kevin/linux
1
Fork 0
Code
f064902457
linux/drivers/usb/serial/ark3116.c
Greg Kroah-Hartman a969888ce9 [PATCH] USB: move usb-serial.h to include/linux/usb/ 
USB serial outside of the kernel tree can not build properly due to
usb-serial.h being buried down in the source tree.  This patch moves the
location of the file to include/linux/usb and fixes up all of the usb
serial drivers to handle the move properly.

Cc: Sergei Organov <osv@javad.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12 16:03:25 -07:00

466 lines
12 KiB
C
Raw Blame History

/*
* ark3116
* - implements a driver for the arkmicro ark3116 chipset (vendor=0x6547,
* productid=0x0232) (used in a datacable called KQ-U8A)
*
* - based on code by krisfx -> thanks !!
* (see http://www.linuxquestions.org/questions/showthread.php?p=2184457#post2184457)
*
* - based on logs created by usbsnoopy
*
* Author : Simon Schulz [ark3116_driver<AT>auctionant.de]
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/tty.h>
#include <linux/module.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
static int debug;
static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x6547, 0x0232) },
{ },
};
MODULE_DEVICE_TABLE(usb, id_table);
struct ark3116_private {
spinlock_t lock;
u8 termios_initialized;
};
static inline void ARK3116_SND(struct usb_serial *serial, int seq,
__u8 request, __u8 requesttype,
__u16 value, __u16 index)
{
int result;
result = usb_control_msg(serial->dev,
usb_sndctrlpipe(serial->dev,0),
request, requesttype, value, index,
NULL,0x00, 1000);
dbg("%03d > ok",seq);
}
static inline void ARK3116_RCV(struct usb_serial *serial, int seq,
__u8 request, __u8 requesttype,
__u16 value, __u16 index, __u8 expected,
char *buf)
{
int result;
result = usb_control_msg(serial->dev,
usb_rcvctrlpipe(serial->dev,0),
request, requesttype, value, index,
buf, 0x0000001, 1000);
if (result)
dbg("%03d < %d bytes [0x%02X]",seq, result, buf[0]);
else
dbg("%03d < 0 bytes", seq);
}
static inline void ARK3116_RCV_QUIET(struct usb_serial *serial,
__u8 request, __u8 requesttype,
__u16 value, __u16 index, char *buf)
{
usb_control_msg(serial->dev,
usb_rcvctrlpipe(serial->dev,0),
request, requesttype, value, index,
buf, 0x0000001, 1000);
}
static int ark3116_attach(struct usb_serial *serial)
{
char *buf;
struct ark3116_private *priv;
int i;
for (i = 0; i < serial->num_ports; ++i) {
priv = kmalloc (sizeof (struct ark3116_private), GFP_KERNEL);
if (!priv)
goto cleanup;
memset (priv, 0x00, sizeof (struct ark3116_private));
spin_lock_init(&priv->lock);
usb_set_serial_port_data(serial->port[i], priv);
}
buf = kmalloc(1, GFP_KERNEL);
if (!buf) {
dbg("error kmalloc -> out of mem ?");
goto cleanup;
}
/* 3 */
ARK3116_SND(serial, 3,0xFE,0x40,0x0008,0x0002);
ARK3116_SND(serial, 4,0xFE,0x40,0x0008,0x0001);
ARK3116_SND(serial, 5,0xFE,0x40,0x0000,0x0008);
ARK3116_SND(serial, 6,0xFE,0x40,0x0000,0x000B);
/* <-- seq7 */
ARK3116_RCV(serial, 7,0xFE,0xC0,0x0000,0x0003, 0x00, buf);
ARK3116_SND(serial, 8,0xFE,0x40,0x0080,0x0003);
ARK3116_SND(serial, 9,0xFE,0x40,0x001A,0x0000);
ARK3116_SND(serial,10,0xFE,0x40,0x0000,0x0001);
ARK3116_SND(serial,11,0xFE,0x40,0x0000,0x0003);
/* <-- seq12 */
ARK3116_RCV(serial,12,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
ARK3116_SND(serial,13,0xFE,0x40,0x0000,0x0004);
/* 14 */
ARK3116_RCV(serial,14,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
ARK3116_SND(serial,15,0xFE,0x40,0x0000,0x0004);
/* 16 */
ARK3116_RCV(serial,16,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
/* --> seq17 */
ARK3116_SND(serial,17,0xFE,0x40,0x0001,0x0004);
/* <-- seq18 */
ARK3116_RCV(serial,18,0xFE,0xC0,0x0000,0x0004, 0x01, buf);
/* --> seq19 */
ARK3116_SND(serial,19,0xFE,0x40,0x0003,0x0004);
/* <-- seq20 */
/* seems like serial port status info (RTS, CTS,...) */
/* returns modem control line status ?! */
ARK3116_RCV(serial,20,0xFE,0xC0,0x0000,0x0006, 0xFF, buf);
/* set 9600 baud & do some init ?! */
ARK3116_SND(serial,147,0xFE,0x40,0x0083,0x0003);
ARK3116_SND(serial,148,0xFE,0x40,0x0038,0x0000);
ARK3116_SND(serial,149,0xFE,0x40,0x0001,0x0001);
ARK3116_SND(serial,150,0xFE,0x40,0x0003,0x0003);
ARK3116_RCV(serial,151,0xFE,0xC0,0x0000,0x0004,0x03, buf);
ARK3116_SND(serial,152,0xFE,0x40,0x0000,0x0003);
ARK3116_RCV(serial,153,0xFE,0xC0,0x0000,0x0003,0x00, buf);
ARK3116_SND(serial,154,0xFE,0x40,0x0003,0x0003);
kfree(buf);
return(0);
cleanup:
for (--i; i>=0; --i)
usb_set_serial_port_data(serial->port[i], NULL);
return -ENOMEM;
}
static void ark3116_set_termios(struct usb_serial_port *port,
struct termios *old_termios)
{
struct usb_serial *serial = port->serial;
struct ark3116_private *priv = usb_get_serial_port_data(port);
unsigned int cflag = port->tty->termios->c_cflag;
unsigned long flags;
int baud;
int ark3116_baud;
char *buf;
char config;
config = 0;
dbg("%s - port %d", __FUNCTION__, port->number);
if ((!port->tty) || (!port->tty->termios)) {
dbg("%s - no tty structures", __FUNCTION__);
return;
}
spin_lock_irqsave(&priv->lock, flags);
if (!priv->termios_initialized) {
*(port->tty->termios) = tty_std_termios;
port->tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
priv->termios_initialized = 1;
}
spin_unlock_irqrestore(&priv->lock, flags);
cflag = port->tty->termios->c_cflag;
/* check that they really want us to change something: */
if (old_termios) {
if ((cflag == old_termios->c_cflag) &&
(RELEVANT_IFLAG(port->tty->termios->c_iflag) ==
RELEVANT_IFLAG(old_termios->c_iflag))) {
dbg("%s - nothing to change...", __FUNCTION__);
return;
}
}
buf = kmalloc(1, GFP_KERNEL);
if (!buf) {
dbg("error kmalloc");
return;
}
/* set data bit count (8/7/6/5) */
if (cflag & CSIZE){
switch (cflag & CSIZE){
case CS5:
config |= 0x00;
dbg("setting CS5");
break;
case CS6:
config |= 0x01;
dbg("setting CS6");
break;
case CS7:
config |= 0x02;
dbg("setting CS7");
break;
default:
err ("CSIZE was set but not CS5-CS8, using CS8!");
case CS8:
config |= 0x03;
dbg("setting CS8");
break;
}
}
/* set parity (NONE,EVEN,ODD) */
if (cflag & PARENB){
if (cflag & PARODD) {
config |= 0x08;
dbg("setting parity to ODD");
} else {
config |= 0x18;
dbg("setting parity to EVEN");
}
} else {
dbg("setting parity to NONE");
}
/* SET STOPBIT (1/2) */
if (cflag & CSTOPB) {
config |= 0x04;
dbg ("setting 2 stop bits");
} else {
dbg ("setting 1 stop bit");
}
/* set baudrate: */
baud = 0;
switch (cflag & CBAUD){
case B0:
err("can't set 0baud, using 9600 instead");
break;
case B75: baud = 75; break;
case B150: baud = 150; break;
case B300: baud = 300; break;
case B600: baud = 600; break;
case B1200: baud = 1200; break;
case B1800: baud = 1800; break;
case B2400: baud = 2400; break;
case B4800: baud = 4800; break;
case B9600: baud = 9600; break;
case B19200: baud = 19200; break;
case B38400: baud = 38400; break;
case B57600: baud = 57600; break;
case B115200: baud = 115200; break;
case B230400: baud = 230400; break;
case B460800: baud = 460800; break;
default:
dbg("does not support the baudrate requested (fix it)");
break;
}
/* set 9600 as default (if given baudrate is invalid for example) */
if (baud == 0)
baud = 9600;
/*
* found by try'n'error, be careful, maybe there are other options
* for multiplicator etc!
*/
if (baud == 460800)
/* strange, for 460800 the formula is wrong
* (dont use round(), then 9600baud is wrong) */
ark3116_baud = 7;
else
ark3116_baud = 3000000 / baud;
/* ? */
ARK3116_RCV(serial,0,0xFE,0xC0,0x0000,0x0003, 0x03, buf);
/* offset = buf[0]; */
/* offset = 0x03; */
/* dbg("using 0x%04X as target for 0x0003:",0x0080+offset); */
/* set baudrate */
dbg("setting baudrate to %d (->reg=%d)",baud,ark3116_baud);
ARK3116_SND(serial,147,0xFE,0x40,0x0083,0x0003);
ARK3116_SND(serial,148,0xFE,0x40,(ark3116_baud & 0x00FF) ,0x0000);
ARK3116_SND(serial,149,0xFE,0x40,(ark3116_baud & 0xFF00)>>8,0x0001);
ARK3116_SND(serial,150,0xFE,0x40,0x0003,0x0003);
/* ? */
ARK3116_RCV(serial,151,0xFE,0xC0,0x0000,0x0004,0x03, buf);
ARK3116_SND(serial,152,0xFE,0x40,0x0000,0x0003);
/* set data bit count, stop bit count & parity: */
dbg("updating bit count, stop bit or parity (cfg=0x%02X)", config);
ARK3116_RCV(serial,153,0xFE,0xC0,0x0000,0x0003,0x00, buf);
ARK3116_SND(serial,154,0xFE,0x40,config,0x0003);
if (cflag & CRTSCTS)
dbg("CRTSCTS not supported by chipset ?!");
/* TEST ARK3116_SND(154,0xFE,0x40,0xFFFF, 0x0006); */
kfree(buf);
return;
}
static int ark3116_open(struct usb_serial_port *port, struct file *filp)
{
struct termios tmp_termios;
struct usb_serial *serial = port->serial;
char *buf;
int result = 0;
dbg("%s - port %d", __FUNCTION__, port->number);
buf = kmalloc(1, GFP_KERNEL);
if (!buf) {
dbg("error kmalloc -> out of mem ?");
return -ENOMEM;
}
result = usb_serial_generic_open(port, filp);
if (result)
return result;
/* open */
ARK3116_RCV(serial,111,0xFE,0xC0,0x0000,0x0003, 0x02, buf);
ARK3116_SND(serial,112,0xFE,0x40,0x0082,0x0003);
ARK3116_SND(serial,113,0xFE,0x40,0x001A,0x0000);
ARK3116_SND(serial,114,0xFE,0x40,0x0000,0x0001);
ARK3116_SND(serial,115,0xFE,0x40,0x0002,0x0003);
ARK3116_RCV(serial,116,0xFE,0xC0,0x0000,0x0004, 0x03, buf);
ARK3116_SND(serial,117,0xFE,0x40,0x0002,0x0004);
ARK3116_RCV(serial,118,0xFE,0xC0,0x0000,0x0004, 0x02, buf);
ARK3116_SND(serial,119,0xFE,0x40,0x0000,0x0004);
ARK3116_RCV(serial,120,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
ARK3116_SND(serial,121,0xFE,0x40,0x0001,0x0004);
ARK3116_RCV(serial,122,0xFE,0xC0,0x0000,0x0004, 0x01, buf);
ARK3116_SND(serial,123,0xFE,0x40,0x0003,0x0004);
/* returns different values (control lines ?!) */
ARK3116_RCV(serial,124,0xFE,0xC0,0x0000,0x0006, 0xFF, buf);
/* initialise termios: */
if (port->tty)
ark3116_set_termios(port, &tmp_termios);
kfree(buf);
return result;
}
static int ark3116_ioctl(struct usb_serial_port *port, struct file *file,
unsigned int cmd, unsigned long arg)
{
dbg("ioctl not supported yet...");
return -ENOIOCTLCMD;
}
static int ark3116_tiocmget(struct usb_serial_port *port, struct file *file)
{
struct usb_serial *serial = port->serial;
char *buf;
char temp;
/* seems like serial port status info (RTS, CTS,...) is stored
* in reg(?) 0x0006
* pcb connection point 11 = GND -> sets bit4 of response
* pcb connection point 7 = GND -> sets bit6 of response
*/
buf = kmalloc(1, GFP_KERNEL);
if (!buf) {
dbg("error kmalloc");
return -ENOMEM;
}
/* read register: */
ARK3116_RCV_QUIET(serial,0xFE,0xC0,0x0000,0x0006,buf);
temp = buf[0];
kfree(buf);
/* i do not really know if bit4=CTS and bit6=DSR... was just a
* quick guess !!
*/
return (temp & (1<<4) ? TIOCM_CTS : 0) |
(temp & (1<<6) ? TIOCM_DSR : 0);
}
static struct usb_driver ark3116_driver = {
.name = "ark3116",
.probe = usb_serial_probe,
.disconnect = usb_serial_disconnect,
.id_table = id_table,
};
static struct usb_serial_driver ark3116_device = {
.driver = {
.owner = THIS_MODULE,
.name = "ark3116",
},
.id_table = id_table,
.num_interrupt_in = 1,
.num_bulk_in = 1,
.num_bulk_out = 1,
.num_ports = 1,
.attach = ark3116_attach,
.set_termios = ark3116_set_termios,
.ioctl = ark3116_ioctl,
.tiocmget = ark3116_tiocmget,
.open = ark3116_open,
};
static int __init ark3116_init(void)
{
int retval;
retval = usb_serial_register(&ark3116_device);
if (retval)
return retval;
retval = usb_register(&ark3116_driver);
if (retval)
usb_serial_deregister(&ark3116_device);
return retval;
}
static void __exit ark3116_exit(void)
{
usb_deregister(&ark3116_driver);
usb_serial_deregister(&ark3116_device);
}
module_init(ark3116_init);
module_exit(ark3116_exit);
MODULE_LICENSE("GPL");
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug enabled or not");
View Git Blame Copy Permalink