8f130c50 iwlwifi: code cleanup for connectivity recovery 
Split the connectivity check and recovery routine into separated
functions based on the types
   1. iwl_good_ack_health() - check for ack count
   2. iwl_good_plcp_health() - check for plcp error

Based on the type of errors being detected, different recovery methods
will be used to bring the system back to normal operational state.

Because different NIC has different HW and uCode, the behavior is also
different; these functions thus now form part of the ops infrastructure,
so we can have more control on how to monitor and recover from error condition
case per device.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-03-19 13:41:26 -07:00

562 lines
18 KiB
C
Raw Blame History

/******************************************************************************
*
* Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
* The full GNU General Public License is included in this distribution in the
* file called LICENSE.
*
* Contact Information:
* Intel Linux Wireless <ilw@linux.intel.com>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*
*****************************************************************************/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/wireless.h>
#include <net/mac80211.h>
#include <linux/etherdevice.h>
#include <asm/unaligned.h>
#include "iwl-eeprom.h"
#include "iwl-dev.h"
#include "iwl-core.h"
#include "iwl-io.h"
#include "iwl-sta.h"
#include "iwl-agn.h"
#include "iwl-helpers.h"
#include "iwl-5000-hw.h"
#include "iwl-6000-hw.h"
#include "iwl-agn-led.h"
/* Highest firmware API version supported */
#define IWL6000_UCODE_API_MAX 4
#define IWL6050_UCODE_API_MAX 4
/* Lowest firmware API version supported */
#define IWL6000_UCODE_API_MIN 4
#define IWL6050_UCODE_API_MIN 4
#define IWL6000_FW_PRE "iwlwifi-6000-"
#define _IWL6000_MODULE_FIRMWARE(api) IWL6000_FW_PRE #api ".ucode"
#define IWL6000_MODULE_FIRMWARE(api) _IWL6000_MODULE_FIRMWARE(api)
#define IWL6050_FW_PRE "iwlwifi-6050-"
#define _IWL6050_MODULE_FIRMWARE(api) IWL6050_FW_PRE #api ".ucode"
#define IWL6050_MODULE_FIRMWARE(api) _IWL6050_MODULE_FIRMWARE(api)
static void iwl6000_set_ct_threshold(struct iwl_priv *priv)
{
/* want Celsius */
priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD;
priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD;
}
/* Indicate calibration version to uCode. */
static void iwl6050_set_calib_version(struct iwl_priv *priv)
{
if (priv->cfg->ops->lib->eeprom_ops.calib_version(priv) >= 6)
iwl_set_bit(priv, CSR_GP_DRIVER_REG,
CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6);
}
/* NIC configuration for 6000 series */
static void iwl6000_nic_config(struct iwl_priv *priv)
{
u16 radio_cfg;
radio_cfg = iwl_eeprom_query16(priv, EEPROM_RADIO_CONFIG);
/* write radio config values to register */
if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) <= EEPROM_RF_CONFIG_TYPE_MAX)
iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
EEPROM_RF_CFG_TYPE_MSK(radio_cfg) |
EEPROM_RF_CFG_STEP_MSK(radio_cfg) |
EEPROM_RF_CFG_DASH_MSK(radio_cfg));
/* set CSR_HW_CONFIG_REG for uCode use */
iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
/* no locking required for register write */
if (priv->cfg->pa_type == IWL_PA_INTERNAL) {
/* 2x2 IPA phy type */
iwl_write32(priv, CSR_GP_DRIVER_REG,
CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_IPA);
}
/* else do nothing, uCode configured */
if (priv->cfg->ops->lib->temp_ops.set_calib_version)
priv->cfg->ops->lib->temp_ops.set_calib_version(priv);
}
static struct iwl_sensitivity_ranges iwl6000_sensitivity = {
.min_nrg_cck = 97,
.max_nrg_cck = 0, /* not used, set to 0 */
.auto_corr_min_ofdm = 80,
.auto_corr_min_ofdm_mrc = 128,
.auto_corr_min_ofdm_x1 = 105,
.auto_corr_min_ofdm_mrc_x1 = 192,
.auto_corr_max_ofdm = 145,
.auto_corr_max_ofdm_mrc = 232,
.auto_corr_max_ofdm_x1 = 110,
.auto_corr_max_ofdm_mrc_x1 = 232,
.auto_corr_min_cck = 125,
.auto_corr_max_cck = 175,
.auto_corr_min_cck_mrc = 160,
.auto_corr_max_cck_mrc = 310,
.nrg_th_cck = 97,
.nrg_th_ofdm = 100,
.barker_corr_th_min = 190,
.barker_corr_th_min_mrc = 390,
.nrg_th_cca = 62,
};
static int iwl6000_hw_set_hw_params(struct iwl_priv *priv)
{
if (priv->cfg->mod_params->num_of_queues >= IWL_MIN_NUM_QUEUES &&
priv->cfg->mod_params->num_of_queues <= IWL50_NUM_QUEUES)
priv->cfg->num_of_queues =
priv->cfg->mod_params->num_of_queues;
priv->hw_params.max_txq_num = priv->cfg->num_of_queues;
priv->hw_params.dma_chnl_num = FH50_TCSR_CHNL_NUM;
priv->hw_params.scd_bc_tbls_size =
priv->cfg->num_of_queues *
sizeof(struct iwl5000_scd_bc_tbl);
priv->hw_params.tfd_size = sizeof(struct iwl_tfd);
priv->hw_params.max_stations = IWL5000_STATION_COUNT;
priv->hw_params.bcast_sta_id = IWL5000_BROADCAST_ID;
priv->hw_params.max_data_size = IWL60_RTC_DATA_SIZE;
priv->hw_params.max_inst_size = IWL60_RTC_INST_SIZE;
priv->hw_params.max_bsm_size = 0;
priv->hw_params.ht40_channel = BIT(IEEE80211_BAND_2GHZ) |
BIT(IEEE80211_BAND_5GHZ);
priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR;
priv->hw_params.tx_chains_num = num_of_ant(priv->cfg->valid_tx_ant);
priv->hw_params.rx_chains_num = num_of_ant(priv->cfg->valid_rx_ant);
priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant;
priv->hw_params.valid_rx_ant = priv->cfg->valid_rx_ant;
if (priv->cfg->ops->lib->temp_ops.set_ct_kill)
priv->cfg->ops->lib->temp_ops.set_ct_kill(priv);
/* Set initial sensitivity parameters */
/* Set initial calibration set */
priv->hw_params.sens = &iwl6000_sensitivity;
switch (priv->hw_rev & CSR_HW_REV_TYPE_MSK) {
case CSR_HW_REV_TYPE_6x50:
priv->hw_params.calib_init_cfg =
BIT(IWL_CALIB_XTAL) |
BIT(IWL_CALIB_DC) |
BIT(IWL_CALIB_LO) |
BIT(IWL_CALIB_TX_IQ) |
BIT(IWL_CALIB_BASE_BAND);
break;
default:
priv->hw_params.calib_init_cfg =
BIT(IWL_CALIB_XTAL) |
BIT(IWL_CALIB_LO) |
BIT(IWL_CALIB_TX_IQ) |
BIT(IWL_CALIB_BASE_BAND);
break;
}
return 0;
}
static int iwl6000_hw_channel_switch(struct iwl_priv *priv, u16 channel)
{
struct iwl6000_channel_switch_cmd cmd;
const struct iwl_channel_info *ch_info;
struct iwl_host_cmd hcmd = {
.id = REPLY_CHANNEL_SWITCH,
.len = sizeof(cmd),
.flags = CMD_SIZE_HUGE,
.data = &cmd,
};
IWL_DEBUG_11H(priv, "channel switch from %d to %d\n",
priv->active_rxon.channel, channel);
cmd.band = priv->band == IEEE80211_BAND_2GHZ;
cmd.channel = cpu_to_le16(channel);
cmd.rxon_flags = priv->staging_rxon.flags;
cmd.rxon_filter_flags = priv->staging_rxon.filter_flags;
cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
ch_info = iwl_get_channel_info(priv, priv->band, channel);
if (ch_info)
cmd.expect_beacon = is_channel_radar(ch_info);
else {
IWL_ERR(priv, "invalid channel switch from %u to %u\n",
priv->active_rxon.channel, channel);
return -EFAULT;
}
priv->switch_rxon.channel = cpu_to_le16(channel);
priv->switch_rxon.switch_in_progress = true;
return iwl_send_cmd_sync(priv, &hcmd);
}
static struct iwl_lib_ops iwl6000_lib = {
.set_hw_params = iwl6000_hw_set_hw_params,
.txq_update_byte_cnt_tbl = iwl5000_txq_update_byte_cnt_tbl,
.txq_inval_byte_cnt_tbl = iwl5000_txq_inval_byte_cnt_tbl,
.txq_set_sched = iwl5000_txq_set_sched,
.txq_agg_enable = iwl5000_txq_agg_enable,
.txq_agg_disable = iwl5000_txq_agg_disable,
.txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
.txq_free_tfd = iwl_hw_txq_free_tfd,
.txq_init = iwl_hw_tx_queue_init,
.rx_handler_setup = iwl5000_rx_handler_setup,
.setup_deferred_work = iwl5000_setup_deferred_work,
.is_valid_rtc_data_addr = iwl5000_hw_valid_rtc_data_addr,
.load_ucode = iwl5000_load_ucode,
.dump_nic_event_log = iwl_dump_nic_event_log,
.dump_nic_error_log = iwl_dump_nic_error_log,
.dump_csr = iwl_dump_csr,
.dump_fh = iwl_dump_fh,
.init_alive_start = iwl5000_init_alive_start,
.alive_notify = iwl5000_alive_notify,
.send_tx_power = iwl5000_send_tx_power,
.update_chain_flags = iwl_update_chain_flags,
.set_channel_switch = iwl6000_hw_channel_switch,
.apm_ops = {
.init = iwl_apm_init,
.stop = iwl_apm_stop,
.config = iwl6000_nic_config,
.set_pwr_src = iwl_set_pwr_src,
},
.eeprom_ops = {
.regulatory_bands = {
EEPROM_5000_REG_BAND_1_CHANNELS,
EEPROM_5000_REG_BAND_2_CHANNELS,
EEPROM_5000_REG_BAND_3_CHANNELS,
EEPROM_5000_REG_BAND_4_CHANNELS,
EEPROM_5000_REG_BAND_5_CHANNELS,
EEPROM_5000_REG_BAND_24_HT40_CHANNELS,
EEPROM_5000_REG_BAND_52_HT40_CHANNELS
},
.verify_signature = iwlcore_eeprom_verify_signature,
.acquire_semaphore = iwlcore_eeprom_acquire_semaphore,
.release_semaphore = iwlcore_eeprom_release_semaphore,
.calib_version = iwl5000_eeprom_calib_version,
.query_addr = iwl5000_eeprom_query_addr,
.update_enhanced_txpower = iwlcore_eeprom_enhanced_txpower,
},
.post_associate = iwl_post_associate,
.isr = iwl_isr_ict,
.config_ap = iwl_config_ap,
.temp_ops = {
.temperature = iwl5000_temperature,
.set_ct_kill = iwl6000_set_ct_threshold,
},
.add_bcast_station = iwl_add_bcast_station,
.recover_from_tx_stall = iwl_bg_monitor_recover,
.check_plcp_health = iwl_good_plcp_health,
.check_ack_health = iwl_good_ack_health,
};
static const struct iwl_ops iwl6000_ops = {
.ucode = &iwl5000_ucode,
.lib = &iwl6000_lib,
.hcmd = &iwl5000_hcmd,
.utils = &iwl5000_hcmd_utils,
.led = &iwlagn_led_ops,
};
static struct iwl_lib_ops iwl6050_lib = {
.set_hw_params = iwl6000_hw_set_hw_params,
.txq_update_byte_cnt_tbl = iwl5000_txq_update_byte_cnt_tbl,
.txq_inval_byte_cnt_tbl = iwl5000_txq_inval_byte_cnt_tbl,
.txq_set_sched = iwl5000_txq_set_sched,
.txq_agg_enable = iwl5000_txq_agg_enable,
.txq_agg_disable = iwl5000_txq_agg_disable,
.txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
.txq_free_tfd = iwl_hw_txq_free_tfd,
.txq_init = iwl_hw_tx_queue_init,
.rx_handler_setup = iwl5000_rx_handler_setup,
.setup_deferred_work = iwl5000_setup_deferred_work,
.is_valid_rtc_data_addr = iwl5000_hw_valid_rtc_data_addr,
.load_ucode = iwl5000_load_ucode,
.dump_nic_event_log = iwl_dump_nic_event_log,
.dump_nic_error_log = iwl_dump_nic_error_log,
.dump_csr = iwl_dump_csr,
.dump_fh = iwl_dump_fh,
.init_alive_start = iwl5000_init_alive_start,
.alive_notify = iwl5000_alive_notify,
.send_tx_power = iwl5000_send_tx_power,
.update_chain_flags = iwl_update_chain_flags,
.set_channel_switch = iwl6000_hw_channel_switch,
.apm_ops = {
.init = iwl_apm_init,
.stop = iwl_apm_stop,
.config = iwl6000_nic_config,
.set_pwr_src = iwl_set_pwr_src,
},
.eeprom_ops = {
.regulatory_bands = {
EEPROM_5000_REG_BAND_1_CHANNELS,
EEPROM_5000_REG_BAND_2_CHANNELS,
EEPROM_5000_REG_BAND_3_CHANNELS,
EEPROM_5000_REG_BAND_4_CHANNELS,
EEPROM_5000_REG_BAND_5_CHANNELS,
EEPROM_5000_REG_BAND_24_HT40_CHANNELS,
EEPROM_5000_REG_BAND_52_HT40_CHANNELS
},
.verify_signature = iwlcore_eeprom_verify_signature,
.acquire_semaphore = iwlcore_eeprom_acquire_semaphore,
.release_semaphore = iwlcore_eeprom_release_semaphore,
.calib_version = iwl5000_eeprom_calib_version,
.query_addr = iwl5000_eeprom_query_addr,
.update_enhanced_txpower = iwlcore_eeprom_enhanced_txpower,
},
.post_associate = iwl_post_associate,
.isr = iwl_isr_ict,
.config_ap = iwl_config_ap,
.temp_ops = {
.temperature = iwl5000_temperature,
.set_ct_kill = iwl6000_set_ct_threshold,
.set_calib_version = iwl6050_set_calib_version,
},
.add_bcast_station = iwl_add_bcast_station,
.recover_from_tx_stall = iwl_bg_monitor_recover,
.check_plcp_health = iwl_good_plcp_health,
.check_ack_health = iwl_good_ack_health,
};
static const struct iwl_ops iwl6050_ops = {
.ucode = &iwl5000_ucode,
.lib = &iwl6050_lib,
.hcmd = &iwl5000_hcmd,
.utils = &iwl5000_hcmd_utils,
.led = &iwlagn_led_ops,
};
/*
* "i": Internal configuration, use internal Power Amplifier
*/
struct iwl_cfg iwl6000i_2agn_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6200 AGN",
.fw_name_pre = IWL6000_FW_PRE,
.ucode_api_max = IWL6000_UCODE_API_MAX,
.ucode_api_min = IWL6000_UCODE_API_MIN,
.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
.ops = &iwl6000_ops,
.eeprom_size = OTP_LOW_IMAGE_SIZE,
.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
.num_of_queues = IWL50_NUM_QUEUES,
.num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
.mod_params = &iwl50_mod_params,
.valid_tx_ant = ANT_BC,
.valid_rx_ant = ANT_BC,
.pll_cfg_val = 0,
.set_l0s = true,
.use_bsm = false,
.pa_type = IWL_PA_INTERNAL,
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
.ht_greenfield_support = true,
.led_compensation = 51,
.use_rts_for_ht = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
.adv_thermal_throttle = true,
.support_ct_kill_exit = true,
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
.chain_noise_scale = 1000,
.monitor_recover_period = IWL_MONITORING_PERIOD,
};
struct iwl_cfg iwl6000i_2abg_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6200 ABG",
.fw_name_pre = IWL6000_FW_PRE,
.ucode_api_max = IWL6000_UCODE_API_MAX,
.ucode_api_min = IWL6000_UCODE_API_MIN,
.sku = IWL_SKU_A|IWL_SKU_G,
.ops = &iwl6000_ops,
.eeprom_size = OTP_LOW_IMAGE_SIZE,
.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
.num_of_queues = IWL50_NUM_QUEUES,
.num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
.mod_params = &iwl50_mod_params,
.valid_tx_ant = ANT_BC,
.valid_rx_ant = ANT_BC,
.pll_cfg_val = 0,
.set_l0s = true,
.use_bsm = false,
.pa_type = IWL_PA_INTERNAL,
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
.ht_greenfield_support = true,
.led_compensation = 51,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
.adv_thermal_throttle = true,
.support_ct_kill_exit = true,
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
.chain_noise_scale = 1000,
.monitor_recover_period = IWL_MONITORING_PERIOD,
};
struct iwl_cfg iwl6000i_2bg_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6200 BG",
.fw_name_pre = IWL6000_FW_PRE,
.ucode_api_max = IWL6000_UCODE_API_MAX,
.ucode_api_min = IWL6000_UCODE_API_MIN,
.sku = IWL_SKU_G,
.ops = &iwl6000_ops,
.eeprom_size = OTP_LOW_IMAGE_SIZE,
.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
.num_of_queues = IWL50_NUM_QUEUES,
.num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
.mod_params = &iwl50_mod_params,
.valid_tx_ant = ANT_BC,
.valid_rx_ant = ANT_BC,
.pll_cfg_val = 0,
.set_l0s = true,
.use_bsm = false,
.pa_type = IWL_PA_INTERNAL,
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
.ht_greenfield_support = true,
.led_compensation = 51,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
.adv_thermal_throttle = true,
.support_ct_kill_exit = true,
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
.chain_noise_scale = 1000,
.monitor_recover_period = IWL_MONITORING_PERIOD,
};
struct iwl_cfg iwl6050_2agn_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 AGN",
.fw_name_pre = IWL6050_FW_PRE,
.ucode_api_max = IWL6050_UCODE_API_MAX,
.ucode_api_min = IWL6050_UCODE_API_MIN,
.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
.ops = &iwl6050_ops,
.eeprom_size = OTP_LOW_IMAGE_SIZE,
.eeprom_ver = EEPROM_6050_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
.num_of_queues = IWL50_NUM_QUEUES,
.num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
.mod_params = &iwl50_mod_params,
.valid_tx_ant = ANT_AB,
.valid_rx_ant = ANT_AB,
.pll_cfg_val = 0,
.set_l0s = true,
.use_bsm = false,
.pa_type = IWL_PA_SYSTEM,
.max_ll_items = OTP_MAX_LL_ITEMS_6x50,
.shadow_ram_support = true,
.ht_greenfield_support = true,
.led_compensation = 51,
.use_rts_for_ht = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
.adv_thermal_throttle = true,
.support_ct_kill_exit = true,
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
.chain_noise_scale = 1500,
.monitor_recover_period = IWL_MONITORING_PERIOD,
};
struct iwl_cfg iwl6050_2abg_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 ABG",
.fw_name_pre = IWL6050_FW_PRE,
.ucode_api_max = IWL6050_UCODE_API_MAX,
.ucode_api_min = IWL6050_UCODE_API_MIN,
.sku = IWL_SKU_A|IWL_SKU_G,
.ops = &iwl6050_ops,
.eeprom_size = OTP_LOW_IMAGE_SIZE,
.eeprom_ver = EEPROM_6050_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
.num_of_queues = IWL50_NUM_QUEUES,
.num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
.mod_params = &iwl50_mod_params,
.valid_tx_ant = ANT_AB,
.valid_rx_ant = ANT_AB,
.pll_cfg_val = 0,
.set_l0s = true,
.use_bsm = false,
.pa_type = IWL_PA_SYSTEM,
.max_ll_items = OTP_MAX_LL_ITEMS_6x50,
.shadow_ram_support = true,
.ht_greenfield_support = true,
.led_compensation = 51,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
.adv_thermal_throttle = true,
.support_ct_kill_exit = true,
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
.chain_noise_scale = 1500,
.monitor_recover_period = IWL_MONITORING_PERIOD,
};
struct iwl_cfg iwl6000_3agn_cfg = {
.name = "Intel(R) Centrino(R) Ultimate-N 6300 AGN",
.fw_name_pre = IWL6000_FW_PRE,
.ucode_api_max = IWL6000_UCODE_API_MAX,
.ucode_api_min = IWL6000_UCODE_API_MIN,
.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
.ops = &iwl6000_ops,
.eeprom_size = OTP_LOW_IMAGE_SIZE,
.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
.num_of_queues = IWL50_NUM_QUEUES,
.num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
.mod_params = &iwl50_mod_params,
.valid_tx_ant = ANT_ABC,
.valid_rx_ant = ANT_ABC,
.pll_cfg_val = 0,
.set_l0s = true,
.use_bsm = false,
.pa_type = IWL_PA_SYSTEM,
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
.ht_greenfield_support = true,
.led_compensation = 51,
.use_rts_for_ht = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
.adv_thermal_throttle = true,
.support_ct_kill_exit = true,
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
.chain_noise_scale = 1000,
.monitor_recover_period = IWL_MONITORING_PERIOD,
};
MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX));
MODULE_FIRMWARE(IWL6050_MODULE_FIRMWARE(IWL6050_UCODE_API_MAX));
View Git Blame Copy Permalink