kevin/linux
1
Fork 0
Code
f172468a14
linux/arch/ia64/kernel/head.S
Tim Abbott f172468a14 [IA64] Use .ref.text, not .text.init for start_ap. 
It seems that start_ap doesn't need to be in a special location in the
kernel, but it references some init code so it should be in .ref.text.

Since this is the only thing in the .text.head section, eliminate
.text.head from the linker script.

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2009-09-15 09:29:31 -07:00

1319 lines
32 KiB
ArmAsm
Raw Blame History

/*
* Here is where the ball gets rolling as far as the kernel is concerned.
* When control is transferred to _start, the bootload has already
* loaded us to the correct address. All that's left to do here is
* to set up the kernel's global pointer and jump to the kernel
* entry point.
*
* Copyright (C) 1998-2001, 2003, 2005 Hewlett-Packard Co
* David Mosberger-Tang <davidm@hpl.hp.com>
* Stephane Eranian <eranian@hpl.hp.com>
* Copyright (C) 1999 VA Linux Systems
* Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
* Copyright (C) 1999 Intel Corp.
* Copyright (C) 1999 Asit Mallick <Asit.K.Mallick@intel.com>
* Copyright (C) 1999 Don Dugger <Don.Dugger@intel.com>
* Copyright (C) 2002 Fenghua Yu <fenghua.yu@intel.com>
* -Optimize __ia64_save_fpu() and __ia64_load_fpu() for Itanium 2.
* Copyright (C) 2004 Ashok Raj <ashok.raj@intel.com>
* Support for CPU Hotplug
*/
#include <asm/asmmacro.h>
#include <asm/fpu.h>
#include <asm/kregs.h>
#include <asm/mmu_context.h>
#include <asm/asm-offsets.h>
#include <asm/pal.h>
#include <asm/paravirt.h>
#include <asm/pgtable.h>
#include <asm/processor.h>
#include <asm/ptrace.h>
#include <asm/system.h>
#include <asm/mca_asm.h>
#include <linux/init.h>
#include <linux/linkage.h>
#ifdef CONFIG_HOTPLUG_CPU
#define SAL_PSR_BITS_TO_SET \
(IA64_PSR_AC | IA64_PSR_BN | IA64_PSR_MFH | IA64_PSR_MFL)
#define SAVE_FROM_REG(src, ptr, dest) \
mov dest=src;; \
st8 [ptr]=dest,0x08
#define RESTORE_REG(reg, ptr, _tmp) \
ld8 _tmp=[ptr],0x08;; \
mov reg=_tmp
#define SAVE_BREAK_REGS(ptr, _idx, _breg, _dest)\
mov ar.lc=IA64_NUM_DBG_REGS-1;; \
mov _idx=0;; \
1: \
SAVE_FROM_REG(_breg[_idx], ptr, _dest);; \
add _idx=1,_idx;; \
br.cloop.sptk.many 1b
#define RESTORE_BREAK_REGS(ptr, _idx, _breg, _tmp, _lbl)\
mov ar.lc=IA64_NUM_DBG_REGS-1;; \
mov _idx=0;; \
_lbl: RESTORE_REG(_breg[_idx], ptr, _tmp);; \
add _idx=1, _idx;; \
br.cloop.sptk.many _lbl
#define SAVE_ONE_RR(num, _reg, _tmp) \
movl _tmp=(num<<61);; \
mov _reg=rr[_tmp]
#define SAVE_REGION_REGS(_tmp, _r0, _r1, _r2, _r3, _r4, _r5, _r6, _r7) \
SAVE_ONE_RR(0,_r0, _tmp);; \
SAVE_ONE_RR(1,_r1, _tmp);; \
SAVE_ONE_RR(2,_r2, _tmp);; \
SAVE_ONE_RR(3,_r3, _tmp);; \
SAVE_ONE_RR(4,_r4, _tmp);; \
SAVE_ONE_RR(5,_r5, _tmp);; \
SAVE_ONE_RR(6,_r6, _tmp);; \
SAVE_ONE_RR(7,_r7, _tmp);;
#define STORE_REGION_REGS(ptr, _r0, _r1, _r2, _r3, _r4, _r5, _r6, _r7) \
st8 [ptr]=_r0, 8;; \
st8 [ptr]=_r1, 8;; \
st8 [ptr]=_r2, 8;; \
st8 [ptr]=_r3, 8;; \
st8 [ptr]=_r4, 8;; \
st8 [ptr]=_r5, 8;; \
st8 [ptr]=_r6, 8;; \
st8 [ptr]=_r7, 8;;
#define RESTORE_REGION_REGS(ptr, _idx1, _idx2, _tmp) \
mov ar.lc=0x08-1;; \
movl _idx1=0x00;; \
RestRR: \
dep.z _idx2=_idx1,61,3;; \
ld8 _tmp=[ptr],8;; \
mov rr[_idx2]=_tmp;; \
srlz.d;; \
add _idx1=1,_idx1;; \
br.cloop.sptk.few RestRR
#define SET_AREA_FOR_BOOTING_CPU(reg1, reg2) \
movl reg1=sal_state_for_booting_cpu;; \
ld8 reg2=[reg1];;
/*
* Adjust region registers saved before starting to save
* break regs and rest of the states that need to be preserved.
*/
#define SAL_TO_OS_BOOT_HANDOFF_STATE_SAVE(_reg1,_reg2,_pred) \
SAVE_FROM_REG(b0,_reg1,_reg2);; \
SAVE_FROM_REG(b1,_reg1,_reg2);; \
SAVE_FROM_REG(b2,_reg1,_reg2);; \
SAVE_FROM_REG(b3,_reg1,_reg2);; \
SAVE_FROM_REG(b4,_reg1,_reg2);; \
SAVE_FROM_REG(b5,_reg1,_reg2);; \
st8 [_reg1]=r1,0x08;; \
st8 [_reg1]=r12,0x08;; \
st8 [_reg1]=r13,0x08;; \
SAVE_FROM_REG(ar.fpsr,_reg1,_reg2);; \
SAVE_FROM_REG(ar.pfs,_reg1,_reg2);; \
SAVE_FROM_REG(ar.rnat,_reg1,_reg2);; \
SAVE_FROM_REG(ar.unat,_reg1,_reg2);; \
SAVE_FROM_REG(ar.bspstore,_reg1,_reg2);; \
SAVE_FROM_REG(cr.dcr,_reg1,_reg2);; \
SAVE_FROM_REG(cr.iva,_reg1,_reg2);; \
SAVE_FROM_REG(cr.pta,_reg1,_reg2);; \
SAVE_FROM_REG(cr.itv,_reg1,_reg2);; \
SAVE_FROM_REG(cr.pmv,_reg1,_reg2);; \
SAVE_FROM_REG(cr.cmcv,_reg1,_reg2);; \
SAVE_FROM_REG(cr.lrr0,_reg1,_reg2);; \
SAVE_FROM_REG(cr.lrr1,_reg1,_reg2);; \
st8 [_reg1]=r4,0x08;; \
st8 [_reg1]=r5,0x08;; \
st8 [_reg1]=r6,0x08;; \
st8 [_reg1]=r7,0x08;; \
st8 [_reg1]=_pred,0x08;; \
SAVE_FROM_REG(ar.lc, _reg1, _reg2);; \
stf.spill.nta [_reg1]=f2,16;; \
stf.spill.nta [_reg1]=f3,16;; \
stf.spill.nta [_reg1]=f4,16;; \
stf.spill.nta [_reg1]=f5,16;; \
stf.spill.nta [_reg1]=f16,16;; \
stf.spill.nta [_reg1]=f17,16;; \
stf.spill.nta [_reg1]=f18,16;; \
stf.spill.nta [_reg1]=f19,16;; \
stf.spill.nta [_reg1]=f20,16;; \
stf.spill.nta [_reg1]=f21,16;; \
stf.spill.nta [_reg1]=f22,16;; \
stf.spill.nta [_reg1]=f23,16;; \
stf.spill.nta [_reg1]=f24,16;; \
stf.spill.nta [_reg1]=f25,16;; \
stf.spill.nta [_reg1]=f26,16;; \
stf.spill.nta [_reg1]=f27,16;; \
stf.spill.nta [_reg1]=f28,16;; \
stf.spill.nta [_reg1]=f29,16;; \
stf.spill.nta [_reg1]=f30,16;; \
stf.spill.nta [_reg1]=f31,16;;
#else
#define SET_AREA_FOR_BOOTING_CPU(a1, a2)
#define SAL_TO_OS_BOOT_HANDOFF_STATE_SAVE(a1,a2, a3)
#define SAVE_REGION_REGS(_tmp, _r0, _r1, _r2, _r3, _r4, _r5, _r6, _r7)
#define STORE_REGION_REGS(ptr, _r0, _r1, _r2, _r3, _r4, _r5, _r6, _r7)
#endif
#define SET_ONE_RR(num, pgsize, _tmp1, _tmp2, vhpt) \
movl _tmp1=(num << 61);; \
mov _tmp2=((ia64_rid(IA64_REGION_ID_KERNEL, (num<<61)) << 8) | (pgsize << 2) | vhpt);; \
mov rr[_tmp1]=_tmp2
.section __special_page_section,"ax"
.global empty_zero_page
empty_zero_page:
.skip PAGE_SIZE
.global swapper_pg_dir
swapper_pg_dir:
.skip PAGE_SIZE
.rodata
halt_msg:
stringz "Halting kernel\n"
__REF
.global start_ap
/*
* Start the kernel. When the bootloader passes control to _start(), r28
* points to the address of the boot parameter area. Execution reaches
* here in physical mode.
*/
GLOBAL_ENTRY(_start)
start_ap:
.prologue
.save rp, r0 // terminate unwind chain with a NULL rp
.body
rsm psr.i | psr.ic
;;
srlz.i
;;
{
flushrs // must be first insn in group
srlz.i
}
;;
/*
* Save the region registers, predicate before they get clobbered
*/
SAVE_REGION_REGS(r2, r8,r9,r10,r11,r12,r13,r14,r15);
mov r25=pr;;
/*
* Initialize kernel region registers:
* rr[0]: VHPT enabled, page size = PAGE_SHIFT
* rr[1]: VHPT enabled, page size = PAGE_SHIFT
* rr[2]: VHPT enabled, page size = PAGE_SHIFT
* rr[3]: VHPT enabled, page size = PAGE_SHIFT
* rr[4]: VHPT enabled, page size = PAGE_SHIFT
* rr[5]: VHPT enabled, page size = PAGE_SHIFT
* rr[6]: VHPT disabled, page size = IA64_GRANULE_SHIFT
* rr[7]: VHPT disabled, page size = IA64_GRANULE_SHIFT
* We initialize all of them to prevent inadvertently assuming
* something about the state of address translation early in boot.
*/
SET_ONE_RR(0, PAGE_SHIFT, r2, r16, 1);;
SET_ONE_RR(1, PAGE_SHIFT, r2, r16, 1);;
SET_ONE_RR(2, PAGE_SHIFT, r2, r16, 1);;
SET_ONE_RR(3, PAGE_SHIFT, r2, r16, 1);;
SET_ONE_RR(4, PAGE_SHIFT, r2, r16, 1);;
SET_ONE_RR(5, PAGE_SHIFT, r2, r16, 1);;
SET_ONE_RR(6, IA64_GRANULE_SHIFT, r2, r16, 0);;
SET_ONE_RR(7, IA64_GRANULE_SHIFT, r2, r16, 0);;
/*
* Now pin mappings into the TLB for kernel text and data
*/
mov r18=KERNEL_TR_PAGE_SHIFT<<2
movl r17=KERNEL_START
;;
mov cr.itir=r18
mov cr.ifa=r17
mov r16=IA64_TR_KERNEL
mov r3=ip
movl r18=PAGE_KERNEL
;;
dep r2=0,r3,0,KERNEL_TR_PAGE_SHIFT
;;
or r18=r2,r18
;;
srlz.i
;;
itr.i itr[r16]=r18
;;
itr.d dtr[r16]=r18
;;
srlz.i
/*
* Switch into virtual mode:
*/
movl r16=(IA64_PSR_IT|IA64_PSR_IC|IA64_PSR_DT|IA64_PSR_RT|IA64_PSR_DFH|IA64_PSR_BN \
|IA64_PSR_DI|IA64_PSR_AC)
;;
mov cr.ipsr=r16
movl r17=1f
;;
mov cr.iip=r17
mov cr.ifs=r0
;;
rfi
;;
1: // now we are in virtual mode
SET_AREA_FOR_BOOTING_CPU(r2, r16);
STORE_REGION_REGS(r16, r8,r9,r10,r11,r12,r13,r14,r15);
SAL_TO_OS_BOOT_HANDOFF_STATE_SAVE(r16,r17,r25)
;;
// set IVT entry point---can't access I/O ports without it
movl r3=ia64_ivt
;;
mov cr.iva=r3
movl r2=FPSR_DEFAULT
;;
srlz.i
movl gp=__gp
mov ar.fpsr=r2
;;
#define isAP p2 // are we an Application Processor?
#define isBP p3 // are we the Bootstrap Processor?
#ifdef CONFIG_SMP
/*
* Find the init_task for the currently booting CPU. At poweron, and in
* UP mode, task_for_booting_cpu is NULL.
*/
movl r3=task_for_booting_cpu
;;
ld8 r3=[r3]
movl r2=init_task
;;
cmp.eq isBP,isAP=r3,r0
;;
(isAP) mov r2=r3
#else
movl r2=init_task
cmp.eq isBP,isAP=r0,r0
#endif
;;
tpa r3=r2 // r3 == phys addr of task struct
mov r16=-1
(isBP) br.cond.dpnt .load_current // BP stack is on region 5 --- no need to map it
// load mapping for stack (virtaddr in r2, physaddr in r3)
rsm psr.ic
movl r17=PAGE_KERNEL
;;
srlz.d
dep r18=0,r3,0,12
;;
or r18=r17,r18
dep r2=-1,r3,61,3 // IMVA of task
;;
mov r17=rr[r2]
shr.u r16=r3,IA64_GRANULE_SHIFT
;;
dep r17=0,r17,8,24
;;
mov cr.itir=r17
mov cr.ifa=r2
mov r19=IA64_TR_CURRENT_STACK
;;
itr.d dtr[r19]=r18
;;
ssm psr.ic
srlz.d
;;
.load_current:
// load the "current" pointer (r13) and ar.k6 with the current task
mov IA64_KR(CURRENT)=r2 // virtual address
mov IA64_KR(CURRENT_STACK)=r16
mov r13=r2
/*
* Reserve space at the top of the stack for "struct pt_regs". Kernel
* threads don't store interesting values in that structure, but the space
* still needs to be there because time-critical stuff such as the context
* switching can be implemented more efficiently (for example, __switch_to()
* always sets the psr.dfh bit of the task it is switching to).
*/
addl r12=IA64_STK_OFFSET-IA64_PT_REGS_SIZE-16,r2
addl r2=IA64_RBS_OFFSET,r2 // initialize the RSE
mov ar.rsc=0 // place RSE in enforced lazy mode
;;
loadrs // clear the dirty partition
movl r19=__phys_per_cpu_start
mov r18=PERCPU_PAGE_SIZE
;;
#ifndef CONFIG_SMP
add r19=r19,r18
;;
#else
(isAP) br.few 2f
movl r20=__cpu0_per_cpu
;;
shr.u r18=r18,3
1:
ld8 r21=[r19],8;;
st8[r20]=r21,8
adds r18=-1,r18;;
cmp4.lt p7,p6=0,r18
(p7) br.cond.dptk.few 1b
mov r19=r20
;;
2:
#endif
tpa r19=r19
;;
.pred.rel.mutex isBP,isAP
(isBP) mov IA64_KR(PER_CPU_DATA)=r19 // per-CPU base for cpu0
(isAP) mov IA64_KR(PER_CPU_DATA)=r0 // clear physical per-CPU base
;;
mov ar.bspstore=r2 // establish the new RSE stack
;;
mov ar.rsc=0x3 // place RSE in eager mode
(isBP) dep r28=-1,r28,61,3 // make address virtual
(isBP) movl r2=ia64_boot_param
;;
(isBP) st8 [r2]=r28 // save the address of the boot param area passed by the bootloader
#ifdef CONFIG_PARAVIRT
movl r14=hypervisor_setup_hooks
movl r15=hypervisor_type
mov r16=num_hypervisor_hooks
;;
ld8 r2=[r15]
;;
cmp.ltu p7,p0=r2,r16 // array size check
shladd r8=r2,3,r14
;;
(p7) ld8 r9=[r8]
;;
(p7) mov b1=r9
(p7) cmp.ne.unc p7,p0=r9,r0 // no actual branch to NULL
;;
(p7) br.call.sptk.many rp=b1
__INITDATA
default_setup_hook = 0 // Currently nothing needs to be done.
.weak xen_setup_hook
.global hypervisor_type
hypervisor_type:
data8 PARAVIRT_HYPERVISOR_TYPE_DEFAULT
// must have the same order with PARAVIRT_HYPERVISOR_TYPE_xxx
hypervisor_setup_hooks:
data8 default_setup_hook
data8 xen_setup_hook
num_hypervisor_hooks = (. - hypervisor_setup_hooks) / 8
.previous
#endif
#ifdef CONFIG_SMP
(isAP) br.call.sptk.many rp=start_secondary
.ret0:
(isAP) br.cond.sptk self
#endif
// This is executed by the bootstrap processor (bsp) only:
#ifdef CONFIG_IA64_FW_EMU
// initialize PAL & SAL emulator:
br.call.sptk.many rp=sys_fw_init
.ret1:
#endif
br.call.sptk.many rp=start_kernel
.ret2: addl r3=@ltoff(halt_msg),gp
;;
alloc r2=ar.pfs,8,0,2,0
;;
ld8 out0=[r3]
br.call.sptk.many b0=console_print
self: hint @pause
br.sptk.many self // endless loop
END(_start)
.text
GLOBAL_ENTRY(ia64_save_debug_regs)
alloc r16=ar.pfs,1,0,0,0
mov r20=ar.lc // preserve ar.lc
mov ar.lc=IA64_NUM_DBG_REGS-1
mov r18=0
add r19=IA64_NUM_DBG_REGS*8,in0
;;
1: mov r16=dbr[r18]
#ifdef CONFIG_ITANIUM
;;
srlz.d
#endif
mov r17=ibr[r18]
add r18=1,r18
;;
st8.nta [in0]=r16,8
st8.nta [r19]=r17,8
br.cloop.sptk.many 1b
;;
mov ar.lc=r20 // restore ar.lc
br.ret.sptk.many rp
END(ia64_save_debug_regs)
GLOBAL_ENTRY(ia64_load_debug_regs)
alloc r16=ar.pfs,1,0,0,0
lfetch.nta [in0]
mov r20=ar.lc // preserve ar.lc
add r19=IA64_NUM_DBG_REGS*8,in0
mov ar.lc=IA64_NUM_DBG_REGS-1
mov r18=-1
;;
1: ld8.nta r16=[in0],8
ld8.nta r17=[r19],8
add r18=1,r18
;;
mov dbr[r18]=r16
#ifdef CONFIG_ITANIUM
;;
srlz.d // Errata 132 (NoFix status)
#endif
mov ibr[r18]=r17
br.cloop.sptk.many 1b
;;
mov ar.lc=r20 // restore ar.lc
br.ret.sptk.many rp
END(ia64_load_debug_regs)
GLOBAL_ENTRY(__ia64_save_fpu)
alloc r2=ar.pfs,1,4,0,0
adds loc0=96*16-16,in0
adds loc1=96*16-16-128,in0
;;
stf.spill.nta [loc0]=f127,-256
stf.spill.nta [loc1]=f119,-256
;;
stf.spill.nta [loc0]=f111,-256
stf.spill.nta [loc1]=f103,-256
;;
stf.spill.nta [loc0]=f95,-256
stf.spill.nta [loc1]=f87,-256
;;
stf.spill.nta [loc0]=f79,-256
stf.spill.nta [loc1]=f71,-256
;;
stf.spill.nta [loc0]=f63,-256
stf.spill.nta [loc1]=f55,-256
adds loc2=96*16-32,in0
;;
stf.spill.nta [loc0]=f47,-256
stf.spill.nta [loc1]=f39,-256
adds loc3=96*16-32-128,in0
;;
stf.spill.nta [loc2]=f126,-256
stf.spill.nta [loc3]=f118,-256
;;
stf.spill.nta [loc2]=f110,-256
stf.spill.nta [loc3]=f102,-256
;;
stf.spill.nta [loc2]=f94,-256
stf.spill.nta [loc3]=f86,-256
;;
stf.spill.nta [loc2]=f78,-256
stf.spill.nta [loc3]=f70,-256
;;
stf.spill.nta [loc2]=f62,-256
stf.spill.nta [loc3]=f54,-256
adds loc0=96*16-48,in0
;;
stf.spill.nta [loc2]=f46,-256
stf.spill.nta [loc3]=f38,-256
adds loc1=96*16-48-128,in0
;;
stf.spill.nta [loc0]=f125,-256
stf.spill.nta [loc1]=f117,-256
;;
stf.spill.nta [loc0]=f109,-256
stf.spill.nta [loc1]=f101,-256
;;
stf.spill.nta [loc0]=f93,-256
stf.spill.nta [loc1]=f85,-256
;;
stf.spill.nta [loc0]=f77,-256
stf.spill.nta [loc1]=f69,-256
;;
stf.spill.nta [loc0]=f61,-256
stf.spill.nta [loc1]=f53,-256
adds loc2=96*16-64,in0
;;
stf.spill.nta [loc0]=f45,-256
stf.spill.nta [loc1]=f37,-256
adds loc3=96*16-64-128,in0
;;
stf.spill.nta [loc2]=f124,-256
stf.spill.nta [loc3]=f116,-256
;;
stf.spill.nta [loc2]=f108,-256
stf.spill.nta [loc3]=f100,-256
;;
stf.spill.nta [loc2]=f92,-256
stf.spill.nta [loc3]=f84,-256
;;
stf.spill.nta [loc2]=f76,-256
stf.spill.nta [loc3]=f68,-256
;;
stf.spill.nta [loc2]=f60,-256
stf.spill.nta [loc3]=f52,-256
adds loc0=96*16-80,in0
;;
stf.spill.nta [loc2]=f44,-256
stf.spill.nta [loc3]=f36,-256
adds loc1=96*16-80-128,in0
;;
stf.spill.nta [loc0]=f123,-256
stf.spill.nta [loc1]=f115,-256
;;
stf.spill.nta [loc0]=f107,-256
stf.spill.nta [loc1]=f99,-256
;;
stf.spill.nta [loc0]=f91,-256
stf.spill.nta [loc1]=f83,-256
;;
stf.spill.nta [loc0]=f75,-256
stf.spill.nta [loc1]=f67,-256
;;
stf.spill.nta [loc0]=f59,-256
stf.spill.nta [loc1]=f51,-256
adds loc2=96*16-96,in0
;;
stf.spill.nta [loc0]=f43,-256
stf.spill.nta [loc1]=f35,-256
adds loc3=96*16-96-128,in0
;;
stf.spill.nta [loc2]=f122,-256
stf.spill.nta [loc3]=f114,-256
;;
stf.spill.nta [loc2]=f106,-256
stf.spill.nta [loc3]=f98,-256
;;
stf.spill.nta [loc2]=f90,-256
stf.spill.nta [loc3]=f82,-256
;;
stf.spill.nta [loc2]=f74,-256
stf.spill.nta [loc3]=f66,-256
;;
stf.spill.nta [loc2]=f58,-256
stf.spill.nta [loc3]=f50,-256
adds loc0=96*16-112,in0
;;
stf.spill.nta [loc2]=f42,-256
stf.spill.nta [loc3]=f34,-256
adds loc1=96*16-112-128,in0
;;
stf.spill.nta [loc0]=f121,-256
stf.spill.nta [loc1]=f113,-256
;;
stf.spill.nta [loc0]=f105,-256
stf.spill.nta [loc1]=f97,-256
;;
stf.spill.nta [loc0]=f89,-256
stf.spill.nta [loc1]=f81,-256
;;
stf.spill.nta [loc0]=f73,-256
stf.spill.nta [loc1]=f65,-256
;;
stf.spill.nta [loc0]=f57,-256
stf.spill.nta [loc1]=f49,-256
adds loc2=96*16-128,in0
;;
stf.spill.nta [loc0]=f41,-256
stf.spill.nta [loc1]=f33,-256
adds loc3=96*16-128-128,in0
;;
stf.spill.nta [loc2]=f120,-256
stf.spill.nta [loc3]=f112,-256
;;
stf.spill.nta [loc2]=f104,-256
stf.spill.nta [loc3]=f96,-256
;;
stf.spill.nta [loc2]=f88,-256
stf.spill.nta [loc3]=f80,-256
;;
stf.spill.nta [loc2]=f72,-256
stf.spill.nta [loc3]=f64,-256
;;
stf.spill.nta [loc2]=f56,-256
stf.spill.nta [loc3]=f48,-256
;;
stf.spill.nta [loc2]=f40
stf.spill.nta [loc3]=f32
br.ret.sptk.many rp
END(__ia64_save_fpu)
GLOBAL_ENTRY(__ia64_load_fpu)
alloc r2=ar.pfs,1,2,0,0
adds r3=128,in0
adds r14=256,in0
adds r15=384,in0
mov loc0=512
mov loc1=-1024+16
;;
ldf.fill.nta f32=[in0],loc0
ldf.fill.nta f40=[ r3],loc0
ldf.fill.nta f48=[r14],loc0
ldf.fill.nta f56=[r15],loc0
;;
ldf.fill.nta f64=[in0],loc0
ldf.fill.nta f72=[ r3],loc0
ldf.fill.nta f80=[r14],loc0
ldf.fill.nta f88=[r15],loc0
;;
ldf.fill.nta f96=[in0],loc1
ldf.fill.nta f104=[ r3],loc1
ldf.fill.nta f112=[r14],loc1
ldf.fill.nta f120=[r15],loc1
;;
ldf.fill.nta f33=[in0],loc0
ldf.fill.nta f41=[ r3],loc0
ldf.fill.nta f49=[r14],loc0
ldf.fill.nta f57=[r15],loc0
;;
ldf.fill.nta f65=[in0],loc0
ldf.fill.nta f73=[ r3],loc0
ldf.fill.nta f81=[r14],loc0
ldf.fill.nta f89=[r15],loc0
;;
ldf.fill.nta f97=[in0],loc1
ldf.fill.nta f105=[ r3],loc1
ldf.fill.nta f113=[r14],loc1
ldf.fill.nta f121=[r15],loc1
;;
ldf.fill.nta f34=[in0],loc0
ldf.fill.nta f42=[ r3],loc0
ldf.fill.nta f50=[r14],loc0
ldf.fill.nta f58=[r15],loc0
;;
ldf.fill.nta f66=[in0],loc0
ldf.fill.nta f74=[ r3],loc0
ldf.fill.nta f82=[r14],loc0
ldf.fill.nta f90=[r15],loc0
;;
ldf.fill.nta f98=[in0],loc1
ldf.fill.nta f106=[ r3],loc1
ldf.fill.nta f114=[r14],loc1
ldf.fill.nta f122=[r15],loc1
;;
ldf.fill.nta f35=[in0],loc0
ldf.fill.nta f43=[ r3],loc0
ldf.fill.nta f51=[r14],loc0
ldf.fill.nta f59=[r15],loc0
;;
ldf.fill.nta f67=[in0],loc0
ldf.fill.nta f75=[ r3],loc0
ldf.fill.nta f83=[r14],loc0
ldf.fill.nta f91=[r15],loc0
;;
ldf.fill.nta f99=[in0],loc1
ldf.fill.nta f107=[ r3],loc1
ldf.fill.nta f115=[r14],loc1
ldf.fill.nta f123=[r15],loc1
;;
ldf.fill.nta f36=[in0],loc0
ldf.fill.nta f44=[ r3],loc0
ldf.fill.nta f52=[r14],loc0
ldf.fill.nta f60=[r15],loc0
;;
ldf.fill.nta f68=[in0],loc0
ldf.fill.nta f76=[ r3],loc0
ldf.fill.nta f84=[r14],loc0
ldf.fill.nta f92=[r15],loc0
;;
ldf.fill.nta f100=[in0],loc1
ldf.fill.nta f108=[ r3],loc1
ldf.fill.nta f116=[r14],loc1
ldf.fill.nta f124=[r15],loc1
;;
ldf.fill.nta f37=[in0],loc0
ldf.fill.nta f45=[ r3],loc0
ldf.fill.nta f53=[r14],loc0
ldf.fill.nta f61=[r15],loc0
;;
ldf.fill.nta f69=[in0],loc0
ldf.fill.nta f77=[ r3],loc0
ldf.fill.nta f85=[r14],loc0
ldf.fill.nta f93=[r15],loc0
;;
ldf.fill.nta f101=[in0],loc1
ldf.fill.nta f109=[ r3],loc1
ldf.fill.nta f117=[r14],loc1
ldf.fill.nta f125=[r15],loc1
;;
ldf.fill.nta f38 =[in0],loc0
ldf.fill.nta f46 =[ r3],loc0
ldf.fill.nta f54 =[r14],loc0
ldf.fill.nta f62 =[r15],loc0
;;
ldf.fill.nta f70 =[in0],loc0
ldf.fill.nta f78 =[ r3],loc0
ldf.fill.nta f86 =[r14],loc0
ldf.fill.nta f94 =[r15],loc0
;;
ldf.fill.nta f102=[in0],loc1
ldf.fill.nta f110=[ r3],loc1
ldf.fill.nta f118=[r14],loc1
ldf.fill.nta f126=[r15],loc1
;;
ldf.fill.nta f39 =[in0],loc0
ldf.fill.nta f47 =[ r3],loc0
ldf.fill.nta f55 =[r14],loc0
ldf.fill.nta f63 =[r15],loc0
;;
ldf.fill.nta f71 =[in0],loc0
ldf.fill.nta f79 =[ r3],loc0
ldf.fill.nta f87 =[r14],loc0
ldf.fill.nta f95 =[r15],loc0
;;
ldf.fill.nta f103=[in0]
ldf.fill.nta f111=[ r3]
ldf.fill.nta f119=[r14]
ldf.fill.nta f127=[r15]
br.ret.sptk.many rp
END(__ia64_load_fpu)
GLOBAL_ENTRY(__ia64_init_fpu)
stf.spill [sp]=f0 // M3
mov f32=f0 // F
nop.b 0
ldfps f33,f34=[sp] // M0
ldfps f35,f36=[sp] // M1
mov f37=f0 // F
;;
setf.s f38=r0 // M2
setf.s f39=r0 // M3
mov f40=f0 // F
ldfps f41,f42=[sp] // M0
ldfps f43,f44=[sp] // M1
mov f45=f0 // F
setf.s f46=r0 // M2
setf.s f47=r0 // M3
mov f48=f0 // F
ldfps f49,f50=[sp] // M0
ldfps f51,f52=[sp] // M1
mov f53=f0 // F
setf.s f54=r0 // M2
setf.s f55=r0 // M3
mov f56=f0 // F
ldfps f57,f58=[sp] // M0
ldfps f59,f60=[sp] // M1
mov f61=f0 // F
setf.s f62=r0 // M2
setf.s f63=r0 // M3
mov f64=f0 // F
ldfps f65,f66=[sp] // M0
ldfps f67,f68=[sp] // M1
mov f69=f0 // F
setf.s f70=r0 // M2
setf.s f71=r0 // M3
mov f72=f0 // F
ldfps f73,f74=[sp] // M0
ldfps f75,f76=[sp] // M1
mov f77=f0 // F
setf.s f78=r0 // M2
setf.s f79=r0 // M3
mov f80=f0 // F
ldfps f81,f82=[sp] // M0
ldfps f83,f84=[sp] // M1
mov f85=f0 // F
setf.s f86=r0 // M2
setf.s f87=r0 // M3
mov f88=f0 // F
/*
* When the instructions are cached, it would be faster to initialize
* the remaining registers with simply mov instructions (F-unit).
* This gets the time down to ~29 cycles. However, this would use up
* 33 bundles, whereas continuing with the above pattern yields
* 10 bundles and ~30 cycles.
*/
ldfps f89,f90=[sp] // M0
ldfps f91,f92=[sp] // M1
mov f93=f0 // F
setf.s f94=r0 // M2
setf.s f95=r0 // M3
mov f96=f0 // F
ldfps f97,f98=[sp] // M0
ldfps f99,f100=[sp] // M1
mov f101=f0 // F
setf.s f102=r0 // M2
setf.s f103=r0 // M3
mov f104=f0 // F
ldfps f105,f106=[sp] // M0
ldfps f107,f108=[sp] // M1
mov f109=f0 // F
setf.s f110=r0 // M2
setf.s f111=r0 // M3
mov f112=f0 // F
ldfps f113,f114=[sp] // M0
ldfps f115,f116=[sp] // M1
mov f117=f0 // F
setf.s f118=r0 // M2
setf.s f119=r0 // M3
mov f120=f0 // F
ldfps f121,f122=[sp] // M0
ldfps f123,f124=[sp] // M1
mov f125=f0 // F
setf.s f126=r0 // M2
setf.s f127=r0 // M3
br.ret.sptk.many rp // F
END(__ia64_init_fpu)
/*
* Switch execution mode from virtual to physical
*
* Inputs:
* r16 = new psr to establish
* Output:
* r19 = old virtual address of ar.bsp
* r20 = old virtual address of sp
*
* Note: RSE must already be in enforced lazy mode
*/
GLOBAL_ENTRY(ia64_switch_mode_phys)
{
rsm psr.i | psr.ic // disable interrupts and interrupt collection
mov r15=ip
}
;;
{
flushrs // must be first insn in group
srlz.i
}
;;
mov cr.ipsr=r16 // set new PSR
add r3=1f-ia64_switch_mode_phys,r15
mov r19=ar.bsp
mov r20=sp
mov r14=rp // get return address into a general register
;;
// going to physical mode, use tpa to translate virt->phys
tpa r17=r19
tpa r3=r3
tpa sp=sp
tpa r14=r14
;;
mov r18=ar.rnat // save ar.rnat
mov ar.bspstore=r17 // this steps on ar.rnat
mov cr.iip=r3
mov cr.ifs=r0
;;
mov ar.rnat=r18 // restore ar.rnat
rfi // must be last insn in group
;;
1: mov rp=r14
br.ret.sptk.many rp
END(ia64_switch_mode_phys)
/*
* Switch execution mode from physical to virtual
*
* Inputs:
* r16 = new psr to establish
* r19 = new bspstore to establish
* r20 = new sp to establish
*
* Note: RSE must already be in enforced lazy mode
*/
GLOBAL_ENTRY(ia64_switch_mode_virt)
{
rsm psr.i | psr.ic // disable interrupts and interrupt collection
mov r15=ip
}
;;
{
flushrs // must be first insn in group
srlz.i
}
;;
mov cr.ipsr=r16 // set new PSR
add r3=1f-ia64_switch_mode_virt,r15
mov r14=rp // get return address into a general register
;;
// going to virtual
// - for code addresses, set upper bits of addr to KERNEL_START
// - for stack addresses, copy from input argument
movl r18=KERNEL_START
dep r3=0,r3,KERNEL_TR_PAGE_SHIFT,64-KERNEL_TR_PAGE_SHIFT
dep r14=0,r14,KERNEL_TR_PAGE_SHIFT,64-KERNEL_TR_PAGE_SHIFT
mov sp=r20
;;
or r3=r3,r18
or r14=r14,r18
;;
mov r18=ar.rnat // save ar.rnat
mov ar.bspstore=r19 // this steps on ar.rnat
mov cr.iip=r3
mov cr.ifs=r0
;;
mov ar.rnat=r18 // restore ar.rnat
rfi // must be last insn in group
;;
1: mov rp=r14
br.ret.sptk.many rp
END(ia64_switch_mode_virt)
GLOBAL_ENTRY(ia64_delay_loop)
.prologue
{ nop 0 // work around GAS unwind info generation bug...
.save ar.lc,r2
mov r2=ar.lc
.body
;;
mov ar.lc=r32
}
;;
// force loop to be 32-byte aligned (GAS bug means we cannot use .align
// inside function body without corrupting unwind info).
{ nop 0 }
1: br.cloop.sptk.few 1b
;;
mov ar.lc=r2
br.ret.sptk.many rp
END(ia64_delay_loop)
/*
* Return a CPU-local timestamp in nano-seconds. This timestamp is
* NOT synchronized across CPUs its return value must never be
* compared against the values returned on another CPU. The usage in
* kernel/sched.c ensures that.
*
* The return-value of sched_clock() is NOT supposed to wrap-around.
* If it did, it would cause some scheduling hiccups (at the worst).
* Fortunately, with a 64-bit cycle-counter ticking at 100GHz, even
* that would happen only once every 5+ years.
*
* The code below basically calculates:
*
* (ia64_get_itc() * local_cpu_data->nsec_per_cyc) >> IA64_NSEC_PER_CYC_SHIFT
*
* except that the multiplication and the shift are done with 128-bit
* intermediate precision so that we can produce a full 64-bit result.
*/
GLOBAL_ENTRY(ia64_native_sched_clock)
addl r8=THIS_CPU(cpu_info) + IA64_CPUINFO_NSEC_PER_CYC_OFFSET,r0
mov.m r9=ar.itc // fetch cycle-counter (35 cyc)
;;
ldf8 f8=[r8]
;;
setf.sig f9=r9 // certain to stall, so issue it _after_ ldf8...
;;
xmpy.lu f10=f9,f8 // calculate low 64 bits of 128-bit product (4 cyc)
xmpy.hu f11=f9,f8 // calculate high 64 bits of 128-bit product
;;
getf.sig r8=f10 // (5 cyc)
getf.sig r9=f11
;;
shrp r8=r9,r8,IA64_NSEC_PER_CYC_SHIFT
br.ret.sptk.many rp
END(ia64_native_sched_clock)
#ifndef CONFIG_PARAVIRT
//unsigned long long
//sched_clock(void) __attribute__((alias("ia64_native_sched_clock")));
.global sched_clock
sched_clock = ia64_native_sched_clock
#endif
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
GLOBAL_ENTRY(cycle_to_cputime)
alloc r16=ar.pfs,1,0,0,0
addl r8=THIS_CPU(cpu_info) + IA64_CPUINFO_NSEC_PER_CYC_OFFSET,r0
;;
ldf8 f8=[r8]
;;
setf.sig f9=r32
;;
xmpy.lu f10=f9,f8 // calculate low 64 bits of 128-bit product (4 cyc)
xmpy.hu f11=f9,f8 // calculate high 64 bits of 128-bit product
;;
getf.sig r8=f10 // (5 cyc)
getf.sig r9=f11
;;
shrp r8=r9,r8,IA64_NSEC_PER_CYC_SHIFT
br.ret.sptk.many rp
END(cycle_to_cputime)
#endif /* CONFIG_VIRT_CPU_ACCOUNTING */
GLOBAL_ENTRY(start_kernel_thread)
.prologue
.save rp, r0 // this is the end of the call-chain
.body
alloc r2 = ar.pfs, 0, 0, 2, 0
mov out0 = r9
mov out1 = r11;;
br.call.sptk.many rp = kernel_thread_helper;;
mov out0 = r8
br.call.sptk.many rp = sys_exit;;
1: br.sptk.few 1b // not reached
END(start_kernel_thread)
#ifdef CONFIG_IA64_BRL_EMU
/*
* Assembly routines used by brl_emu.c to set preserved register state.
*/
#define SET_REG(reg) \
GLOBAL_ENTRY(ia64_set_##reg); \
alloc r16=ar.pfs,1,0,0,0; \
mov reg=r32; \
;; \
br.ret.sptk.many rp; \
END(ia64_set_##reg)
SET_REG(b1);
SET_REG(b2);
SET_REG(b3);
SET_REG(b4);
SET_REG(b5);
#endif /* CONFIG_IA64_BRL_EMU */
#ifdef CONFIG_SMP
/*
* This routine handles spinlock contention. It uses a non-standard calling
* convention to avoid converting leaf routines into interior routines. Because
* of this special convention, there are several restrictions:
*
* - do not use gp relative variables, this code is called from the kernel
* and from modules, r1 is undefined.
* - do not use stacked registers, the caller owns them.
* - do not use the scratch stack space, the caller owns it.
* - do not use any registers other than the ones listed below
*
* Inputs:
* ar.pfs - saved CFM of caller
* ar.ccv - 0 (and available for use)
* r27 - flags from spin_lock_irqsave or 0. Must be preserved.
* r28 - available for use.
* r29 - available for use.
* r30 - available for use.
* r31 - address of lock, available for use.
* b6 - return address
* p14 - available for use.
* p15 - used to track flag status.
*
* If you patch this code to use more registers, do not forget to update
* the clobber lists for spin_lock() in arch/ia64/include/asm/spinlock.h.
*/
#if (__GNUC__ == 3 && __GNUC_MINOR__ < 3)
GLOBAL_ENTRY(ia64_spinlock_contention_pre3_4)
.prologue
.save ar.pfs, r0 // this code effectively has a zero frame size
.save rp, r28
.body
nop 0
tbit.nz p15,p0=r27,IA64_PSR_I_BIT
.restore sp // pop existing prologue after next insn
mov b6 = r28
.prologue
.save ar.pfs, r0
.altrp b6
.body
;;
(p15) ssm psr.i // reenable interrupts if they were on
// DavidM says that srlz.d is slow and is not required in this case
.wait:
// exponential backoff, kdb, lockmeter etc. go in here
hint @pause
ld4 r30=[r31] // don't use ld4.bias; if it's contended, we won't write the word
nop 0
;;
cmp4.ne p14,p0=r30,r0
(p14) br.cond.sptk.few .wait
(p15) rsm psr.i // disable interrupts if we reenabled them
br.cond.sptk.few b6 // lock is now free, try to acquire
.global ia64_spinlock_contention_pre3_4_end // for kernprof
ia64_spinlock_contention_pre3_4_end:
END(ia64_spinlock_contention_pre3_4)
#else
GLOBAL_ENTRY(ia64_spinlock_contention)
.prologue
.altrp b6
.body
tbit.nz p15,p0=r27,IA64_PSR_I_BIT
;;
.wait:
(p15) ssm psr.i // reenable interrupts if they were on
// DavidM says that srlz.d is slow and is not required in this case
.wait2:
// exponential backoff, kdb, lockmeter etc. go in here
hint @pause
ld4 r30=[r31] // don't use ld4.bias; if it's contended, we won't write the word
;;
cmp4.ne p14,p0=r30,r0
mov r30 = 1
(p14) br.cond.sptk.few .wait2
(p15) rsm psr.i // disable interrupts if we reenabled them
;;
cmpxchg4.acq r30=[r31], r30, ar.ccv
;;
cmp4.ne p14,p0=r0,r30
(p14) br.cond.sptk.few .wait
br.ret.sptk.many b6 // lock is now taken
END(ia64_spinlock_contention)
#endif
#ifdef CONFIG_HOTPLUG_CPU
GLOBAL_ENTRY(ia64_jump_to_sal)
alloc r16=ar.pfs,1,0,0,0;;
rsm psr.i | psr.ic
{
flushrs
srlz.i
}
tpa r25=in0
movl r18=tlb_purge_done;;
DATA_VA_TO_PA(r18);;
mov b1=r18 // Return location
movl r18=ia64_do_tlb_purge;;
DATA_VA_TO_PA(r18);;
mov b2=r18 // doing tlb_flush work
mov ar.rsc=0 // Put RSE in enforced lazy, LE mode
movl r17=1f;;
DATA_VA_TO_PA(r17);;
mov cr.iip=r17
movl r16=SAL_PSR_BITS_TO_SET;;
mov cr.ipsr=r16
mov cr.ifs=r0;;
rfi;; // note: this unmask MCA/INIT (psr.mc)
1:
/*
* Invalidate all TLB data/inst
*/
br.sptk.many b2;; // jump to tlb purge code
tlb_purge_done:
RESTORE_REGION_REGS(r25, r17,r18,r19);;
RESTORE_REG(b0, r25, r17);;
RESTORE_REG(b1, r25, r17);;
RESTORE_REG(b2, r25, r17);;
RESTORE_REG(b3, r25, r17);;
RESTORE_REG(b4, r25, r17);;
RESTORE_REG(b5, r25, r17);;
ld8 r1=[r25],0x08;;
ld8 r12=[r25],0x08;;
ld8 r13=[r25],0x08;;
RESTORE_REG(ar.fpsr, r25, r17);;
RESTORE_REG(ar.pfs, r25, r17);;
RESTORE_REG(ar.rnat, r25, r17);;
RESTORE_REG(ar.unat, r25, r17);;
RESTORE_REG(ar.bspstore, r25, r17);;
RESTORE_REG(cr.dcr, r25, r17);;
RESTORE_REG(cr.iva, r25, r17);;
RESTORE_REG(cr.pta, r25, r17);;
srlz.d;; // required not to violate RAW dependency
RESTORE_REG(cr.itv, r25, r17);;
RESTORE_REG(cr.pmv, r25, r17);;
RESTORE_REG(cr.cmcv, r25, r17);;
RESTORE_REG(cr.lrr0, r25, r17);;
RESTORE_REG(cr.lrr1, r25, r17);;
ld8 r4=[r25],0x08;;
ld8 r5=[r25],0x08;;
ld8 r6=[r25],0x08;;
ld8 r7=[r25],0x08;;
ld8 r17=[r25],0x08;;
mov pr=r17,-1;;
RESTORE_REG(ar.lc, r25, r17);;
/*
* Now Restore floating point regs
*/
ldf.fill.nta f2=[r25],16;;
ldf.fill.nta f3=[r25],16;;
ldf.fill.nta f4=[r25],16;;
ldf.fill.nta f5=[r25],16;;
ldf.fill.nta f16=[r25],16;;
ldf.fill.nta f17=[r25],16;;
ldf.fill.nta f18=[r25],16;;
ldf.fill.nta f19=[r25],16;;
ldf.fill.nta f20=[r25],16;;
ldf.fill.nta f21=[r25],16;;
ldf.fill.nta f22=[r25],16;;
ldf.fill.nta f23=[r25],16;;
ldf.fill.nta f24=[r25],16;;
ldf.fill.nta f25=[r25],16;;
ldf.fill.nta f26=[r25],16;;
ldf.fill.nta f27=[r25],16;;
ldf.fill.nta f28=[r25],16;;
ldf.fill.nta f29=[r25],16;;
ldf.fill.nta f30=[r25],16;;
ldf.fill.nta f31=[r25],16;;
/*
* Now that we have done all the register restores
* we are now ready for the big DIVE to SAL Land
*/
ssm psr.ic;;
srlz.d;;
br.ret.sptk.many b0;;
END(ia64_jump_to_sal)
#endif /* CONFIG_HOTPLUG_CPU */
#endif /* CONFIG_SMP */
View Git Blame Copy Permalink