kevin/linux
1
Fork 0
Code
ea33a59802
linux/arch/arm/mach-omap2/pm-domain.c
Tony Lindgren 22a16f39e3 ARM: OMAP: Add initial 24xx suspend support 
This patch adds support for omap24xx power domains and
allows suspend to work.

Please note that for some reason core power domain still
does not seem to idle.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-06-26 16:16:18 -07:00

301 lines
9.0 KiB
C
Raw Blame History

/*
* linux/arch/arm/mach-omap2/pm-domain.c
*
* Power domain functions for OMAP2
*
* Copyright (C) 2006 Nokia Corporation
* Tony Lindgren <tony@atomide.com>
*
* Some code based on earlier OMAP2 sample PM code
* Copyright (C) 2005 Texas Instruments, Inc.
* Richard Woodruff <r-woodruff2@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <asm/io.h>
#include "prcm-regs.h"
/* Power domain offsets */
#define PM_MPU_OFFSET 0x100
#define PM_CORE_OFFSET 0x200
#define PM_GFX_OFFSET 0x300
#define PM_WKUP_OFFSET 0x400 /* Autoidle only */
#define PM_PLL_OFFSET 0x500 /* Autoidle only */
#define PM_DSP_OFFSET 0x800
#define PM_MDM_OFFSET 0xc00
/* Power domain wake-up dependency control register */
#define PM_WKDEP_OFFSET 0xc8
#define EN_MDM (1 << 5)
#define EN_WKUP (1 << 4)
#define EN_GFX (1 << 3)
#define EN_DSP (1 << 2)
#define EN_MPU (1 << 1)
#define EN_CORE (1 << 0)
/* Core power domain state transition control register */
#define PM_PWSTCTRL_OFFSET 0xe0
#define FORCESTATE (1 << 18) /* Only for DSP & GFX */
#define MEM4RETSTATE (1 << 6)
#define MEM3RETSTATE (1 << 5)
#define MEM2RETSTATE (1 << 4)
#define MEM1RETSTATE (1 << 3)
#define LOGICRETSTATE (1 << 2) /* Logic is retained */
#define POWERSTATE_OFF 0x3
#define POWERSTATE_RETENTION 0x1
#define POWERSTATE_ON 0x0
/* Power domain state register */
#define PM_PWSTST_OFFSET 0xe4
/* Hardware supervised state transition control register */
#define CM_CLKSTCTRL_OFFSET 0x48
#define AUTOSTAT_MPU (1 << 0) /* MPU */
#define AUTOSTAT_DSS (1 << 2) /* Core */
#define AUTOSTAT_L4 (1 << 1) /* Core */
#define AUTOSTAT_L3 (1 << 0) /* Core */
#define AUTOSTAT_GFX (1 << 0) /* GFX */
#define AUTOSTAT_IVA (1 << 8) /* 2420 IVA in DSP domain */
#define AUTOSTAT_DSP (1 << 0) /* DSP */
#define AUTOSTAT_MDM (1 << 0) /* MDM */
/* Automatic control of interface clock idling */
#define CM_AUTOIDLE1_OFFSET 0x30
#define CM_AUTOIDLE2_OFFSET 0x34 /* Core only */
#define CM_AUTOIDLE3_OFFSET 0x38 /* Core only */
#define CM_AUTOIDLE4_OFFSET 0x3c /* Core only */
#define AUTO_54M(x) (((x) & 0x3) << 6)
#define AUTO_96M(x) (((x) & 0x3) << 2)
#define AUTO_DPLL(x) (((x) & 0x3) << 0)
#define AUTO_STOPPED 0x3
#define AUTO_BYPASS_FAST 0x2 /* DPLL only */
#define AUTO_BYPASS_LOW_POWER 0x1 /* DPLL only */
#define AUTO_DISABLED 0x0
/* Voltage control PRCM_VOLTCTRL bits */
#define AUTO_EXTVOLT (1 << 15)
#define FORCE_EXTVOLT (1 << 14)
#define SETOFF_LEVEL(x) (((x) & 0x3) << 12)
#define MEMRETCTRL (1 << 8)
#define SETRET_LEVEL(x) (((x) & 0x3) << 6)
#define VOLT_LEVEL(x) (((x) & 0x3) << 0)
#define OMAP24XX_PRCM_VBASE IO_ADDRESS(OMAP24XX_PRCM_BASE)
#define prcm_readl(r) __raw_readl(OMAP24XX_PRCM_VBASE + (r))
#define prcm_writel(v, r) __raw_writel((v), OMAP24XX_PRCM_VBASE + (r))
static u32 pmdomain_get_wakeup_dependencies(int domain_offset)
{
return prcm_readl(domain_offset + PM_WKDEP_OFFSET);
}
static void pmdomain_set_wakeup_dependencies(u32 state, int domain_offset)
{
prcm_writel(state, domain_offset + PM_WKDEP_OFFSET);
}
static u32 pmdomain_get_powerstate(int domain_offset)
{
return prcm_readl(domain_offset + PM_PWSTCTRL_OFFSET);
}
static void pmdomain_set_powerstate(u32 state, int domain_offset)
{
prcm_writel(state, domain_offset + PM_PWSTCTRL_OFFSET);
}
static u32 pmdomain_get_clock_autocontrol(int domain_offset)
{
return prcm_readl(domain_offset + CM_CLKSTCTRL_OFFSET);
}
static void pmdomain_set_clock_autocontrol(u32 state, int domain_offset)
{
prcm_writel(state, domain_offset + CM_CLKSTCTRL_OFFSET);
}
static u32 pmdomain_get_clock_autoidle1(int domain_offset)
{
return prcm_readl(domain_offset + CM_AUTOIDLE1_OFFSET);
}
/* Core domain only */
static u32 pmdomain_get_clock_autoidle2(int domain_offset)
{
return prcm_readl(domain_offset + CM_AUTOIDLE2_OFFSET);
}
/* Core domain only */
static u32 pmdomain_get_clock_autoidle3(int domain_offset)
{
return prcm_readl(domain_offset + CM_AUTOIDLE3_OFFSET);
}
/* Core domain only */
static u32 pmdomain_get_clock_autoidle4(int domain_offset)
{
return prcm_readl(domain_offset + CM_AUTOIDLE4_OFFSET);
}
static void pmdomain_set_clock_autoidle1(u32 state, int domain_offset)
{
prcm_writel(state, CM_AUTOIDLE1_OFFSET + domain_offset);
}
/* Core domain only */
static void pmdomain_set_clock_autoidle2(u32 state, int domain_offset)
{
prcm_writel(state, CM_AUTOIDLE2_OFFSET + domain_offset);
}
/* Core domain only */
static void pmdomain_set_clock_autoidle3(u32 state, int domain_offset)
{
prcm_writel(state, CM_AUTOIDLE3_OFFSET + domain_offset);
}
/* Core domain only */
static void pmdomain_set_clock_autoidle4(u32 state, int domain_offset)
{
prcm_writel(state, CM_AUTOIDLE4_OFFSET + domain_offset);
}
/*
* Configures power management domains to idle clocks automatically.
*/
void pmdomain_set_autoidle(void)
{
u32 val;
/* Set PLL auto stop for 54M, 96M & DPLL */
pmdomain_set_clock_autoidle1(AUTO_54M(AUTO_STOPPED) |
AUTO_96M(AUTO_STOPPED) |
AUTO_DPLL(AUTO_STOPPED), PM_PLL_OFFSET);
/* External clock input control
* REVISIT: Should this be in clock framework?
*/
PRCM_CLKSRC_CTRL |= (0x3 << 3);
/* Configure number of 32KHz clock cycles for sys_clk */
PRCM_CLKSSETUP = 0x00ff;
/* Configure automatic voltage transition */
PRCM_VOLTSETUP = 0;
val = PRCM_VOLTCTRL;
val &= ~(SETOFF_LEVEL(0x3) | VOLT_LEVEL(0x3));
val |= SETOFF_LEVEL(1) | VOLT_LEVEL(1) | AUTO_EXTVOLT;
PRCM_VOLTCTRL = val;
/* Disable emulation tools functional clock */
PRCM_CLKEMUL_CTRL = 0x0;
/* Set core memory retention state */
val = pmdomain_get_powerstate(PM_CORE_OFFSET);
if (cpu_is_omap2420()) {
val &= ~(0x7 << 3);
val |= (MEM3RETSTATE | MEM2RETSTATE | MEM1RETSTATE);
} else {
val &= ~(0xf << 3);
val |= (MEM4RETSTATE | MEM3RETSTATE | MEM2RETSTATE |
MEM1RETSTATE);
}
pmdomain_set_powerstate(val, PM_CORE_OFFSET);
/* OCP interface smart idle. REVISIT: Enable autoidle bit0 ? */
val = SMS_SYSCONFIG;
val &= ~(0x3 << 3);
val |= (0x2 << 3) | (1 << 0);
SMS_SYSCONFIG |= val;
val = SDRC_SYSCONFIG;
val &= ~(0x3 << 3);
val |= (0x2 << 3);
SDRC_SYSCONFIG = val;
/* Configure L3 interface for smart idle.
* REVISIT: Enable autoidle bit0 ?
*/
val = GPMC_SYSCONFIG;
val &= ~(0x3 << 3);
val |= (0x2 << 3) | (1 << 0);
GPMC_SYSCONFIG = val;
pmdomain_set_powerstate(LOGICRETSTATE | POWERSTATE_RETENTION,
PM_MPU_OFFSET);
pmdomain_set_powerstate(POWERSTATE_RETENTION, PM_CORE_OFFSET);
if (!cpu_is_omap2420())
pmdomain_set_powerstate(POWERSTATE_RETENTION, PM_MDM_OFFSET);
/* Assume suspend function has saved the state for DSP and GFX */
pmdomain_set_powerstate(FORCESTATE | POWERSTATE_OFF, PM_DSP_OFFSET);
pmdomain_set_powerstate(FORCESTATE | POWERSTATE_OFF, PM_GFX_OFFSET);
#if 0
/* REVISIT: Internal USB needs special handling */
force_standby_usb();
if (cpu_is_omap2430())
force_hsmmc();
sdram_self_refresh_on_idle_req(1);
#endif
/* Enable clock auto control for all domains.
* Note that CORE domain includes also DSS, L4 & L3.
*/
pmdomain_set_clock_autocontrol(AUTOSTAT_MPU, PM_MPU_OFFSET);
pmdomain_set_clock_autocontrol(AUTOSTAT_GFX, PM_GFX_OFFSET);
pmdomain_set_clock_autocontrol(AUTOSTAT_DSS | AUTOSTAT_L4 | AUTOSTAT_L3,
PM_CORE_OFFSET);
if (cpu_is_omap2420())
pmdomain_set_clock_autocontrol(AUTOSTAT_IVA | AUTOSTAT_DSP,
PM_DSP_OFFSET);
else {
pmdomain_set_clock_autocontrol(AUTOSTAT_DSP, PM_DSP_OFFSET);
pmdomain_set_clock_autocontrol(AUTOSTAT_MDM, PM_MDM_OFFSET);
}
/* Enable clock autoidle for all domains */
pmdomain_set_clock_autoidle1(0x2, PM_DSP_OFFSET);
if (cpu_is_omap2420()) {
pmdomain_set_clock_autoidle1(0xfffffff9, PM_CORE_OFFSET);
pmdomain_set_clock_autoidle2(0x7, PM_CORE_OFFSET);
pmdomain_set_clock_autoidle1(0x3f, PM_WKUP_OFFSET);
} else {
pmdomain_set_clock_autoidle1(0xeafffff1, PM_CORE_OFFSET);
pmdomain_set_clock_autoidle2(0xfff, PM_CORE_OFFSET);
pmdomain_set_clock_autoidle1(0x7f, PM_WKUP_OFFSET);
pmdomain_set_clock_autoidle1(0x3, PM_MDM_OFFSET);
}
pmdomain_set_clock_autoidle3(0x7, PM_CORE_OFFSET);
pmdomain_set_clock_autoidle4(0x1f, PM_CORE_OFFSET);
}
/*
* Initializes power domains by removing wake-up dependencies and powering
* down DSP and GFX. Gets called from PM init. Note that DSP and IVA code
* must re-enable DSP and GFX when used.
*/
void __init pmdomain_init(void)
{
/* Remove all domain wakeup dependencies */
pmdomain_set_wakeup_dependencies(EN_WKUP | EN_CORE, PM_MPU_OFFSET);
pmdomain_set_wakeup_dependencies(0, PM_DSP_OFFSET);
pmdomain_set_wakeup_dependencies(0, PM_GFX_OFFSET);
pmdomain_set_wakeup_dependencies(EN_WKUP | EN_MPU, PM_CORE_OFFSET);
if (cpu_is_omap2430())
pmdomain_set_wakeup_dependencies(0, PM_MDM_OFFSET);
/* Power down DSP and GFX */
pmdomain_set_powerstate(POWERSTATE_OFF | FORCESTATE, PM_DSP_OFFSET);
pmdomain_set_powerstate(POWERSTATE_OFF | FORCESTATE, PM_GFX_OFFSET);
}
View Git Blame Copy Permalink