kevin/linux
1
Fork 0
Code
ee20a0dd54
linux/drivers/net/sk98lin/skxmac2.c
Stephen Hemminger 5ad887fa8e sk98lin: resurrect driver 
This reverts commit e1abecc489.

The driver works on some hardware that skge doesn't handle yet.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-15 19:35:14 -04:00

4161 lines
103 KiB
C
Raw Blame History

/******************************************************************************
*
* Name: skxmac2.c
* Project: Gigabit Ethernet Adapters, Common Modules
* Version: $Revision: 1.102 $
* Date: $Date: 2003/10/02 16:53:58 $
* Purpose: Contains functions to initialize the MACs and PHYs
*
******************************************************************************/
/******************************************************************************
*
* (C)Copyright 1998-2002 SysKonnect.
* (C)Copyright 2002-2003 Marvell.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* The information in this file is provided "AS IS" without warranty.
*
******************************************************************************/
#include "h/skdrv1st.h"
#include "h/skdrv2nd.h"
/* typedefs *******************************************************************/
/* BCOM PHY magic pattern list */
typedef struct s_PhyHack {
int PhyReg; /* Phy register */
SK_U16 PhyVal; /* Value to write */
} BCOM_HACK;
/* local variables ************************************************************/
#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM))))
static const char SysKonnectFileId[] =
"@(#) $Id: skxmac2.c,v 1.102 2003/10/02 16:53:58 rschmidt Exp $ (C) Marvell.";
#endif
#ifdef GENESIS
static BCOM_HACK BcomRegA1Hack[] = {
{ 0x18, 0x0c20 }, { 0x17, 0x0012 }, { 0x15, 0x1104 }, { 0x17, 0x0013 },
{ 0x15, 0x0404 }, { 0x17, 0x8006 }, { 0x15, 0x0132 }, { 0x17, 0x8006 },
{ 0x15, 0x0232 }, { 0x17, 0x800D }, { 0x15, 0x000F }, { 0x18, 0x0420 },
{ 0, 0 }
};
static BCOM_HACK BcomRegC0Hack[] = {
{ 0x18, 0x0c20 }, { 0x17, 0x0012 }, { 0x15, 0x1204 }, { 0x17, 0x0013 },
{ 0x15, 0x0A04 }, { 0x18, 0x0420 },
{ 0, 0 }
};
#endif
/* function prototypes ********************************************************/
#ifdef GENESIS
static void SkXmInitPhyXmac(SK_AC*, SK_IOC, int, SK_BOOL);
static void SkXmInitPhyBcom(SK_AC*, SK_IOC, int, SK_BOOL);
static int SkXmAutoNegDoneXmac(SK_AC*, SK_IOC, int);
static int SkXmAutoNegDoneBcom(SK_AC*, SK_IOC, int);
#endif /* GENESIS */
#ifdef YUKON
static void SkGmInitPhyMarv(SK_AC*, SK_IOC, int, SK_BOOL);
static int SkGmAutoNegDoneMarv(SK_AC*, SK_IOC, int);
#endif /* YUKON */
#ifdef OTHER_PHY
static void SkXmInitPhyLone(SK_AC*, SK_IOC, int, SK_BOOL);
static void SkXmInitPhyNat (SK_AC*, SK_IOC, int, SK_BOOL);
static int SkXmAutoNegDoneLone(SK_AC*, SK_IOC, int);
static int SkXmAutoNegDoneNat (SK_AC*, SK_IOC, int);
#endif /* OTHER_PHY */
#ifdef GENESIS
/******************************************************************************
*
* SkXmPhyRead() - Read from XMAC PHY register
*
* Description: reads a 16-bit word from XMAC PHY or ext. PHY
*
* Returns:
* nothing
*/
void SkXmPhyRead(
SK_AC *pAC, /* Adapter Context */
SK_IOC IoC, /* I/O Context */
int Port, /* Port Index (MAC_1 + n) */
int PhyReg, /* Register Address (Offset) */
SK_U16 SK_FAR *pVal) /* Pointer to Value */
{
SK_U16 Mmu;
SK_GEPORT *pPrt;
pPrt = &pAC->GIni.GP[Port];
/* write the PHY register's address */
XM_OUT16(IoC, Port, XM_PHY_ADDR, PhyReg | pPrt->PhyAddr);
/* get the PHY register's value */
XM_IN16(IoC, Port, XM_PHY_DATA, pVal);
if (pPrt->PhyType != SK_PHY_XMAC) {
do {
XM_IN16(IoC, Port, XM_MMU_CMD, &Mmu);
/* wait until 'Ready' is set */
} while ((Mmu & XM_MMU_PHY_RDY) == 0);
/* get the PHY register's value */
XM_IN16(IoC, Port, XM_PHY_DATA, pVal);
}
} /* SkXmPhyRead */
/******************************************************************************
*
* SkXmPhyWrite() - Write to XMAC PHY register
*
* Description: writes a 16-bit word to XMAC PHY or ext. PHY
*
* Returns:
* nothing
*/
void SkXmPhyWrite(
SK_AC *pAC, /* Adapter Context */
SK_IOC IoC, /* I/O Context */
int Port, /* Port Index (MAC_1 + n) */
int PhyReg, /* Register Address (Offset) */
SK_U16 Val) /* Value */
{
SK_U16 Mmu;
SK_GEPORT *pPrt;
pPrt = &pAC->GIni.GP[Port];
if (pPrt->PhyType != SK_PHY_XMAC) {
do {
XM_IN16(IoC, Port, XM_MMU_CMD, &Mmu);
/* wait until 'Busy' is cleared */
} while ((Mmu & XM_MMU_PHY_BUSY) != 0);
}
/* write the PHY register's address */
XM_OUT16(IoC, Port, XM_PHY_ADDR, PhyReg | pPrt->PhyAddr);
/* write the PHY register's value */
XM_OUT16(IoC, Port, XM_PHY_DATA, Val);
if (pPrt->PhyType != SK_PHY_XMAC) {
do {
XM_IN16(IoC, Port, XM_MMU_CMD, &Mmu);
/* wait until 'Busy' is cleared */
} while ((Mmu & XM_MMU_PHY_BUSY) != 0);
}
} /* SkXmPhyWrite */
#endif /* GENESIS */
#ifdef YUKON
/******************************************************************************
*
* SkGmPhyRead() - Read from GPHY register
*
* Description: reads a 16-bit word from GPHY through MDIO
*
* Returns:
* nothing
*/
void SkGmPhyRead(
SK_AC *pAC, /* Adapter Context */
SK_IOC IoC, /* I/O Context */
int Port, /* Port Index (MAC_1 + n) */
int PhyReg, /* Register Address (Offset) */
SK_U16 SK_FAR *pVal) /* Pointer to Value */
{
SK_U16 Ctrl;
SK_GEPORT *pPrt;
#ifdef VCPU
u_long SimCyle;
u_long SimLowTime;
VCPUgetTime(&SimCyle, &SimLowTime);
VCPUprintf(0, "SkGmPhyRead(%u), SimCyle=%u, SimLowTime=%u\n",
PhyReg, SimCyle, SimLowTime);
#endif /* VCPU */
pPrt = &pAC->GIni.GP[Port];
/* set PHY-Register offset and 'Read' OpCode (= 1) */
*pVal = (SK_U16)(GM_SMI_CT_PHY_AD(pPrt->PhyAddr) |
GM_SMI_CT_REG_AD(PhyReg) | GM_SMI_CT_OP_RD);
GM_OUT16(IoC, Port, GM_SMI_CTRL, *pVal);
GM_IN16(IoC, Port, GM_SMI_CTRL, &Ctrl);
/* additional check for MDC/MDIO activity */
if ((Ctrl & GM_SMI_CT_BUSY) == 0) {
*pVal = 0;
return;
}
*pVal |= GM_SMI_CT_BUSY;
do {
#ifdef VCPU
VCPUwaitTime(1000);
#endif /* VCPU */
GM_IN16(IoC, Port, GM_SMI_CTRL, &Ctrl);
/* wait until 'ReadValid' is set */
} while (Ctrl == *pVal);
/* get the PHY register's value */
GM_IN16(IoC, Port, GM_SMI_DATA, pVal);
#ifdef VCPU
VCPUgetTime(&SimCyle, &SimLowTime);
VCPUprintf(0, "VCPUgetTime(), SimCyle=%u, SimLowTime=%u\n",
SimCyle, SimLowTime);
#endif /* VCPU */
} /* SkGmPhyRead */
/******************************************************************************
*
* SkGmPhyWrite() - Write to GPHY register
*
* Description: writes a 16-bit word to GPHY through MDIO
*
* Returns:
* nothing
*/
void SkGmPhyWrite(
SK_AC *pAC, /* Adapter Context */
SK_IOC IoC, /* I/O Context */
int Port, /* Port Index (MAC_1 + n) */
int PhyReg, /* Register Address (Offset) */
SK_U16 Val) /* Value */
{
SK_U16 Ctrl;
SK_GEPORT *pPrt;
#ifdef VCPU
SK_U32 DWord;
u_long SimCyle;
u_long SimLowTime;
VCPUgetTime(&SimCyle, &SimLowTime);
VCPUprintf(0, "SkGmPhyWrite(Reg=%u, Val=0x%04x), SimCyle=%u, SimLowTime=%u\n",
PhyReg, Val, SimCyle, SimLowTime);
#endif /* VCPU */
pPrt = &pAC->GIni.GP[Port];
/* write the PHY register's value */
GM_OUT16(IoC, Port, GM_SMI_DATA, Val);
/* set PHY-Register offset and 'Write' OpCode (= 0) */
Val = GM_SMI_CT_PHY_AD(pPrt->PhyAddr) | GM_SMI_CT_REG_AD(PhyReg);
GM_OUT16(IoC, Port, GM_SMI_CTRL, Val);
GM_IN16(IoC, Port, GM_SMI_CTRL, &Ctrl);
/* additional check for MDC/MDIO activity */
if ((Ctrl & GM_SMI_CT_BUSY) == 0) {
return;
}
Val |= GM_SMI_CT_BUSY;
do {
#ifdef VCPU
/* read Timer value */
SK_IN32(IoC, B2_TI_VAL, &DWord);
VCPUwaitTime(1000);
#endif /* VCPU */
GM_IN16(IoC, Port, GM_SMI_CTRL, &Ctrl);
/* wait until 'Busy' is cleared */
} while (Ctrl == Val);
#ifdef VCPU
VCPUgetTime(&SimCyle, &SimLowTime);
VCPUprintf(0, "VCPUgetTime(), SimCyle=%u, SimLowTime=%u\n",
SimCyle, SimLowTime);
#endif /* VCPU */
} /* SkGmPhyWrite */
#endif /* YUKON */
#ifdef SK_DIAG
/******************************************************************************
*
* SkGePhyRead() - Read from PHY register
*
* Description: calls a read PHY routine dep. on board type
*
* Returns:
* nothing
*/
void SkGePhyRead(
SK_AC *pAC, /* Adapter Context */
SK_IOC IoC, /* I/O Context */
int Port, /* Port Index (MAC_1 + n) */
int PhyReg, /* Register Address (Offset) */
SK_U16 *pVal) /* Pointer to Value */
{
void (*r_func)(SK_AC *pAC, SK_IOC IoC, int Port, int Reg, SK_U16 *pVal);
if (pAC->GIni.GIGenesis) {
r_func = SkXmPhyRead;
}
else {
r_func = SkGmPhyRead;
}
r_func(pAC, IoC, Port, PhyReg, pVal);
} /* SkGePhyRead */
/******************************************************************************
*
* SkGePhyWrite() - Write to PHY register
*
* Description: calls a write PHY routine dep. on board type
*
* Returns:
* nothing
*/
void SkGePhyWrite(
SK_AC *pAC, /* Adapter Context */
SK_IOC IoC, /* I/O Context */
int Port, /* Port Index (MAC_1 + n) */
int PhyReg, /* Register Address (Offset) */
SK_U16 Val) /* Value */
{
void (*w_func)(SK_AC *pAC, SK_IOC IoC, int Port, int Reg, SK_U16 Val);
if (pAC->GIni.GIGenesis) {
w_func = SkXmPhyWrite;
}
else {
w_func = SkGmPhyWrite;
}
w_func(pAC, IoC, Port, PhyReg, Val);
} /* SkGePhyWrite */
#endif /* SK_DIAG */
/******************************************************************************
*
* SkMacPromiscMode() - Enable / Disable Promiscuous Mode
*
* Description:
* enables / disables promiscuous mode by setting Mode Register (XMAC) or
* Receive Control Register (GMAC) dep. on board type
*
* Returns:
* nothing
*/
void SkMacPromiscMode(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port, /* Port Index (MAC_1 + n) */
SK_BOOL Enable) /* Enable / Disable */
{
#ifdef YUKON
SK_U16 RcReg;
#endif
#ifdef GENESIS
SK_U32 MdReg;
#endif
#ifdef GENESIS
if (pAC->GIni.GIGenesis) {
XM_IN32(IoC, Port, XM_MODE, &MdReg);
/* enable or disable promiscuous mode */
if (Enable) {
MdReg |= XM_MD_ENA_PROM;
}
else {
MdReg &= ~XM_MD_ENA_PROM;
}
/* setup Mode Register */
XM_OUT32(IoC, Port, XM_MODE, MdReg);
}
#endif /* GENESIS */
#ifdef YUKON
if (pAC->GIni.GIYukon) {
GM_IN16(IoC, Port, GM_RX_CTRL, &RcReg);
/* enable or disable unicast and multicast filtering */
if (Enable) {
RcReg &= ~(GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA);
}
else {
RcReg |= (GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA);
}
/* setup Receive Control Register */
GM_OUT16(IoC, Port, GM_RX_CTRL, RcReg);
}
#endif /* YUKON */
} /* SkMacPromiscMode*/
/******************************************************************************
*
* SkMacHashing() - Enable / Disable Hashing
*
* Description:
* enables / disables hashing by setting Mode Register (XMAC) or
* Receive Control Register (GMAC) dep. on board type
*
* Returns:
* nothing
*/
void SkMacHashing(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port, /* Port Index (MAC_1 + n) */
SK_BOOL Enable) /* Enable / Disable */
{
#ifdef YUKON
SK_U16 RcReg;
#endif
#ifdef GENESIS
SK_U32 MdReg;
#endif
#ifdef GENESIS
if (pAC->GIni.GIGenesis) {
XM_IN32(IoC, Port, XM_MODE, &MdReg);
/* enable or disable hashing */
if (Enable) {
MdReg |= XM_MD_ENA_HASH;
}
else {
MdReg &= ~XM_MD_ENA_HASH;
}
/* setup Mode Register */
XM_OUT32(IoC, Port, XM_MODE, MdReg);
}
#endif /* GENESIS */
#ifdef YUKON
if (pAC->GIni.GIYukon) {
GM_IN16(IoC, Port, GM_RX_CTRL, &RcReg);
/* enable or disable multicast filtering */
if (Enable) {
RcReg |= GM_RXCR_MCF_ENA;
}
else {
RcReg &= ~GM_RXCR_MCF_ENA;
}
/* setup Receive Control Register */
GM_OUT16(IoC, Port, GM_RX_CTRL, RcReg);
}
#endif /* YUKON */
} /* SkMacHashing*/
#ifdef SK_DIAG
/******************************************************************************
*
* SkXmSetRxCmd() - Modify the value of the XMAC's Rx Command Register
*
* Description:
* The features
* - FCS stripping, SK_STRIP_FCS_ON/OFF
* - pad byte stripping, SK_STRIP_PAD_ON/OFF
* - don't set XMR_FS_ERR in status SK_LENERR_OK_ON/OFF
* for inrange length error frames
* - don't set XMR_FS_ERR in status SK_BIG_PK_OK_ON/OFF
* for frames > 1514 bytes
* - enable Rx of own packets SK_SELF_RX_ON/OFF
*
* for incoming packets may be enabled/disabled by this function.
* Additional modes may be added later.
* Multiple modes can be enabled/disabled at the same time.
* The new configuration is written to the Rx Command register immediately.
*
* Returns:
* nothing
*/
static void SkXmSetRxCmd(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port, /* Port Index (MAC_1 + n) */
int Mode) /* Mode is SK_STRIP_FCS_ON/OFF, SK_STRIP_PAD_ON/OFF,
SK_LENERR_OK_ON/OFF, or SK_BIG_PK_OK_ON/OFF */
{
SK_U16 OldRxCmd;
SK_U16 RxCmd;
XM_IN16(IoC, Port, XM_RX_CMD, &OldRxCmd);
RxCmd = OldRxCmd;
switch (Mode & (SK_STRIP_FCS_ON | SK_STRIP_FCS_OFF)) {
case SK_STRIP_FCS_ON:
RxCmd |= XM_RX_STRIP_FCS;
break;
case SK_STRIP_FCS_OFF:
RxCmd &= ~XM_RX_STRIP_FCS;
break;
}
switch (Mode & (SK_STRIP_PAD_ON | SK_STRIP_PAD_OFF)) {
case SK_STRIP_PAD_ON:
RxCmd |= XM_RX_STRIP_PAD;
break;
case SK_STRIP_PAD_OFF:
RxCmd &= ~XM_RX_STRIP_PAD;
break;
}
switch (Mode & (SK_LENERR_OK_ON | SK_LENERR_OK_OFF)) {
case SK_LENERR_OK_ON:
RxCmd |= XM_RX_LENERR_OK;
break;
case SK_LENERR_OK_OFF:
RxCmd &= ~XM_RX_LENERR_OK;
break;
}
switch (Mode & (SK_BIG_PK_OK_ON | SK_BIG_PK_OK_OFF)) {
case SK_BIG_PK_OK_ON:
RxCmd |= XM_RX_BIG_PK_OK;
break;
case SK_BIG_PK_OK_OFF:
RxCmd &= ~XM_RX_BIG_PK_OK;
break;
}
switch (Mode & (SK_SELF_RX_ON | SK_SELF_RX_OFF)) {
case SK_SELF_RX_ON:
RxCmd |= XM_RX_SELF_RX;
break;
case SK_SELF_RX_OFF:
RxCmd &= ~XM_RX_SELF_RX;
break;
}
/* Write the new mode to the Rx command register if required */
if (OldRxCmd != RxCmd) {
XM_OUT16(IoC, Port, XM_RX_CMD, RxCmd);
}
} /* SkXmSetRxCmd */
/******************************************************************************
*
* SkGmSetRxCmd() - Modify the value of the GMAC's Rx Control Register
*
* Description:
* The features
* - FCS (CRC) stripping, SK_STRIP_FCS_ON/OFF
* - don't set GMR_FS_LONG_ERR SK_BIG_PK_OK_ON/OFF
* for frames > 1514 bytes
* - enable Rx of own packets SK_SELF_RX_ON/OFF
*
* for incoming packets may be enabled/disabled by this function.
* Additional modes may be added later.
* Multiple modes can be enabled/disabled at the same time.
* The new configuration is written to the Rx Command register immediately.
*
* Returns:
* nothing
*/
static void SkGmSetRxCmd(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port, /* Port Index (MAC_1 + n) */
int Mode) /* Mode is SK_STRIP_FCS_ON/OFF, SK_STRIP_PAD_ON/OFF,
SK_LENERR_OK_ON/OFF, or SK_BIG_PK_OK_ON/OFF */
{
SK_U16 OldRxCmd;
SK_U16 RxCmd;
if ((Mode & (SK_STRIP_FCS_ON | SK_STRIP_FCS_OFF)) != 0) {
GM_IN16(IoC, Port, GM_RX_CTRL, &OldRxCmd);
RxCmd = OldRxCmd;
if ((Mode & SK_STRIP_FCS_ON) != 0) {
RxCmd |= GM_RXCR_CRC_DIS;
}
else {
RxCmd &= ~GM_RXCR_CRC_DIS;
}
/* Write the new mode to the Rx control register if required */
if (OldRxCmd != RxCmd) {
GM_OUT16(IoC, Port, GM_RX_CTRL, RxCmd);
}
}
if ((Mode & (SK_BIG_PK_OK_ON | SK_BIG_PK_OK_OFF)) != 0) {
GM_IN16(IoC, Port, GM_SERIAL_MODE, &OldRxCmd);
RxCmd = OldRxCmd;
if ((Mode & SK_BIG_PK_OK_ON) != 0) {
RxCmd |= GM_SMOD_JUMBO_ENA;
}
else {
RxCmd &= ~GM_SMOD_JUMBO_ENA;
}
/* Write the new mode to the Rx control register if required */
if (OldRxCmd != RxCmd) {
GM_OUT16(IoC, Port, GM_SERIAL_MODE, RxCmd);
}
}
} /* SkGmSetRxCmd */
/******************************************************************************
*
* SkMacSetRxCmd() - Modify the value of the MAC's Rx Control Register
*
* Description: modifies the MAC's Rx Control reg. dep. on board type
*
* Returns:
* nothing
*/
void SkMacSetRxCmd(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port, /* Port Index (MAC_1 + n) */
int Mode) /* Rx Mode */
{
if (pAC->GIni.GIGenesis) {
SkXmSetRxCmd(pAC, IoC, Port, Mode);
}
else {
SkGmSetRxCmd(pAC, IoC, Port, Mode);
}
} /* SkMacSetRxCmd */
/******************************************************************************
*
* SkMacCrcGener() - Enable / Disable CRC Generation
*
* Description: enables / disables CRC generation dep. on board type
*
* Returns:
* nothing
*/
void SkMacCrcGener(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port, /* Port Index (MAC_1 + n) */
SK_BOOL Enable) /* Enable / Disable */
{
SK_U16 Word;
if (pAC->GIni.GIGenesis) {
XM_IN16(IoC, Port, XM_TX_CMD, &Word);
if (Enable) {
Word &= ~XM_TX_NO_CRC;
}
else {
Word |= XM_TX_NO_CRC;
}
/* setup Tx Command Register */
XM_OUT16(IoC, Port, XM_TX_CMD, Word);
}
else {
GM_IN16(IoC, Port, GM_TX_CTRL, &Word);
if (Enable) {
Word &= ~GM_TXCR_CRC_DIS;
}
else {
Word |= GM_TXCR_CRC_DIS;
}
/* setup Tx Control Register */
GM_OUT16(IoC, Port, GM_TX_CTRL, Word);
}
} /* SkMacCrcGener*/
#endif /* SK_DIAG */
#ifdef GENESIS
/******************************************************************************
*
* SkXmClrExactAddr() - Clear Exact Match Address Registers
*
* Description:
* All Exact Match Address registers of the XMAC 'Port' will be
* cleared starting with 'StartNum' up to (and including) the
* Exact Match address number of 'StopNum'.
*
* Returns:
* nothing
*/
void SkXmClrExactAddr(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port, /* Port Index (MAC_1 + n) */
int StartNum, /* Begin with this Address Register Index (0..15) */
int StopNum) /* Stop after finished with this Register Idx (0..15) */
{
int i;
SK_U16 ZeroAddr[3] = {0x0000, 0x0000, 0x0000};
if ((unsigned)StartNum > 15 || (unsigned)StopNum > 15 ||
StartNum > StopNum) {
SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E001, SKERR_HWI_E001MSG);
return;
}
for (i = StartNum; i <= StopNum; i++) {
XM_OUTADDR(IoC, Port, XM_EXM(i), &ZeroAddr[0]);
}
} /* SkXmClrExactAddr */
#endif /* GENESIS */
/******************************************************************************
*
* SkMacFlushTxFifo() - Flush the MAC's transmit FIFO
*
* Description:
* Flush the transmit FIFO of the MAC specified by the index 'Port'
*
* Returns:
* nothing
*/
void SkMacFlushTxFifo(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port) /* Port Index (MAC_1 + n) */
{
#ifdef GENESIS
SK_U32 MdReg;
if (pAC->GIni.GIGenesis) {
XM_IN32(IoC, Port, XM_MODE, &MdReg);
XM_OUT32(IoC, Port, XM_MODE, MdReg | XM_MD_FTF);
}
#endif /* GENESIS */
#ifdef YUKON
if (pAC->GIni.GIYukon) {
/* no way to flush the FIFO we have to issue a reset */
/* TBD */
}
#endif /* YUKON */
} /* SkMacFlushTxFifo */
/******************************************************************************
*
* SkMacFlushRxFifo() - Flush the MAC's receive FIFO
*
* Description:
* Flush the receive FIFO of the MAC specified by the index 'Port'
*
* Returns:
* nothing
*/
static void SkMacFlushRxFifo(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port) /* Port Index (MAC_1 + n) */
{
#ifdef GENESIS
SK_U32 MdReg;
if (pAC->GIni.GIGenesis) {
XM_IN32(IoC, Port, XM_MODE, &MdReg);
XM_OUT32(IoC, Port, XM_MODE, MdReg | XM_MD_FRF);
}
#endif /* GENESIS */
#ifdef YUKON
if (pAC->GIni.GIYukon) {
/* no way to flush the FIFO we have to issue a reset */
/* TBD */
}
#endif /* YUKON */
} /* SkMacFlushRxFifo */
#ifdef GENESIS
/******************************************************************************
*
* SkXmSoftRst() - Do a XMAC software reset
*
* Description:
* The PHY registers should not be destroyed during this
* kind of software reset. Therefore the XMAC Software Reset
* (XM_GP_RES_MAC bit in XM_GP_PORT) must not be used!
*
* The software reset is done by
* - disabling the Rx and Tx state machine,
* - resetting the statistics module,
* - clear all other significant XMAC Mode,
* Command, and Control Registers
* - clearing the Hash Register and the
* Exact Match Address registers, and
* - flushing the XMAC's Rx and Tx FIFOs.
*
* Note:
* Another requirement when stopping the XMAC is to
* avoid sending corrupted frames on the network.
* Disabling the Tx state machine will NOT interrupt
* the currently transmitted frame. But we must take care
* that the Tx FIFO is cleared AFTER the current frame
* is complete sent to the network.
*
* It takes about 12ns to send a frame with 1538 bytes.
* One PCI clock goes at least 15ns (66MHz). Therefore
* after reading XM_GP_PORT back, we are sure that the
* transmitter is disabled AND idle. And this means
* we may flush the transmit FIFO now.
*
* Returns:
* nothing
*/
static void SkXmSoftRst(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port) /* Port Index (MAC_1 + n) */
{
SK_U16 ZeroAddr[4] = {0x0000, 0x0000, 0x0000, 0x0000};
/* reset the statistics module */
XM_OUT32(IoC, Port, XM_GP_PORT, XM_GP_RES_STAT);
/* disable all XMAC IRQs */
XM_OUT16(IoC, Port, XM_IMSK, 0xffff);
XM_OUT32(IoC, Port, XM_MODE, 0); /* clear Mode Reg */
XM_OUT16(IoC, Port, XM_TX_CMD, 0); /* reset TX CMD Reg */
XM_OUT16(IoC, Port, XM_RX_CMD, 0); /* reset RX CMD Reg */
/* disable all PHY IRQs */
switch (pAC->GIni.GP[Port].PhyType) {
case SK_PHY_BCOM:
SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_INT_MASK, 0xffff);
break;
#ifdef OTHER_PHY
case SK_PHY_LONE:
SkXmPhyWrite(pAC, IoC, Port, PHY_LONE_INT_ENAB, 0);
break;
case SK_PHY_NAT:
/* todo: National
SkXmPhyWrite(pAC, IoC, Port, PHY_NAT_INT_MASK, 0xffff); */
break;
#endif /* OTHER_PHY */
}
/* clear the Hash Register */
XM_OUTHASH(IoC, Port, XM_HSM, &ZeroAddr);
/* clear the Exact Match Address registers */
SkXmClrExactAddr(pAC, IoC, Port, 0, 15);
/* clear the Source Check Address registers */
XM_OUTHASH(IoC, Port, XM_SRC_CHK, &ZeroAddr);
} /* SkXmSoftRst */
/******************************************************************************
*
* SkXmHardRst() - Do a XMAC hardware reset
*
* Description:
* The XMAC of the specified 'Port' and all connected devices
* (PHY and SERDES) will receive a reset signal on its *Reset pins.
* External PHYs must be reset by clearing a bit in the GPIO register
* (Timing requirements: Broadcom: 400ns, Level One: none, National: 80ns).
*
* ATTENTION:
* It is absolutely necessary to reset the SW_RST Bit first
* before calling this function.
*
* Returns:
* nothing
*/
static void SkXmHardRst(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port) /* Port Index (MAC_1 + n) */
{
SK_U32 Reg;
int i;
int TOut;
SK_U16 Word;
for (i = 0; i < 4; i++) {
/* TX_MFF_CTRL1 has 32 bits, but only the lowest 16 bits are used */
SK_OUT16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), MFF_CLR_MAC_RST);
TOut = 0;
do {
if (TOut++ > 10000) {
/*
* Adapter seems to be in RESET state.
* Registers cannot be written.
*/
return;
}
SK_OUT16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), MFF_SET_MAC_RST);
SK_IN16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), &Word);
} while ((Word & MFF_SET_MAC_RST) == 0);
}
/* For external PHYs there must be special handling */
if (pAC->GIni.GP[Port].PhyType != SK_PHY_XMAC) {
SK_IN32(IoC, B2_GP_IO, &Reg);
if (Port == 0) {
Reg |= GP_DIR_0; /* set to output */
Reg &= ~GP_IO_0; /* set PHY reset (active low) */
}
else {
Reg |= GP_DIR_2; /* set to output */
Reg &= ~GP_IO_2; /* set PHY reset (active low) */
}
/* reset external PHY */
SK_OUT32(IoC, B2_GP_IO, Reg);
/* short delay */
SK_IN32(IoC, B2_GP_IO, &Reg);
}
} /* SkXmHardRst */
/******************************************************************************
*
* SkXmClearRst() - Release the PHY & XMAC reset
*
* Description:
*
* Returns:
* nothing
*/
static void SkXmClearRst(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port) /* Port Index (MAC_1 + n) */
{
SK_U32 DWord;
/* clear HW reset */
SK_OUT16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), MFF_CLR_MAC_RST);
if (pAC->GIni.GP[Port].PhyType != SK_PHY_XMAC) {
SK_IN32(IoC, B2_GP_IO, &DWord);
if (Port == 0) {
DWord |= (GP_DIR_0 | GP_IO_0); /* set to output */
}
else {
DWord |= (GP_DIR_2 | GP_IO_2); /* set to output */
}
/* Clear PHY reset */
SK_OUT32(IoC, B2_GP_IO, DWord);
/* Enable GMII interface */
XM_OUT16(IoC, Port, XM_HW_CFG, XM_HW_GMII_MD);
}
} /* SkXmClearRst */
#endif /* GENESIS */
#ifdef YUKON
/******************************************************************************
*
* SkGmSoftRst() - Do a GMAC software reset
*
* Description:
* The GPHY registers should not be destroyed during this
* kind of software reset.
*
* Returns:
* nothing
*/
static void SkGmSoftRst(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port) /* Port Index (MAC_1 + n) */
{
SK_U16 EmptyHash[4] = {0x0000, 0x0000, 0x0000, 0x0000};
SK_U16 RxCtrl;
/* reset the statistics module */
/* disable all GMAC IRQs */
SK_OUT8(IoC, GMAC_IRQ_MSK, 0);
/* disable all PHY IRQs */
SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_INT_MASK, 0);
/* clear the Hash Register */
GM_OUTHASH(IoC, Port, GM_MC_ADDR_H1, EmptyHash);
/* Enable Unicast and Multicast filtering */
GM_IN16(IoC, Port, GM_RX_CTRL, &RxCtrl);
GM_OUT16(IoC, Port, GM_RX_CTRL,
(SK_U16)(RxCtrl | GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA));
} /* SkGmSoftRst */
/******************************************************************************
*
* SkGmHardRst() - Do a GMAC hardware reset
*
* Description:
*
* Returns:
* nothing
*/
static void SkGmHardRst(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port) /* Port Index (MAC_1 + n) */
{
SK_U32 DWord;
/* WA code for COMA mode */
if (pAC->GIni.GIYukonLite &&
pAC->GIni.GIChipRev >= CHIP_REV_YU_LITE_A3) {
SK_IN32(IoC, B2_GP_IO, &DWord);
DWord |= (GP_DIR_9 | GP_IO_9);
/* set PHY reset */
SK_OUT32(IoC, B2_GP_IO, DWord);
}
/* set GPHY Control reset */
SK_OUT32(IoC, MR_ADDR(Port, GPHY_CTRL), GPC_RST_SET);
/* set GMAC Control reset */
SK_OUT32(IoC, MR_ADDR(Port, GMAC_CTRL), GMC_RST_SET);
} /* SkGmHardRst */
/******************************************************************************
*
* SkGmClearRst() - Release the GPHY & GMAC reset
*
* Description:
*
* Returns:
* nothing
*/
static void SkGmClearRst(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port) /* Port Index (MAC_1 + n) */
{
SK_U32 DWord;
#ifdef XXX
/* clear GMAC Control reset */
SK_OUT32(IoC, MR_ADDR(Port, GMAC_CTRL), GMC_RST_CLR);
/* set GMAC Control reset */
SK_OUT32(IoC, MR_ADDR(Port, GMAC_CTRL), GMC_RST_SET);
#endif /* XXX */
/* WA code for COMA mode */
if (pAC->GIni.GIYukonLite &&
pAC->GIni.GIChipRev >= CHIP_REV_YU_LITE_A3) {
SK_IN32(IoC, B2_GP_IO, &DWord);
DWord |= GP_DIR_9; /* set to output */
DWord &= ~GP_IO_9; /* clear PHY reset (active high) */
/* clear PHY reset */
SK_OUT32(IoC, B2_GP_IO, DWord);
}
/* set HWCFG_MODE */
DWord = GPC_INT_POL_HI | GPC_DIS_FC | GPC_DIS_SLEEP |
GPC_ENA_XC | GPC_ANEG_ADV_ALL_M | GPC_ENA_PAUSE |
(pAC->GIni.GICopperType ? GPC_HWCFG_GMII_COP :
GPC_HWCFG_GMII_FIB);
/* set GPHY Control reset */
SK_OUT32(IoC, MR_ADDR(Port, GPHY_CTRL), DWord | GPC_RST_SET);
/* release GPHY Control reset */
SK_OUT32(IoC, MR_ADDR(Port, GPHY_CTRL), DWord | GPC_RST_CLR);
#ifdef VCPU
VCpuWait(9000);
#endif /* VCPU */
/* clear GMAC Control reset */
SK_OUT32(IoC, MR_ADDR(Port, GMAC_CTRL), GMC_PAUSE_ON | GMC_RST_CLR);
#ifdef VCPU
VCpuWait(2000);
SK_IN32(IoC, MR_ADDR(Port, GPHY_CTRL), &DWord);
SK_IN32(IoC, B0_ISRC, &DWord);
#endif /* VCPU */
} /* SkGmClearRst */
#endif /* YUKON */
/******************************************************************************
*
* SkMacSoftRst() - Do a MAC software reset
*
* Description: calls a MAC software reset routine dep. on board type
*
* Returns:
* nothing
*/
void SkMacSoftRst(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port) /* Port Index (MAC_1 + n) */
{
SK_GEPORT *pPrt;
pPrt = &pAC->GIni.GP[Port];
/* disable receiver and transmitter */
SkMacRxTxDisable(pAC, IoC, Port);
#ifdef GENESIS
if (pAC->GIni.GIGenesis) {
SkXmSoftRst(pAC, IoC, Port);
}
#endif /* GENESIS */
#ifdef YUKON
if (pAC->GIni.GIYukon) {
SkGmSoftRst(pAC, IoC, Port);
}
#endif /* YUKON */
/* flush the MAC's Rx and Tx FIFOs */
SkMacFlushTxFifo(pAC, IoC, Port);
SkMacFlushRxFifo(pAC, IoC, Port);
pPrt->PState = SK_PRT_STOP;
} /* SkMacSoftRst */
/******************************************************************************
*
* SkMacHardRst() - Do a MAC hardware reset
*
* Description: calls a MAC hardware reset routine dep. on board type
*
* Returns:
* nothing
*/
void SkMacHardRst(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port) /* Port Index (MAC_1 + n) */
{
#ifdef GENESIS
if (pAC->GIni.GIGenesis) {
SkXmHardRst(pAC, IoC, Port);
}
#endif /* GENESIS */
#ifdef YUKON
if (pAC->GIni.GIYukon) {
SkGmHardRst(pAC, IoC, Port);
}
#endif /* YUKON */
pAC->GIni.GP[Port].PState = SK_PRT_RESET;
} /* SkMacHardRst */
#ifdef GENESIS
/******************************************************************************
*
* SkXmInitMac() - Initialize the XMAC II
*
* Description:
* Initialize the XMAC of the specified port.
* The XMAC must be reset or stopped before calling this function.
*
* Note:
* The XMAC's Rx and Tx state machine is still disabled when returning.
*
* Returns:
* nothing
*/
void SkXmInitMac(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port) /* Port Index (MAC_1 + n) */
{
SK_GEPORT *pPrt;
int i;
SK_U16 SWord;
pPrt = &pAC->GIni.GP[Port];
if (pPrt->PState == SK_PRT_STOP) {
/* Port State: SK_PRT_STOP */
/* Verify that the reset bit is cleared */
SK_IN16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), &SWord);
if ((SWord & MFF_SET_MAC_RST) != 0) {
/* PState does not match HW state */
SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E006, SKERR_HWI_E006MSG);
/* Correct it */
pPrt->PState = SK_PRT_RESET;
}
}
if (pPrt->PState == SK_PRT_RESET) {
SkXmClearRst(pAC, IoC, Port);
if (pPrt->PhyType != SK_PHY_XMAC) {
/* read Id from external PHY (all have the same address) */
SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_ID1, &pPrt->PhyId1);
/*
* Optimize MDIO transfer by suppressing preamble.
* Must be done AFTER first access to BCOM chip.
*/
XM_IN16(IoC, Port, XM_MMU_CMD, &SWord);
XM_OUT16(IoC, Port, XM_MMU_CMD, SWord | XM_MMU_NO_PRE);
if (pPrt->PhyId1 == PHY_BCOM_ID1_C0) {
/*
* Workaround BCOM Errata for the C0 type.
* Write magic patterns to reserved registers.
*/
i = 0;
while (BcomRegC0Hack[i].PhyReg != 0) {
SkXmPhyWrite(pAC, IoC, Port, BcomRegC0Hack[i].PhyReg,
BcomRegC0Hack[i].PhyVal);
i++;
}
}
else if (pPrt->PhyId1 == PHY_BCOM_ID1_A1) {
/*
* Workaround BCOM Errata for the A1 type.
* Write magic patterns to reserved registers.
*/
i = 0;
while (BcomRegA1Hack[i].PhyReg != 0) {
SkXmPhyWrite(pAC, IoC, Port, BcomRegA1Hack[i].PhyReg,
BcomRegA1Hack[i].PhyVal);
i++;
}
}
/*
* Workaround BCOM Errata (#10523) for all BCom PHYs.
* Disable Power Management after reset.
*/
SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, &SWord);
SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_AUX_CTRL,
(SK_U16)(SWord | PHY_B_AC_DIS_PM));
/* PHY LED initialization is done in SkGeXmitLED() */
}
/* Dummy read the Interrupt source register */
XM_IN16(IoC, Port, XM_ISRC, &SWord);
/*
* The auto-negotiation process starts immediately after
* clearing the reset. The auto-negotiation process should be
* started by the SIRQ, therefore stop it here immediately.
*/
SkMacInitPhy(pAC, IoC, Port, SK_FALSE);
#ifdef TEST_ONLY
/* temp. code: enable signal detect */
/* WARNING: do not override GMII setting above */
XM_OUT16(IoC, Port, XM_HW_CFG, XM_HW_COM4SIG);
#endif
}
/*
* configure the XMACs Station Address
* B2_MAC_2 = xx xx xx xx xx x1 is programmed to XMAC A
* B2_MAC_3 = xx xx xx xx xx x2 is programmed to XMAC B
*/
for (i = 0; i < 3; i++) {
/*
* The following 2 statements are together endianess
* independent. Remember this when changing.
*/
SK_IN16(IoC, (B2_MAC_2 + Port * 8 + i * 2), &SWord);
XM_OUT16(IoC, Port, (XM_SA + i * 2), SWord);
}
/* Tx Inter Packet Gap (XM_TX_IPG): use default */
/* Tx High Water Mark (XM_TX_HI_WM): use default */
/* Tx Low Water Mark (XM_TX_LO_WM): use default */
/* Host Request Threshold (XM_HT_THR): use default */
/* Rx Request Threshold (XM_RX_THR): use default */
/* Rx Low Water Mark (XM_RX_LO_WM): use default */
/* configure Rx High Water Mark (XM_RX_HI_WM) */
XM_OUT16(IoC, Port, XM_RX_HI_WM, SK_XM_RX_HI_WM);
/* Configure Tx Request Threshold */
SWord = SK_XM_THR_SL; /* for single port */
if (pAC->GIni.GIMacsFound > 1) {
switch (pAC->GIni.GIPortUsage) {
case SK_RED_LINK:
SWord = SK_XM_THR_REDL; /* redundant link */
break;
case SK_MUL_LINK:
SWord = SK_XM_THR_MULL; /* load balancing */
break;
case SK_JUMBO_LINK:
SWord = SK_XM_THR_JUMBO; /* jumbo frames */
break;
default:
SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E014, SKERR_HWI_E014MSG);
break;
}
}
XM_OUT16(IoC, Port, XM_TX_THR, SWord);
/* setup register defaults for the Tx Command Register */
XM_OUT16(IoC, Port, XM_TX_CMD, XM_TX_AUTO_PAD);
/* setup register defaults for the Rx Command Register */
SWord = XM_RX_STRIP_FCS | XM_RX_LENERR_OK;
if (pAC->GIni.GIPortUsage == SK_JUMBO_LINK) {
SWord |= XM_RX_BIG_PK_OK;
}
if (pPrt->PLinkMode == SK_LMODE_HALF) {
/*
* If in manual half duplex mode the other side might be in
* full duplex mode, so ignore if a carrier extension is not seen
* on frames received
*/
SWord |= XM_RX_DIS_CEXT;
}
XM_OUT16(IoC, Port, XM_RX_CMD, SWord);
/*
* setup register defaults for the Mode Register
* - Don't strip error frames to avoid Store & Forward
* on the Rx side.
* - Enable 'Check Station Address' bit
* - Enable 'Check Address Array' bit
*/
XM_OUT32(IoC, Port, XM_MODE, XM_DEF_MODE);
/*
* Initialize the Receive Counter Event Mask (XM_RX_EV_MSK)
* - Enable all bits excepting 'Octets Rx OK Low CntOv'
* and 'Octets Rx OK Hi Cnt Ov'.
*/
XM_OUT32(IoC, Port, XM_RX_EV_MSK, XMR_DEF_MSK);
/*
* Initialize the Transmit Counter Event Mask (XM_TX_EV_MSK)
* - Enable all bits excepting 'Octets Tx OK Low CntOv'
* and 'Octets Tx OK Hi Cnt Ov'.
*/
XM_OUT32(IoC, Port, XM_TX_EV_MSK, XMT_DEF_MSK);
/*
* Do NOT init XMAC interrupt mask here.
* All interrupts remain disable until link comes up!
*/
/*
* Any additional configuration changes may be done now.
* The last action is to enable the Rx and Tx state machine.
* This should be done after the auto-negotiation process
* has been completed successfully.
*/
} /* SkXmInitMac */
#endif /* GENESIS */
#ifdef YUKON
/******************************************************************************
*
* SkGmInitMac() - Initialize the GMAC
*
* Description:
* Initialize the GMAC of the specified port.
* The GMAC must be reset or stopped before calling this function.
*
* Note:
* The GMAC's Rx and Tx state machine is still disabled when returning.
*
* Returns:
* nothing
*/
void SkGmInitMac(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port) /* Port Index (MAC_1 + n) */
{
SK_GEPORT *pPrt;
int i;
SK_U16 SWord;
SK_U32 DWord;
pPrt = &pAC->GIni.GP[Port];
if (pPrt->PState == SK_PRT_STOP) {
/* Port State: SK_PRT_STOP */
/* Verify that the reset bit is cleared */
SK_IN32(IoC, MR_ADDR(Port, GMAC_CTRL), &DWord);
if ((DWord & GMC_RST_SET) != 0) {
/* PState does not match HW state */
SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E006, SKERR_HWI_E006MSG);
/* Correct it */
pPrt->PState = SK_PRT_RESET;
}
}
if (pPrt->PState == SK_PRT_RESET) {
SkGmHardRst(pAC, IoC, Port);
SkGmClearRst(pAC, IoC, Port);
/* Auto-negotiation ? */
if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) {
/* Auto-negotiation disabled */
/* get General Purpose Control */
GM_IN16(IoC, Port, GM_GP_CTRL, &SWord);
/* disable auto-update for speed, duplex and flow-control */
SWord |= GM_GPCR_AU_ALL_DIS;
/* setup General Purpose Control Register */
GM_OUT16(IoC, Port, GM_GP_CTRL, SWord);
SWord = GM_GPCR_AU_ALL_DIS;
}
else {
SWord = 0;
}
/* speed settings */
switch (pPrt->PLinkSpeed) {
case SK_LSPEED_AUTO:
case SK_LSPEED_1000MBPS:
SWord |= GM_GPCR_SPEED_1000 | GM_GPCR_SPEED_100;
break;
case SK_LSPEED_100MBPS:
SWord |= GM_GPCR_SPEED_100;
break;
case SK_LSPEED_10MBPS:
break;
}
/* duplex settings */
if (pPrt->PLinkMode != SK_LMODE_HALF) {
/* set full duplex */
SWord |= GM_GPCR_DUP_FULL;
}
/* flow-control settings */
switch (pPrt->PFlowCtrlMode) {
case SK_FLOW_MODE_NONE:
/* set Pause Off */
SK_OUT32(IoC, MR_ADDR(Port, GMAC_CTRL), GMC_PAUSE_OFF);
/* disable Tx & Rx flow-control */
SWord |= GM_GPCR_FC_TX_DIS | GM_GPCR_FC_RX_DIS | GM_GPCR_AU_FCT_DIS;
break;
case SK_FLOW_MODE_LOC_SEND:
/* disable Rx flow-control */
SWord |= GM_GPCR_FC_RX_DIS | GM_GPCR_AU_FCT_DIS;
break;
case SK_FLOW_MODE_SYMMETRIC:
case SK_FLOW_MODE_SYM_OR_REM:
/* enable Tx & Rx flow-control */
break;
}
/* setup General Purpose Control Register */
GM_OUT16(IoC, Port, GM_GP_CTRL, SWord);
/* dummy read the Interrupt Source Register */
SK_IN16(IoC, GMAC_IRQ_SRC, &SWord);
#ifndef VCPU
/* read Id from PHY */
SkGmPhyRead(pAC, IoC, Port, PHY_MARV_ID1, &pPrt->PhyId1);
SkGmInitPhyMarv(pAC, IoC, Port, SK_FALSE);
#endif /* VCPU */
}
(void)SkGmResetCounter(pAC, IoC, Port);
/* setup Transmit Control Register */
GM_OUT16(IoC, Port, GM_TX_CTRL, TX_COL_THR(pPrt->PMacColThres));
/* setup Receive Control Register */
GM_OUT16(IoC, Port, GM_RX_CTRL, GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA |
GM_RXCR_CRC_DIS);
/* setup Transmit Flow Control Register */
GM_OUT16(IoC, Port, GM_TX_FLOW_CTRL, 0xffff);
/* setup Transmit Parameter Register */
#ifdef VCPU
GM_IN16(IoC, Port, GM_TX_PARAM, &SWord);
#endif /* VCPU */
SWord = TX_JAM_LEN_VAL(pPrt->PMacJamLen) |
TX_JAM_IPG_VAL(pPrt->PMacJamIpgVal) |
TX_IPG_JAM_DATA(pPrt->PMacJamIpgData);
GM_OUT16(IoC, Port, GM_TX_PARAM, SWord);
/* configure the Serial Mode Register */
#ifdef VCPU
GM_IN16(IoC, Port, GM_SERIAL_MODE, &SWord);
#endif /* VCPU */
SWord = GM_SMOD_VLAN_ENA | IPG_DATA_VAL(pPrt->PMacIpgData);
if (pPrt->PMacLimit4) {
/* reset of collision counter after 4 consecutive collisions */
SWord |= GM_SMOD_LIMIT_4;
}
if (pAC->GIni.GIPortUsage == SK_JUMBO_LINK) {
/* enable jumbo mode (Max. Frame Length = 9018) */
SWord |= GM_SMOD_JUMBO_ENA;
}
GM_OUT16(IoC, Port, GM_SERIAL_MODE, SWord);
/*
* configure the GMACs Station Addresses
* in PROM you can find our addresses at:
* B2_MAC_1 = xx xx xx xx xx x0 virtual address
* B2_MAC_2 = xx xx xx xx xx x1 is programmed to GMAC A
* B2_MAC_3 = xx xx xx xx xx x2 is reserved for DualPort
*/
for (i = 0; i < 3; i++) {
/*
* The following 2 statements are together endianess
* independent. Remember this when changing.
*/
/* physical address: will be used for pause frames */
SK_IN16(IoC, (B2_MAC_2 + Port * 8 + i * 2), &SWord);
#ifdef WA_DEV_16
/* WA for deviation #16 */
if (pAC->GIni.GIChipId == CHIP_ID_YUKON && pAC->GIni.GIChipRev == 0) {
/* swap the address bytes */
SWord = ((SWord & 0xff00) >> 8) | ((SWord & 0x00ff) << 8);
/* write to register in reversed order */
GM_OUT16(IoC, Port, (GM_SRC_ADDR_1L + (2 - i) * 4), SWord);
}
else {
GM_OUT16(IoC, Port, (GM_SRC_ADDR_1L + i * 4), SWord);
}
#else
GM_OUT16(IoC, Port, (GM_SRC_ADDR_1L + i * 4), SWord);
#endif /* WA_DEV_16 */
/* virtual address: will be used for data */
SK_IN16(IoC, (B2_MAC_1 + Port * 8 + i * 2), &SWord);
GM_OUT16(IoC, Port, (GM_SRC_ADDR_2L + i * 4), SWord);
/* reset Multicast filtering Hash registers 1-3 */
GM_OUT16(IoC, Port, GM_MC_ADDR_H1 + 4*i, 0);
}
/* reset Multicast filtering Hash register 4 */
GM_OUT16(IoC, Port, GM_MC_ADDR_H4, 0);
/* enable interrupt mask for counter overflows */
GM_OUT16(IoC, Port, GM_TX_IRQ_MSK, 0);
GM_OUT16(IoC, Port, GM_RX_IRQ_MSK, 0);
GM_OUT16(IoC, Port, GM_TR_IRQ_MSK, 0);
#if defined(SK_DIAG) || defined(DEBUG)
/* read General Purpose Status */
GM_IN16(IoC, Port, GM_GP_STAT, &SWord);
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
("MAC Stat Reg.=0x%04X\n", SWord));
#endif /* SK_DIAG || DEBUG */
#ifdef SK_DIAG
c_print("MAC Stat Reg=0x%04X\n", SWord);
#endif /* SK_DIAG */
} /* SkGmInitMac */
#endif /* YUKON */
#ifdef GENESIS
/******************************************************************************
*
* SkXmInitDupMd() - Initialize the XMACs Duplex Mode
*
* Description:
* This function initializes the XMACs Duplex Mode.
* It should be called after successfully finishing
* the Auto-negotiation Process
*
* Returns:
* nothing
*/
static void SkXmInitDupMd(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port) /* Port Index (MAC_1 + n) */
{
switch (pAC->GIni.GP[Port].PLinkModeStatus) {
case SK_LMODE_STAT_AUTOHALF:
case SK_LMODE_STAT_HALF:
/* Configuration Actions for Half Duplex Mode */
/*
* XM_BURST = default value. We are probable not quick
* enough at the 'XMAC' bus to burst 8kB.
* The XMAC stops bursting if no transmit frames
* are available or the burst limit is exceeded.
*/
/* XM_TX_RT_LIM = default value (15) */
/* XM_TX_STIME = default value (0xff = 4096 bit times) */
break;
case SK_LMODE_STAT_AUTOFULL:
case SK_LMODE_STAT_FULL:
/* Configuration Actions for Full Duplex Mode */
/*
* The duplex mode is configured by the PHY,
* therefore it seems to be that there is nothing
* to do here.
*/
break;
case SK_LMODE_STAT_UNKNOWN:
default:
SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E007, SKERR_HWI_E007MSG);
break;
}
} /* SkXmInitDupMd */
/******************************************************************************
*
* SkXmInitPauseMd() - initialize the Pause Mode to be used for this port
*
* Description:
* This function initializes the Pause Mode which should
* be used for this port.
* It should be called after successfully finishing
* the Auto-negotiation Process
*
* Returns:
* nothing
*/
static void SkXmInitPauseMd(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port) /* Port Index (MAC_1 + n) */
{
SK_GEPORT *pPrt;
SK_U32 DWord;
SK_U16 Word;
pPrt = &pAC->GIni.GP[Port];
XM_IN16(IoC, Port, XM_MMU_CMD, &Word);
if (pPrt->PFlowCtrlStatus == SK_FLOW_STAT_NONE ||
pPrt->PFlowCtrlStatus == SK_FLOW_STAT_LOC_SEND) {
/* Disable Pause Frame Reception */
Word |= XM_MMU_IGN_PF;
}
else {
/*
* enabling pause frame reception is required for 1000BT
* because the XMAC is not reset if the link is going down
*/
/* Enable Pause Frame Reception */
Word &= ~XM_MMU_IGN_PF;
}
XM_OUT16(IoC, Port, XM_MMU_CMD, Word);
XM_IN32(IoC, Port, XM_MODE, &DWord);
if (pPrt->PFlowCtrlStatus == SK_FLOW_STAT_SYMMETRIC ||
pPrt->PFlowCtrlStatus == SK_FLOW_STAT_LOC_SEND) {
/*
* Configure Pause Frame Generation
* Use internal and external Pause Frame Generation.
* Sending pause frames is edge triggered.
* Send a Pause frame with the maximum pause time if
* internal oder external FIFO full condition occurs.
* Send a zero pause time frame to re-start transmission.
*/
/* XM_PAUSE_DA = '010000C28001' (default) */
/* XM_MAC_PTIME = 0xffff (maximum) */
/* remember this value is defined in big endian (!) */
XM_OUT16(IoC, Port, XM_MAC_PTIME, 0xffff);
/* Set Pause Mode in Mode Register */
DWord |= XM_PAUSE_MODE;
/* Set Pause Mode in MAC Rx FIFO */
SK_OUT16(IoC, MR_ADDR(Port, RX_MFF_CTRL1), MFF_ENA_PAUSE);
}
else {
/*
* disable pause frame generation is required for 1000BT
* because the XMAC is not reset if the link is going down
*/
/* Disable Pause Mode in Mode Register */
DWord &= ~XM_PAUSE_MODE;
/* Disable Pause Mode in MAC Rx FIFO */
SK_OUT16(IoC, MR_ADDR(Port, RX_MFF_CTRL1), MFF_DIS_PAUSE);
}
XM_OUT32(IoC, Port, XM_MODE, DWord);
} /* SkXmInitPauseMd*/
/******************************************************************************
*
* SkXmInitPhyXmac() - Initialize the XMAC Phy registers
*
* Description: initializes all the XMACs Phy registers
*
* Note:
*
* Returns:
* nothing
*/
static void SkXmInitPhyXmac(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port, /* Port Index (MAC_1 + n) */
SK_BOOL DoLoop) /* Should a Phy LoopBack be set-up? */
{
SK_GEPORT *pPrt;
SK_U16 Ctrl;
pPrt = &pAC->GIni.GP[Port];
Ctrl = 0;
/* Auto-negotiation ? */
if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) {
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
("InitPhyXmac: no auto-negotiation Port %d\n", Port));
/* Set DuplexMode in Config register */
if (pPrt->PLinkMode == SK_LMODE_FULL) {
Ctrl |= PHY_CT_DUP_MD;
}
/*
* Do NOT enable Auto-negotiation here. This would hold
* the link down because no IDLEs are transmitted
*/
}
else {
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
("InitPhyXmac: with auto-negotiation Port %d\n", Port));
/* Set Auto-negotiation advertisement */
/* Set Full/half duplex capabilities */
switch (pPrt->PLinkMode) {
case SK_LMODE_AUTOHALF:
Ctrl |= PHY_X_AN_HD;
break;
case SK_LMODE_AUTOFULL:
Ctrl |= PHY_X_AN_FD;
break;
case SK_LMODE_AUTOBOTH:
Ctrl |= PHY_X_AN_FD | PHY_X_AN_HD;
break;
default:
SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E015,
SKERR_HWI_E015MSG);
}
/* Set Flow-control capabilities */
switch (pPrt->PFlowCtrlMode) {
case SK_FLOW_MODE_NONE:
Ctrl |= PHY_X_P_NO_PAUSE;
break;
case SK_FLOW_MODE_LOC_SEND:
Ctrl |= PHY_X_P_ASYM_MD;
break;
case SK_FLOW_MODE_SYMMETRIC:
Ctrl |= PHY_X_P_SYM_MD;
break;
case SK_FLOW_MODE_SYM_OR_REM:
Ctrl |= PHY_X_P_BOTH_MD;
break;
default:
SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E016,
SKERR_HWI_E016MSG);
}
/* Write AutoNeg Advertisement Register */
SkXmPhyWrite(pAC, IoC, Port, PHY_XMAC_AUNE_ADV, Ctrl);
/* Restart Auto-negotiation */
Ctrl = PHY_CT_ANE | PHY_CT_RE_CFG;
}
if (DoLoop) {
/* Set the Phy Loopback bit, too */
Ctrl |= PHY_CT_LOOP;
}
/* Write to the Phy control register */
SkXmPhyWrite(pAC, IoC, Port, PHY_XMAC_CTRL, Ctrl);
} /* SkXmInitPhyXmac */
/******************************************************************************
*
* SkXmInitPhyBcom() - Initialize the Broadcom Phy registers
*
* Description: initializes all the Broadcom Phy registers
*
* Note:
*
* Returns:
* nothing
*/
static void SkXmInitPhyBcom(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port, /* Port Index (MAC_1 + n) */
SK_BOOL DoLoop) /* Should a Phy LoopBack be set-up? */
{
SK_GEPORT *pPrt;
SK_U16 Ctrl1;
SK_U16 Ctrl2;
SK_U16 Ctrl3;
SK_U16 Ctrl4;
SK_U16 Ctrl5;
Ctrl1 = PHY_CT_SP1000;
Ctrl2 = 0;
Ctrl3 = PHY_SEL_TYPE;
Ctrl4 = PHY_B_PEC_EN_LTR;
Ctrl5 = PHY_B_AC_TX_TST;
pPrt = &pAC->GIni.GP[Port];
/* manually Master/Slave ? */
if (pPrt->PMSMode != SK_MS_MODE_AUTO) {
Ctrl2 |= PHY_B_1000C_MSE;
if (pPrt->PMSMode == SK_MS_MODE_MASTER) {
Ctrl2 |= PHY_B_1000C_MSC;
}
}
/* Auto-negotiation ? */
if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) {
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
("InitPhyBcom: no auto-negotiation Port %d\n", Port));
/* Set DuplexMode in Config register */
if (pPrt->PLinkMode == SK_LMODE_FULL) {
Ctrl1 |= PHY_CT_DUP_MD;
}
/* Determine Master/Slave manually if not already done */
if (pPrt->PMSMode == SK_MS_MODE_AUTO) {
Ctrl2 |= PHY_B_1000C_MSE; /* set it to Slave */
}
/*
* Do NOT enable Auto-negotiation here. This would hold
* the link down because no IDLES are transmitted
*/
}
else {
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
("InitPhyBcom: with auto-negotiation Port %d\n", Port));
/* Set Auto-negotiation advertisement */
/*
* Workaround BCOM Errata #1 for the C5 type.
* 1000Base-T Link Acquisition Failure in Slave Mode
* Set Repeater/DTE bit 10 of the 1000Base-T Control Register
*/
Ctrl2 |= PHY_B_1000C_RD;
/* Set Full/half duplex capabilities */
switch (pPrt->PLinkMode) {
case SK_LMODE_AUTOHALF:
Ctrl2 |= PHY_B_1000C_AHD;
break;
case SK_LMODE_AUTOFULL:
Ctrl2 |= PHY_B_1000C_AFD;
break;
case SK_LMODE_AUTOBOTH:
Ctrl2 |= PHY_B_1000C_AFD | PHY_B_1000C_AHD;
break;
default:
SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E015,
SKERR_HWI_E015MSG);
}
/* Set Flow-control capabilities */
switch (pPrt->PFlowCtrlMode) {
case SK_FLOW_MODE_NONE:
Ctrl3 |= PHY_B_P_NO_PAUSE;
break;
case SK_FLOW_MODE_LOC_SEND:
Ctrl3 |= PHY_B_P_ASYM_MD;
break;
case SK_FLOW_MODE_SYMMETRIC:
Ctrl3 |= PHY_B_P_SYM_MD;
break;
case SK_FLOW_MODE_SYM_OR_REM:
Ctrl3 |= PHY_B_P_BOTH_MD;
break;
default:
SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E016,
SKERR_HWI_E016MSG);
}
/* Restart Auto-negotiation */
Ctrl1 |= PHY_CT_ANE | PHY_CT_RE_CFG;
}
/* Initialize LED register here? */
/* No. Please do it in SkDgXmitLed() (if required) and swap
init order of LEDs and XMAC. (MAl) */
/* Write 1000Base-T Control Register */
SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_1000T_CTRL, Ctrl2);
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
("Set 1000B-T Ctrl Reg=0x%04X\n", Ctrl2));
/* Write AutoNeg Advertisement Register */
SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_AUNE_ADV, Ctrl3);
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
("Set Auto-Neg.Adv.Reg=0x%04X\n", Ctrl3));
if (DoLoop) {
/* Set the Phy Loopback bit, too */
Ctrl1 |= PHY_CT_LOOP;
}
if (pAC->GIni.GIPortUsage == SK_JUMBO_LINK) {
/* configure FIFO to high latency for transmission of ext. packets */
Ctrl4 |= PHY_B_PEC_HIGH_LA;
/* configure reception of extended packets */
Ctrl5 |= PHY_B_AC_LONG_PACK;
SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, Ctrl5);
}
/* Configure LED Traffic Mode and Jumbo Frame usage if specified */
SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_P_EXT_CTRL, Ctrl4);
/* Write to the Phy control register */
SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_CTRL, Ctrl1);
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
("PHY Control Reg=0x%04X\n", Ctrl1));
} /* SkXmInitPhyBcom */
#endif /* GENESIS */
#ifdef YUKON
/******************************************************************************
*
* SkGmInitPhyMarv() - Initialize the Marvell Phy registers
*
* Description: initializes all the Marvell Phy registers
*
* Note:
*
* Returns:
* nothing
*/
static void SkGmInitPhyMarv(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port, /* Port Index (MAC_1 + n) */
SK_BOOL DoLoop) /* Should a Phy LoopBack be set-up? */
{
SK_GEPORT *pPrt;
SK_U16 PhyCtrl;
SK_U16 C1000BaseT;
SK_U16 AutoNegAdv;
SK_U16 ExtPhyCtrl;
SK_U16 LedCtrl;
SK_BOOL AutoNeg;
#if defined(SK_DIAG) || defined(DEBUG)
SK_U16 PhyStat;
SK_U16 PhyStat1;
SK_U16 PhySpecStat;
#endif /* SK_DIAG || DEBUG */
pPrt = &pAC->GIni.GP[Port];
/* Auto-negotiation ? */
if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) {
AutoNeg = SK_FALSE;
}
else {
AutoNeg = SK_TRUE;
}
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
("InitPhyMarv: Port %d, auto-negotiation %s\n",
Port, AutoNeg ? "ON" : "OFF"));
#ifdef VCPU
VCPUprintf(0, "SkGmInitPhyMarv(), Port=%u, DoLoop=%u\n",
Port, DoLoop);
#else /* VCPU */
if (DoLoop) {
/* Set 'MAC Power up'-bit, set Manual MDI configuration */
SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_PHY_CTRL,
PHY_M_PC_MAC_POW_UP);
}
else if (AutoNeg && pPrt->PLinkSpeed == SK_LSPEED_AUTO) {
/* Read Ext. PHY Specific Control */
SkGmPhyRead(pAC, IoC, Port, PHY_MARV_EXT_CTRL, &ExtPhyCtrl);
ExtPhyCtrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK |
PHY_M_EC_MAC_S_MSK);
ExtPhyCtrl |= PHY_M_EC_MAC_S(MAC_TX_CLK_25_MHZ) |
PHY_M_EC_M_DSC(0) | PHY_M_EC_S_DSC(1);
SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_EXT_CTRL, ExtPhyCtrl);
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
("Set Ext. PHY Ctrl=0x%04X\n", ExtPhyCtrl));
}
/* Read PHY Control */
SkGmPhyRead(pAC, IoC, Port, PHY_MARV_CTRL, &PhyCtrl);
if (!AutoNeg) {
/* Disable Auto-negotiation */
PhyCtrl &= ~PHY_CT_ANE;
}
PhyCtrl |= PHY_CT_RESET;
/* Assert software reset */
SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_CTRL, PhyCtrl);
#endif /* VCPU */
PhyCtrl = 0 /* PHY_CT_COL_TST */;
C1000BaseT = 0;
AutoNegAdv = PHY_SEL_TYPE;
/* manually Master/Slave ? */
if (pPrt->PMSMode != SK_MS_MODE_AUTO) {
/* enable Manual Master/Slave */
C1000BaseT |= PHY_M_1000C_MSE;
if (pPrt->PMSMode == SK_MS_MODE_MASTER) {
C1000BaseT |= PHY_M_1000C_MSC; /* set it to Master */
}
}
/* Auto-negotiation ? */
if (!AutoNeg) {
if (pPrt->PLinkMode == SK_LMODE_FULL) {
/* Set Full Duplex Mode */
PhyCtrl |= PHY_CT_DUP_MD;
}
/* Set Master/Slave manually if not already done */
if (pPrt->PMSMode == SK_MS_MODE_AUTO) {
C1000BaseT |= PHY_M_1000C_MSE; /* set it to Slave */
}
/* Set Speed */
switch (pPrt->PLinkSpeed) {
case SK_LSPEED_AUTO:
case SK_LSPEED_1000MBPS:
PhyCtrl |= PHY_CT_SP1000;
break;
case SK_LSPEED_100MBPS:
PhyCtrl |= PHY_CT_SP100;
break;
case SK_LSPEED_10MBPS:
break;
default:
SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E019,
SKERR_HWI_E019MSG);
}
if (!DoLoop) {
PhyCtrl |= PHY_CT_RESET;
}
}
else {
/* Set Auto-negotiation advertisement */
if (pAC->GIni.GICopperType) {
/* Set Speed capabilities */
switch (pPrt->PLinkSpeed) {
case SK_LSPEED_AUTO:
C1000BaseT |= PHY_M_1000C_AHD | PHY_M_1000C_AFD;
AutoNegAdv |= PHY_M_AN_100_FD | PHY_M_AN_100_HD |
PHY_M_AN_10_FD | PHY_M_AN_10_HD;
break;
case SK_LSPEED_1000MBPS:
C1000BaseT |= PHY_M_1000C_AHD | PHY_M_1000C_AFD;
break;
case SK_LSPEED_100MBPS:
AutoNegAdv |= PHY_M_AN_100_FD | PHY_M_AN_100_HD |
/* advertise 10Base-T also */
PHY_M_AN_10_FD | PHY_M_AN_10_HD;
break;
case SK_LSPEED_10MBPS:
AutoNegAdv |= PHY_M_AN_10_FD | PHY_M_AN_10_HD;
break;
default:
SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E019,
SKERR_HWI_E019MSG);
}
/* Set Full/half duplex capabilities */
switch (pPrt->PLinkMode) {
case SK_LMODE_AUTOHALF:
C1000BaseT &= ~PHY_M_1000C_AFD;
AutoNegAdv &= ~(PHY_M_AN_100_FD | PHY_M_AN_10_FD);
break;
case SK_LMODE_AUTOFULL:
C1000BaseT &= ~PHY_M_1000C_AHD;
AutoNegAdv &= ~(PHY_M_AN_100_HD | PHY_M_AN_10_HD);
break;
case SK_LMODE_AUTOBOTH:
break;
default:
SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E015,
SKERR_HWI_E015MSG);
}
/* Set Flow-control capabilities */
switch (pPrt->PFlowCtrlMode) {
case SK_FLOW_MODE_NONE:
AutoNegAdv |= PHY_B_P_NO_PAUSE;
break;
case SK_FLOW_MODE_LOC_SEND:
AutoNegAdv |= PHY_B_P_ASYM_MD;
break;
case SK_FLOW_MODE_SYMMETRIC:
AutoNegAdv |= PHY_B_P_SYM_MD;
break;
case SK_FLOW_MODE_SYM_OR_REM:
AutoNegAdv |= PHY_B_P_BOTH_MD;
break;
default:
SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E016,
SKERR_HWI_E016MSG);
}
}
else { /* special defines for FIBER (88E1011S only) */
/* Set Full/half duplex capabilities */
switch (pPrt->PLinkMode) {
case SK_LMODE_AUTOHALF:
AutoNegAdv |= PHY_M_AN_1000X_AHD;
break;
case SK_LMODE_AUTOFULL:
AutoNegAdv |= PHY_M_AN_1000X_AFD;
break;
case SK_LMODE_AUTOBOTH:
AutoNegAdv |= PHY_M_AN_1000X_AHD | PHY_M_AN_1000X_AFD;
break;
default:
SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E015,
SKERR_HWI_E015MSG);
}
/* Set Flow-control capabilities */
switch (pPrt->PFlowCtrlMode) {
case SK_FLOW_MODE_NONE:
AutoNegAdv |= PHY_M_P_NO_PAUSE_X;
break;
case SK_FLOW_MODE_LOC_SEND:
AutoNegAdv |= PHY_M_P_ASYM_MD_X;
break;
case SK_FLOW_MODE_SYMMETRIC:
AutoNegAdv |= PHY_M_P_SYM_MD_X;
break;
case SK_FLOW_MODE_SYM_OR_REM:
AutoNegAdv |= PHY_M_P_BOTH_MD_X;
break;
default:
SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E016,
SKERR_HWI_E016MSG);
}
}
if (!DoLoop) {
/* Restart Auto-negotiation */
PhyCtrl |= PHY_CT_ANE | PHY_CT_RE_CFG;
}
}
#ifdef VCPU
/*
* E-mail from Gu Lin (08-03-2002):
*/
/* Program PHY register 30 as 16'h0708 for simulation speed up */
SkGmPhyWrite(pAC, IoC, Port, 30, 0x0700 /* 0x0708 */);
VCpuWait(2000);
#else /* VCPU */
/* Write 1000Base-T Control Register */
SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_1000T_CTRL, C1000BaseT);
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
("Set 1000B-T Ctrl =0x%04X\n", C1000BaseT));
/* Write AutoNeg Advertisement Register */
SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_AUNE_ADV, AutoNegAdv);
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
("Set Auto-Neg.Adv.=0x%04X\n", AutoNegAdv));
#endif /* VCPU */
if (DoLoop) {
/* Set the PHY Loopback bit */
PhyCtrl |= PHY_CT_LOOP;
#ifdef XXX
/* Program PHY register 16 as 16'h0400 to force link good */
SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_PHY_CTRL, PHY_M_PC_FL_GOOD);
#endif /* XXX */
#ifndef VCPU
if (pPrt->PLinkSpeed != SK_LSPEED_AUTO) {
/* Write Ext. PHY Specific Control */
SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_EXT_CTRL,
(SK_U16)((pPrt->PLinkSpeed + 2) << 4));
}
#endif /* VCPU */
}
#ifdef TEST_ONLY
else if (pPrt->PLinkSpeed == SK_LSPEED_10MBPS) {
/* Write PHY Specific Control */
SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_PHY_CTRL,
PHY_M_PC_EN_DET_MSK);
}
#endif
/* Write to the PHY Control register */
SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_CTRL, PhyCtrl);
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
("Set PHY Ctrl Reg.=0x%04X\n", PhyCtrl));
#ifdef VCPU
VCpuWait(2000);
#else
LedCtrl = PHY_M_LED_PULS_DUR(PULS_170MS) | PHY_M_LED_BLINK_RT(BLINK_84MS);
if ((pAC->GIni.GILedBlinkCtrl & SK_ACT_LED_BLINK) != 0) {
LedCtrl |= PHY_M_LEDC_RX_CTRL | PHY_M_LEDC_TX_CTRL;
}
if ((pAC->GIni.GILedBlinkCtrl & SK_DUP_LED_NORMAL) != 0) {
LedCtrl |= PHY_M_LEDC_DP_CTRL;
}
SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_LED_CTRL, LedCtrl);
if ((pAC->GIni.GILedBlinkCtrl & SK_LED_LINK100_ON) != 0) {
/* only in forced 100 Mbps mode */
if (!AutoNeg && pPrt->PLinkSpeed == SK_LSPEED_100MBPS) {
SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_LED_OVER,
PHY_M_LED_MO_100(MO_LED_ON));
}
}
#ifdef SK_DIAG
c_print("Set PHY Ctrl=0x%04X\n", PhyCtrl);
c_print("Set 1000 B-T=0x%04X\n", C1000BaseT);
c_print("Set Auto-Neg=0x%04X\n", AutoNegAdv);
c_print("Set Ext Ctrl=0x%04X\n", ExtPhyCtrl);
#endif /* SK_DIAG */
#if defined(SK_DIAG) || defined(DEBUG)
/* Read PHY Control */
SkGmPhyRead(pAC, IoC, Port, PHY_MARV_CTRL, &PhyCtrl);
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
("PHY Ctrl Reg.=0x%04X\n", PhyCtrl));
/* Read 1000Base-T Control Register */
SkGmPhyRead(pAC, IoC, Port, PHY_MARV_1000T_CTRL, &C1000BaseT);
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
("1000B-T Ctrl =0x%04X\n", C1000BaseT));
/* Read AutoNeg Advertisement Register */
SkGmPhyRead(pAC, IoC, Port, PHY_MARV_AUNE_ADV, &AutoNegAdv);
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
("Auto-Neg.Adv.=0x%04X\n", AutoNegAdv));
/* Read Ext. PHY Specific Control */
SkGmPhyRead(pAC, IoC, Port, PHY_MARV_EXT_CTRL, &ExtPhyCtrl);
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
("Ext. PHY Ctrl=0x%04X\n", ExtPhyCtrl));
/* Read PHY Status */
SkGmPhyRead(pAC, IoC, Port, PHY_MARV_STAT, &PhyStat);
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
("PHY Stat Reg.=0x%04X\n", PhyStat));
SkGmPhyRead(pAC, IoC, Port, PHY_MARV_STAT, &PhyStat1);
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
("PHY Stat Reg.=0x%04X\n", PhyStat1));
/* Read PHY Specific Status */
SkGmPhyRead(pAC, IoC, Port, PHY_MARV_PHY_STAT, &PhySpecStat);
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
("PHY Spec Stat=0x%04X\n", PhySpecStat));
#endif /* SK_DIAG || DEBUG */
#ifdef SK_DIAG
c_print("PHY Ctrl Reg=0x%04X\n", PhyCtrl);
c_print("PHY 1000 Reg=0x%04X\n", C1000BaseT);
c_print("PHY AnAd Reg=0x%04X\n", AutoNegAdv);
c_print("Ext Ctrl Reg=0x%04X\n", ExtPhyCtrl);
c_print("PHY Stat Reg=0x%04X\n", PhyStat);
c_print("PHY Stat Reg=0x%04X\n", PhyStat1);
c_print("PHY Spec Reg=0x%04X\n", PhySpecStat);
#endif /* SK_DIAG */
#endif /* VCPU */
} /* SkGmInitPhyMarv */
#endif /* YUKON */
#ifdef OTHER_PHY
/******************************************************************************
*
* SkXmInitPhyLone() - Initialize the Level One Phy registers
*
* Description: initializes all the Level One Phy registers
*
* Note:
*
* Returns:
* nothing
*/
static void SkXmInitPhyLone(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port, /* Port Index (MAC_1 + n) */
SK_BOOL DoLoop) /* Should a Phy LoopBack be set-up? */
{
SK_GEPORT *pPrt;
SK_U16 Ctrl1;
SK_U16 Ctrl2;
SK_U16 Ctrl3;
Ctrl1 = PHY_CT_SP1000;
Ctrl2 = 0;
Ctrl3 = PHY_SEL_TYPE;
pPrt = &pAC->GIni.GP[Port];
/* manually Master/Slave ? */
if (pPrt->PMSMode != SK_MS_MODE_AUTO) {
Ctrl2 |= PHY_L_1000C_MSE;
if (pPrt->PMSMode == SK_MS_MODE_MASTER) {
Ctrl2 |= PHY_L_1000C_MSC;
}
}
/* Auto-negotiation ? */
if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) {
/*
* level one spec say: "1000 Mbps: manual mode not allowed"
* but lets see what happens...
*/
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
("InitPhyLone: no auto-negotiation Port %d\n", Port));
/* Set DuplexMode in Config register */
if (pPrt->PLinkMode == SK_LMODE_FULL) {
Ctrl1 |= PHY_CT_DUP_MD;
}
/* Determine Master/Slave manually if not already done */
if (pPrt->PMSMode == SK_MS_MODE_AUTO) {
Ctrl2 |= PHY_L_1000C_MSE; /* set it to Slave */
}
/*
* Do NOT enable Auto-negotiation here. This would hold
* the link down because no IDLES are transmitted
*/
}
else {
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
("InitPhyLone: with auto-negotiation Port %d\n", Port));
/* Set Auto-negotiation advertisement */
/* Set Full/half duplex capabilities */
switch (pPrt->PLinkMode) {
case SK_LMODE_AUTOHALF:
Ctrl2 |= PHY_L_1000C_AHD;
break;
case SK_LMODE_AUTOFULL:
Ctrl2 |= PHY_L_1000C_AFD;
break;
case SK_LMODE_AUTOBOTH:
Ctrl2 |= PHY_L_1000C_AFD | PHY_L_1000C_AHD;
break;
default:
SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E015,
SKERR_HWI_E015MSG);
}
/* Set Flow-control capabilities */
switch (pPrt->PFlowCtrlMode) {
case SK_FLOW_MODE_NONE:
Ctrl3 |= PHY_L_P_NO_PAUSE;
break;
case SK_FLOW_MODE_LOC_SEND:
Ctrl3 |= PHY_L_P_ASYM_MD;
break;
case SK_FLOW_MODE_SYMMETRIC:
Ctrl3 |= PHY_L_P_SYM_MD;
break;
case SK_FLOW_MODE_SYM_OR_REM:
Ctrl3 |= PHY_L_P_BOTH_MD;
break;
default:
SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E016,
SKERR_HWI_E016MSG);
}
/* Restart Auto-negotiation */
Ctrl1 = PHY_CT_ANE | PHY_CT_RE_CFG;
}
/* Write 1000Base-T Control Register */
SkXmPhyWrite(pAC, IoC, Port, PHY_LONE_1000T_CTRL, Ctrl2);
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
("1000B-T Ctrl Reg=0x%04X\n", Ctrl2));
/* Write AutoNeg Advertisement Register */
SkXmPhyWrite(pAC, IoC, Port, PHY_LONE_AUNE_ADV, Ctrl3);
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
("Auto-Neg.Adv.Reg=0x%04X\n", Ctrl3));
if (DoLoop) {
/* Set the Phy Loopback bit, too */
Ctrl1 |= PHY_CT_LOOP;
}
/* Write to the Phy control register */
SkXmPhyWrite(pAC, IoC, Port, PHY_LONE_CTRL, Ctrl1);
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
("PHY Control Reg=0x%04X\n", Ctrl1));
} /* SkXmInitPhyLone */
/******************************************************************************
*
* SkXmInitPhyNat() - Initialize the National Phy registers
*
* Description: initializes all the National Phy registers
*
* Note:
*
* Returns:
* nothing
*/
static void SkXmInitPhyNat(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port, /* Port Index (MAC_1 + n) */
SK_BOOL DoLoop) /* Should a Phy LoopBack be set-up? */
{
/* todo: National */
} /* SkXmInitPhyNat */
#endif /* OTHER_PHY */
/******************************************************************************
*
* SkMacInitPhy() - Initialize the PHY registers
*
* Description: calls the Init PHY routines dep. on board type
*
* Note:
*
* Returns:
* nothing
*/
void SkMacInitPhy(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port, /* Port Index (MAC_1 + n) */
SK_BOOL DoLoop) /* Should a Phy LoopBack be set-up? */
{
SK_GEPORT *pPrt;
pPrt = &pAC->GIni.GP[Port];
#ifdef GENESIS
if (pAC->GIni.GIGenesis) {
switch (pPrt->PhyType) {
case SK_PHY_XMAC:
SkXmInitPhyXmac(pAC, IoC, Port, DoLoop);
break;
case SK_PHY_BCOM:
SkXmInitPhyBcom(pAC, IoC, Port, DoLoop);
break;
#ifdef OTHER_PHY
case SK_PHY_LONE:
SkXmInitPhyLone(pAC, IoC, Port, DoLoop);
break;
case SK_PHY_NAT:
SkXmInitPhyNat(pAC, IoC, Port, DoLoop);
break;
#endif /* OTHER_PHY */
}
}
#endif /* GENESIS */
#ifdef YUKON
if (pAC->GIni.GIYukon) {
SkGmInitPhyMarv(pAC, IoC, Port, DoLoop);
}
#endif /* YUKON */
} /* SkMacInitPhy */
#ifdef GENESIS
/******************************************************************************
*
* SkXmAutoNegDoneXmac() - Auto-negotiation handling
*
* Description:
* This function handles the auto-negotiation if the Done bit is set.
*
* Returns:
* SK_AND_OK o.k.
* SK_AND_DUP_CAP Duplex capability error happened
* SK_AND_OTHER Other error happened
*/
static int SkXmAutoNegDoneXmac(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port) /* Port Index (MAC_1 + n) */
{
SK_GEPORT *pPrt;
SK_U16 ResAb; /* Resolved Ability */
SK_U16 LPAb; /* Link Partner Ability */
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
("AutoNegDoneXmac, Port %d\n", Port));
pPrt = &pAC->GIni.GP[Port];
/* Get PHY parameters */
SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_AUNE_LP, &LPAb);
SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_RES_ABI, &ResAb);
if ((LPAb & PHY_X_AN_RFB) != 0) {
/* At least one of the remote fault bit is set */
/* Error */
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
("AutoNegFail: Remote fault bit set Port %d\n", Port));
pPrt->PAutoNegFail = SK_TRUE;
return(SK_AND_OTHER);
}
/* Check Duplex mismatch */
if ((ResAb & (PHY_X_RS_HD | PHY_X_RS_FD)) == PHY_X_RS_FD) {
pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_AUTOFULL;
}
else if ((ResAb & (PHY_X_RS_HD | PHY_X_RS_FD)) == PHY_X_RS_HD) {
pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_AUTOHALF;
}
else {
/* Error */
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
("AutoNegFail: Duplex mode mismatch Port %d\n", Port));
pPrt->PAutoNegFail = SK_TRUE;
return(SK_AND_DUP_CAP);
}
/* Check PAUSE mismatch */
/* We are NOT using chapter 4.23 of the Xaqti manual */
/* We are using IEEE 802.3z/D5.0 Table 37-4 */
if ((pPrt->PFlowCtrlMode == SK_FLOW_MODE_SYMMETRIC ||
pPrt->PFlowCtrlMode == SK_FLOW_MODE_SYM_OR_REM) &&
(LPAb & PHY_X_P_SYM_MD) != 0) {
/* Symmetric PAUSE */
pPrt->PFlowCtrlStatus = SK_FLOW_STAT_SYMMETRIC;
}
else if (pPrt->PFlowCtrlMode == SK_FLOW_MODE_SYM_OR_REM &&
(LPAb & PHY_X_RS_PAUSE) == PHY_X_P_ASYM_MD) {
/* Enable PAUSE receive, disable PAUSE transmit */
pPrt->PFlowCtrlStatus = SK_FLOW_STAT_REM_SEND;
}
else if (pPrt->PFlowCtrlMode == SK_FLOW_MODE_LOC_SEND &&
(LPAb & PHY_X_RS_PAUSE) == PHY_X_P_BOTH_MD) {
/* Disable PAUSE receive, enable PAUSE transmit */
pPrt->PFlowCtrlStatus = SK_FLOW_STAT_LOC_SEND;
}
else {
/* PAUSE mismatch -> no PAUSE */
pPrt->PFlowCtrlStatus = SK_FLOW_STAT_NONE;
}
pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_1000MBPS;
return(SK_AND_OK);
} /* SkXmAutoNegDoneXmac */
/******************************************************************************
*
* SkXmAutoNegDoneBcom() - Auto-negotiation handling
*
* Description:
* This function handles the auto-negotiation if the Done bit is set.
*
* Returns:
* SK_AND_OK o.k.
* SK_AND_DUP_CAP Duplex capability error happened
* SK_AND_OTHER Other error happened
*/
static int SkXmAutoNegDoneBcom(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port) /* Port Index (MAC_1 + n) */
{
SK_GEPORT *pPrt;
SK_U16 LPAb; /* Link Partner Ability */
SK_U16 AuxStat; /* Auxiliary Status */
#ifdef TEST_ONLY
01-Sep-2000 RA;:;:
SK_U16 ResAb; /* Resolved Ability */
#endif /* 0 */
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
("AutoNegDoneBcom, Port %d\n", Port));
pPrt = &pAC->GIni.GP[Port];
/* Get PHY parameters */
SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_LP, &LPAb);
#ifdef TEST_ONLY
01-Sep-2000 RA;:;:
SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &ResAb);
#endif /* 0 */
SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_STAT, &AuxStat);
if ((LPAb & PHY_B_AN_RF) != 0) {
/* Remote fault bit is set: Error */
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
("AutoNegFail: Remote fault bit set Port %d\n", Port));
pPrt->PAutoNegFail = SK_TRUE;
return(SK_AND_OTHER);
}
/* Check Duplex mismatch */
if ((AuxStat & PHY_B_AS_AN_RES_MSK) == PHY_B_RES_1000FD) {
pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_AUTOFULL;
}
else if ((AuxStat & PHY_B_AS_AN_RES_MSK) == PHY_B_RES_1000HD) {
pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_AUTOHALF;
}
else {
/* Error */
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
("AutoNegFail: Duplex mode mismatch Port %d\n", Port));
pPrt->PAutoNegFail = SK_TRUE;
return(SK_AND_DUP_CAP);
}
#ifdef TEST_ONLY
01-Sep-2000 RA;:;:
/* Check Master/Slave resolution */
if ((ResAb & PHY_B_1000S_MSF) != 0) {
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
("Master/Slave Fault Port %d\n", Port));
pPrt->PAutoNegFail = SK_TRUE;
pPrt->PMSStatus = SK_MS_STAT_FAULT;
return(SK_AND_OTHER);
}
pPrt->PMSStatus = ((ResAb & PHY_B_1000S_MSR) != 0) ?
SK_MS_STAT_MASTER : SK_MS_STAT_SLAVE;
#endif /* 0 */
/* Check PAUSE mismatch ??? */
/* We are using IEEE 802.3z/D5.0 Table 37-4 */
if ((AuxStat & PHY_B_AS_PAUSE_MSK) == PHY_B_AS_PAUSE_MSK) {
/* Symmetric PAUSE */
pPrt->PFlowCtrlStatus = SK_FLOW_STAT_SYMMETRIC;
}
else if ((AuxStat & PHY_B_AS_PAUSE_MSK) == PHY_B_AS_PRR) {
/* Enable PAUSE receive, disable PAUSE transmit */
pPrt->PFlowCtrlStatus = SK_FLOW_STAT_REM_SEND;
}
else if ((AuxStat & PHY_B_AS_PAUSE_MSK) == PHY_B_AS_PRT) {
/* Disable PAUSE receive, enable PAUSE transmit */
pPrt->PFlowCtrlStatus = SK_FLOW_STAT_LOC_SEND;
}
else {
/* PAUSE mismatch -> no PAUSE */
pPrt->PFlowCtrlStatus = SK_FLOW_STAT_NONE;
}
pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_1000MBPS;
return(SK_AND_OK);
} /* SkXmAutoNegDoneBcom */
#endif /* GENESIS */
#ifdef YUKON
/******************************************************************************
*
* SkGmAutoNegDoneMarv() - Auto-negotiation handling
*
* Description:
* This function handles the auto-negotiation if the Done bit is set.
*
* Returns:
* SK_AND_OK o.k.
* SK_AND_DUP_CAP Duplex capability error happened
* SK_AND_OTHER Other error happened
*/
static int SkGmAutoNegDoneMarv(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port) /* Port Index (MAC_1 + n) */
{
SK_GEPORT *pPrt;
SK_U16 LPAb; /* Link Partner Ability */
SK_U16 ResAb; /* Resolved Ability */
SK_U16 AuxStat; /* Auxiliary Status */
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
("AutoNegDoneMarv, Port %d\n", Port));
pPrt = &pAC->GIni.GP[Port];
/* Get PHY parameters */
SkGmPhyRead(pAC, IoC, Port, PHY_MARV_AUNE_LP, &LPAb);
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
("Link P.Abil.=0x%04X\n", LPAb));
if ((LPAb & PHY_M_AN_RF) != 0) {
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
("AutoNegFail: Remote fault bit set Port %d\n", Port));
pPrt->PAutoNegFail = SK_TRUE;
return(SK_AND_OTHER);
}
SkGmPhyRead(pAC, IoC, Port, PHY_MARV_1000T_STAT, &ResAb);
/* Check Master/Slave resolution */
if ((ResAb & PHY_B_1000S_MSF) != 0) {
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
("Master/Slave Fault Port %d\n", Port));
pPrt->PAutoNegFail = SK_TRUE;
pPrt->PMSStatus = SK_MS_STAT_FAULT;
return(SK_AND_OTHER);
}
pPrt->PMSStatus = ((ResAb & PHY_B_1000S_MSR) != 0) ?
(SK_U8)SK_MS_STAT_MASTER : (SK_U8)SK_MS_STAT_SLAVE;
/* Read PHY Specific Status */
SkGmPhyRead(pAC, IoC, Port, PHY_MARV_PHY_STAT, &AuxStat);
/* Check Speed & Duplex resolved */
if ((AuxStat & PHY_M_PS_SPDUP_RES) == 0) {
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
("AutoNegFail: Speed & Duplex not resolved, Port %d\n", Port));
pPrt->PAutoNegFail = SK_TRUE;
pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_UNKNOWN;
return(SK_AND_DUP_CAP);
}
if ((AuxStat & PHY_M_PS_FULL_DUP) != 0) {
pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_AUTOFULL;
}
else {
pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_AUTOHALF;
}
/* Check PAUSE mismatch ??? */
/* We are using IEEE 802.3z/D5.0 Table 37-4 */
if ((AuxStat & PHY_M_PS_PAUSE_MSK) == PHY_M_PS_PAUSE_MSK) {
/* Symmetric PAUSE */
pPrt->PFlowCtrlStatus = SK_FLOW_STAT_SYMMETRIC;
}
else if ((AuxStat & PHY_M_PS_PAUSE_MSK) == PHY_M_PS_RX_P_EN) {
/* Enable PAUSE receive, disable PAUSE transmit */
pPrt->PFlowCtrlStatus = SK_FLOW_STAT_REM_SEND;
}
else if ((AuxStat & PHY_M_PS_PAUSE_MSK) == PHY_M_PS_TX_P_EN) {
/* Disable PAUSE receive, enable PAUSE transmit */
pPrt->PFlowCtrlStatus = SK_FLOW_STAT_LOC_SEND;
}
else {
/* PAUSE mismatch -> no PAUSE */
pPrt->PFlowCtrlStatus = SK_FLOW_STAT_NONE;
}
/* set used link speed */
switch ((unsigned)(AuxStat & PHY_M_PS_SPEED_MSK)) {
case (unsigned)PHY_M_PS_SPEED_1000:
pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_1000MBPS;
break;
case PHY_M_PS_SPEED_100:
pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_100MBPS;
break;
default:
pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_10MBPS;
}
return(SK_AND_OK);
} /* SkGmAutoNegDoneMarv */
#endif /* YUKON */
#ifdef OTHER_PHY
/******************************************************************************
*
* SkXmAutoNegDoneLone() - Auto-negotiation handling
*
* Description:
* This function handles the auto-negotiation if the Done bit is set.
*
* Returns:
* SK_AND_OK o.k.
* SK_AND_DUP_CAP Duplex capability error happened
* SK_AND_OTHER Other error happened
*/
static int SkXmAutoNegDoneLone(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port) /* Port Index (MAC_1 + n) */
{
SK_GEPORT *pPrt;
SK_U16 ResAb; /* Resolved Ability */
SK_U16 LPAb; /* Link Partner Ability */
SK_U16 QuickStat; /* Auxiliary Status */
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
("AutoNegDoneLone, Port %d\n", Port));
pPrt = &pAC->GIni.GP[Port];
/* Get PHY parameters */
SkXmPhyRead(pAC, IoC, Port, PHY_LONE_AUNE_LP, &LPAb);
SkXmPhyRead(pAC, IoC, Port, PHY_LONE_1000T_STAT, &ResAb);
SkXmPhyRead(pAC, IoC, Port, PHY_LONE_Q_STAT, &QuickStat);
if ((LPAb & PHY_L_AN_RF) != 0) {
/* Remote fault bit is set */
/* Error */
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
("AutoNegFail: Remote fault bit set Port %d\n", Port));
pPrt->PAutoNegFail = SK_TRUE;
return(SK_AND_OTHER);
}
/* Check Duplex mismatch */
if ((QuickStat & PHY_L_QS_DUP_MOD) != 0) {
pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_AUTOFULL;
}
else {
pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_AUTOHALF;
}
/* Check Master/Slave resolution */
if ((ResAb & PHY_L_1000S_MSF) != 0) {
/* Error */
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
("Master/Slave Fault Port %d\n", Port));
pPrt->PAutoNegFail = SK_TRUE;
pPrt->PMSStatus = SK_MS_STAT_FAULT;
return(SK_AND_OTHER);
}
else if (ResAb & PHY_L_1000S_MSR) {
pPrt->PMSStatus = SK_MS_STAT_MASTER;
}
else {
pPrt->PMSStatus = SK_MS_STAT_SLAVE;
}
/* Check PAUSE mismatch */
/* We are using IEEE 802.3z/D5.0 Table 37-4 */
/* we must manually resolve the abilities here */
pPrt->PFlowCtrlStatus = SK_FLOW_STAT_NONE;
switch (pPrt->PFlowCtrlMode) {
case SK_FLOW_MODE_NONE:
/* default */
break;
case SK_FLOW_MODE_LOC_SEND:
if ((QuickStat & (PHY_L_QS_PAUSE | PHY_L_QS_AS_PAUSE)) ==
(PHY_L_QS_PAUSE | PHY_L_QS_AS_PAUSE)) {
/* Disable PAUSE receive, enable PAUSE transmit */
pPrt->PFlowCtrlStatus = SK_FLOW_STAT_LOC_SEND;
}
break;
case SK_FLOW_MODE_SYMMETRIC:
if ((QuickStat & PHY_L_QS_PAUSE) != 0) {
/* Symmetric PAUSE */
pPrt->PFlowCtrlStatus = SK_FLOW_STAT_SYMMETRIC;
}
break;
case SK_FLOW_MODE_SYM_OR_REM:
if ((QuickStat & (PHY_L_QS_PAUSE | PHY_L_QS_AS_PAUSE)) ==
PHY_L_QS_AS_PAUSE) {
/* Enable PAUSE receive, disable PAUSE transmit */
pPrt->PFlowCtrlStatus = SK_FLOW_STAT_REM_SEND;
}
else if ((QuickStat & PHY_L_QS_PAUSE) != 0) {
/* Symmetric PAUSE */
pPrt->PFlowCtrlStatus = SK_FLOW_STAT_SYMMETRIC;
}
break;
default:
SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E016,
SKERR_HWI_E016MSG);
}
return(SK_AND_OK);
} /* SkXmAutoNegDoneLone */
/******************************************************************************
*
* SkXmAutoNegDoneNat() - Auto-negotiation handling
*
* Description:
* This function handles the auto-negotiation if the Done bit is set.
*
* Returns:
* SK_AND_OK o.k.
* SK_AND_DUP_CAP Duplex capability error happened
* SK_AND_OTHER Other error happened
*/
static int SkXmAutoNegDoneNat(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port) /* Port Index (MAC_1 + n) */
{
/* todo: National */
return(SK_AND_OK);
} /* SkXmAutoNegDoneNat */
#endif /* OTHER_PHY */
/******************************************************************************
*
* SkMacAutoNegDone() - Auto-negotiation handling
*
* Description: calls the auto-negotiation done routines dep. on board type
*
* Returns:
* SK_AND_OK o.k.
* SK_AND_DUP_CAP Duplex capability error happened
* SK_AND_OTHER Other error happened
*/
int SkMacAutoNegDone(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port) /* Port Index (MAC_1 + n) */
{
SK_GEPORT *pPrt;
int Rtv;
Rtv = SK_AND_OK;
pPrt = &pAC->GIni.GP[Port];
#ifdef GENESIS
if (pAC->GIni.GIGenesis) {
switch (pPrt->PhyType) {
case SK_PHY_XMAC:
Rtv = SkXmAutoNegDoneXmac(pAC, IoC, Port);
break;
case SK_PHY_BCOM:
Rtv = SkXmAutoNegDoneBcom(pAC, IoC, Port);
break;
#ifdef OTHER_PHY
case SK_PHY_LONE:
Rtv = SkXmAutoNegDoneLone(pAC, IoC, Port);
break;
case SK_PHY_NAT:
Rtv = SkXmAutoNegDoneNat(pAC, IoC, Port);
break;
#endif /* OTHER_PHY */
default:
return(SK_AND_OTHER);
}
}
#endif /* GENESIS */
#ifdef YUKON
if (pAC->GIni.GIYukon) {
Rtv = SkGmAutoNegDoneMarv(pAC, IoC, Port);
}
#endif /* YUKON */
if (Rtv != SK_AND_OK) {
return(Rtv);
}
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
("AutoNeg done Port %d\n", Port));
/* We checked everything and may now enable the link */
pPrt->PAutoNegFail = SK_FALSE;
SkMacRxTxEnable(pAC, IoC, Port);
return(SK_AND_OK);
} /* SkMacAutoNegDone */
/******************************************************************************
*
* SkMacRxTxEnable() - Enable Rx/Tx activity if port is up
*
* Description: enables Rx/Tx dep. on board type
*
* Returns:
* 0 o.k.
* != 0 Error happened
*/
int SkMacRxTxEnable(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port) /* Port Index (MAC_1 + n) */
{
SK_GEPORT *pPrt;
SK_U16 Reg; /* 16-bit register value */
SK_U16 IntMask; /* MAC interrupt mask */
#ifdef GENESIS
SK_U16 SWord;
#endif
pPrt = &pAC->GIni.GP[Port];
if (!pPrt->PHWLinkUp) {
/* The Hardware link is NOT up */
return(0);
}
if ((pPrt->PLinkMode == SK_LMODE_AUTOHALF ||
pPrt->PLinkMode == SK_LMODE_AUTOFULL ||
pPrt->PLinkMode == SK_LMODE_AUTOBOTH) &&
pPrt->PAutoNegFail) {
/* Auto-negotiation is not done or failed */
return(0);
}
#ifdef GENESIS
if (pAC->GIni.GIGenesis) {
/* set Duplex Mode and Pause Mode */
SkXmInitDupMd(pAC, IoC, Port);
SkXmInitPauseMd(pAC, IoC, Port);
/*
* Initialize the Interrupt Mask Register. Default IRQs are...
* - Link Asynchronous Event
* - Link Partner requests config
* - Auto Negotiation Done
* - Rx Counter Event Overflow
* - Tx Counter Event Overflow
* - Transmit FIFO Underrun
*/
IntMask = XM_DEF_MSK;
#ifdef DEBUG
/* add IRQ for Receive FIFO Overflow */
IntMask &= ~XM_IS_RXF_OV;
#endif /* DEBUG */
if (pPrt->PhyType != SK_PHY_XMAC) {
/* disable GP0 interrupt bit */
IntMask |= XM_IS_INP_ASS;
}
XM_OUT16(IoC, Port, XM_IMSK, IntMask);
/* get MMU Command Reg. */
XM_IN16(IoC, Port, XM_MMU_CMD, &Reg);
if (pPrt->PhyType != SK_PHY_XMAC &&
(pPrt->PLinkModeStatus == SK_LMODE_STAT_FULL ||
pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOFULL)) {
/* set to Full Duplex */
Reg |= XM_MMU_GMII_FD;
}
switch (pPrt->PhyType) {
case SK_PHY_BCOM:
/*
* Workaround BCOM Errata (#10523) for all BCom Phys
* Enable Power Management after link up
*/
SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, &SWord);
SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_AUX_CTRL,
(SK_U16)(SWord & ~PHY_B_AC_DIS_PM));
SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_INT_MASK,
(SK_U16)PHY_B_DEF_MSK);
break;
#ifdef OTHER_PHY
case SK_PHY_LONE:
SkXmPhyWrite(pAC, IoC, Port, PHY_LONE_INT_ENAB, PHY_L_DEF_MSK);
break;
case SK_PHY_NAT:
/* todo National:
SkXmPhyWrite(pAC, IoC, Port, PHY_NAT_INT_MASK, PHY_N_DEF_MSK); */
/* no interrupts possible from National ??? */
break;
#endif /* OTHER_PHY */
}
/* enable Rx/Tx */
XM_OUT16(IoC, Port, XM_MMU_CMD, Reg | XM_MMU_ENA_RX | XM_MMU_ENA_TX);
}
#endif /* GENESIS */
#ifdef YUKON
if (pAC->GIni.GIYukon) {
/*
* Initialize the Interrupt Mask Register. Default IRQs are...
* - Rx Counter Event Overflow
* - Tx Counter Event Overflow
* - Transmit FIFO Underrun
*/
IntMask = GMAC_DEF_MSK;
#ifdef DEBUG
/* add IRQ for Receive FIFO Overrun */
IntMask |= GM_IS_RX_FF_OR;
#endif /* DEBUG */
SK_OUT8(IoC, GMAC_IRQ_MSK, (SK_U8)IntMask);
/* get General Purpose Control */
GM_IN16(IoC, Port, GM_GP_CTRL, &Reg);
if (pPrt->PLinkModeStatus == SK_LMODE_STAT_FULL ||
pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOFULL) {
/* set to Full Duplex */
Reg |= GM_GPCR_DUP_FULL;
}
/* enable Rx/Tx */
GM_OUT16(IoC, Port, GM_GP_CTRL, (SK_U16)(Reg | GM_GPCR_RX_ENA |
GM_GPCR_TX_ENA));
#ifndef VCPU
/* Enable all PHY interrupts */
SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_INT_MASK,
(SK_U16)PHY_M_DEF_MSK);
#endif /* VCPU */
}
#endif /* YUKON */
return(0);
} /* SkMacRxTxEnable */
/******************************************************************************
*
* SkMacRxTxDisable() - Disable Receiver and Transmitter
*
* Description: disables Rx/Tx dep. on board type
*
* Returns: N/A
*/
void SkMacRxTxDisable(
SK_AC *pAC, /* Adapter Context */
SK_IOC IoC, /* IO context */
int Port) /* Port Index (MAC_1 + n) */
{
SK_U16 Word;
#ifdef GENESIS
if (pAC->GIni.GIGenesis) {
XM_IN16(IoC, Port, XM_MMU_CMD, &Word);
XM_OUT16(IoC, Port, XM_MMU_CMD, Word & ~(XM_MMU_ENA_RX | XM_MMU_ENA_TX));
/* dummy read to ensure writing */
XM_IN16(IoC, Port, XM_MMU_CMD, &Word);
}
#endif /* GENESIS */
#ifdef YUKON
if (pAC->GIni.GIYukon) {
GM_IN16(IoC, Port, GM_GP_CTRL, &Word);
GM_OUT16(IoC, Port, GM_GP_CTRL, (SK_U16)(Word & ~(GM_GPCR_RX_ENA |
GM_GPCR_TX_ENA)));
/* dummy read to ensure writing */
GM_IN16(IoC, Port, GM_GP_CTRL, &Word);
}
#endif /* YUKON */
} /* SkMacRxTxDisable */
/******************************************************************************
*
* SkMacIrqDisable() - Disable IRQ from MAC
*
* Description: sets the IRQ-mask to disable IRQ dep. on board type
*
* Returns: N/A
*/
void SkMacIrqDisable(
SK_AC *pAC, /* Adapter Context */
SK_IOC IoC, /* IO context */
int Port) /* Port Index (MAC_1 + n) */
{
SK_GEPORT *pPrt;
#ifdef GENESIS
SK_U16 Word;
#endif
pPrt = &pAC->GIni.GP[Port];
#ifdef GENESIS
if (pAC->GIni.GIGenesis) {
/* disable all XMAC IRQs */
XM_OUT16(IoC, Port, XM_IMSK, 0xffff);
/* Disable all PHY interrupts */
switch (pPrt->PhyType) {
case SK_PHY_BCOM:
/* Make sure that PHY is initialized */
if (pPrt->PState != SK_PRT_RESET) {
/* NOT allowed if BCOM is in RESET state */
/* Workaround BCOM Errata (#10523) all BCom */
/* Disable Power Management if link is down */
SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, &Word);
SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_AUX_CTRL,
(SK_U16)(Word | PHY_B_AC_DIS_PM));
SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_INT_MASK, 0xffff);
}
break;
#ifdef OTHER_PHY
case SK_PHY_LONE:
SkXmPhyWrite(pAC, IoC, Port, PHY_LONE_INT_ENAB, 0);
break;
case SK_PHY_NAT:
/* todo: National
SkXmPhyWrite(pAC, IoC, Port, PHY_NAT_INT_MASK, 0xffff); */
break;
#endif /* OTHER_PHY */
}
}
#endif /* GENESIS */
#ifdef YUKON
if (pAC->GIni.GIYukon) {
/* disable all GMAC IRQs */
SK_OUT8(IoC, GMAC_IRQ_MSK, 0);
#ifndef VCPU
/* Disable all PHY interrupts */
SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_INT_MASK, 0);
#endif /* VCPU */
}
#endif /* YUKON */
} /* SkMacIrqDisable */
#ifdef SK_DIAG
/******************************************************************************
*
* SkXmSendCont() - Enable / Disable Send Continuous Mode
*
* Description: enable / disable Send Continuous Mode on XMAC
*
* Returns:
* nothing
*/
void SkXmSendCont(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port, /* Port Index (MAC_1 + n) */
SK_BOOL Enable) /* Enable / Disable */
{
SK_U32 MdReg;
XM_IN32(IoC, Port, XM_MODE, &MdReg);
if (Enable) {
MdReg |= XM_MD_TX_CONT;
}
else {
MdReg &= ~XM_MD_TX_CONT;
}
/* setup Mode Register */
XM_OUT32(IoC, Port, XM_MODE, MdReg);
} /* SkXmSendCont */
/******************************************************************************
*
* SkMacTimeStamp() - Enable / Disable Time Stamp
*
* Description: enable / disable Time Stamp generation for Rx packets
*
* Returns:
* nothing
*/
void SkMacTimeStamp(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port, /* Port Index (MAC_1 + n) */
SK_BOOL Enable) /* Enable / Disable */
{
SK_U32 MdReg;
SK_U8 TimeCtrl;
if (pAC->GIni.GIGenesis) {
XM_IN32(IoC, Port, XM_MODE, &MdReg);
if (Enable) {
MdReg |= XM_MD_ATS;
}
else {
MdReg &= ~XM_MD_ATS;
}
/* setup Mode Register */
XM_OUT32(IoC, Port, XM_MODE, MdReg);
}
else {
if (Enable) {
TimeCtrl = GMT_ST_START | GMT_ST_CLR_IRQ;
}
else {
TimeCtrl = GMT_ST_STOP | GMT_ST_CLR_IRQ;
}
/* Start/Stop Time Stamp Timer */
SK_OUT8(IoC, GMAC_TI_ST_CTRL, TimeCtrl);
}
} /* SkMacTimeStamp*/
#else /* !SK_DIAG */
#ifdef GENESIS
/******************************************************************************
*
* SkXmAutoNegLipaXmac() - Decides whether Link Partner could do auto-neg
*
* This function analyses the Interrupt status word. If any of the
* Auto-negotiating interrupt bits are set, the PLipaAutoNeg variable
* is set true.
*/
void SkXmAutoNegLipaXmac(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port, /* Port Index (MAC_1 + n) */
SK_U16 IStatus) /* Interrupt Status word to analyse */
{
SK_GEPORT *pPrt;
pPrt = &pAC->GIni.GP[Port];
if (pPrt->PLipaAutoNeg != SK_LIPA_AUTO &&
(IStatus & (XM_IS_LIPA_RC | XM_IS_RX_PAGE | XM_IS_AND)) != 0) {
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
("AutoNegLipa: AutoNeg detected on Port %d, IStatus=0x%04X\n",
Port, IStatus));
pPrt->PLipaAutoNeg = SK_LIPA_AUTO;
}
} /* SkXmAutoNegLipaXmac */
#endif /* GENESIS */
/******************************************************************************
*
* SkMacAutoNegLipaPhy() - Decides whether Link Partner could do auto-neg
*
* This function analyses the PHY status word.
* If any of the Auto-negotiating bits are set, the PLipaAutoNeg variable
* is set true.
*/
void SkMacAutoNegLipaPhy(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port, /* Port Index (MAC_1 + n) */
SK_U16 PhyStat) /* PHY Status word to analyse */
{
SK_GEPORT *pPrt;
pPrt = &pAC->GIni.GP[Port];
if (pPrt->PLipaAutoNeg != SK_LIPA_AUTO &&
(PhyStat & PHY_ST_AN_OVER) != 0) {
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
("AutoNegLipa: AutoNeg detected on Port %d, PhyStat=0x%04X\n",
Port, PhyStat));
pPrt->PLipaAutoNeg = SK_LIPA_AUTO;
}
} /* SkMacAutoNegLipaPhy */
#ifdef GENESIS
/******************************************************************************
*
* SkXmIrq() - Interrupt Service Routine
*
* Description: services an Interrupt Request of the XMAC
*
* Note:
* With an external PHY, some interrupt bits are not meaningfull any more:
* - LinkAsyncEvent (bit #14) XM_IS_LNK_AE
* - LinkPartnerReqConfig (bit #10) XM_IS_LIPA_RC
* - Page Received (bit #9) XM_IS_RX_PAGE
* - NextPageLoadedForXmt (bit #8) XM_IS_TX_PAGE
* - AutoNegDone (bit #7) XM_IS_AND
* Also probably not valid any more is the GP0 input bit:
* - GPRegisterBit0set XM_IS_INP_ASS
*
* Returns:
* nothing
*/
static void SkXmIrq(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port) /* Port Index (MAC_1 + n) */
{
SK_GEPORT *pPrt;
SK_EVPARA Para;
SK_U16 IStatus; /* Interrupt status read from the XMAC */
SK_U16 IStatus2;
#ifdef SK_SLIM
SK_U64 OverflowStatus;
#endif
pPrt = &pAC->GIni.GP[Port];
XM_IN16(IoC, Port, XM_ISRC, &IStatus);
/* LinkPartner Auto-negable? */
if (pPrt->PhyType == SK_PHY_XMAC) {
SkXmAutoNegLipaXmac(pAC, IoC, Port, IStatus);
}
else {
/* mask bits that are not used with ext. PHY */
IStatus &= ~(XM_IS_LNK_AE | XM_IS_LIPA_RC |
XM_IS_RX_PAGE | XM_IS_TX_PAGE |
XM_IS_AND | XM_IS_INP_ASS);
}
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
("XmacIrq Port %d Isr 0x%04X\n", Port, IStatus));
if (!pPrt->PHWLinkUp) {
/* Spurious XMAC interrupt */
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
("SkXmIrq: spurious interrupt on Port %d\n", Port));
return;
}
if ((IStatus & XM_IS_INP_ASS) != 0) {
/* Reread ISR Register if link is not in sync */
XM_IN16(IoC, Port, XM_ISRC, &IStatus2);
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
("SkXmIrq: Link async. Double check Port %d 0x%04X 0x%04X\n",
Port, IStatus, IStatus2));
IStatus &= ~XM_IS_INP_ASS;
IStatus |= IStatus2;
}
if ((IStatus & XM_IS_LNK_AE) != 0) {
/* not used, GP0 is used instead */
}
if ((IStatus & XM_IS_TX_ABORT) != 0) {
/* not used */
}
if ((IStatus & XM_IS_FRC_INT) != 0) {
/* not used, use ASIC IRQ instead if needed */
}
if ((IStatus & (XM_IS_INP_ASS | XM_IS_LIPA_RC | XM_IS_RX_PAGE)) != 0) {
SkHWLinkDown(pAC, IoC, Port);
/* Signal to RLMT */
Para.Para32[0] = (SK_U32)Port;
SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
/* Start workaround Errata #2 timer */
SkTimerStart(pAC, IoC, &pPrt->PWaTimer, SK_WA_INA_TIME,
SKGE_HWAC, SK_HWEV_WATIM, Para);
}
if ((IStatus & XM_IS_RX_PAGE) != 0) {
/* not used */
}
if ((IStatus & XM_IS_TX_PAGE) != 0) {
/* not used */
}
if ((IStatus & XM_IS_AND) != 0) {
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
("SkXmIrq: AND on link that is up Port %d\n", Port));
}
if ((IStatus & XM_IS_TSC_OV) != 0) {
/* not used */
}
/* Combined Tx & Rx Counter Overflow SIRQ Event */
if ((IStatus & (XM_IS_RXC_OV | XM_IS_TXC_OV)) != 0) {
#ifdef SK_SLIM
SkXmOverflowStatus(pAC, IoC, Port, IStatus, &OverflowStatus);
#else
Para.Para32[0] = (SK_U32)Port;
Para.Para32[1] = (SK_U32)IStatus;
SkPnmiEvent(pAC, IoC, SK_PNMI_EVT_SIRQ_OVERFLOW, Para);
#endif /* SK_SLIM */
}
if ((IStatus & XM_IS_RXF_OV) != 0) {
/* normal situation -> no effect */
#ifdef DEBUG
pPrt->PRxOverCnt++;
#endif /* DEBUG */
}
if ((IStatus & XM_IS_TXF_UR) != 0) {
/* may NOT happen -> error log */
SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E020, SKERR_SIRQ_E020MSG);
}
if ((IStatus & XM_IS_TX_COMP) != 0) {
/* not served here */
}
if ((IStatus & XM_IS_RX_COMP) != 0) {
/* not served here */
}
} /* SkXmIrq */
#endif /* GENESIS */
#ifdef YUKON
/******************************************************************************
*
* SkGmIrq() - Interrupt Service Routine
*
* Description: services an Interrupt Request of the GMAC
*
* Note:
*
* Returns:
* nothing
*/
static void SkGmIrq(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port) /* Port Index (MAC_1 + n) */
{
SK_GEPORT *pPrt;
SK_U8 IStatus; /* Interrupt status */
#ifdef SK_SLIM
SK_U64 OverflowStatus;
#else
SK_EVPARA Para;
#endif
pPrt = &pAC->GIni.GP[Port];
SK_IN8(IoC, GMAC_IRQ_SRC, &IStatus);
#ifdef XXX
/* LinkPartner Auto-negable? */
SkMacAutoNegLipaPhy(pAC, IoC, Port, IStatus);
#endif /* XXX */
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
("GmacIrq Port %d Isr 0x%04X\n", Port, IStatus));
/* Combined Tx & Rx Counter Overflow SIRQ Event */
if (IStatus & (GM_IS_RX_CO_OV | GM_IS_TX_CO_OV)) {
/* these IRQs will be cleared by reading GMACs register */
#ifdef SK_SLIM
SkGmOverflowStatus(pAC, IoC, Port, IStatus, &OverflowStatus);
#else
Para.Para32[0] = (SK_U32)Port;
Para.Para32[1] = (SK_U32)IStatus;
SkPnmiEvent(pAC, IoC, SK_PNMI_EVT_SIRQ_OVERFLOW, Para);
#endif
}
if (IStatus & GM_IS_RX_FF_OR) {
/* clear GMAC Rx FIFO Overrun IRQ */
SK_OUT8(IoC, MR_ADDR(Port, RX_GMF_CTRL_T), (SK_U8)GMF_CLI_RX_FO);
#ifdef DEBUG
pPrt->PRxOverCnt++;
#endif /* DEBUG */
}
if (IStatus & GM_IS_TX_FF_UR) {
/* clear GMAC Tx FIFO Underrun IRQ */
SK_OUT8(IoC, MR_ADDR(Port, TX_GMF_CTRL_T), (SK_U8)GMF_CLI_TX_FU);
/* may NOT happen -> error log */
SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E020, SKERR_SIRQ_E020MSG);
}
if (IStatus & GM_IS_TX_COMPL) {
/* not served here */
}
if (IStatus & GM_IS_RX_COMPL) {
/* not served here */
}
} /* SkGmIrq */
#endif /* YUKON */
/******************************************************************************
*
* SkMacIrq() - Interrupt Service Routine for MAC
*
* Description: calls the Interrupt Service Routine dep. on board type
*
* Returns:
* nothing
*/
void SkMacIrq(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port) /* Port Index (MAC_1 + n) */
{
#ifdef GENESIS
if (pAC->GIni.GIGenesis) {
/* IRQ from XMAC */
SkXmIrq(pAC, IoC, Port);
}
#endif /* GENESIS */
#ifdef YUKON
if (pAC->GIni.GIYukon) {
/* IRQ from GMAC */
SkGmIrq(pAC, IoC, Port);
}
#endif /* YUKON */
} /* SkMacIrq */
#endif /* !SK_DIAG */
#ifdef GENESIS
/******************************************************************************
*
* SkXmUpdateStats() - Force the XMAC to output the current statistic
*
* Description:
* The XMAC holds its statistic internally. To obtain the current
* values a command must be sent so that the statistic data will
* be written to a predefined memory area on the adapter.
*
* Returns:
* 0: success
* 1: something went wrong
*/
int SkXmUpdateStats(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
unsigned int Port) /* Port Index (MAC_1 + n) */
{
SK_GEPORT *pPrt;
SK_U16 StatReg;
int WaitIndex;
pPrt = &pAC->GIni.GP[Port];
WaitIndex = 0;
/* Send an update command to XMAC specified */
XM_OUT16(IoC, Port, XM_STAT_CMD, XM_SC_SNP_TXC | XM_SC_SNP_RXC);
/*
* It is an auto-clearing register. If the command bits
* went to zero again, the statistics are transferred.
* Normally the command should be executed immediately.
* But just to be sure we execute a loop.
*/
do {
XM_IN16(IoC, Port, XM_STAT_CMD, &StatReg);
if (++WaitIndex > 10) {
SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_HWI_E021, SKERR_HWI_E021MSG);
return(1);
}
} while ((StatReg & (XM_SC_SNP_TXC | XM_SC_SNP_RXC)) != 0);
return(0);
} /* SkXmUpdateStats */
/******************************************************************************
*
* SkXmMacStatistic() - Get XMAC counter value
*
* Description:
* Gets the 32bit counter value. Except for the octet counters
* the lower 32bit are counted in hardware and the upper 32bit
* must be counted in software by monitoring counter overflow interrupts.
*
* Returns:
* 0: success
* 1: something went wrong
*/
int SkXmMacStatistic(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
unsigned int Port, /* Port Index (MAC_1 + n) */
SK_U16 StatAddr, /* MIB counter base address */
SK_U32 SK_FAR *pVal) /* ptr to return statistic value */
{
if ((StatAddr < XM_TXF_OK) || (StatAddr > XM_RXF_MAX_SZ)) {
SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E022, SKERR_HWI_E022MSG);
return(1);
}
XM_IN32(IoC, Port, StatAddr, pVal);
return(0);
} /* SkXmMacStatistic */
/******************************************************************************
*
* SkXmResetCounter() - Clear MAC statistic counter
*
* Description:
* Force the XMAC to clear its statistic counter.
*
* Returns:
* 0: success
* 1: something went wrong
*/
int SkXmResetCounter(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
unsigned int Port) /* Port Index (MAC_1 + n) */
{
XM_OUT16(IoC, Port, XM_STAT_CMD, XM_SC_CLR_RXC | XM_SC_CLR_TXC);
/* Clear two times according to Errata #3 */
XM_OUT16(IoC, Port, XM_STAT_CMD, XM_SC_CLR_RXC | XM_SC_CLR_TXC);
return(0);
} /* SkXmResetCounter */
/******************************************************************************
*
* SkXmOverflowStatus() - Gets the status of counter overflow interrupt
*
* Description:
* Checks the source causing an counter overflow interrupt. On success the
* resulting counter overflow status is written to <pStatus>, whereas the
* upper dword stores the XMAC ReceiveCounterEvent register and the lower
* dword the XMAC TransmitCounterEvent register.
*
* Note:
* For XMAC the interrupt source is a self-clearing register, so the source
* must be checked only once. SIRQ module does another check to be sure
* that no interrupt get lost during process time.
*
* Returns:
* 0: success
* 1: something went wrong
*/
int SkXmOverflowStatus(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
unsigned int Port, /* Port Index (MAC_1 + n) */
SK_U16 IStatus, /* Interupt Status from MAC */
SK_U64 SK_FAR *pStatus) /* ptr for return overflow status value */
{
SK_U64 Status; /* Overflow status */
SK_U32 RegVal;
Status = 0;
if ((IStatus & XM_IS_RXC_OV) != 0) {
XM_IN32(IoC, Port, XM_RX_CNT_EV, &RegVal);
Status |= (SK_U64)RegVal << 32;
}
if ((IStatus & XM_IS_TXC_OV) != 0) {
XM_IN32(IoC, Port, XM_TX_CNT_EV, &RegVal);
Status |= (SK_U64)RegVal;
}
*pStatus = Status;
return(0);
} /* SkXmOverflowStatus */
#endif /* GENESIS */
#ifdef YUKON
/******************************************************************************
*
* SkGmUpdateStats() - Force the GMAC to output the current statistic
*
* Description:
* Empty function for GMAC. Statistic data is accessible in direct way.
*
* Returns:
* 0: success
* 1: something went wrong
*/
int SkGmUpdateStats(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
unsigned int Port) /* Port Index (MAC_1 + n) */
{
return(0);
}
/******************************************************************************
*
* SkGmMacStatistic() - Get GMAC counter value
*
* Description:
* Gets the 32bit counter value. Except for the octet counters
* the lower 32bit are counted in hardware and the upper 32bit
* must be counted in software by monitoring counter overflow interrupts.
*
* Returns:
* 0: success
* 1: something went wrong
*/
int SkGmMacStatistic(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
unsigned int Port, /* Port Index (MAC_1 + n) */
SK_U16 StatAddr, /* MIB counter base address */
SK_U32 SK_FAR *pVal) /* ptr to return statistic value */
{
if ((StatAddr < GM_RXF_UC_OK) || (StatAddr > GM_TXE_FIFO_UR)) {
SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E022, SKERR_HWI_E022MSG);
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
("SkGmMacStat: wrong MIB counter 0x%04X\n", StatAddr));
return(1);
}
GM_IN32(IoC, Port, StatAddr, pVal);
return(0);
} /* SkGmMacStatistic */
/******************************************************************************
*
* SkGmResetCounter() - Clear MAC statistic counter
*
* Description:
* Force GMAC to clear its statistic counter.
*
* Returns:
* 0: success
* 1: something went wrong
*/
int SkGmResetCounter(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
unsigned int Port) /* Port Index (MAC_1 + n) */
{
SK_U16 Reg; /* Phy Address Register */
SK_U16 Word;
int i;
GM_IN16(IoC, Port, GM_PHY_ADDR, &Reg);
/* set MIB Clear Counter Mode */
GM_OUT16(IoC, Port, GM_PHY_ADDR, Reg | GM_PAR_MIB_CLR);
/* read all MIB Counters with Clear Mode set */
for (i = 0; i < GM_MIB_CNT_SIZE; i++) {
/* the reset is performed only when the lower 16 bits are read */
GM_IN16(IoC, Port, GM_MIB_CNT_BASE + 8*i, &Word);
}
/* clear MIB Clear Counter Mode */
GM_OUT16(IoC, Port, GM_PHY_ADDR, Reg);
return(0);
} /* SkGmResetCounter */
/******************************************************************************
*
* SkGmOverflowStatus() - Gets the status of counter overflow interrupt
*
* Description:
* Checks the source causing an counter overflow interrupt. On success the
* resulting counter overflow status is written to <pStatus>, whereas the
* the following bit coding is used:
* 63:56 - unused
* 55:48 - TxRx interrupt register bit7:0
* 32:47 - Rx interrupt register
* 31:24 - unused
* 23:16 - TxRx interrupt register bit15:8
* 15:0 - Tx interrupt register
*
* Returns:
* 0: success
* 1: something went wrong
*/
int SkGmOverflowStatus(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
unsigned int Port, /* Port Index (MAC_1 + n) */
SK_U16 IStatus, /* Interupt Status from MAC */
SK_U64 SK_FAR *pStatus) /* ptr for return overflow status value */
{
SK_U64 Status; /* Overflow status */
SK_U16 RegVal;
Status = 0;
if ((IStatus & GM_IS_RX_CO_OV) != 0) {
/* this register is self-clearing after read */
GM_IN16(IoC, Port, GM_RX_IRQ_SRC, &RegVal);
Status |= (SK_U64)RegVal << 32;
}
if ((IStatus & GM_IS_TX_CO_OV) != 0) {
/* this register is self-clearing after read */
GM_IN16(IoC, Port, GM_TX_IRQ_SRC, &RegVal);
Status |= (SK_U64)RegVal;
}
/* this register is self-clearing after read */
GM_IN16(IoC, Port, GM_TR_IRQ_SRC, &RegVal);
/* Rx overflow interrupt register bits (LoByte)*/
Status |= (SK_U64)((SK_U8)RegVal) << 48;
/* Tx overflow interrupt register bits (HiByte)*/
Status |= (SK_U64)(RegVal >> 8) << 16;
*pStatus = Status;
return(0);
} /* SkGmOverflowStatus */
#ifndef SK_SLIM
/******************************************************************************
*
* SkGmCableDiagStatus() - Starts / Gets status of cable diagnostic test
*
* Description:
* starts the cable diagnostic test if 'StartTest' is true
* gets the results if 'StartTest' is true
*
* NOTE: this test is meaningful only when link is down
*
* Returns:
* 0: success
* 1: no YUKON copper
* 2: test in progress
*/
int SkGmCableDiagStatus(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port, /* Port Index (MAC_1 + n) */
SK_BOOL StartTest) /* flag for start / get result */
{
int i;
SK_U16 RegVal;
SK_GEPORT *pPrt;
pPrt = &pAC->GIni.GP[Port];
if (pPrt->PhyType != SK_PHY_MARV_COPPER) {
return(1);
}
if (StartTest) {
/* only start the cable test */
if ((pPrt->PhyId1 & PHY_I1_REV_MSK) < 4) {
/* apply TDR workaround from Marvell */
SkGmPhyWrite(pAC, IoC, Port, 29, 0x001e);
SkGmPhyWrite(pAC, IoC, Port, 30, 0xcc00);
SkGmPhyWrite(pAC, IoC, Port, 30, 0xc800);
SkGmPhyWrite(pAC, IoC, Port, 30, 0xc400);
SkGmPhyWrite(pAC, IoC, Port, 30, 0xc000);
SkGmPhyWrite(pAC, IoC, Port, 30, 0xc100);
}
/* set address to 0 for MDI[0] */
SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_EXT_ADR, 0);
/* Read Cable Diagnostic Reg */
SkGmPhyRead(pAC, IoC, Port, PHY_MARV_CABLE_DIAG, &RegVal);
/* start Cable Diagnostic Test */
SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_CABLE_DIAG,
(SK_U16)(RegVal | PHY_M_CABD_ENA_TEST));
return(0);
}
/* Read Cable Diagnostic Reg */
SkGmPhyRead(pAC, IoC, Port, PHY_MARV_CABLE_DIAG, &RegVal);
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
("PHY Cable Diag.=0x%04X\n", RegVal));
if ((RegVal & PHY_M_CABD_ENA_TEST) != 0) {
/* test is running */
return(2);
}
/* get the test results */
for (i = 0; i < 4; i++) {
/* set address to i for MDI[i] */
SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_EXT_ADR, (SK_U16)i);
/* get Cable Diagnostic values */
SkGmPhyRead(pAC, IoC, Port, PHY_MARV_CABLE_DIAG, &RegVal);
pPrt->PMdiPairLen[i] = (SK_U8)(RegVal & PHY_M_CABD_DIST_MSK);
pPrt->PMdiPairSts[i] = (SK_U8)((RegVal & PHY_M_CABD_STAT_MSK) >> 13);
}
return(0);
} /* SkGmCableDiagStatus */
#endif /* !SK_SLIM */
#endif /* YUKON */
/* End of file */
View Git Blame Copy Permalink