kevin/linux
1
Fork 0
Code
f3270f6ef7
linux/arch/powerpc/boot
History
Mark A. Greer c368d921da [POWERPC] Add bootwrapper support for Motorola PrPMC2800 platform 
The Motorola PrPMC280 and PrPMC2800 processor modules sit on an F101 or
PrPMC2800 baseboard, respectively.  There are several variants of each
type of processor module which can have different amounts of memory,
amounts of FLASH, cpu frequencies, and an mv64360 or an mv64362.

The bootwrapper code for that platform reads VPD from an I2C EEPROM
to determine the processor module variant.  From the variant, the
amount of memory, etc. is determined and the device tree is updated
accordingly.  If the variant cannot be determined (e.g., corrupted
VPD or a previously unknown variant), the property values already
in the device tree are used.

Also, the firmware for those platforms does not completely configure
the mv64x60 host bridge so that configuration is done here.

Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12 11:32:50 +10:00
..
dts [POWERPC] Add DTS file for the Motorola PrPMC2800 platform 2007-05-12 11:32:50 +10:00
.gitignore [POWERPC] bootwrapper: Add a cuboot platform and a cuImage target 2007-04-24 21:31:54 +10:00
44x.c [POWERPC] Support for the Ebony 440GP reference board in arch/powerpc 2007-05-08 14:47:32 +10:00
44x.h [POWERPC] Support for the Ebony 440GP reference board in arch/powerpc 2007-05-08 14:47:32 +10:00
addnote.c powerpc: Move ppc64 boot wrapper code over to arch/powerpc 2005-11-16 13:52:21 +11:00
addRamDisk.c powerpc: Move ppc64 boot wrapper code over to arch/powerpc 2005-11-16 13:52:21 +11:00
crt0.S [POWERPC] bootwrapper: missing relocation in crt0.S 2007-04-13 03:55:16 +10:00
cuboot-83xx.c [POWERPC] U-boot passes the initrd as start/end, not start/size. 2007-05-12 11:32:48 +10:00
cuboot-85xx.c [POWERPC] U-boot passes the initrd as start/end, not start/size. 2007-05-12 11:32:48 +10:00
cuboot-ebony.c [POWERPC] Support for the Ebony 440GP reference board in arch/powerpc 2007-05-08 14:47:32 +10:00
dcr.h [POWERPC] Support for the Ebony 440GP reference board in arch/powerpc 2007-05-08 14:47:32 +10:00
devtree.c [POWERPC] Add dt_xlate_addr() to bootwrapper 2007-04-30 11:02:05 +10:00
div64.S powerpc: Move ppc64 boot wrapper code over to arch/powerpc 2005-11-16 13:52:21 +11:00
dummy.c powerpc/32: Generate miboot images with ARCH=powerpc 2006-01-15 13:00:08 +11:00
ebony.c [POWERPC] Support for the Ebony 440GP reference board in arch/powerpc 2007-05-08 14:47:32 +10:00
elf_util.c [POWERPC] Move bootwrapper ELF parsing routines to a file 2007-04-13 03:55:16 +10:00
elf.h [POWERPC] Move bootwrapper ELF parsing routines to a file 2007-04-13 03:55:16 +10:00
flatdevtree_env.h [POWERPC] Add flatdevtree source 2006-10-23 12:49:18 +10:00
flatdevtree_misc.c [POWERPC] bootwrapper: Add dt_ops methods. 2007-03-21 22:35:21 +11:00
flatdevtree.c [POWERPC] bootwrapper: Make ft_create_node() pay attention to the parent parameter. 2007-03-16 15:49:15 +11:00
flatdevtree.h [POWERPC] bootwrapper: Make ft_create_node() pay attention to the parent parameter. 2007-03-16 15:49:15 +11:00
gunzip_util.c [POWERPC] boot: More verbose gunzip error message 2007-04-27 21:13:49 +10:00
gunzip_util.h [POWERPC] Add documentation for the zImage's gunzip convenience functions 2007-03-16 16:38:19 +11:00
hack-coff.c powerpc: Make COFF zImages for old 32-bit powermacs 2006-01-14 15:04:06 +11:00
holly.c [POWERPC] Holly bootwrapper 2007-05-08 11:54:21 +10:00
install.sh [PATCH] powerpc: trivial: modify comments to refer to new location of files 2006-02-10 16:53:51 +11:00
io.h [POWERPC] Add non-OF serial console support 2006-10-23 12:49:19 +10:00
main.c [POWERPC] bootwrapper: Decompress less, check more 2007-04-13 03:55:17 +10:00
Makefile [POWERPC] Add bootwrapper support for Motorola PrPMC2800 platform 2007-05-12 11:32:50 +10:00
mktree.c [POWERPC] Support for the Ebony 440GP reference board in arch/powerpc 2007-05-08 14:47:32 +10:00
mpsc.c [POWERPC] Add bootwrapper support for Marvell MPSC 2007-05-12 11:32:49 +10:00
mv64x60_i2c.c [POWERPC] Add bootwrapper support for Marvell/mv64x60 I2C 2007-05-12 11:32:49 +10:00
mv64x60.c [POWERPC] Add bootwrapper support for Marvell/mv64x60 hostbridge 2007-05-12 11:32:49 +10:00
mv64x60.h [POWERPC] Add bootwrapper support for Marvell/mv64x60 hostbridge 2007-05-12 11:32:49 +10:00
ns16550.c [POWERPC] bootwrapper: Add dt_xlate_reg(), and use it to find serial registers. 2007-04-13 03:55:15 +10:00
of.c [POWERPC] bootwrapper: Use `unsigned long' for malloc sizes 2007-04-24 22:06:54 +10:00
ops.h [POWERPC] Add bootwrapper support for Marvell MPSC 2007-05-12 11:32:49 +10:00
page.h powerpc: Move ppc64 boot wrapper code over to arch/powerpc 2005-11-16 13:52:21 +11:00
ppc_asm.h powerpc: Move ppc64 boot wrapper code over to arch/powerpc 2005-11-16 13:52:21 +11:00
ppcboot.h [POWERPC] bootwrapper: Add ppcboot.h 2007-04-24 21:31:55 +10:00
prpmc2800.c [POWERPC] Add bootwrapper support for Motorola PrPMC2800 platform 2007-05-12 11:32:50 +10:00
README powerpc: Move ppc64 boot wrapper code over to arch/powerpc 2005-11-16 13:52:21 +11:00
reg.h [POWERPC] New reg.h for the zImage 2007-03-26 15:11:20 +10:00
rs6000.h powerpc: Make COFF zImages for old 32-bit powermacs 2006-01-14 15:04:06 +11:00
serial.c [POWERPC] Add bootwrapper support for Marvell MPSC 2007-05-12 11:32:49 +10:00
simple_alloc.c [POWERPC] bootwrapper: Use `unsigned long' for malloc sizes 2007-04-24 22:06:54 +10:00
stdio.c [POWERPC] More bootwrapper reorganization 2006-10-18 15:50:18 +10:00
stdio.h [POWERPC] Add gcc format warnings to zImage printf() 2007-03-26 15:11:20 +10:00
string.h powerpc: Move ppc64 boot wrapper code over to arch/powerpc 2005-11-16 13:52:21 +11:00
string.S powerpc: Avoid unaligned loads and stores in boot memcpy code 2006-01-14 15:06:51 +11:00
treeboot-ebony.c [POWERPC] Support for the Ebony 440GP reference board in arch/powerpc 2007-05-08 14:47:32 +10:00
types.h [POWERPC] Start arch/powerpc/boot code reorganization 2006-09-20 15:09:58 +10:00
util.S [POWERPC] Add non-OF serial console support 2006-10-23 12:49:19 +10:00
wrapper [POWERPC] Support for the Ebony 440GP reference board in arch/powerpc 2007-05-08 14:47:32 +10:00
zImage.coff.lds.S [POWERPC] zImage: Cleanup and improve zImage entry point 2007-03-13 13:35:03 +11:00
zImage.lds.S [POWERPC] zImage: Cleanup and improve zImage entry point 2007-03-13 13:35:03 +11:00

README 

To extract the kernel vmlinux, System.map, .config or initrd from the zImage binary:

objcopy -j .kernel:vmlinux -O binary zImage vmlinux.gz
objcopy -j .kernel:System.map -O binary zImage System.map.gz
objcopy -j .kernel:.config -O binary zImage config.gz
objcopy -j .kernel:initrd -O binary zImage.initrd initrd.gz


	Peter