kevin/linux
1
Fork 0
Code
ed3f909546
linux/arch/arm/mach-omap2/omap_twl.c
Thara Gopinath 7bc3ed9ae6 OMAP4: Register voltage PMIC parameters with the voltage layer 
TWL6030 is the power IC used along with OMAP4 in OMAP4 SDPs,
blaze boards and panda boards. This patch registers the OMAP4
PMIC specific information with the voltage layer.
This also involves implementing a different formula for
voltage to vsel and vsel to voltage calculations from
TWL4030.

Signed-off-by: Thara Gopinath <thara@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-22 14:31:45 -08:00

278 lines
8.1 KiB
C
Raw Blame History

/**
* OMAP and TWL PMIC specific intializations.
*
* Copyright (C) 2010 Texas Instruments Incorporated.
* Thara Gopinath
* Copyright (C) 2009 Texas Instruments Incorporated.
* Nishanth Menon
* Copyright (C) 2009 Nokia Corporation
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/err.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/i2c/twl.h>
#include <plat/voltage.h>
#define OMAP3_SRI2C_SLAVE_ADDR 0x12
#define OMAP3_VDD_MPU_SR_CONTROL_REG 0x00
#define OMAP3_VDD_CORE_SR_CONTROL_REG 0x01
#define OMAP3_VP_CONFIG_ERROROFFSET 0x00
#define OMAP3_VP_VSTEPMIN_VSTEPMIN 0x1
#define OMAP3_VP_VSTEPMAX_VSTEPMAX 0x04
#define OMAP3_VP_VLIMITTO_TIMEOUT_US 200
#define OMAP3430_VP1_VLIMITTO_VDDMIN 0x14
#define OMAP3430_VP1_VLIMITTO_VDDMAX 0x42
#define OMAP3430_VP2_VLIMITTO_VDDMIN 0x18
#define OMAP3430_VP2_VLIMITTO_VDDMAX 0x2c
#define OMAP3630_VP1_VLIMITTO_VDDMIN 0x18
#define OMAP3630_VP1_VLIMITTO_VDDMAX 0x3c
#define OMAP3630_VP2_VLIMITTO_VDDMIN 0x18
#define OMAP3630_VP2_VLIMITTO_VDDMAX 0x30
#define OMAP4_SRI2C_SLAVE_ADDR 0x12
#define OMAP4_VDD_MPU_SR_VOLT_REG 0x55
#define OMAP4_VDD_IVA_SR_VOLT_REG 0x5B
#define OMAP4_VDD_CORE_SR_VOLT_REG 0x61
#define OMAP4_VP_CONFIG_ERROROFFSET 0x00
#define OMAP4_VP_VSTEPMIN_VSTEPMIN 0x01
#define OMAP4_VP_VSTEPMAX_VSTEPMAX 0x04
#define OMAP4_VP_VLIMITTO_TIMEOUT_US 200
#define OMAP4_VP_MPU_VLIMITTO_VDDMIN 0xA
#define OMAP4_VP_MPU_VLIMITTO_VDDMAX 0x39
#define OMAP4_VP_IVA_VLIMITTO_VDDMIN 0xA
#define OMAP4_VP_IVA_VLIMITTO_VDDMAX 0x2D
#define OMAP4_VP_CORE_VLIMITTO_VDDMIN 0xA
#define OMAP4_VP_CORE_VLIMITTO_VDDMAX 0x28
static bool is_offset_valid;
static u8 smps_offset;
#define REG_SMPS_OFFSET 0xE0
unsigned long twl4030_vsel_to_uv(const u8 vsel)
{
return (((vsel * 125) + 6000)) * 100;
}
u8 twl4030_uv_to_vsel(unsigned long uv)
{
return DIV_ROUND_UP(uv - 600000, 12500);
}
unsigned long twl6030_vsel_to_uv(const u8 vsel)
{
/*
* In TWL6030 depending on the value of SMPS_OFFSET
* efuse register the voltage range supported in
* standard mode can be either between 0.6V - 1.3V or
* 0.7V - 1.4V. In TWL6030 ES1.0 SMPS_OFFSET efuse
* is programmed to all 0's where as starting from
* TWL6030 ES1.1 the efuse is programmed to 1
*/
if (!is_offset_valid) {
twl_i2c_read_u8(TWL6030_MODULE_ID0, &smps_offset,
REG_SMPS_OFFSET);
is_offset_valid = true;
}
/*
* There is no specific formula for voltage to vsel
* conversion above 1.3V. There are special hardcoded
* values for voltages above 1.3V. Currently we are
* hardcoding only for 1.35 V which is used for 1GH OPP for
* OMAP4430.
*/
if (vsel == 0x3A)
return 1350000;
if (smps_offset & 0x8)
return ((((vsel - 1) * 125) + 7000)) * 100;
else
return ((((vsel - 1) * 125) + 6000)) * 100;
}
u8 twl6030_uv_to_vsel(unsigned long uv)
{
/*
* In TWL6030 depending on the value of SMPS_OFFSET
* efuse register the voltage range supported in
* standard mode can be either between 0.6V - 1.3V or
* 0.7V - 1.4V. In TWL6030 ES1.0 SMPS_OFFSET efuse
* is programmed to all 0's where as starting from
* TWL6030 ES1.1 the efuse is programmed to 1
*/
if (!is_offset_valid) {
twl_i2c_read_u8(TWL6030_MODULE_ID0, &smps_offset,
REG_SMPS_OFFSET);
is_offset_valid = true;
}
/*
* There is no specific formula for voltage to vsel
* conversion above 1.3V. There are special hardcoded
* values for voltages above 1.3V. Currently we are
* hardcoding only for 1.35 V which is used for 1GH OPP for
* OMAP4430.
*/
if (uv == 1350000)
return 0x3A;
if (smps_offset & 0x8)
return DIV_ROUND_UP(uv - 700000, 12500) + 1;
else
return DIV_ROUND_UP(uv - 600000, 12500) + 1;
}
static struct omap_volt_pmic_info omap3_mpu_volt_info = {
.slew_rate = 4000,
.step_size = 12500,
.on_volt = 1200000,
.onlp_volt = 1000000,
.ret_volt = 975000,
.off_volt = 600000,
.volt_setup_time = 0xfff,
.vp_erroroffset = OMAP3_VP_CONFIG_ERROROFFSET,
.vp_vstepmin = OMAP3_VP_VSTEPMIN_VSTEPMIN,
.vp_vstepmax = OMAP3_VP_VSTEPMAX_VSTEPMAX,
.vp_vddmin = OMAP3430_VP1_VLIMITTO_VDDMIN,
.vp_vddmax = OMAP3430_VP1_VLIMITTO_VDDMAX,
.vp_timeout_us = OMAP3_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP3_SRI2C_SLAVE_ADDR,
.pmic_reg = OMAP3_VDD_MPU_SR_CONTROL_REG,
.vsel_to_uv = twl4030_vsel_to_uv,
.uv_to_vsel = twl4030_uv_to_vsel,
};
static struct omap_volt_pmic_info omap3_core_volt_info = {
.slew_rate = 4000,
.step_size = 12500,
.on_volt = 1200000,
.onlp_volt = 1000000,
.ret_volt = 975000,
.off_volt = 600000,
.volt_setup_time = 0xfff,
.vp_erroroffset = OMAP3_VP_CONFIG_ERROROFFSET,
.vp_vstepmin = OMAP3_VP_VSTEPMIN_VSTEPMIN,
.vp_vstepmax = OMAP3_VP_VSTEPMAX_VSTEPMAX,
.vp_vddmin = OMAP3430_VP2_VLIMITTO_VDDMIN,
.vp_vddmax = OMAP3430_VP2_VLIMITTO_VDDMAX,
.vp_timeout_us = OMAP3_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP3_SRI2C_SLAVE_ADDR,
.pmic_reg = OMAP3_VDD_CORE_SR_CONTROL_REG,
.vsel_to_uv = twl4030_vsel_to_uv,
.uv_to_vsel = twl4030_uv_to_vsel,
};
static struct omap_volt_pmic_info omap4_mpu_volt_info = {
.slew_rate = 4000,
.step_size = 12500,
.on_volt = 1350000,
.onlp_volt = 1350000,
.ret_volt = 837500,
.off_volt = 600000,
.volt_setup_time = 0,
.vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
.vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX,
.vp_vddmin = OMAP4_VP_MPU_VLIMITTO_VDDMIN,
.vp_vddmax = OMAP4_VP_MPU_VLIMITTO_VDDMAX,
.vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR,
.pmic_reg = OMAP4_VDD_MPU_SR_VOLT_REG,
.vsel_to_uv = twl6030_vsel_to_uv,
.uv_to_vsel = twl6030_uv_to_vsel,
};
static struct omap_volt_pmic_info omap4_iva_volt_info = {
.slew_rate = 4000,
.step_size = 12500,
.on_volt = 1100000,
.onlp_volt = 1100000,
.ret_volt = 837500,
.off_volt = 600000,
.volt_setup_time = 0,
.vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
.vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX,
.vp_vddmin = OMAP4_VP_IVA_VLIMITTO_VDDMIN,
.vp_vddmax = OMAP4_VP_IVA_VLIMITTO_VDDMAX,
.vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR,
.pmic_reg = OMAP4_VDD_IVA_SR_VOLT_REG,
.vsel_to_uv = twl6030_vsel_to_uv,
.uv_to_vsel = twl6030_uv_to_vsel,
};
static struct omap_volt_pmic_info omap4_core_volt_info = {
.slew_rate = 4000,
.step_size = 12500,
.on_volt = 1100000,
.onlp_volt = 1100000,
.ret_volt = 837500,
.off_volt = 600000,
.volt_setup_time = 0,
.vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
.vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX,
.vp_vddmin = OMAP4_VP_CORE_VLIMITTO_VDDMIN,
.vp_vddmax = OMAP4_VP_CORE_VLIMITTO_VDDMAX,
.vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR,
.pmic_reg = OMAP4_VDD_CORE_SR_VOLT_REG,
.vsel_to_uv = twl6030_vsel_to_uv,
.uv_to_vsel = twl6030_uv_to_vsel,
};
int __init omap4_twl_init(void)
{
struct voltagedomain *voltdm;
if (!cpu_is_omap44xx())
return -ENODEV;
voltdm = omap_voltage_domain_lookup("mpu");
omap_voltage_register_pmic(voltdm, &omap4_mpu_volt_info);
voltdm = omap_voltage_domain_lookup("iva");
omap_voltage_register_pmic(voltdm, &omap4_iva_volt_info);
voltdm = omap_voltage_domain_lookup("core");
omap_voltage_register_pmic(voltdm, &omap4_core_volt_info);
return 0;
}
int __init omap3_twl_init(void)
{
struct voltagedomain *voltdm;
if (!cpu_is_omap34xx())
return -ENODEV;
if (cpu_is_omap3630()) {
omap3_mpu_volt_info.vp_vddmin = OMAP3630_VP1_VLIMITTO_VDDMIN;
omap3_mpu_volt_info.vp_vddmax = OMAP3630_VP1_VLIMITTO_VDDMAX;
omap3_core_volt_info.vp_vddmin = OMAP3630_VP2_VLIMITTO_VDDMIN;
omap3_core_volt_info.vp_vddmax = OMAP3630_VP2_VLIMITTO_VDDMAX;
}
voltdm = omap_voltage_domain_lookup("mpu");
omap_voltage_register_pmic(voltdm, &omap3_mpu_volt_info);
voltdm = omap_voltage_domain_lookup("core");
omap_voltage_register_pmic(voltdm, &omap3_core_volt_info);
return 0;
}
View Git Blame Copy Permalink