f41737ece4
s_std didn't belong in the tuner ops. Stricly speaking it should be part of the video ops, but it is used by audio and tuner devices as well, so it is more efficient to make it part of the core ops. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
656 lines
15 KiB
C
656 lines
15 KiB
C
/*
|
|
* saa7191.c - Philips SAA7191 video decoder driver
|
|
*
|
|
* Copyright (C) 2003 Ladislav Michl <ladis@linux-mips.org>
|
|
* Copyright (C) 2004,2005 Mikael Nousiainen <tmnousia@cc.hut.fi>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/major.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/videodev2.h>
|
|
#include <linux/i2c.h>
|
|
#include <media/v4l2-device.h>
|
|
#include <media/v4l2-chip-ident.h>
|
|
#include <media/v4l2-i2c-drv.h>
|
|
|
|
#include "saa7191.h"
|
|
|
|
#define SAA7191_MODULE_VERSION "0.0.5"
|
|
|
|
MODULE_DESCRIPTION("Philips SAA7191 video decoder driver");
|
|
MODULE_VERSION(SAA7191_MODULE_VERSION);
|
|
MODULE_AUTHOR("Mikael Nousiainen <tmnousia@cc.hut.fi>");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
|
|
// #define SAA7191_DEBUG
|
|
|
|
#ifdef SAA7191_DEBUG
|
|
#define dprintk(x...) printk("SAA7191: " x);
|
|
#else
|
|
#define dprintk(x...)
|
|
#endif
|
|
|
|
#define SAA7191_SYNC_COUNT 30
|
|
#define SAA7191_SYNC_DELAY 100 /* milliseconds */
|
|
|
|
struct saa7191 {
|
|
struct v4l2_subdev sd;
|
|
|
|
/* the register values are stored here as the actual
|
|
* I2C-registers are write-only */
|
|
u8 reg[25];
|
|
|
|
int input;
|
|
v4l2_std_id norm;
|
|
};
|
|
|
|
static inline struct saa7191 *to_saa7191(struct v4l2_subdev *sd)
|
|
{
|
|
return container_of(sd, struct saa7191, sd);
|
|
}
|
|
|
|
static const u8 initseq[] = {
|
|
0, /* Subaddress */
|
|
|
|
0x50, /* (0x50) SAA7191_REG_IDEL */
|
|
|
|
/* 50 Hz signal timing */
|
|
0x30, /* (0x30) SAA7191_REG_HSYB */
|
|
0x00, /* (0x00) SAA7191_REG_HSYS */
|
|
0xe8, /* (0xe8) SAA7191_REG_HCLB */
|
|
0xb6, /* (0xb6) SAA7191_REG_HCLS */
|
|
0xf4, /* (0xf4) SAA7191_REG_HPHI */
|
|
|
|
/* control */
|
|
SAA7191_LUMA_APER_1, /* (0x01) SAA7191_REG_LUMA - CVBS mode */
|
|
0x00, /* (0x00) SAA7191_REG_HUEC */
|
|
0xf8, /* (0xf8) SAA7191_REG_CKTQ */
|
|
0xf8, /* (0xf8) SAA7191_REG_CKTS */
|
|
0x90, /* (0x90) SAA7191_REG_PLSE */
|
|
0x90, /* (0x90) SAA7191_REG_SESE */
|
|
0x00, /* (0x00) SAA7191_REG_GAIN */
|
|
SAA7191_STDC_NFEN | SAA7191_STDC_HRMV, /* (0x0c) SAA7191_REG_STDC
|
|
* - not SECAM,
|
|
* slow time constant */
|
|
SAA7191_IOCK_OEDC | SAA7191_IOCK_OEHS | SAA7191_IOCK_OEVS
|
|
| SAA7191_IOCK_OEDY, /* (0x78) SAA7191_REG_IOCK
|
|
* - chroma from CVBS, GPSW1 & 2 off */
|
|
SAA7191_CTL3_AUFD | SAA7191_CTL3_SCEN | SAA7191_CTL3_OFTS
|
|
| SAA7191_CTL3_YDEL0, /* (0x99) SAA7191_REG_CTL3
|
|
* - automatic field detection */
|
|
0x00, /* (0x00) SAA7191_REG_CTL4 */
|
|
0x2c, /* (0x2c) SAA7191_REG_CHCV - PAL nominal value */
|
|
0x00, /* unused */
|
|
0x00, /* unused */
|
|
|
|
/* 60 Hz signal timing */
|
|
0x34, /* (0x34) SAA7191_REG_HS6B */
|
|
0x0a, /* (0x0a) SAA7191_REG_HS6S */
|
|
0xf4, /* (0xf4) SAA7191_REG_HC6B */
|
|
0xce, /* (0xce) SAA7191_REG_HC6S */
|
|
0xf4, /* (0xf4) SAA7191_REG_HP6I */
|
|
};
|
|
|
|
/* SAA7191 register handling */
|
|
|
|
static u8 saa7191_read_reg(struct v4l2_subdev *sd, u8 reg)
|
|
{
|
|
return to_saa7191(sd)->reg[reg];
|
|
}
|
|
|
|
static int saa7191_read_status(struct v4l2_subdev *sd, u8 *value)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
int ret;
|
|
|
|
ret = i2c_master_recv(client, value, 1);
|
|
if (ret < 0) {
|
|
printk(KERN_ERR "SAA7191: saa7191_read_status(): read failed\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int saa7191_write_reg(struct v4l2_subdev *sd, u8 reg, u8 value)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
|
|
to_saa7191(sd)->reg[reg] = value;
|
|
return i2c_smbus_write_byte_data(client, reg, value);
|
|
}
|
|
|
|
/* the first byte of data must be the first subaddress number (register) */
|
|
static int saa7191_write_block(struct v4l2_subdev *sd,
|
|
u8 length, const u8 *data)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
struct saa7191 *decoder = to_saa7191(sd);
|
|
int i;
|
|
int ret;
|
|
|
|
for (i = 0; i < (length - 1); i++) {
|
|
decoder->reg[data[0] + i] = data[i + 1];
|
|
}
|
|
|
|
ret = i2c_master_send(client, data, length);
|
|
if (ret < 0) {
|
|
printk(KERN_ERR "SAA7191: saa7191_write_block(): "
|
|
"write failed\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Helper functions */
|
|
|
|
static int saa7191_s_routing(struct v4l2_subdev *sd,
|
|
const struct v4l2_routing *route)
|
|
{
|
|
struct saa7191 *decoder = to_saa7191(sd);
|
|
u8 luma = saa7191_read_reg(sd, SAA7191_REG_LUMA);
|
|
u8 iock = saa7191_read_reg(sd, SAA7191_REG_IOCK);
|
|
int err;
|
|
|
|
switch (route->input) {
|
|
case SAA7191_INPUT_COMPOSITE: /* Set Composite input */
|
|
iock &= ~(SAA7191_IOCK_CHRS | SAA7191_IOCK_GPSW1
|
|
| SAA7191_IOCK_GPSW2);
|
|
/* Chrominance trap active */
|
|
luma &= ~SAA7191_LUMA_BYPS;
|
|
break;
|
|
case SAA7191_INPUT_SVIDEO: /* Set S-Video input */
|
|
iock |= SAA7191_IOCK_CHRS | SAA7191_IOCK_GPSW2;
|
|
/* Chrominance trap bypassed */
|
|
luma |= SAA7191_LUMA_BYPS;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
err = saa7191_write_reg(sd, SAA7191_REG_LUMA, luma);
|
|
if (err)
|
|
return -EIO;
|
|
err = saa7191_write_reg(sd, SAA7191_REG_IOCK, iock);
|
|
if (err)
|
|
return -EIO;
|
|
|
|
decoder->input = route->input;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int saa7191_s_std(struct v4l2_subdev *sd, v4l2_std_id norm)
|
|
{
|
|
struct saa7191 *decoder = to_saa7191(sd);
|
|
u8 stdc = saa7191_read_reg(sd, SAA7191_REG_STDC);
|
|
u8 ctl3 = saa7191_read_reg(sd, SAA7191_REG_CTL3);
|
|
u8 chcv = saa7191_read_reg(sd, SAA7191_REG_CHCV);
|
|
int err;
|
|
|
|
if (norm & V4L2_STD_PAL) {
|
|
stdc &= ~SAA7191_STDC_SECS;
|
|
ctl3 &= ~(SAA7191_CTL3_AUFD | SAA7191_CTL3_FSEL);
|
|
chcv = SAA7191_CHCV_PAL;
|
|
} else if (norm & V4L2_STD_NTSC) {
|
|
stdc &= ~SAA7191_STDC_SECS;
|
|
ctl3 &= ~SAA7191_CTL3_AUFD;
|
|
ctl3 |= SAA7191_CTL3_FSEL;
|
|
chcv = SAA7191_CHCV_NTSC;
|
|
} else if (norm & V4L2_STD_SECAM) {
|
|
stdc |= SAA7191_STDC_SECS;
|
|
ctl3 &= ~(SAA7191_CTL3_AUFD | SAA7191_CTL3_FSEL);
|
|
chcv = SAA7191_CHCV_PAL;
|
|
} else {
|
|
return -EINVAL;
|
|
}
|
|
|
|
err = saa7191_write_reg(sd, SAA7191_REG_CTL3, ctl3);
|
|
if (err)
|
|
return -EIO;
|
|
err = saa7191_write_reg(sd, SAA7191_REG_STDC, stdc);
|
|
if (err)
|
|
return -EIO;
|
|
err = saa7191_write_reg(sd, SAA7191_REG_CHCV, chcv);
|
|
if (err)
|
|
return -EIO;
|
|
|
|
decoder->norm = norm;
|
|
|
|
dprintk("ctl3: %02x stdc: %02x chcv: %02x\n", ctl3,
|
|
stdc, chcv);
|
|
dprintk("norm: %llx\n", norm);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int saa7191_wait_for_signal(struct v4l2_subdev *sd, u8 *status)
|
|
{
|
|
int i = 0;
|
|
|
|
dprintk("Checking for signal...\n");
|
|
|
|
for (i = 0; i < SAA7191_SYNC_COUNT; i++) {
|
|
if (saa7191_read_status(sd, status))
|
|
return -EIO;
|
|
|
|
if (((*status) & SAA7191_STATUS_HLCK) == 0) {
|
|
dprintk("Signal found\n");
|
|
return 0;
|
|
}
|
|
|
|
msleep(SAA7191_SYNC_DELAY);
|
|
}
|
|
|
|
dprintk("No signal\n");
|
|
|
|
return -EBUSY;
|
|
}
|
|
|
|
static int saa7191_querystd(struct v4l2_subdev *sd, v4l2_std_id *norm)
|
|
{
|
|
struct saa7191 *decoder = to_saa7191(sd);
|
|
u8 stdc = saa7191_read_reg(sd, SAA7191_REG_STDC);
|
|
u8 ctl3 = saa7191_read_reg(sd, SAA7191_REG_CTL3);
|
|
u8 status;
|
|
v4l2_std_id old_norm = decoder->norm;
|
|
int err = 0;
|
|
|
|
dprintk("SAA7191 extended signal auto-detection...\n");
|
|
|
|
*norm = V4L2_STD_NTSC | V4L2_STD_PAL | V4L2_STD_SECAM;
|
|
stdc &= ~SAA7191_STDC_SECS;
|
|
ctl3 &= ~(SAA7191_CTL3_FSEL);
|
|
|
|
err = saa7191_write_reg(sd, SAA7191_REG_STDC, stdc);
|
|
if (err) {
|
|
err = -EIO;
|
|
goto out;
|
|
}
|
|
err = saa7191_write_reg(sd, SAA7191_REG_CTL3, ctl3);
|
|
if (err) {
|
|
err = -EIO;
|
|
goto out;
|
|
}
|
|
|
|
ctl3 |= SAA7191_CTL3_AUFD;
|
|
err = saa7191_write_reg(sd, SAA7191_REG_CTL3, ctl3);
|
|
if (err) {
|
|
err = -EIO;
|
|
goto out;
|
|
}
|
|
|
|
msleep(SAA7191_SYNC_DELAY);
|
|
|
|
err = saa7191_wait_for_signal(sd, &status);
|
|
if (err)
|
|
goto out;
|
|
|
|
if (status & SAA7191_STATUS_FIDT) {
|
|
/* 60Hz signal -> NTSC */
|
|
dprintk("60Hz signal: NTSC\n");
|
|
*norm = V4L2_STD_NTSC;
|
|
return 0;
|
|
}
|
|
|
|
/* 50Hz signal */
|
|
dprintk("50Hz signal: Trying PAL...\n");
|
|
|
|
/* try PAL first */
|
|
err = saa7191_s_std(sd, V4L2_STD_PAL);
|
|
if (err)
|
|
goto out;
|
|
|
|
msleep(SAA7191_SYNC_DELAY);
|
|
|
|
err = saa7191_wait_for_signal(sd, &status);
|
|
if (err)
|
|
goto out;
|
|
|
|
/* not 50Hz ? */
|
|
if (status & SAA7191_STATUS_FIDT) {
|
|
dprintk("No 50Hz signal\n");
|
|
saa7191_s_std(sd, old_norm);
|
|
return -EAGAIN;
|
|
}
|
|
|
|
if (status & SAA7191_STATUS_CODE) {
|
|
dprintk("PAL\n");
|
|
*norm = V4L2_STD_PAL;
|
|
return saa7191_s_std(sd, old_norm);
|
|
}
|
|
|
|
dprintk("No color detected with PAL - Trying SECAM...\n");
|
|
|
|
/* no color detected ? -> try SECAM */
|
|
err = saa7191_s_std(sd, V4L2_STD_SECAM);
|
|
if (err)
|
|
goto out;
|
|
|
|
msleep(SAA7191_SYNC_DELAY);
|
|
|
|
err = saa7191_wait_for_signal(sd, &status);
|
|
if (err)
|
|
goto out;
|
|
|
|
/* not 50Hz ? */
|
|
if (status & SAA7191_STATUS_FIDT) {
|
|
dprintk("No 50Hz signal\n");
|
|
err = -EAGAIN;
|
|
goto out;
|
|
}
|
|
|
|
if (status & SAA7191_STATUS_CODE) {
|
|
/* Color detected -> SECAM */
|
|
dprintk("SECAM\n");
|
|
*norm = V4L2_STD_SECAM;
|
|
return saa7191_s_std(sd, old_norm);
|
|
}
|
|
|
|
dprintk("No color detected with SECAM - Going back to PAL.\n");
|
|
|
|
out:
|
|
return saa7191_s_std(sd, old_norm);
|
|
}
|
|
|
|
static int saa7191_autodetect_norm(struct v4l2_subdev *sd)
|
|
{
|
|
u8 status;
|
|
|
|
dprintk("SAA7191 signal auto-detection...\n");
|
|
|
|
dprintk("Reading status...\n");
|
|
|
|
if (saa7191_read_status(sd, &status))
|
|
return -EIO;
|
|
|
|
dprintk("Checking for signal...\n");
|
|
|
|
/* no signal ? */
|
|
if (status & SAA7191_STATUS_HLCK) {
|
|
dprintk("No signal\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
dprintk("Signal found\n");
|
|
|
|
if (status & SAA7191_STATUS_FIDT) {
|
|
/* 60hz signal -> NTSC */
|
|
dprintk("NTSC\n");
|
|
return saa7191_s_std(sd, V4L2_STD_NTSC);
|
|
} else {
|
|
/* 50hz signal -> PAL */
|
|
dprintk("PAL\n");
|
|
return saa7191_s_std(sd, V4L2_STD_PAL);
|
|
}
|
|
}
|
|
|
|
static int saa7191_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
|
|
{
|
|
u8 reg;
|
|
int ret = 0;
|
|
|
|
switch (ctrl->id) {
|
|
case SAA7191_CONTROL_BANDPASS:
|
|
case SAA7191_CONTROL_BANDPASS_WEIGHT:
|
|
case SAA7191_CONTROL_CORING:
|
|
reg = saa7191_read_reg(sd, SAA7191_REG_LUMA);
|
|
switch (ctrl->id) {
|
|
case SAA7191_CONTROL_BANDPASS:
|
|
ctrl->value = ((s32)reg & SAA7191_LUMA_BPSS_MASK)
|
|
>> SAA7191_LUMA_BPSS_SHIFT;
|
|
break;
|
|
case SAA7191_CONTROL_BANDPASS_WEIGHT:
|
|
ctrl->value = ((s32)reg & SAA7191_LUMA_APER_MASK)
|
|
>> SAA7191_LUMA_APER_SHIFT;
|
|
break;
|
|
case SAA7191_CONTROL_CORING:
|
|
ctrl->value = ((s32)reg & SAA7191_LUMA_CORI_MASK)
|
|
>> SAA7191_LUMA_CORI_SHIFT;
|
|
break;
|
|
}
|
|
break;
|
|
case SAA7191_CONTROL_FORCE_COLOUR:
|
|
case SAA7191_CONTROL_CHROMA_GAIN:
|
|
reg = saa7191_read_reg(sd, SAA7191_REG_GAIN);
|
|
if (ctrl->id == SAA7191_CONTROL_FORCE_COLOUR)
|
|
ctrl->value = ((s32)reg & SAA7191_GAIN_COLO) ? 1 : 0;
|
|
else
|
|
ctrl->value = ((s32)reg & SAA7191_GAIN_LFIS_MASK)
|
|
>> SAA7191_GAIN_LFIS_SHIFT;
|
|
break;
|
|
case V4L2_CID_HUE:
|
|
reg = saa7191_read_reg(sd, SAA7191_REG_HUEC);
|
|
if (reg < 0x80)
|
|
reg += 0x80;
|
|
else
|
|
reg -= 0x80;
|
|
ctrl->value = (s32)reg;
|
|
break;
|
|
case SAA7191_CONTROL_VTRC:
|
|
reg = saa7191_read_reg(sd, SAA7191_REG_STDC);
|
|
ctrl->value = ((s32)reg & SAA7191_STDC_VTRC) ? 1 : 0;
|
|
break;
|
|
case SAA7191_CONTROL_LUMA_DELAY:
|
|
reg = saa7191_read_reg(sd, SAA7191_REG_CTL3);
|
|
ctrl->value = ((s32)reg & SAA7191_CTL3_YDEL_MASK)
|
|
>> SAA7191_CTL3_YDEL_SHIFT;
|
|
if (ctrl->value >= 4)
|
|
ctrl->value -= 8;
|
|
break;
|
|
case SAA7191_CONTROL_VNR:
|
|
reg = saa7191_read_reg(sd, SAA7191_REG_CTL4);
|
|
ctrl->value = ((s32)reg & SAA7191_CTL4_VNOI_MASK)
|
|
>> SAA7191_CTL4_VNOI_SHIFT;
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int saa7191_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
|
|
{
|
|
u8 reg;
|
|
int ret = 0;
|
|
|
|
switch (ctrl->id) {
|
|
case SAA7191_CONTROL_BANDPASS:
|
|
case SAA7191_CONTROL_BANDPASS_WEIGHT:
|
|
case SAA7191_CONTROL_CORING:
|
|
reg = saa7191_read_reg(sd, SAA7191_REG_LUMA);
|
|
switch (ctrl->id) {
|
|
case SAA7191_CONTROL_BANDPASS:
|
|
reg &= ~SAA7191_LUMA_BPSS_MASK;
|
|
reg |= (ctrl->value << SAA7191_LUMA_BPSS_SHIFT)
|
|
& SAA7191_LUMA_BPSS_MASK;
|
|
break;
|
|
case SAA7191_CONTROL_BANDPASS_WEIGHT:
|
|
reg &= ~SAA7191_LUMA_APER_MASK;
|
|
reg |= (ctrl->value << SAA7191_LUMA_APER_SHIFT)
|
|
& SAA7191_LUMA_APER_MASK;
|
|
break;
|
|
case SAA7191_CONTROL_CORING:
|
|
reg &= ~SAA7191_LUMA_CORI_MASK;
|
|
reg |= (ctrl->value << SAA7191_LUMA_CORI_SHIFT)
|
|
& SAA7191_LUMA_CORI_MASK;
|
|
break;
|
|
}
|
|
ret = saa7191_write_reg(sd, SAA7191_REG_LUMA, reg);
|
|
break;
|
|
case SAA7191_CONTROL_FORCE_COLOUR:
|
|
case SAA7191_CONTROL_CHROMA_GAIN:
|
|
reg = saa7191_read_reg(sd, SAA7191_REG_GAIN);
|
|
if (ctrl->id == SAA7191_CONTROL_FORCE_COLOUR) {
|
|
if (ctrl->value)
|
|
reg |= SAA7191_GAIN_COLO;
|
|
else
|
|
reg &= ~SAA7191_GAIN_COLO;
|
|
} else {
|
|
reg &= ~SAA7191_GAIN_LFIS_MASK;
|
|
reg |= (ctrl->value << SAA7191_GAIN_LFIS_SHIFT)
|
|
& SAA7191_GAIN_LFIS_MASK;
|
|
}
|
|
ret = saa7191_write_reg(sd, SAA7191_REG_GAIN, reg);
|
|
break;
|
|
case V4L2_CID_HUE:
|
|
reg = ctrl->value & 0xff;
|
|
if (reg < 0x80)
|
|
reg += 0x80;
|
|
else
|
|
reg -= 0x80;
|
|
ret = saa7191_write_reg(sd, SAA7191_REG_HUEC, reg);
|
|
break;
|
|
case SAA7191_CONTROL_VTRC:
|
|
reg = saa7191_read_reg(sd, SAA7191_REG_STDC);
|
|
if (ctrl->value)
|
|
reg |= SAA7191_STDC_VTRC;
|
|
else
|
|
reg &= ~SAA7191_STDC_VTRC;
|
|
ret = saa7191_write_reg(sd, SAA7191_REG_STDC, reg);
|
|
break;
|
|
case SAA7191_CONTROL_LUMA_DELAY: {
|
|
s32 value = ctrl->value;
|
|
if (value < 0)
|
|
value += 8;
|
|
reg = saa7191_read_reg(sd, SAA7191_REG_CTL3);
|
|
reg &= ~SAA7191_CTL3_YDEL_MASK;
|
|
reg |= (value << SAA7191_CTL3_YDEL_SHIFT)
|
|
& SAA7191_CTL3_YDEL_MASK;
|
|
ret = saa7191_write_reg(sd, SAA7191_REG_CTL3, reg);
|
|
break;
|
|
}
|
|
case SAA7191_CONTROL_VNR:
|
|
reg = saa7191_read_reg(sd, SAA7191_REG_CTL4);
|
|
reg &= ~SAA7191_CTL4_VNOI_MASK;
|
|
reg |= (ctrl->value << SAA7191_CTL4_VNOI_SHIFT)
|
|
& SAA7191_CTL4_VNOI_MASK;
|
|
ret = saa7191_write_reg(sd, SAA7191_REG_CTL4, reg);
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* I2C-interface */
|
|
|
|
static int saa7191_g_input_status(struct v4l2_subdev *sd, u32 *status)
|
|
{
|
|
u8 status_reg;
|
|
int res = V4L2_IN_ST_NO_SIGNAL;
|
|
|
|
if (saa7191_read_status(sd, &status_reg))
|
|
return -EIO;
|
|
if ((status_reg & SAA7191_STATUS_HLCK) == 0)
|
|
res = 0;
|
|
if (!(status_reg & SAA7191_STATUS_CODE))
|
|
res |= V4L2_IN_ST_NO_COLOR;
|
|
*status = res;
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int saa7191_g_chip_ident(struct v4l2_subdev *sd,
|
|
struct v4l2_dbg_chip_ident *chip)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
|
|
return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_SAA7191, 0);
|
|
}
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
static const struct v4l2_subdev_core_ops saa7191_core_ops = {
|
|
.g_chip_ident = saa7191_g_chip_ident,
|
|
.g_ctrl = saa7191_g_ctrl,
|
|
.s_ctrl = saa7191_s_ctrl,
|
|
.s_std = saa7191_s_std,
|
|
};
|
|
|
|
static const struct v4l2_subdev_video_ops saa7191_video_ops = {
|
|
.s_routing = saa7191_s_routing,
|
|
.querystd = saa7191_querystd,
|
|
.g_input_status = saa7191_g_input_status,
|
|
};
|
|
|
|
static const struct v4l2_subdev_ops saa7191_ops = {
|
|
.core = &saa7191_core_ops,
|
|
.video = &saa7191_video_ops,
|
|
};
|
|
|
|
static int saa7191_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
int err = 0;
|
|
struct saa7191 *decoder;
|
|
struct v4l2_subdev *sd;
|
|
|
|
v4l_info(client, "chip found @ 0x%x (%s)\n",
|
|
client->addr << 1, client->adapter->name);
|
|
|
|
decoder = kzalloc(sizeof(*decoder), GFP_KERNEL);
|
|
if (!decoder)
|
|
return -ENOMEM;
|
|
|
|
sd = &decoder->sd;
|
|
v4l2_i2c_subdev_init(sd, client, &saa7191_ops);
|
|
|
|
err = saa7191_write_block(sd, sizeof(initseq), initseq);
|
|
if (err) {
|
|
printk(KERN_ERR "SAA7191 initialization failed\n");
|
|
kfree(decoder);
|
|
return err;
|
|
}
|
|
|
|
printk(KERN_INFO "SAA7191 initialized\n");
|
|
|
|
decoder->input = SAA7191_INPUT_COMPOSITE;
|
|
decoder->norm = V4L2_STD_PAL;
|
|
|
|
err = saa7191_autodetect_norm(sd);
|
|
if (err && (err != -EBUSY))
|
|
printk(KERN_ERR "SAA7191: Signal auto-detection failed\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int saa7191_remove(struct i2c_client *client)
|
|
{
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
|
|
v4l2_device_unregister_subdev(sd);
|
|
kfree(to_saa7191(sd));
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id saa7191_id[] = {
|
|
{ "saa7191", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, saa7191_id);
|
|
|
|
static struct v4l2_i2c_driver_data v4l2_i2c_data = {
|
|
.name = "saa7191",
|
|
.probe = saa7191_probe,
|
|
.remove = saa7191_remove,
|
|
.id_table = saa7191_id,
|
|
};
|