d75c1084db
Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Chris Ball <cjb@laptop.org>
1146 lines
27 KiB
C
1146 lines
27 KiB
C
/* linux/drivers/mmc/host/sdhci-pci.c - SDHCI on PCI bus interface
|
|
*
|
|
* Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or (at
|
|
* your option) any later version.
|
|
*
|
|
* Thanks to the following companies for their support:
|
|
*
|
|
* - JMicron (hardware and technical support)
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/highmem.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/device.h>
|
|
|
|
#include <linux/mmc/host.h>
|
|
|
|
#include <asm/scatterlist.h>
|
|
#include <asm/io.h>
|
|
|
|
#include "sdhci.h"
|
|
|
|
/*
|
|
* PCI registers
|
|
*/
|
|
|
|
#define PCI_SDHCI_IFPIO 0x00
|
|
#define PCI_SDHCI_IFDMA 0x01
|
|
#define PCI_SDHCI_IFVENDOR 0x02
|
|
|
|
#define PCI_SLOT_INFO 0x40 /* 8 bits */
|
|
#define PCI_SLOT_INFO_SLOTS(x) ((x >> 4) & 7)
|
|
#define PCI_SLOT_INFO_FIRST_BAR_MASK 0x07
|
|
|
|
#define MAX_SLOTS 8
|
|
|
|
struct sdhci_pci_chip;
|
|
struct sdhci_pci_slot;
|
|
|
|
struct sdhci_pci_fixes {
|
|
unsigned int quirks;
|
|
|
|
int (*probe)(struct sdhci_pci_chip*);
|
|
|
|
int (*probe_slot)(struct sdhci_pci_slot*);
|
|
void (*remove_slot)(struct sdhci_pci_slot*, int);
|
|
|
|
int (*suspend)(struct sdhci_pci_chip*,
|
|
pm_message_t);
|
|
int (*resume)(struct sdhci_pci_chip*);
|
|
};
|
|
|
|
struct sdhci_pci_slot {
|
|
struct sdhci_pci_chip *chip;
|
|
struct sdhci_host *host;
|
|
|
|
int pci_bar;
|
|
};
|
|
|
|
struct sdhci_pci_chip {
|
|
struct pci_dev *pdev;
|
|
|
|
unsigned int quirks;
|
|
const struct sdhci_pci_fixes *fixes;
|
|
|
|
int num_slots; /* Slots on controller */
|
|
struct sdhci_pci_slot *slots[MAX_SLOTS]; /* Pointers to host slots */
|
|
};
|
|
|
|
|
|
/*****************************************************************************\
|
|
* *
|
|
* Hardware specific quirk handling *
|
|
* *
|
|
\*****************************************************************************/
|
|
|
|
static int ricoh_probe(struct sdhci_pci_chip *chip)
|
|
{
|
|
if (chip->pdev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG ||
|
|
chip->pdev->subsystem_vendor == PCI_VENDOR_ID_SONY)
|
|
chip->quirks |= SDHCI_QUIRK_NO_CARD_NO_RESET;
|
|
return 0;
|
|
}
|
|
|
|
static int ricoh_mmc_probe_slot(struct sdhci_pci_slot *slot)
|
|
{
|
|
slot->host->caps =
|
|
((0x21 << SDHCI_TIMEOUT_CLK_SHIFT)
|
|
& SDHCI_TIMEOUT_CLK_MASK) |
|
|
|
|
((0x21 << SDHCI_CLOCK_BASE_SHIFT)
|
|
& SDHCI_CLOCK_BASE_MASK) |
|
|
|
|
SDHCI_TIMEOUT_CLK_UNIT |
|
|
SDHCI_CAN_VDD_330 |
|
|
SDHCI_CAN_DO_SDMA;
|
|
return 0;
|
|
}
|
|
|
|
static int ricoh_mmc_resume(struct sdhci_pci_chip *chip)
|
|
{
|
|
/* Apply a delay to allow controller to settle */
|
|
/* Otherwise it becomes confused if card state changed
|
|
during suspend */
|
|
msleep(500);
|
|
return 0;
|
|
}
|
|
|
|
static const struct sdhci_pci_fixes sdhci_ricoh = {
|
|
.probe = ricoh_probe,
|
|
.quirks = SDHCI_QUIRK_32BIT_DMA_ADDR |
|
|
SDHCI_QUIRK_FORCE_DMA |
|
|
SDHCI_QUIRK_CLOCK_BEFORE_RESET,
|
|
};
|
|
|
|
static const struct sdhci_pci_fixes sdhci_ricoh_mmc = {
|
|
.probe_slot = ricoh_mmc_probe_slot,
|
|
.resume = ricoh_mmc_resume,
|
|
.quirks = SDHCI_QUIRK_32BIT_DMA_ADDR |
|
|
SDHCI_QUIRK_CLOCK_BEFORE_RESET |
|
|
SDHCI_QUIRK_NO_CARD_NO_RESET |
|
|
SDHCI_QUIRK_MISSING_CAPS
|
|
};
|
|
|
|
static const struct sdhci_pci_fixes sdhci_ene_712 = {
|
|
.quirks = SDHCI_QUIRK_SINGLE_POWER_WRITE |
|
|
SDHCI_QUIRK_BROKEN_DMA,
|
|
};
|
|
|
|
static const struct sdhci_pci_fixes sdhci_ene_714 = {
|
|
.quirks = SDHCI_QUIRK_SINGLE_POWER_WRITE |
|
|
SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS |
|
|
SDHCI_QUIRK_BROKEN_DMA,
|
|
};
|
|
|
|
static const struct sdhci_pci_fixes sdhci_cafe = {
|
|
.quirks = SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER |
|
|
SDHCI_QUIRK_NO_BUSY_IRQ |
|
|
SDHCI_QUIRK_BROKEN_TIMEOUT_VAL,
|
|
};
|
|
|
|
/*
|
|
* ADMA operation is disabled for Moorestown platform due to
|
|
* hardware bugs.
|
|
*/
|
|
static int mrst_hc_probe(struct sdhci_pci_chip *chip)
|
|
{
|
|
/*
|
|
* slots number is fixed here for MRST as SDIO3/5 are never used and
|
|
* have hardware bugs.
|
|
*/
|
|
chip->num_slots = 1;
|
|
return 0;
|
|
}
|
|
|
|
static const struct sdhci_pci_fixes sdhci_intel_mrst_hc0 = {
|
|
.quirks = SDHCI_QUIRK_BROKEN_ADMA | SDHCI_QUIRK_NO_HISPD_BIT,
|
|
};
|
|
|
|
static const struct sdhci_pci_fixes sdhci_intel_mrst_hc1_hc2 = {
|
|
.quirks = SDHCI_QUIRK_BROKEN_ADMA | SDHCI_QUIRK_NO_HISPD_BIT,
|
|
.probe = mrst_hc_probe,
|
|
};
|
|
|
|
static const struct sdhci_pci_fixes sdhci_intel_mfd_sd = {
|
|
.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
|
|
};
|
|
|
|
static const struct sdhci_pci_fixes sdhci_intel_mfd_emmc_sdio = {
|
|
.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
|
|
};
|
|
|
|
/* O2Micro extra registers */
|
|
#define O2_SD_LOCK_WP 0xD3
|
|
#define O2_SD_MULTI_VCC3V 0xEE
|
|
#define O2_SD_CLKREQ 0xEC
|
|
#define O2_SD_CAPS 0xE0
|
|
#define O2_SD_ADMA1 0xE2
|
|
#define O2_SD_ADMA2 0xE7
|
|
#define O2_SD_INF_MOD 0xF1
|
|
|
|
static int o2_probe(struct sdhci_pci_chip *chip)
|
|
{
|
|
int ret;
|
|
u8 scratch;
|
|
|
|
switch (chip->pdev->device) {
|
|
case PCI_DEVICE_ID_O2_8220:
|
|
case PCI_DEVICE_ID_O2_8221:
|
|
case PCI_DEVICE_ID_O2_8320:
|
|
case PCI_DEVICE_ID_O2_8321:
|
|
/* This extra setup is required due to broken ADMA. */
|
|
ret = pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch);
|
|
if (ret)
|
|
return ret;
|
|
scratch &= 0x7f;
|
|
pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
|
|
|
|
/* Set Multi 3 to VCC3V# */
|
|
pci_write_config_byte(chip->pdev, O2_SD_MULTI_VCC3V, 0x08);
|
|
|
|
/* Disable CLK_REQ# support after media DET */
|
|
ret = pci_read_config_byte(chip->pdev, O2_SD_CLKREQ, &scratch);
|
|
if (ret)
|
|
return ret;
|
|
scratch |= 0x20;
|
|
pci_write_config_byte(chip->pdev, O2_SD_CLKREQ, scratch);
|
|
|
|
/* Choose capabilities, enable SDMA. We have to write 0x01
|
|
* to the capabilities register first to unlock it.
|
|
*/
|
|
ret = pci_read_config_byte(chip->pdev, O2_SD_CAPS, &scratch);
|
|
if (ret)
|
|
return ret;
|
|
scratch |= 0x01;
|
|
pci_write_config_byte(chip->pdev, O2_SD_CAPS, scratch);
|
|
pci_write_config_byte(chip->pdev, O2_SD_CAPS, 0x73);
|
|
|
|
/* Disable ADMA1/2 */
|
|
pci_write_config_byte(chip->pdev, O2_SD_ADMA1, 0x39);
|
|
pci_write_config_byte(chip->pdev, O2_SD_ADMA2, 0x08);
|
|
|
|
/* Disable the infinite transfer mode */
|
|
ret = pci_read_config_byte(chip->pdev, O2_SD_INF_MOD, &scratch);
|
|
if (ret)
|
|
return ret;
|
|
scratch |= 0x08;
|
|
pci_write_config_byte(chip->pdev, O2_SD_INF_MOD, scratch);
|
|
|
|
/* Lock WP */
|
|
ret = pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch);
|
|
if (ret)
|
|
return ret;
|
|
scratch |= 0x80;
|
|
pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int jmicron_pmos(struct sdhci_pci_chip *chip, int on)
|
|
{
|
|
u8 scratch;
|
|
int ret;
|
|
|
|
ret = pci_read_config_byte(chip->pdev, 0xAE, &scratch);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* Turn PMOS on [bit 0], set over current detection to 2.4 V
|
|
* [bit 1:2] and enable over current debouncing [bit 6].
|
|
*/
|
|
if (on)
|
|
scratch |= 0x47;
|
|
else
|
|
scratch &= ~0x47;
|
|
|
|
ret = pci_write_config_byte(chip->pdev, 0xAE, scratch);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int jmicron_probe(struct sdhci_pci_chip *chip)
|
|
{
|
|
int ret;
|
|
u16 mmcdev = 0;
|
|
|
|
if (chip->pdev->revision == 0) {
|
|
chip->quirks |= SDHCI_QUIRK_32BIT_DMA_ADDR |
|
|
SDHCI_QUIRK_32BIT_DMA_SIZE |
|
|
SDHCI_QUIRK_32BIT_ADMA_SIZE |
|
|
SDHCI_QUIRK_RESET_AFTER_REQUEST |
|
|
SDHCI_QUIRK_BROKEN_SMALL_PIO;
|
|
}
|
|
|
|
/*
|
|
* JMicron chips can have two interfaces to the same hardware
|
|
* in order to work around limitations in Microsoft's driver.
|
|
* We need to make sure we only bind to one of them.
|
|
*
|
|
* This code assumes two things:
|
|
*
|
|
* 1. The PCI code adds subfunctions in order.
|
|
*
|
|
* 2. The MMC interface has a lower subfunction number
|
|
* than the SD interface.
|
|
*/
|
|
if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_SD)
|
|
mmcdev = PCI_DEVICE_ID_JMICRON_JMB38X_MMC;
|
|
else if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB388_SD)
|
|
mmcdev = PCI_DEVICE_ID_JMICRON_JMB388_ESD;
|
|
|
|
if (mmcdev) {
|
|
struct pci_dev *sd_dev;
|
|
|
|
sd_dev = NULL;
|
|
while ((sd_dev = pci_get_device(PCI_VENDOR_ID_JMICRON,
|
|
mmcdev, sd_dev)) != NULL) {
|
|
if ((PCI_SLOT(chip->pdev->devfn) ==
|
|
PCI_SLOT(sd_dev->devfn)) &&
|
|
(chip->pdev->bus == sd_dev->bus))
|
|
break;
|
|
}
|
|
|
|
if (sd_dev) {
|
|
pci_dev_put(sd_dev);
|
|
dev_info(&chip->pdev->dev, "Refusing to bind to "
|
|
"secondary interface.\n");
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* JMicron chips need a bit of a nudge to enable the power
|
|
* output pins.
|
|
*/
|
|
ret = jmicron_pmos(chip, 1);
|
|
if (ret) {
|
|
dev_err(&chip->pdev->dev, "Failure enabling card power\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void jmicron_enable_mmc(struct sdhci_host *host, int on)
|
|
{
|
|
u8 scratch;
|
|
|
|
scratch = readb(host->ioaddr + 0xC0);
|
|
|
|
if (on)
|
|
scratch |= 0x01;
|
|
else
|
|
scratch &= ~0x01;
|
|
|
|
writeb(scratch, host->ioaddr + 0xC0);
|
|
}
|
|
|
|
static int jmicron_probe_slot(struct sdhci_pci_slot *slot)
|
|
{
|
|
if (slot->chip->pdev->revision == 0) {
|
|
u16 version;
|
|
|
|
version = readl(slot->host->ioaddr + SDHCI_HOST_VERSION);
|
|
version = (version & SDHCI_VENDOR_VER_MASK) >>
|
|
SDHCI_VENDOR_VER_SHIFT;
|
|
|
|
/*
|
|
* Older versions of the chip have lots of nasty glitches
|
|
* in the ADMA engine. It's best just to avoid it
|
|
* completely.
|
|
*/
|
|
if (version < 0xAC)
|
|
slot->host->quirks |= SDHCI_QUIRK_BROKEN_ADMA;
|
|
}
|
|
|
|
/* JM388 MMC doesn't support 1.8V while SD supports it */
|
|
if (slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB388_ESD) {
|
|
slot->host->ocr_avail_sd = MMC_VDD_32_33 | MMC_VDD_33_34 |
|
|
MMC_VDD_29_30 | MMC_VDD_30_31 |
|
|
MMC_VDD_165_195; /* allow 1.8V */
|
|
slot->host->ocr_avail_mmc = MMC_VDD_32_33 | MMC_VDD_33_34 |
|
|
MMC_VDD_29_30 | MMC_VDD_30_31; /* no 1.8V for MMC */
|
|
}
|
|
|
|
/*
|
|
* The secondary interface requires a bit set to get the
|
|
* interrupts.
|
|
*/
|
|
if (slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC ||
|
|
slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB388_ESD)
|
|
jmicron_enable_mmc(slot->host, 1);
|
|
|
|
slot->host->mmc->caps |= MMC_CAP_BUS_WIDTH_TEST;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void jmicron_remove_slot(struct sdhci_pci_slot *slot, int dead)
|
|
{
|
|
if (dead)
|
|
return;
|
|
|
|
if (slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC ||
|
|
slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB388_ESD)
|
|
jmicron_enable_mmc(slot->host, 0);
|
|
}
|
|
|
|
static int jmicron_suspend(struct sdhci_pci_chip *chip, pm_message_t state)
|
|
{
|
|
int i;
|
|
|
|
if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC ||
|
|
chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB388_ESD) {
|
|
for (i = 0;i < chip->num_slots;i++)
|
|
jmicron_enable_mmc(chip->slots[i]->host, 0);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int jmicron_resume(struct sdhci_pci_chip *chip)
|
|
{
|
|
int ret, i;
|
|
|
|
if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC ||
|
|
chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB388_ESD) {
|
|
for (i = 0;i < chip->num_slots;i++)
|
|
jmicron_enable_mmc(chip->slots[i]->host, 1);
|
|
}
|
|
|
|
ret = jmicron_pmos(chip, 1);
|
|
if (ret) {
|
|
dev_err(&chip->pdev->dev, "Failure enabling card power\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct sdhci_pci_fixes sdhci_o2 = {
|
|
.probe = o2_probe,
|
|
};
|
|
|
|
static const struct sdhci_pci_fixes sdhci_jmicron = {
|
|
.probe = jmicron_probe,
|
|
|
|
.probe_slot = jmicron_probe_slot,
|
|
.remove_slot = jmicron_remove_slot,
|
|
|
|
.suspend = jmicron_suspend,
|
|
.resume = jmicron_resume,
|
|
};
|
|
|
|
/* SysKonnect CardBus2SDIO extra registers */
|
|
#define SYSKT_CTRL 0x200
|
|
#define SYSKT_RDFIFO_STAT 0x204
|
|
#define SYSKT_WRFIFO_STAT 0x208
|
|
#define SYSKT_POWER_DATA 0x20c
|
|
#define SYSKT_POWER_330 0xef
|
|
#define SYSKT_POWER_300 0xf8
|
|
#define SYSKT_POWER_184 0xcc
|
|
#define SYSKT_POWER_CMD 0x20d
|
|
#define SYSKT_POWER_START (1 << 7)
|
|
#define SYSKT_POWER_STATUS 0x20e
|
|
#define SYSKT_POWER_STATUS_OK (1 << 0)
|
|
#define SYSKT_BOARD_REV 0x210
|
|
#define SYSKT_CHIP_REV 0x211
|
|
#define SYSKT_CONF_DATA 0x212
|
|
#define SYSKT_CONF_DATA_1V8 (1 << 2)
|
|
#define SYSKT_CONF_DATA_2V5 (1 << 1)
|
|
#define SYSKT_CONF_DATA_3V3 (1 << 0)
|
|
|
|
static int syskt_probe(struct sdhci_pci_chip *chip)
|
|
{
|
|
if ((chip->pdev->class & 0x0000FF) == PCI_SDHCI_IFVENDOR) {
|
|
chip->pdev->class &= ~0x0000FF;
|
|
chip->pdev->class |= PCI_SDHCI_IFDMA;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int syskt_probe_slot(struct sdhci_pci_slot *slot)
|
|
{
|
|
int tm, ps;
|
|
|
|
u8 board_rev = readb(slot->host->ioaddr + SYSKT_BOARD_REV);
|
|
u8 chip_rev = readb(slot->host->ioaddr + SYSKT_CHIP_REV);
|
|
dev_info(&slot->chip->pdev->dev, "SysKonnect CardBus2SDIO, "
|
|
"board rev %d.%d, chip rev %d.%d\n",
|
|
board_rev >> 4, board_rev & 0xf,
|
|
chip_rev >> 4, chip_rev & 0xf);
|
|
if (chip_rev >= 0x20)
|
|
slot->host->quirks |= SDHCI_QUIRK_FORCE_DMA;
|
|
|
|
writeb(SYSKT_POWER_330, slot->host->ioaddr + SYSKT_POWER_DATA);
|
|
writeb(SYSKT_POWER_START, slot->host->ioaddr + SYSKT_POWER_CMD);
|
|
udelay(50);
|
|
tm = 10; /* Wait max 1 ms */
|
|
do {
|
|
ps = readw(slot->host->ioaddr + SYSKT_POWER_STATUS);
|
|
if (ps & SYSKT_POWER_STATUS_OK)
|
|
break;
|
|
udelay(100);
|
|
} while (--tm);
|
|
if (!tm) {
|
|
dev_err(&slot->chip->pdev->dev,
|
|
"power regulator never stabilized");
|
|
writeb(0, slot->host->ioaddr + SYSKT_POWER_CMD);
|
|
return -ENODEV;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct sdhci_pci_fixes sdhci_syskt = {
|
|
.quirks = SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER,
|
|
.probe = syskt_probe,
|
|
.probe_slot = syskt_probe_slot,
|
|
};
|
|
|
|
static int via_probe(struct sdhci_pci_chip *chip)
|
|
{
|
|
if (chip->pdev->revision == 0x10)
|
|
chip->quirks |= SDHCI_QUIRK_DELAY_AFTER_POWER;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct sdhci_pci_fixes sdhci_via = {
|
|
.probe = via_probe,
|
|
};
|
|
|
|
static const struct pci_device_id pci_ids[] __devinitdata = {
|
|
{
|
|
.vendor = PCI_VENDOR_ID_RICOH,
|
|
.device = PCI_DEVICE_ID_RICOH_R5C822,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.driver_data = (kernel_ulong_t)&sdhci_ricoh,
|
|
},
|
|
|
|
{
|
|
.vendor = PCI_VENDOR_ID_RICOH,
|
|
.device = 0x843,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.driver_data = (kernel_ulong_t)&sdhci_ricoh_mmc,
|
|
},
|
|
|
|
{
|
|
.vendor = PCI_VENDOR_ID_RICOH,
|
|
.device = 0xe822,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.driver_data = (kernel_ulong_t)&sdhci_ricoh_mmc,
|
|
},
|
|
|
|
{
|
|
.vendor = PCI_VENDOR_ID_ENE,
|
|
.device = PCI_DEVICE_ID_ENE_CB712_SD,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.driver_data = (kernel_ulong_t)&sdhci_ene_712,
|
|
},
|
|
|
|
{
|
|
.vendor = PCI_VENDOR_ID_ENE,
|
|
.device = PCI_DEVICE_ID_ENE_CB712_SD_2,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.driver_data = (kernel_ulong_t)&sdhci_ene_712,
|
|
},
|
|
|
|
{
|
|
.vendor = PCI_VENDOR_ID_ENE,
|
|
.device = PCI_DEVICE_ID_ENE_CB714_SD,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.driver_data = (kernel_ulong_t)&sdhci_ene_714,
|
|
},
|
|
|
|
{
|
|
.vendor = PCI_VENDOR_ID_ENE,
|
|
.device = PCI_DEVICE_ID_ENE_CB714_SD_2,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.driver_data = (kernel_ulong_t)&sdhci_ene_714,
|
|
},
|
|
|
|
{
|
|
.vendor = PCI_VENDOR_ID_MARVELL,
|
|
.device = PCI_DEVICE_ID_MARVELL_88ALP01_SD,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.driver_data = (kernel_ulong_t)&sdhci_cafe,
|
|
},
|
|
|
|
{
|
|
.vendor = PCI_VENDOR_ID_JMICRON,
|
|
.device = PCI_DEVICE_ID_JMICRON_JMB38X_SD,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.driver_data = (kernel_ulong_t)&sdhci_jmicron,
|
|
},
|
|
|
|
{
|
|
.vendor = PCI_VENDOR_ID_JMICRON,
|
|
.device = PCI_DEVICE_ID_JMICRON_JMB38X_MMC,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.driver_data = (kernel_ulong_t)&sdhci_jmicron,
|
|
},
|
|
|
|
{
|
|
.vendor = PCI_VENDOR_ID_JMICRON,
|
|
.device = PCI_DEVICE_ID_JMICRON_JMB388_SD,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.driver_data = (kernel_ulong_t)&sdhci_jmicron,
|
|
},
|
|
|
|
{
|
|
.vendor = PCI_VENDOR_ID_JMICRON,
|
|
.device = PCI_DEVICE_ID_JMICRON_JMB388_ESD,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.driver_data = (kernel_ulong_t)&sdhci_jmicron,
|
|
},
|
|
|
|
{
|
|
.vendor = PCI_VENDOR_ID_SYSKONNECT,
|
|
.device = 0x8000,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.driver_data = (kernel_ulong_t)&sdhci_syskt,
|
|
},
|
|
|
|
{
|
|
.vendor = PCI_VENDOR_ID_VIA,
|
|
.device = 0x95d0,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.driver_data = (kernel_ulong_t)&sdhci_via,
|
|
},
|
|
|
|
{
|
|
.vendor = PCI_VENDOR_ID_INTEL,
|
|
.device = PCI_DEVICE_ID_INTEL_MRST_SD0,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.driver_data = (kernel_ulong_t)&sdhci_intel_mrst_hc0,
|
|
},
|
|
|
|
{
|
|
.vendor = PCI_VENDOR_ID_INTEL,
|
|
.device = PCI_DEVICE_ID_INTEL_MRST_SD1,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.driver_data = (kernel_ulong_t)&sdhci_intel_mrst_hc1_hc2,
|
|
},
|
|
|
|
{
|
|
.vendor = PCI_VENDOR_ID_INTEL,
|
|
.device = PCI_DEVICE_ID_INTEL_MRST_SD2,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.driver_data = (kernel_ulong_t)&sdhci_intel_mrst_hc1_hc2,
|
|
},
|
|
|
|
{
|
|
.vendor = PCI_VENDOR_ID_INTEL,
|
|
.device = PCI_DEVICE_ID_INTEL_MFD_SD,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.driver_data = (kernel_ulong_t)&sdhci_intel_mfd_sd,
|
|
},
|
|
|
|
{
|
|
.vendor = PCI_VENDOR_ID_INTEL,
|
|
.device = PCI_DEVICE_ID_INTEL_MFD_SDIO1,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.driver_data = (kernel_ulong_t)&sdhci_intel_mfd_emmc_sdio,
|
|
},
|
|
|
|
{
|
|
.vendor = PCI_VENDOR_ID_INTEL,
|
|
.device = PCI_DEVICE_ID_INTEL_MFD_SDIO2,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.driver_data = (kernel_ulong_t)&sdhci_intel_mfd_emmc_sdio,
|
|
},
|
|
|
|
{
|
|
.vendor = PCI_VENDOR_ID_INTEL,
|
|
.device = PCI_DEVICE_ID_INTEL_MFD_EMMC0,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.driver_data = (kernel_ulong_t)&sdhci_intel_mfd_emmc_sdio,
|
|
},
|
|
|
|
{
|
|
.vendor = PCI_VENDOR_ID_INTEL,
|
|
.device = PCI_DEVICE_ID_INTEL_MFD_EMMC1,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.driver_data = (kernel_ulong_t)&sdhci_intel_mfd_emmc_sdio,
|
|
},
|
|
|
|
{
|
|
.vendor = PCI_VENDOR_ID_O2,
|
|
.device = PCI_DEVICE_ID_O2_8120,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.driver_data = (kernel_ulong_t)&sdhci_o2,
|
|
},
|
|
|
|
{
|
|
.vendor = PCI_VENDOR_ID_O2,
|
|
.device = PCI_DEVICE_ID_O2_8220,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.driver_data = (kernel_ulong_t)&sdhci_o2,
|
|
},
|
|
|
|
{
|
|
.vendor = PCI_VENDOR_ID_O2,
|
|
.device = PCI_DEVICE_ID_O2_8221,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.driver_data = (kernel_ulong_t)&sdhci_o2,
|
|
},
|
|
|
|
{
|
|
.vendor = PCI_VENDOR_ID_O2,
|
|
.device = PCI_DEVICE_ID_O2_8320,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.driver_data = (kernel_ulong_t)&sdhci_o2,
|
|
},
|
|
|
|
{
|
|
.vendor = PCI_VENDOR_ID_O2,
|
|
.device = PCI_DEVICE_ID_O2_8321,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.driver_data = (kernel_ulong_t)&sdhci_o2,
|
|
},
|
|
|
|
{ /* Generic SD host controller */
|
|
PCI_DEVICE_CLASS((PCI_CLASS_SYSTEM_SDHCI << 8), 0xFFFF00)
|
|
},
|
|
|
|
{ /* end: all zeroes */ },
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, pci_ids);
|
|
|
|
/*****************************************************************************\
|
|
* *
|
|
* SDHCI core callbacks *
|
|
* *
|
|
\*****************************************************************************/
|
|
|
|
static int sdhci_pci_enable_dma(struct sdhci_host *host)
|
|
{
|
|
struct sdhci_pci_slot *slot;
|
|
struct pci_dev *pdev;
|
|
int ret;
|
|
|
|
slot = sdhci_priv(host);
|
|
pdev = slot->chip->pdev;
|
|
|
|
if (((pdev->class & 0xFFFF00) == (PCI_CLASS_SYSTEM_SDHCI << 8)) &&
|
|
((pdev->class & 0x0000FF) != PCI_SDHCI_IFDMA) &&
|
|
(host->flags & SDHCI_USE_SDMA)) {
|
|
dev_warn(&pdev->dev, "Will use DMA mode even though HW "
|
|
"doesn't fully claim to support it.\n");
|
|
}
|
|
|
|
ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
|
|
if (ret)
|
|
return ret;
|
|
|
|
pci_set_master(pdev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct sdhci_ops sdhci_pci_ops = {
|
|
.enable_dma = sdhci_pci_enable_dma,
|
|
};
|
|
|
|
/*****************************************************************************\
|
|
* *
|
|
* Suspend/resume *
|
|
* *
|
|
\*****************************************************************************/
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
static int sdhci_pci_suspend (struct pci_dev *pdev, pm_message_t state)
|
|
{
|
|
struct sdhci_pci_chip *chip;
|
|
struct sdhci_pci_slot *slot;
|
|
mmc_pm_flag_t slot_pm_flags;
|
|
mmc_pm_flag_t pm_flags = 0;
|
|
int i, ret;
|
|
|
|
chip = pci_get_drvdata(pdev);
|
|
if (!chip)
|
|
return 0;
|
|
|
|
for (i = 0;i < chip->num_slots;i++) {
|
|
slot = chip->slots[i];
|
|
if (!slot)
|
|
continue;
|
|
|
|
ret = sdhci_suspend_host(slot->host, state);
|
|
|
|
if (ret) {
|
|
for (i--;i >= 0;i--)
|
|
sdhci_resume_host(chip->slots[i]->host);
|
|
return ret;
|
|
}
|
|
|
|
slot_pm_flags = slot->host->mmc->pm_flags;
|
|
if (slot_pm_flags & MMC_PM_WAKE_SDIO_IRQ)
|
|
sdhci_enable_irq_wakeups(slot->host);
|
|
|
|
pm_flags |= slot_pm_flags;
|
|
}
|
|
|
|
if (chip->fixes && chip->fixes->suspend) {
|
|
ret = chip->fixes->suspend(chip, state);
|
|
if (ret) {
|
|
for (i = chip->num_slots - 1;i >= 0;i--)
|
|
sdhci_resume_host(chip->slots[i]->host);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
pci_save_state(pdev);
|
|
if (pm_flags & MMC_PM_KEEP_POWER) {
|
|
if (pm_flags & MMC_PM_WAKE_SDIO_IRQ) {
|
|
pci_pme_active(pdev, true);
|
|
pci_enable_wake(pdev, PCI_D3hot, 1);
|
|
}
|
|
pci_set_power_state(pdev, PCI_D3hot);
|
|
} else {
|
|
pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
|
|
pci_disable_device(pdev);
|
|
pci_set_power_state(pdev, pci_choose_state(pdev, state));
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sdhci_pci_resume (struct pci_dev *pdev)
|
|
{
|
|
struct sdhci_pci_chip *chip;
|
|
struct sdhci_pci_slot *slot;
|
|
int i, ret;
|
|
|
|
chip = pci_get_drvdata(pdev);
|
|
if (!chip)
|
|
return 0;
|
|
|
|
pci_set_power_state(pdev, PCI_D0);
|
|
pci_restore_state(pdev);
|
|
ret = pci_enable_device(pdev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (chip->fixes && chip->fixes->resume) {
|
|
ret = chip->fixes->resume(chip);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
for (i = 0;i < chip->num_slots;i++) {
|
|
slot = chip->slots[i];
|
|
if (!slot)
|
|
continue;
|
|
|
|
ret = sdhci_resume_host(slot->host);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#else /* CONFIG_PM */
|
|
|
|
#define sdhci_pci_suspend NULL
|
|
#define sdhci_pci_resume NULL
|
|
|
|
#endif /* CONFIG_PM */
|
|
|
|
/*****************************************************************************\
|
|
* *
|
|
* Device probing/removal *
|
|
* *
|
|
\*****************************************************************************/
|
|
|
|
static struct sdhci_pci_slot * __devinit sdhci_pci_probe_slot(
|
|
struct pci_dev *pdev, struct sdhci_pci_chip *chip, int bar)
|
|
{
|
|
struct sdhci_pci_slot *slot;
|
|
struct sdhci_host *host;
|
|
|
|
resource_size_t addr;
|
|
|
|
int ret;
|
|
|
|
if (!(pci_resource_flags(pdev, bar) & IORESOURCE_MEM)) {
|
|
dev_err(&pdev->dev, "BAR %d is not iomem. Aborting.\n", bar);
|
|
return ERR_PTR(-ENODEV);
|
|
}
|
|
|
|
if (pci_resource_len(pdev, bar) != 0x100) {
|
|
dev_err(&pdev->dev, "Invalid iomem size. You may "
|
|
"experience problems.\n");
|
|
}
|
|
|
|
if ((pdev->class & 0x0000FF) == PCI_SDHCI_IFVENDOR) {
|
|
dev_err(&pdev->dev, "Vendor specific interface. Aborting.\n");
|
|
return ERR_PTR(-ENODEV);
|
|
}
|
|
|
|
if ((pdev->class & 0x0000FF) > PCI_SDHCI_IFVENDOR) {
|
|
dev_err(&pdev->dev, "Unknown interface. Aborting.\n");
|
|
return ERR_PTR(-ENODEV);
|
|
}
|
|
|
|
host = sdhci_alloc_host(&pdev->dev, sizeof(struct sdhci_pci_slot));
|
|
if (IS_ERR(host)) {
|
|
dev_err(&pdev->dev, "cannot allocate host\n");
|
|
return ERR_CAST(host);
|
|
}
|
|
|
|
slot = sdhci_priv(host);
|
|
|
|
slot->chip = chip;
|
|
slot->host = host;
|
|
slot->pci_bar = bar;
|
|
|
|
host->hw_name = "PCI";
|
|
host->ops = &sdhci_pci_ops;
|
|
host->quirks = chip->quirks;
|
|
|
|
host->irq = pdev->irq;
|
|
|
|
ret = pci_request_region(pdev, bar, mmc_hostname(host->mmc));
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "cannot request region\n");
|
|
goto free;
|
|
}
|
|
|
|
addr = pci_resource_start(pdev, bar);
|
|
host->ioaddr = pci_ioremap_bar(pdev, bar);
|
|
if (!host->ioaddr) {
|
|
dev_err(&pdev->dev, "failed to remap registers\n");
|
|
goto release;
|
|
}
|
|
|
|
if (chip->fixes && chip->fixes->probe_slot) {
|
|
ret = chip->fixes->probe_slot(slot);
|
|
if (ret)
|
|
goto unmap;
|
|
}
|
|
|
|
host->mmc->pm_caps = MMC_PM_KEEP_POWER | MMC_PM_WAKE_SDIO_IRQ;
|
|
|
|
ret = sdhci_add_host(host);
|
|
if (ret)
|
|
goto remove;
|
|
|
|
return slot;
|
|
|
|
remove:
|
|
if (chip->fixes && chip->fixes->remove_slot)
|
|
chip->fixes->remove_slot(slot, 0);
|
|
|
|
unmap:
|
|
iounmap(host->ioaddr);
|
|
|
|
release:
|
|
pci_release_region(pdev, bar);
|
|
|
|
free:
|
|
sdhci_free_host(host);
|
|
|
|
return ERR_PTR(ret);
|
|
}
|
|
|
|
static void sdhci_pci_remove_slot(struct sdhci_pci_slot *slot)
|
|
{
|
|
int dead;
|
|
u32 scratch;
|
|
|
|
dead = 0;
|
|
scratch = readl(slot->host->ioaddr + SDHCI_INT_STATUS);
|
|
if (scratch == (u32)-1)
|
|
dead = 1;
|
|
|
|
sdhci_remove_host(slot->host, dead);
|
|
|
|
if (slot->chip->fixes && slot->chip->fixes->remove_slot)
|
|
slot->chip->fixes->remove_slot(slot, dead);
|
|
|
|
pci_release_region(slot->chip->pdev, slot->pci_bar);
|
|
|
|
sdhci_free_host(slot->host);
|
|
}
|
|
|
|
static int __devinit sdhci_pci_probe(struct pci_dev *pdev,
|
|
const struct pci_device_id *ent)
|
|
{
|
|
struct sdhci_pci_chip *chip;
|
|
struct sdhci_pci_slot *slot;
|
|
|
|
u8 slots, rev, first_bar;
|
|
int ret, i;
|
|
|
|
BUG_ON(pdev == NULL);
|
|
BUG_ON(ent == NULL);
|
|
|
|
pci_read_config_byte(pdev, PCI_CLASS_REVISION, &rev);
|
|
|
|
dev_info(&pdev->dev, "SDHCI controller found [%04x:%04x] (rev %x)\n",
|
|
(int)pdev->vendor, (int)pdev->device, (int)rev);
|
|
|
|
ret = pci_read_config_byte(pdev, PCI_SLOT_INFO, &slots);
|
|
if (ret)
|
|
return ret;
|
|
|
|
slots = PCI_SLOT_INFO_SLOTS(slots) + 1;
|
|
dev_dbg(&pdev->dev, "found %d slot(s)\n", slots);
|
|
if (slots == 0)
|
|
return -ENODEV;
|
|
|
|
BUG_ON(slots > MAX_SLOTS);
|
|
|
|
ret = pci_read_config_byte(pdev, PCI_SLOT_INFO, &first_bar);
|
|
if (ret)
|
|
return ret;
|
|
|
|
first_bar &= PCI_SLOT_INFO_FIRST_BAR_MASK;
|
|
|
|
if (first_bar > 5) {
|
|
dev_err(&pdev->dev, "Invalid first BAR. Aborting.\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
ret = pci_enable_device(pdev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
chip = kzalloc(sizeof(struct sdhci_pci_chip), GFP_KERNEL);
|
|
if (!chip) {
|
|
ret = -ENOMEM;
|
|
goto err;
|
|
}
|
|
|
|
chip->pdev = pdev;
|
|
chip->fixes = (const struct sdhci_pci_fixes*)ent->driver_data;
|
|
if (chip->fixes)
|
|
chip->quirks = chip->fixes->quirks;
|
|
chip->num_slots = slots;
|
|
|
|
pci_set_drvdata(pdev, chip);
|
|
|
|
if (chip->fixes && chip->fixes->probe) {
|
|
ret = chip->fixes->probe(chip);
|
|
if (ret)
|
|
goto free;
|
|
}
|
|
|
|
slots = chip->num_slots; /* Quirk may have changed this */
|
|
|
|
for (i = 0;i < slots;i++) {
|
|
slot = sdhci_pci_probe_slot(pdev, chip, first_bar + i);
|
|
if (IS_ERR(slot)) {
|
|
for (i--;i >= 0;i--)
|
|
sdhci_pci_remove_slot(chip->slots[i]);
|
|
ret = PTR_ERR(slot);
|
|
goto free;
|
|
}
|
|
|
|
chip->slots[i] = slot;
|
|
}
|
|
|
|
return 0;
|
|
|
|
free:
|
|
pci_set_drvdata(pdev, NULL);
|
|
kfree(chip);
|
|
|
|
err:
|
|
pci_disable_device(pdev);
|
|
return ret;
|
|
}
|
|
|
|
static void __devexit sdhci_pci_remove(struct pci_dev *pdev)
|
|
{
|
|
int i;
|
|
struct sdhci_pci_chip *chip;
|
|
|
|
chip = pci_get_drvdata(pdev);
|
|
|
|
if (chip) {
|
|
for (i = 0;i < chip->num_slots; i++)
|
|
sdhci_pci_remove_slot(chip->slots[i]);
|
|
|
|
pci_set_drvdata(pdev, NULL);
|
|
kfree(chip);
|
|
}
|
|
|
|
pci_disable_device(pdev);
|
|
}
|
|
|
|
static struct pci_driver sdhci_driver = {
|
|
.name = "sdhci-pci",
|
|
.id_table = pci_ids,
|
|
.probe = sdhci_pci_probe,
|
|
.remove = __devexit_p(sdhci_pci_remove),
|
|
.suspend = sdhci_pci_suspend,
|
|
.resume = sdhci_pci_resume,
|
|
};
|
|
|
|
/*****************************************************************************\
|
|
* *
|
|
* Driver init/exit *
|
|
* *
|
|
\*****************************************************************************/
|
|
|
|
static int __init sdhci_drv_init(void)
|
|
{
|
|
return pci_register_driver(&sdhci_driver);
|
|
}
|
|
|
|
static void __exit sdhci_drv_exit(void)
|
|
{
|
|
pci_unregister_driver(&sdhci_driver);
|
|
}
|
|
|
|
module_init(sdhci_drv_init);
|
|
module_exit(sdhci_drv_exit);
|
|
|
|
MODULE_AUTHOR("Pierre Ossman <pierre@ossman.eu>");
|
|
MODULE_DESCRIPTION("Secure Digital Host Controller Interface PCI driver");
|
|
MODULE_LICENSE("GPL");
|