1
linux/include/asm-powerpc/machdep.h
Benjamin Herrenschmidt 0ebfff1491 [POWERPC] Add new interrupt mapping core and change platforms to use it
This adds the new irq remapper core and removes the old one.  Because
there are some fundamental conflicts with the old code, like the value
of NO_IRQ which I'm now setting to 0 (as per discussions with Linus),
etc..., this commit also changes the relevant platform and driver code
over to use the new remapper (so as not to cause difficulties later
in bisecting).

This patch removes the old pre-parsing of the open firmware interrupt
tree along with all the bogus assumptions it made to try to renumber
interrupts according to the platform. This is all to be handled by the
new code now.

For the pSeries XICS interrupt controller, a single remapper host is
created for the whole machine regardless of how many interrupt
presentation and source controllers are found, and it's set to match
any device node that isn't a 8259.  That works fine on pSeries and
avoids having to deal with some of the complexities of split source
controllers vs. presentation controllers in the pSeries device trees.

The powerpc i8259 PIC driver now always requests the legacy interrupt
range. It also has the feature of being able to match any device node
(including NULL) if passed no device node as an input. That will help
porting over platforms with broken device-trees like Pegasos who don't
have a proper interrupt tree.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-03 21:36:01 +10:00

321 lines
9.3 KiB
C

#ifndef _ASM_POWERPC_MACHDEP_H
#define _ASM_POWERPC_MACHDEP_H
#ifdef __KERNEL__
/*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/seq_file.h>
#include <linux/init.h>
#include <linux/dma-mapping.h>
#include <asm/setup.h>
/* We export this macro for external modules like Alsa to know if
* ppc_md.feature_call is implemented or not
*/
#define CONFIG_PPC_HAS_FEATURE_CALLS
struct pt_regs;
struct pci_bus;
struct device_node;
struct iommu_table;
struct rtc_time;
struct file;
#ifdef CONFIG_KEXEC
struct kimage;
#endif
#ifdef CONFIG_SMP
struct smp_ops_t {
void (*message_pass)(int target, int msg);
int (*probe)(void);
void (*kick_cpu)(int nr);
void (*setup_cpu)(int nr);
void (*take_timebase)(void);
void (*give_timebase)(void);
int (*cpu_enable)(unsigned int nr);
int (*cpu_disable)(void);
void (*cpu_die)(unsigned int nr);
int (*cpu_bootable)(unsigned int nr);
};
#endif
struct machdep_calls {
char *name;
#ifdef CONFIG_PPC64
void (*hpte_invalidate)(unsigned long slot,
unsigned long va,
int psize,
int local);
long (*hpte_updatepp)(unsigned long slot,
unsigned long newpp,
unsigned long va,
int pize,
int local);
void (*hpte_updateboltedpp)(unsigned long newpp,
unsigned long ea,
int psize);
long (*hpte_insert)(unsigned long hpte_group,
unsigned long va,
unsigned long prpn,
unsigned long rflags,
unsigned long vflags,
int psize);
long (*hpte_remove)(unsigned long hpte_group);
void (*flush_hash_range)(unsigned long number, int local);
/* special for kexec, to be called in real mode, linar mapping is
* destroyed as well */
void (*hpte_clear_all)(void);
void (*tce_build)(struct iommu_table * tbl,
long index,
long npages,
unsigned long uaddr,
enum dma_data_direction direction);
void (*tce_free)(struct iommu_table *tbl,
long index,
long npages);
unsigned long (*tce_get)(struct iommu_table *tbl,
long index);
void (*tce_flush)(struct iommu_table *tbl);
void (*iommu_dev_setup)(struct pci_dev *dev);
void (*iommu_bus_setup)(struct pci_bus *bus);
void (*irq_bus_setup)(struct pci_bus *bus);
#endif /* CONFIG_PPC64 */
int (*probe)(void);
void (*setup_arch)(void);
void (*init_early)(void);
/* Optional, may be NULL. */
void (*show_cpuinfo)(struct seq_file *m);
void (*show_percpuinfo)(struct seq_file *m, int i);
void (*init_IRQ)(void);
unsigned int (*get_irq)(struct pt_regs *);
#ifdef CONFIG_KEXEC
void (*kexec_cpu_down)(int crash_shutdown, int secondary);
#endif
/* PCI stuff */
/* Called after scanning the bus, before allocating resources */
void (*pcibios_fixup)(void);
int (*pci_probe_mode)(struct pci_bus *);
void (*restart)(char *cmd);
void (*power_off)(void);
void (*halt)(void);
void (*panic)(char *str);
void (*cpu_die)(void);
long (*time_init)(void); /* Optional, may be NULL */
int (*set_rtc_time)(struct rtc_time *);
void (*get_rtc_time)(struct rtc_time *);
unsigned long (*get_boot_time)(void);
unsigned char (*rtc_read_val)(int addr);
void (*rtc_write_val)(int addr, unsigned char val);
void (*calibrate_decr)(void);
void (*progress)(char *, unsigned short);
/* Interface for platform error logging */
void (*log_error)(char *buf, unsigned int err_type, int fatal);
unsigned char (*nvram_read_val)(int addr);
void (*nvram_write_val)(int addr, unsigned char val);
ssize_t (*nvram_write)(char *buf, size_t count, loff_t *index);
ssize_t (*nvram_read)(char *buf, size_t count, loff_t *index);
ssize_t (*nvram_size)(void);
void (*nvram_sync)(void);
/* Exception handlers */
int (*system_reset_exception)(struct pt_regs *regs);
int (*machine_check_exception)(struct pt_regs *regs);
/* Motherboard/chipset features. This is a kind of general purpose
* hook used to control some machine specific features (like reset
* lines, chip power control, etc...).
*/
long (*feature_call)(unsigned int feature, ...);
/* Check availability of legacy devices like i8042 */
int (*check_legacy_ioport)(unsigned int baseport);
/* Get legacy PCI/IDE interrupt mapping */
int (*pci_get_legacy_ide_irq)(struct pci_dev *dev, int channel);
/* Get access protection for /dev/mem */
pgprot_t (*phys_mem_access_prot)(struct file *file,
unsigned long pfn,
unsigned long size,
pgprot_t vma_prot);
/* Idle loop for this platform, leave empty for default idle loop */
void (*idle_loop)(void);
/*
* Function for waiting for work with reduced power in idle loop;
* called with interrupts disabled.
*/
void (*power_save)(void);
/* Function to enable performance monitor counters for this
platform, called once per cpu. */
void (*enable_pmcs)(void);
/* Set DABR for this platform, leave empty for default implemenation */
int (*set_dabr)(unsigned long dabr);
#ifdef CONFIG_PPC32 /* XXX for now */
/* A general init function, called by ppc_init in init/main.c.
May be NULL. */
void (*init)(void);
void (*setup_io_mappings)(void);
void (*early_serial_map)(void);
void (*kgdb_map_scc)(void);
/*
* optional PCI "hooks"
*/
/* Called after PPC generic resource fixup to perform
machine specific fixups */
void (*pcibios_fixup_resources)(struct pci_dev *);
/* Called for each PCI bus in the system when it's probed */
void (*pcibios_fixup_bus)(struct pci_bus *);
/* Called when pci_enable_device() is called (initial=0) or
* when a device with no assigned resource is found (initial=1).
* Returns 0 to allow assignment/enabling of the device. */
int (*pcibios_enable_device_hook)(struct pci_dev *, int initial);
/* For interrupt routing */
unsigned char (*pci_swizzle)(struct pci_dev *, unsigned char *);
int (*pci_map_irq)(struct pci_dev *, unsigned char, unsigned char);
/* Called in indirect_* to avoid touching devices */
int (*pci_exclude_device)(unsigned char, unsigned char);
/* Called at then very end of pcibios_init() */
void (*pcibios_after_init)(void);
#endif /* CONFIG_PPC32 */
/* Called to shutdown machine specific hardware not already controlled
* by other drivers.
*/
void (*machine_shutdown)(void);
#ifdef CONFIG_KEXEC
/* Called to do the minimal shutdown needed to run a kexec'd kernel
* to run successfully.
* XXX Should we move this one out of kexec scope?
*/
void (*machine_crash_shutdown)(struct pt_regs *regs);
/* Called to do what every setup is needed on image and the
* reboot code buffer. Returns 0 on success.
* Provide your own (maybe dummy) implementation if your platform
* claims to support kexec.
*/
int (*machine_kexec_prepare)(struct kimage *image);
/* Called to handle any machine specific cleanup on image */
void (*machine_kexec_cleanup)(struct kimage *image);
/* Called to perform the _real_ kexec.
* Do NOT allocate memory or fail here. We are past the point of
* no return.
*/
void (*machine_kexec)(struct kimage *image);
#endif /* CONFIG_KEXEC */
#ifdef CONFIG_PCI_MSI
int (*enable_msi)(struct pci_dev *pdev);
void (*disable_msi)(struct pci_dev *pdev);
#endif /* CONFIG_PCI_MSI */
};
extern void power4_idle(void);
extern void ppc6xx_idle(void);
/*
* ppc_md contains a copy of the machine description structure for the
* current platform. machine_id contains the initial address where the
* description was found during boot.
*/
extern struct machdep_calls ppc_md;
extern struct machdep_calls *machine_id;
#define __machine_desc __attribute__ ((__section__ (".machine.desc")))
#define define_machine(name) \
extern struct machdep_calls mach_##name; \
EXPORT_SYMBOL(mach_##name); \
struct machdep_calls mach_##name __machine_desc =
#define machine_is(name) \
({ \
extern struct machdep_calls mach_##name \
__attribute__((weak)); \
machine_id == &mach_##name; \
})
extern void probe_machine(void);
extern char cmd_line[COMMAND_LINE_SIZE];
#ifdef CONFIG_PPC_PMAC
/*
* Power macintoshes have either a CUDA, PMU or SMU controlling
* system reset, power, NVRAM, RTC.
*/
typedef enum sys_ctrler_kind {
SYS_CTRLER_UNKNOWN = 0,
SYS_CTRLER_CUDA = 1,
SYS_CTRLER_PMU = 2,
SYS_CTRLER_SMU = 3,
} sys_ctrler_t;
extern sys_ctrler_t sys_ctrler;
#endif /* CONFIG_PPC_PMAC */
extern void setup_pci_ptrs(void);
#ifdef CONFIG_SMP
/* Poor default implementations */
extern void __devinit smp_generic_give_timebase(void);
extern void __devinit smp_generic_take_timebase(void);
#endif /* CONFIG_SMP */
/* Functions to produce codes on the leds.
* The SRC code should be unique for the message category and should
* be limited to the lower 24 bits (the upper 8 are set by these funcs),
* and (for boot & dump) should be sorted numerically in the order
* the events occur.
*/
/* Print a boot progress message. */
void ppc64_boot_msg(unsigned int src, const char *msg);
/* Print a termination message (print only -- does not stop the kernel) */
void ppc64_terminate_msg(unsigned int src, const char *msg);
static inline void log_error(char *buf, unsigned int err_type, int fatal)
{
if (ppc_md.log_error)
ppc_md.log_error(buf, err_type, fatal);
}
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_MACHDEP_H */