4ae26f46c9
This fixes up the port_rx_irq_mask() REIE flag definition as well as a debug printk blowing up on the SCSCR_INIT having gone away. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2080 lines
49 KiB
C
2080 lines
49 KiB
C
/*
|
|
* drivers/serial/sh-sci.c
|
|
*
|
|
* SuperH on-chip serial module support. (SCI with no FIFO / with FIFO)
|
|
*
|
|
* Copyright (C) 2002 - 2011 Paul Mundt
|
|
* Modified to support SH7720 SCIF. Markus Brunner, Mark Jonas (Jul 2007).
|
|
*
|
|
* based off of the old drivers/char/sh-sci.c by:
|
|
*
|
|
* Copyright (C) 1999, 2000 Niibe Yutaka
|
|
* Copyright (C) 2000 Sugioka Toshinobu
|
|
* Modified to support multiple serial ports. Stuart Menefy (May 2000).
|
|
* Modified to support SecureEdge. David McCullough (2002)
|
|
* Modified to support SH7300 SCIF. Takashi Kusuda (Jun 2003).
|
|
* Removed SH7300 support (Jul 2007).
|
|
*
|
|
* This file is subject to the terms and conditions of the GNU General Public
|
|
* License. See the file "COPYING" in the main directory of this archive
|
|
* for more details.
|
|
*/
|
|
#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
|
|
#define SUPPORT_SYSRQ
|
|
#endif
|
|
|
|
#undef DEBUG
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/tty_flip.h>
|
|
#include <linux/serial.h>
|
|
#include <linux/major.h>
|
|
#include <linux/string.h>
|
|
#include <linux/sysrq.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/console.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/serial_sci.h>
|
|
#include <linux/notifier.h>
|
|
#include <linux/cpufreq.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/ctype.h>
|
|
#include <linux/err.h>
|
|
#include <linux/list.h>
|
|
#include <linux/dmaengine.h>
|
|
#include <linux/scatterlist.h>
|
|
#include <linux/slab.h>
|
|
|
|
#ifdef CONFIG_SUPERH
|
|
#include <asm/sh_bios.h>
|
|
#endif
|
|
|
|
#ifdef CONFIG_H8300
|
|
#include <asm/gpio.h>
|
|
#endif
|
|
|
|
#include "sh-sci.h"
|
|
|
|
struct sci_port {
|
|
struct uart_port port;
|
|
|
|
/* Port type */
|
|
unsigned int type;
|
|
|
|
/* Port IRQs: ERI, RXI, TXI, BRI (optional) */
|
|
unsigned int irqs[SCIx_NR_IRQS];
|
|
|
|
/* Port enable callback */
|
|
void (*enable)(struct uart_port *port);
|
|
|
|
/* Port disable callback */
|
|
void (*disable)(struct uart_port *port);
|
|
|
|
/* Break timer */
|
|
struct timer_list break_timer;
|
|
int break_flag;
|
|
|
|
/* SCSCR initialization */
|
|
unsigned int scscr;
|
|
|
|
/* SCBRR calculation algo */
|
|
unsigned int scbrr_algo_id;
|
|
|
|
/* Interface clock */
|
|
struct clk *iclk;
|
|
/* Function clock */
|
|
struct clk *fclk;
|
|
|
|
struct list_head node;
|
|
|
|
struct dma_chan *chan_tx;
|
|
struct dma_chan *chan_rx;
|
|
|
|
#ifdef CONFIG_SERIAL_SH_SCI_DMA
|
|
struct device *dma_dev;
|
|
unsigned int slave_tx;
|
|
unsigned int slave_rx;
|
|
struct dma_async_tx_descriptor *desc_tx;
|
|
struct dma_async_tx_descriptor *desc_rx[2];
|
|
dma_cookie_t cookie_tx;
|
|
dma_cookie_t cookie_rx[2];
|
|
dma_cookie_t active_rx;
|
|
struct scatterlist sg_tx;
|
|
unsigned int sg_len_tx;
|
|
struct scatterlist sg_rx[2];
|
|
size_t buf_len_rx;
|
|
struct sh_dmae_slave param_tx;
|
|
struct sh_dmae_slave param_rx;
|
|
struct work_struct work_tx;
|
|
struct work_struct work_rx;
|
|
struct timer_list rx_timer;
|
|
unsigned int rx_timeout;
|
|
#endif
|
|
};
|
|
|
|
struct sh_sci_priv {
|
|
spinlock_t lock;
|
|
struct list_head ports;
|
|
struct notifier_block clk_nb;
|
|
};
|
|
|
|
/* Function prototypes */
|
|
static void sci_stop_tx(struct uart_port *port);
|
|
|
|
#define SCI_NPORTS CONFIG_SERIAL_SH_SCI_NR_UARTS
|
|
|
|
static struct sci_port sci_ports[SCI_NPORTS];
|
|
static struct uart_driver sci_uart_driver;
|
|
|
|
static inline struct sci_port *
|
|
to_sci_port(struct uart_port *uart)
|
|
{
|
|
return container_of(uart, struct sci_port, port);
|
|
}
|
|
|
|
#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_SH_SCI_CONSOLE)
|
|
|
|
#ifdef CONFIG_CONSOLE_POLL
|
|
static inline void handle_error(struct uart_port *port)
|
|
{
|
|
/* Clear error flags */
|
|
sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port));
|
|
}
|
|
|
|
static int sci_poll_get_char(struct uart_port *port)
|
|
{
|
|
unsigned short status;
|
|
int c;
|
|
|
|
do {
|
|
status = sci_in(port, SCxSR);
|
|
if (status & SCxSR_ERRORS(port)) {
|
|
handle_error(port);
|
|
continue;
|
|
}
|
|
break;
|
|
} while (1);
|
|
|
|
if (!(status & SCxSR_RDxF(port)))
|
|
return NO_POLL_CHAR;
|
|
|
|
c = sci_in(port, SCxRDR);
|
|
|
|
/* Dummy read */
|
|
sci_in(port, SCxSR);
|
|
sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
|
|
|
|
return c;
|
|
}
|
|
#endif
|
|
|
|
static void sci_poll_put_char(struct uart_port *port, unsigned char c)
|
|
{
|
|
unsigned short status;
|
|
|
|
do {
|
|
status = sci_in(port, SCxSR);
|
|
} while (!(status & SCxSR_TDxE(port)));
|
|
|
|
sci_out(port, SCxTDR, c);
|
|
sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port) & ~SCxSR_TEND(port));
|
|
}
|
|
#endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE */
|
|
|
|
#if defined(__H8300H__) || defined(__H8300S__)
|
|
static void sci_init_pins(struct uart_port *port, unsigned int cflag)
|
|
{
|
|
int ch = (port->mapbase - SMR0) >> 3;
|
|
|
|
/* set DDR regs */
|
|
H8300_GPIO_DDR(h8300_sci_pins[ch].port,
|
|
h8300_sci_pins[ch].rx,
|
|
H8300_GPIO_INPUT);
|
|
H8300_GPIO_DDR(h8300_sci_pins[ch].port,
|
|
h8300_sci_pins[ch].tx,
|
|
H8300_GPIO_OUTPUT);
|
|
|
|
/* tx mark output*/
|
|
H8300_SCI_DR(ch) |= h8300_sci_pins[ch].tx;
|
|
}
|
|
#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
|
|
static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
|
|
{
|
|
if (port->mapbase == 0xA4400000) {
|
|
__raw_writew(__raw_readw(PACR) & 0xffc0, PACR);
|
|
__raw_writew(__raw_readw(PBCR) & 0x0fff, PBCR);
|
|
} else if (port->mapbase == 0xA4410000)
|
|
__raw_writew(__raw_readw(PBCR) & 0xf003, PBCR);
|
|
}
|
|
#elif defined(CONFIG_CPU_SUBTYPE_SH7720) || defined(CONFIG_CPU_SUBTYPE_SH7721)
|
|
static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
|
|
{
|
|
unsigned short data;
|
|
|
|
if (cflag & CRTSCTS) {
|
|
/* enable RTS/CTS */
|
|
if (port->mapbase == 0xa4430000) { /* SCIF0 */
|
|
/* Clear PTCR bit 9-2; enable all scif pins but sck */
|
|
data = __raw_readw(PORT_PTCR);
|
|
__raw_writew((data & 0xfc03), PORT_PTCR);
|
|
} else if (port->mapbase == 0xa4438000) { /* SCIF1 */
|
|
/* Clear PVCR bit 9-2 */
|
|
data = __raw_readw(PORT_PVCR);
|
|
__raw_writew((data & 0xfc03), PORT_PVCR);
|
|
}
|
|
} else {
|
|
if (port->mapbase == 0xa4430000) { /* SCIF0 */
|
|
/* Clear PTCR bit 5-2; enable only tx and rx */
|
|
data = __raw_readw(PORT_PTCR);
|
|
__raw_writew((data & 0xffc3), PORT_PTCR);
|
|
} else if (port->mapbase == 0xa4438000) { /* SCIF1 */
|
|
/* Clear PVCR bit 5-2 */
|
|
data = __raw_readw(PORT_PVCR);
|
|
__raw_writew((data & 0xffc3), PORT_PVCR);
|
|
}
|
|
}
|
|
}
|
|
#elif defined(CONFIG_CPU_SH3)
|
|
/* For SH7705, SH7706, SH7707, SH7709, SH7709A, SH7729 */
|
|
static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
|
|
{
|
|
unsigned short data;
|
|
|
|
/* We need to set SCPCR to enable RTS/CTS */
|
|
data = __raw_readw(SCPCR);
|
|
/* Clear out SCP7MD1,0, SCP6MD1,0, SCP4MD1,0*/
|
|
__raw_writew(data & 0x0fcf, SCPCR);
|
|
|
|
if (!(cflag & CRTSCTS)) {
|
|
/* We need to set SCPCR to enable RTS/CTS */
|
|
data = __raw_readw(SCPCR);
|
|
/* Clear out SCP7MD1,0, SCP4MD1,0,
|
|
Set SCP6MD1,0 = {01} (output) */
|
|
__raw_writew((data & 0x0fcf) | 0x1000, SCPCR);
|
|
|
|
data = __raw_readb(SCPDR);
|
|
/* Set /RTS2 (bit6) = 0 */
|
|
__raw_writeb(data & 0xbf, SCPDR);
|
|
}
|
|
}
|
|
#elif defined(CONFIG_CPU_SUBTYPE_SH7722)
|
|
static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
|
|
{
|
|
unsigned short data;
|
|
|
|
if (port->mapbase == 0xffe00000) {
|
|
data = __raw_readw(PSCR);
|
|
data &= ~0x03cf;
|
|
if (!(cflag & CRTSCTS))
|
|
data |= 0x0340;
|
|
|
|
__raw_writew(data, PSCR);
|
|
}
|
|
}
|
|
#elif defined(CONFIG_CPU_SUBTYPE_SH7757) || \
|
|
defined(CONFIG_CPU_SUBTYPE_SH7763) || \
|
|
defined(CONFIG_CPU_SUBTYPE_SH7780) || \
|
|
defined(CONFIG_CPU_SUBTYPE_SH7785) || \
|
|
defined(CONFIG_CPU_SUBTYPE_SH7786) || \
|
|
defined(CONFIG_CPU_SUBTYPE_SHX3)
|
|
static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
|
|
{
|
|
if (!(cflag & CRTSCTS))
|
|
__raw_writew(0x0080, SCSPTR0); /* Set RTS = 1 */
|
|
}
|
|
#elif defined(CONFIG_CPU_SH4) && !defined(CONFIG_CPU_SH4A)
|
|
static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
|
|
{
|
|
if (!(cflag & CRTSCTS))
|
|
__raw_writew(0x0080, SCSPTR2); /* Set RTS = 1 */
|
|
}
|
|
#else
|
|
static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
|
|
{
|
|
/* Nothing to do */
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_CPU_SUBTYPE_SH7760) || \
|
|
defined(CONFIG_CPU_SUBTYPE_SH7780) || \
|
|
defined(CONFIG_CPU_SUBTYPE_SH7785) || \
|
|
defined(CONFIG_CPU_SUBTYPE_SH7786)
|
|
static int scif_txfill(struct uart_port *port)
|
|
{
|
|
return sci_in(port, SCTFDR) & 0xff;
|
|
}
|
|
|
|
static int scif_txroom(struct uart_port *port)
|
|
{
|
|
return SCIF_TXROOM_MAX - scif_txfill(port);
|
|
}
|
|
|
|
static int scif_rxfill(struct uart_port *port)
|
|
{
|
|
return sci_in(port, SCRFDR) & 0xff;
|
|
}
|
|
#elif defined(CONFIG_CPU_SUBTYPE_SH7763)
|
|
static int scif_txfill(struct uart_port *port)
|
|
{
|
|
if (port->mapbase == 0xffe00000 ||
|
|
port->mapbase == 0xffe08000)
|
|
/* SCIF0/1*/
|
|
return sci_in(port, SCTFDR) & 0xff;
|
|
else
|
|
/* SCIF2 */
|
|
return sci_in(port, SCFDR) >> 8;
|
|
}
|
|
|
|
static int scif_txroom(struct uart_port *port)
|
|
{
|
|
if (port->mapbase == 0xffe00000 ||
|
|
port->mapbase == 0xffe08000)
|
|
/* SCIF0/1*/
|
|
return SCIF_TXROOM_MAX - scif_txfill(port);
|
|
else
|
|
/* SCIF2 */
|
|
return SCIF2_TXROOM_MAX - scif_txfill(port);
|
|
}
|
|
|
|
static int scif_rxfill(struct uart_port *port)
|
|
{
|
|
if ((port->mapbase == 0xffe00000) ||
|
|
(port->mapbase == 0xffe08000)) {
|
|
/* SCIF0/1*/
|
|
return sci_in(port, SCRFDR) & 0xff;
|
|
} else {
|
|
/* SCIF2 */
|
|
return sci_in(port, SCFDR) & SCIF2_RFDC_MASK;
|
|
}
|
|
}
|
|
#elif defined(CONFIG_ARCH_SH7372)
|
|
static int scif_txfill(struct uart_port *port)
|
|
{
|
|
if (port->type == PORT_SCIFA)
|
|
return sci_in(port, SCFDR) >> 8;
|
|
else
|
|
return sci_in(port, SCTFDR);
|
|
}
|
|
|
|
static int scif_txroom(struct uart_port *port)
|
|
{
|
|
return port->fifosize - scif_txfill(port);
|
|
}
|
|
|
|
static int scif_rxfill(struct uart_port *port)
|
|
{
|
|
if (port->type == PORT_SCIFA)
|
|
return sci_in(port, SCFDR) & SCIF_RFDC_MASK;
|
|
else
|
|
return sci_in(port, SCRFDR);
|
|
}
|
|
#else
|
|
static int scif_txfill(struct uart_port *port)
|
|
{
|
|
return sci_in(port, SCFDR) >> 8;
|
|
}
|
|
|
|
static int scif_txroom(struct uart_port *port)
|
|
{
|
|
return SCIF_TXROOM_MAX - scif_txfill(port);
|
|
}
|
|
|
|
static int scif_rxfill(struct uart_port *port)
|
|
{
|
|
return sci_in(port, SCFDR) & SCIF_RFDC_MASK;
|
|
}
|
|
#endif
|
|
|
|
static int sci_txfill(struct uart_port *port)
|
|
{
|
|
return !(sci_in(port, SCxSR) & SCI_TDRE);
|
|
}
|
|
|
|
static int sci_txroom(struct uart_port *port)
|
|
{
|
|
return !sci_txfill(port);
|
|
}
|
|
|
|
static int sci_rxfill(struct uart_port *port)
|
|
{
|
|
return (sci_in(port, SCxSR) & SCxSR_RDxF(port)) != 0;
|
|
}
|
|
|
|
/* ********************************************************************** *
|
|
* the interrupt related routines *
|
|
* ********************************************************************** */
|
|
|
|
static void sci_transmit_chars(struct uart_port *port)
|
|
{
|
|
struct circ_buf *xmit = &port->state->xmit;
|
|
unsigned int stopped = uart_tx_stopped(port);
|
|
unsigned short status;
|
|
unsigned short ctrl;
|
|
int count;
|
|
|
|
status = sci_in(port, SCxSR);
|
|
if (!(status & SCxSR_TDxE(port))) {
|
|
ctrl = sci_in(port, SCSCR);
|
|
if (uart_circ_empty(xmit))
|
|
ctrl &= ~SCSCR_TIE;
|
|
else
|
|
ctrl |= SCSCR_TIE;
|
|
sci_out(port, SCSCR, ctrl);
|
|
return;
|
|
}
|
|
|
|
if (port->type == PORT_SCI)
|
|
count = sci_txroom(port);
|
|
else
|
|
count = scif_txroom(port);
|
|
|
|
do {
|
|
unsigned char c;
|
|
|
|
if (port->x_char) {
|
|
c = port->x_char;
|
|
port->x_char = 0;
|
|
} else if (!uart_circ_empty(xmit) && !stopped) {
|
|
c = xmit->buf[xmit->tail];
|
|
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
|
|
} else {
|
|
break;
|
|
}
|
|
|
|
sci_out(port, SCxTDR, c);
|
|
|
|
port->icount.tx++;
|
|
} while (--count > 0);
|
|
|
|
sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
|
|
|
|
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
|
|
uart_write_wakeup(port);
|
|
if (uart_circ_empty(xmit)) {
|
|
sci_stop_tx(port);
|
|
} else {
|
|
ctrl = sci_in(port, SCSCR);
|
|
|
|
if (port->type != PORT_SCI) {
|
|
sci_in(port, SCxSR); /* Dummy read */
|
|
sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
|
|
}
|
|
|
|
ctrl |= SCSCR_TIE;
|
|
sci_out(port, SCSCR, ctrl);
|
|
}
|
|
}
|
|
|
|
/* On SH3, SCIF may read end-of-break as a space->mark char */
|
|
#define STEPFN(c) ({int __c = (c); (((__c-1)|(__c)) == -1); })
|
|
|
|
static inline void sci_receive_chars(struct uart_port *port)
|
|
{
|
|
struct sci_port *sci_port = to_sci_port(port);
|
|
struct tty_struct *tty = port->state->port.tty;
|
|
int i, count, copied = 0;
|
|
unsigned short status;
|
|
unsigned char flag;
|
|
|
|
status = sci_in(port, SCxSR);
|
|
if (!(status & SCxSR_RDxF(port)))
|
|
return;
|
|
|
|
while (1) {
|
|
if (port->type == PORT_SCI)
|
|
count = sci_rxfill(port);
|
|
else
|
|
count = scif_rxfill(port);
|
|
|
|
/* Don't copy more bytes than there is room for in the buffer */
|
|
count = tty_buffer_request_room(tty, count);
|
|
|
|
/* If for any reason we can't copy more data, we're done! */
|
|
if (count == 0)
|
|
break;
|
|
|
|
if (port->type == PORT_SCI) {
|
|
char c = sci_in(port, SCxRDR);
|
|
if (uart_handle_sysrq_char(port, c) ||
|
|
sci_port->break_flag)
|
|
count = 0;
|
|
else
|
|
tty_insert_flip_char(tty, c, TTY_NORMAL);
|
|
} else {
|
|
for (i = 0; i < count; i++) {
|
|
char c = sci_in(port, SCxRDR);
|
|
status = sci_in(port, SCxSR);
|
|
#if defined(CONFIG_CPU_SH3)
|
|
/* Skip "chars" during break */
|
|
if (sci_port->break_flag) {
|
|
if ((c == 0) &&
|
|
(status & SCxSR_FER(port))) {
|
|
count--; i--;
|
|
continue;
|
|
}
|
|
|
|
/* Nonzero => end-of-break */
|
|
dev_dbg(port->dev, "debounce<%02x>\n", c);
|
|
sci_port->break_flag = 0;
|
|
|
|
if (STEPFN(c)) {
|
|
count--; i--;
|
|
continue;
|
|
}
|
|
}
|
|
#endif /* CONFIG_CPU_SH3 */
|
|
if (uart_handle_sysrq_char(port, c)) {
|
|
count--; i--;
|
|
continue;
|
|
}
|
|
|
|
/* Store data and status */
|
|
if (status & SCxSR_FER(port)) {
|
|
flag = TTY_FRAME;
|
|
dev_notice(port->dev, "frame error\n");
|
|
} else if (status & SCxSR_PER(port)) {
|
|
flag = TTY_PARITY;
|
|
dev_notice(port->dev, "parity error\n");
|
|
} else
|
|
flag = TTY_NORMAL;
|
|
|
|
tty_insert_flip_char(tty, c, flag);
|
|
}
|
|
}
|
|
|
|
sci_in(port, SCxSR); /* dummy read */
|
|
sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
|
|
|
|
copied += count;
|
|
port->icount.rx += count;
|
|
}
|
|
|
|
if (copied) {
|
|
/* Tell the rest of the system the news. New characters! */
|
|
tty_flip_buffer_push(tty);
|
|
} else {
|
|
sci_in(port, SCxSR); /* dummy read */
|
|
sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
|
|
}
|
|
}
|
|
|
|
#define SCI_BREAK_JIFFIES (HZ/20)
|
|
/* The sci generates interrupts during the break,
|
|
* 1 per millisecond or so during the break period, for 9600 baud.
|
|
* So dont bother disabling interrupts.
|
|
* But dont want more than 1 break event.
|
|
* Use a kernel timer to periodically poll the rx line until
|
|
* the break is finished.
|
|
*/
|
|
static void sci_schedule_break_timer(struct sci_port *port)
|
|
{
|
|
port->break_timer.expires = jiffies + SCI_BREAK_JIFFIES;
|
|
add_timer(&port->break_timer);
|
|
}
|
|
/* Ensure that two consecutive samples find the break over. */
|
|
static void sci_break_timer(unsigned long data)
|
|
{
|
|
struct sci_port *port = (struct sci_port *)data;
|
|
|
|
if (sci_rxd_in(&port->port) == 0) {
|
|
port->break_flag = 1;
|
|
sci_schedule_break_timer(port);
|
|
} else if (port->break_flag == 1) {
|
|
/* break is over. */
|
|
port->break_flag = 2;
|
|
sci_schedule_break_timer(port);
|
|
} else
|
|
port->break_flag = 0;
|
|
}
|
|
|
|
static inline int sci_handle_errors(struct uart_port *port)
|
|
{
|
|
int copied = 0;
|
|
unsigned short status = sci_in(port, SCxSR);
|
|
struct tty_struct *tty = port->state->port.tty;
|
|
|
|
if (status & SCxSR_ORER(port)) {
|
|
/* overrun error */
|
|
if (tty_insert_flip_char(tty, 0, TTY_OVERRUN))
|
|
copied++;
|
|
|
|
dev_notice(port->dev, "overrun error");
|
|
}
|
|
|
|
if (status & SCxSR_FER(port)) {
|
|
if (sci_rxd_in(port) == 0) {
|
|
/* Notify of BREAK */
|
|
struct sci_port *sci_port = to_sci_port(port);
|
|
|
|
if (!sci_port->break_flag) {
|
|
sci_port->break_flag = 1;
|
|
sci_schedule_break_timer(sci_port);
|
|
|
|
/* Do sysrq handling. */
|
|
if (uart_handle_break(port))
|
|
return 0;
|
|
|
|
dev_dbg(port->dev, "BREAK detected\n");
|
|
|
|
if (tty_insert_flip_char(tty, 0, TTY_BREAK))
|
|
copied++;
|
|
}
|
|
|
|
} else {
|
|
/* frame error */
|
|
if (tty_insert_flip_char(tty, 0, TTY_FRAME))
|
|
copied++;
|
|
|
|
dev_notice(port->dev, "frame error\n");
|
|
}
|
|
}
|
|
|
|
if (status & SCxSR_PER(port)) {
|
|
/* parity error */
|
|
if (tty_insert_flip_char(tty, 0, TTY_PARITY))
|
|
copied++;
|
|
|
|
dev_notice(port->dev, "parity error");
|
|
}
|
|
|
|
if (copied)
|
|
tty_flip_buffer_push(tty);
|
|
|
|
return copied;
|
|
}
|
|
|
|
static inline int sci_handle_fifo_overrun(struct uart_port *port)
|
|
{
|
|
struct tty_struct *tty = port->state->port.tty;
|
|
int copied = 0;
|
|
|
|
if (port->type != PORT_SCIF)
|
|
return 0;
|
|
|
|
if ((sci_in(port, SCLSR) & SCIF_ORER) != 0) {
|
|
sci_out(port, SCLSR, 0);
|
|
|
|
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
|
|
tty_flip_buffer_push(tty);
|
|
|
|
dev_notice(port->dev, "overrun error\n");
|
|
copied++;
|
|
}
|
|
|
|
return copied;
|
|
}
|
|
|
|
static inline int sci_handle_breaks(struct uart_port *port)
|
|
{
|
|
int copied = 0;
|
|
unsigned short status = sci_in(port, SCxSR);
|
|
struct tty_struct *tty = port->state->port.tty;
|
|
struct sci_port *s = to_sci_port(port);
|
|
|
|
if (uart_handle_break(port))
|
|
return 0;
|
|
|
|
if (!s->break_flag && status & SCxSR_BRK(port)) {
|
|
#if defined(CONFIG_CPU_SH3)
|
|
/* Debounce break */
|
|
s->break_flag = 1;
|
|
#endif
|
|
/* Notify of BREAK */
|
|
if (tty_insert_flip_char(tty, 0, TTY_BREAK))
|
|
copied++;
|
|
|
|
dev_dbg(port->dev, "BREAK detected\n");
|
|
}
|
|
|
|
if (copied)
|
|
tty_flip_buffer_push(tty);
|
|
|
|
copied += sci_handle_fifo_overrun(port);
|
|
|
|
return copied;
|
|
}
|
|
|
|
static irqreturn_t sci_rx_interrupt(int irq, void *ptr)
|
|
{
|
|
#ifdef CONFIG_SERIAL_SH_SCI_DMA
|
|
struct uart_port *port = ptr;
|
|
struct sci_port *s = to_sci_port(port);
|
|
|
|
if (s->chan_rx) {
|
|
u16 scr = sci_in(port, SCSCR);
|
|
u16 ssr = sci_in(port, SCxSR);
|
|
|
|
/* Disable future Rx interrupts */
|
|
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
|
|
disable_irq_nosync(irq);
|
|
scr |= 0x4000;
|
|
} else {
|
|
scr &= ~SCSCR_RIE;
|
|
}
|
|
sci_out(port, SCSCR, scr);
|
|
/* Clear current interrupt */
|
|
sci_out(port, SCxSR, ssr & ~(1 | SCxSR_RDxF(port)));
|
|
dev_dbg(port->dev, "Rx IRQ %lu: setup t-out in %u jiffies\n",
|
|
jiffies, s->rx_timeout);
|
|
mod_timer(&s->rx_timer, jiffies + s->rx_timeout);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
#endif
|
|
|
|
/* I think sci_receive_chars has to be called irrespective
|
|
* of whether the I_IXOFF is set, otherwise, how is the interrupt
|
|
* to be disabled?
|
|
*/
|
|
sci_receive_chars(ptr);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t sci_tx_interrupt(int irq, void *ptr)
|
|
{
|
|
struct uart_port *port = ptr;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&port->lock, flags);
|
|
sci_transmit_chars(port);
|
|
spin_unlock_irqrestore(&port->lock, flags);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t sci_er_interrupt(int irq, void *ptr)
|
|
{
|
|
struct uart_port *port = ptr;
|
|
|
|
/* Handle errors */
|
|
if (port->type == PORT_SCI) {
|
|
if (sci_handle_errors(port)) {
|
|
/* discard character in rx buffer */
|
|
sci_in(port, SCxSR);
|
|
sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
|
|
}
|
|
} else {
|
|
sci_handle_fifo_overrun(port);
|
|
sci_rx_interrupt(irq, ptr);
|
|
}
|
|
|
|
sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port));
|
|
|
|
/* Kick the transmission */
|
|
sci_tx_interrupt(irq, ptr);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t sci_br_interrupt(int irq, void *ptr)
|
|
{
|
|
struct uart_port *port = ptr;
|
|
|
|
/* Handle BREAKs */
|
|
sci_handle_breaks(port);
|
|
sci_out(port, SCxSR, SCxSR_BREAK_CLEAR(port));
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static inline unsigned long port_rx_irq_mask(struct uart_port *port)
|
|
{
|
|
/*
|
|
* Not all ports (such as SCIFA) will support REIE. Rather than
|
|
* special-casing the port type, we check the port initialization
|
|
* IRQ enable mask to see whether the IRQ is desired at all. If
|
|
* it's unset, it's logically inferred that there's no point in
|
|
* testing for it.
|
|
*/
|
|
return SCSCR_RIE | (to_sci_port(port)->scscr & SCSCR_REIE);
|
|
}
|
|
|
|
static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
|
|
{
|
|
unsigned short ssr_status, scr_status, err_enabled;
|
|
struct uart_port *port = ptr;
|
|
struct sci_port *s = to_sci_port(port);
|
|
irqreturn_t ret = IRQ_NONE;
|
|
|
|
ssr_status = sci_in(port, SCxSR);
|
|
scr_status = sci_in(port, SCSCR);
|
|
err_enabled = scr_status & port_rx_irq_mask(port);
|
|
|
|
/* Tx Interrupt */
|
|
if ((ssr_status & SCxSR_TDxE(port)) && (scr_status & SCSCR_TIE) &&
|
|
!s->chan_tx)
|
|
ret = sci_tx_interrupt(irq, ptr);
|
|
|
|
/*
|
|
* Rx Interrupt: if we're using DMA, the DMA controller clears RDF /
|
|
* DR flags
|
|
*/
|
|
if (((ssr_status & SCxSR_RDxF(port)) || s->chan_rx) &&
|
|
(scr_status & SCSCR_RIE))
|
|
ret = sci_rx_interrupt(irq, ptr);
|
|
|
|
/* Error Interrupt */
|
|
if ((ssr_status & SCxSR_ERRORS(port)) && err_enabled)
|
|
ret = sci_er_interrupt(irq, ptr);
|
|
|
|
/* Break Interrupt */
|
|
if ((ssr_status & SCxSR_BRK(port)) && err_enabled)
|
|
ret = sci_br_interrupt(irq, ptr);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Here we define a transistion notifier so that we can update all of our
|
|
* ports' baud rate when the peripheral clock changes.
|
|
*/
|
|
static int sci_notifier(struct notifier_block *self,
|
|
unsigned long phase, void *p)
|
|
{
|
|
struct sh_sci_priv *priv = container_of(self,
|
|
struct sh_sci_priv, clk_nb);
|
|
struct sci_port *sci_port;
|
|
unsigned long flags;
|
|
|
|
if ((phase == CPUFREQ_POSTCHANGE) ||
|
|
(phase == CPUFREQ_RESUMECHANGE)) {
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
list_for_each_entry(sci_port, &priv->ports, node)
|
|
sci_port->port.uartclk = clk_get_rate(sci_port->iclk);
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
}
|
|
|
|
return NOTIFY_OK;
|
|
}
|
|
|
|
static void sci_clk_enable(struct uart_port *port)
|
|
{
|
|
struct sci_port *sci_port = to_sci_port(port);
|
|
|
|
clk_enable(sci_port->iclk);
|
|
sci_port->port.uartclk = clk_get_rate(sci_port->iclk);
|
|
clk_enable(sci_port->fclk);
|
|
}
|
|
|
|
static void sci_clk_disable(struct uart_port *port)
|
|
{
|
|
struct sci_port *sci_port = to_sci_port(port);
|
|
|
|
clk_disable(sci_port->fclk);
|
|
clk_disable(sci_port->iclk);
|
|
}
|
|
|
|
static int sci_request_irq(struct sci_port *port)
|
|
{
|
|
int i;
|
|
irqreturn_t (*handlers[4])(int irq, void *ptr) = {
|
|
sci_er_interrupt, sci_rx_interrupt, sci_tx_interrupt,
|
|
sci_br_interrupt,
|
|
};
|
|
const char *desc[] = { "SCI Receive Error", "SCI Receive Data Full",
|
|
"SCI Transmit Data Empty", "SCI Break" };
|
|
|
|
if (port->irqs[0] == port->irqs[1]) {
|
|
if (unlikely(!port->irqs[0]))
|
|
return -ENODEV;
|
|
|
|
if (request_irq(port->irqs[0], sci_mpxed_interrupt,
|
|
IRQF_DISABLED, "sci", port)) {
|
|
dev_err(port->port.dev, "Can't allocate IRQ\n");
|
|
return -ENODEV;
|
|
}
|
|
} else {
|
|
for (i = 0; i < ARRAY_SIZE(handlers); i++) {
|
|
if (unlikely(!port->irqs[i]))
|
|
continue;
|
|
|
|
if (request_irq(port->irqs[i], handlers[i],
|
|
IRQF_DISABLED, desc[i], port)) {
|
|
dev_err(port->port.dev, "Can't allocate IRQ\n");
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sci_free_irq(struct sci_port *port)
|
|
{
|
|
int i;
|
|
|
|
if (port->irqs[0] == port->irqs[1])
|
|
free_irq(port->irqs[0], port);
|
|
else {
|
|
for (i = 0; i < ARRAY_SIZE(port->irqs); i++) {
|
|
if (!port->irqs[i])
|
|
continue;
|
|
|
|
free_irq(port->irqs[i], port);
|
|
}
|
|
}
|
|
}
|
|
|
|
static unsigned int sci_tx_empty(struct uart_port *port)
|
|
{
|
|
unsigned short status = sci_in(port, SCxSR);
|
|
unsigned short in_tx_fifo = scif_txfill(port);
|
|
|
|
return (status & SCxSR_TEND(port)) && !in_tx_fifo ? TIOCSER_TEMT : 0;
|
|
}
|
|
|
|
static void sci_set_mctrl(struct uart_port *port, unsigned int mctrl)
|
|
{
|
|
/* This routine is used for seting signals of: DTR, DCD, CTS/RTS */
|
|
/* We use SCIF's hardware for CTS/RTS, so don't need any for that. */
|
|
/* If you have signals for DTR and DCD, please implement here. */
|
|
}
|
|
|
|
static unsigned int sci_get_mctrl(struct uart_port *port)
|
|
{
|
|
/* This routine is used for getting signals of: DTR, DCD, DSR, RI,
|
|
and CTS/RTS */
|
|
|
|
return TIOCM_DTR | TIOCM_RTS | TIOCM_DSR;
|
|
}
|
|
|
|
#ifdef CONFIG_SERIAL_SH_SCI_DMA
|
|
static void sci_dma_tx_complete(void *arg)
|
|
{
|
|
struct sci_port *s = arg;
|
|
struct uart_port *port = &s->port;
|
|
struct circ_buf *xmit = &port->state->xmit;
|
|
unsigned long flags;
|
|
|
|
dev_dbg(port->dev, "%s(%d)\n", __func__, port->line);
|
|
|
|
spin_lock_irqsave(&port->lock, flags);
|
|
|
|
xmit->tail += sg_dma_len(&s->sg_tx);
|
|
xmit->tail &= UART_XMIT_SIZE - 1;
|
|
|
|
port->icount.tx += sg_dma_len(&s->sg_tx);
|
|
|
|
async_tx_ack(s->desc_tx);
|
|
s->cookie_tx = -EINVAL;
|
|
s->desc_tx = NULL;
|
|
|
|
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
|
|
uart_write_wakeup(port);
|
|
|
|
if (!uart_circ_empty(xmit)) {
|
|
schedule_work(&s->work_tx);
|
|
} else if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
|
|
u16 ctrl = sci_in(port, SCSCR);
|
|
sci_out(port, SCSCR, ctrl & ~SCSCR_TIE);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&port->lock, flags);
|
|
}
|
|
|
|
/* Locking: called with port lock held */
|
|
static int sci_dma_rx_push(struct sci_port *s, struct tty_struct *tty,
|
|
size_t count)
|
|
{
|
|
struct uart_port *port = &s->port;
|
|
int i, active, room;
|
|
|
|
room = tty_buffer_request_room(tty, count);
|
|
|
|
if (s->active_rx == s->cookie_rx[0]) {
|
|
active = 0;
|
|
} else if (s->active_rx == s->cookie_rx[1]) {
|
|
active = 1;
|
|
} else {
|
|
dev_err(port->dev, "cookie %d not found!\n", s->active_rx);
|
|
return 0;
|
|
}
|
|
|
|
if (room < count)
|
|
dev_warn(port->dev, "Rx overrun: dropping %u bytes\n",
|
|
count - room);
|
|
if (!room)
|
|
return room;
|
|
|
|
for (i = 0; i < room; i++)
|
|
tty_insert_flip_char(tty, ((u8 *)sg_virt(&s->sg_rx[active]))[i],
|
|
TTY_NORMAL);
|
|
|
|
port->icount.rx += room;
|
|
|
|
return room;
|
|
}
|
|
|
|
static void sci_dma_rx_complete(void *arg)
|
|
{
|
|
struct sci_port *s = arg;
|
|
struct uart_port *port = &s->port;
|
|
struct tty_struct *tty = port->state->port.tty;
|
|
unsigned long flags;
|
|
int count;
|
|
|
|
dev_dbg(port->dev, "%s(%d) active #%d\n", __func__, port->line, s->active_rx);
|
|
|
|
spin_lock_irqsave(&port->lock, flags);
|
|
|
|
count = sci_dma_rx_push(s, tty, s->buf_len_rx);
|
|
|
|
mod_timer(&s->rx_timer, jiffies + s->rx_timeout);
|
|
|
|
spin_unlock_irqrestore(&port->lock, flags);
|
|
|
|
if (count)
|
|
tty_flip_buffer_push(tty);
|
|
|
|
schedule_work(&s->work_rx);
|
|
}
|
|
|
|
static void sci_start_rx(struct uart_port *port);
|
|
static void sci_start_tx(struct uart_port *port);
|
|
|
|
static void sci_rx_dma_release(struct sci_port *s, bool enable_pio)
|
|
{
|
|
struct dma_chan *chan = s->chan_rx;
|
|
struct uart_port *port = &s->port;
|
|
|
|
s->chan_rx = NULL;
|
|
s->cookie_rx[0] = s->cookie_rx[1] = -EINVAL;
|
|
dma_release_channel(chan);
|
|
if (sg_dma_address(&s->sg_rx[0]))
|
|
dma_free_coherent(port->dev, s->buf_len_rx * 2,
|
|
sg_virt(&s->sg_rx[0]), sg_dma_address(&s->sg_rx[0]));
|
|
if (enable_pio)
|
|
sci_start_rx(port);
|
|
}
|
|
|
|
static void sci_tx_dma_release(struct sci_port *s, bool enable_pio)
|
|
{
|
|
struct dma_chan *chan = s->chan_tx;
|
|
struct uart_port *port = &s->port;
|
|
|
|
s->chan_tx = NULL;
|
|
s->cookie_tx = -EINVAL;
|
|
dma_release_channel(chan);
|
|
if (enable_pio)
|
|
sci_start_tx(port);
|
|
}
|
|
|
|
static void sci_submit_rx(struct sci_port *s)
|
|
{
|
|
struct dma_chan *chan = s->chan_rx;
|
|
int i;
|
|
|
|
for (i = 0; i < 2; i++) {
|
|
struct scatterlist *sg = &s->sg_rx[i];
|
|
struct dma_async_tx_descriptor *desc;
|
|
|
|
desc = chan->device->device_prep_slave_sg(chan,
|
|
sg, 1, DMA_FROM_DEVICE, DMA_PREP_INTERRUPT);
|
|
|
|
if (desc) {
|
|
s->desc_rx[i] = desc;
|
|
desc->callback = sci_dma_rx_complete;
|
|
desc->callback_param = s;
|
|
s->cookie_rx[i] = desc->tx_submit(desc);
|
|
}
|
|
|
|
if (!desc || s->cookie_rx[i] < 0) {
|
|
if (i) {
|
|
async_tx_ack(s->desc_rx[0]);
|
|
s->cookie_rx[0] = -EINVAL;
|
|
}
|
|
if (desc) {
|
|
async_tx_ack(desc);
|
|
s->cookie_rx[i] = -EINVAL;
|
|
}
|
|
dev_warn(s->port.dev,
|
|
"failed to re-start DMA, using PIO\n");
|
|
sci_rx_dma_release(s, true);
|
|
return;
|
|
}
|
|
dev_dbg(s->port.dev, "%s(): cookie %d to #%d\n", __func__,
|
|
s->cookie_rx[i], i);
|
|
}
|
|
|
|
s->active_rx = s->cookie_rx[0];
|
|
|
|
dma_async_issue_pending(chan);
|
|
}
|
|
|
|
static void work_fn_rx(struct work_struct *work)
|
|
{
|
|
struct sci_port *s = container_of(work, struct sci_port, work_rx);
|
|
struct uart_port *port = &s->port;
|
|
struct dma_async_tx_descriptor *desc;
|
|
int new;
|
|
|
|
if (s->active_rx == s->cookie_rx[0]) {
|
|
new = 0;
|
|
} else if (s->active_rx == s->cookie_rx[1]) {
|
|
new = 1;
|
|
} else {
|
|
dev_err(port->dev, "cookie %d not found!\n", s->active_rx);
|
|
return;
|
|
}
|
|
desc = s->desc_rx[new];
|
|
|
|
if (dma_async_is_tx_complete(s->chan_rx, s->active_rx, NULL, NULL) !=
|
|
DMA_SUCCESS) {
|
|
/* Handle incomplete DMA receive */
|
|
struct tty_struct *tty = port->state->port.tty;
|
|
struct dma_chan *chan = s->chan_rx;
|
|
struct sh_desc *sh_desc = container_of(desc, struct sh_desc,
|
|
async_tx);
|
|
unsigned long flags;
|
|
int count;
|
|
|
|
chan->device->device_control(chan, DMA_TERMINATE_ALL, 0);
|
|
dev_dbg(port->dev, "Read %u bytes with cookie %d\n",
|
|
sh_desc->partial, sh_desc->cookie);
|
|
|
|
spin_lock_irqsave(&port->lock, flags);
|
|
count = sci_dma_rx_push(s, tty, sh_desc->partial);
|
|
spin_unlock_irqrestore(&port->lock, flags);
|
|
|
|
if (count)
|
|
tty_flip_buffer_push(tty);
|
|
|
|
sci_submit_rx(s);
|
|
|
|
return;
|
|
}
|
|
|
|
s->cookie_rx[new] = desc->tx_submit(desc);
|
|
if (s->cookie_rx[new] < 0) {
|
|
dev_warn(port->dev, "Failed submitting Rx DMA descriptor\n");
|
|
sci_rx_dma_release(s, true);
|
|
return;
|
|
}
|
|
|
|
s->active_rx = s->cookie_rx[!new];
|
|
|
|
dev_dbg(port->dev, "%s: cookie %d #%d, new active #%d\n", __func__,
|
|
s->cookie_rx[new], new, s->active_rx);
|
|
}
|
|
|
|
static void work_fn_tx(struct work_struct *work)
|
|
{
|
|
struct sci_port *s = container_of(work, struct sci_port, work_tx);
|
|
struct dma_async_tx_descriptor *desc;
|
|
struct dma_chan *chan = s->chan_tx;
|
|
struct uart_port *port = &s->port;
|
|
struct circ_buf *xmit = &port->state->xmit;
|
|
struct scatterlist *sg = &s->sg_tx;
|
|
|
|
/*
|
|
* DMA is idle now.
|
|
* Port xmit buffer is already mapped, and it is one page... Just adjust
|
|
* offsets and lengths. Since it is a circular buffer, we have to
|
|
* transmit till the end, and then the rest. Take the port lock to get a
|
|
* consistent xmit buffer state.
|
|
*/
|
|
spin_lock_irq(&port->lock);
|
|
sg->offset = xmit->tail & (UART_XMIT_SIZE - 1);
|
|
sg_dma_address(sg) = (sg_dma_address(sg) & ~(UART_XMIT_SIZE - 1)) +
|
|
sg->offset;
|
|
sg_dma_len(sg) = min((int)CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE),
|
|
CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE));
|
|
spin_unlock_irq(&port->lock);
|
|
|
|
BUG_ON(!sg_dma_len(sg));
|
|
|
|
desc = chan->device->device_prep_slave_sg(chan,
|
|
sg, s->sg_len_tx, DMA_TO_DEVICE,
|
|
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
|
|
if (!desc) {
|
|
/* switch to PIO */
|
|
sci_tx_dma_release(s, true);
|
|
return;
|
|
}
|
|
|
|
dma_sync_sg_for_device(port->dev, sg, 1, DMA_TO_DEVICE);
|
|
|
|
spin_lock_irq(&port->lock);
|
|
s->desc_tx = desc;
|
|
desc->callback = sci_dma_tx_complete;
|
|
desc->callback_param = s;
|
|
spin_unlock_irq(&port->lock);
|
|
s->cookie_tx = desc->tx_submit(desc);
|
|
if (s->cookie_tx < 0) {
|
|
dev_warn(port->dev, "Failed submitting Tx DMA descriptor\n");
|
|
/* switch to PIO */
|
|
sci_tx_dma_release(s, true);
|
|
return;
|
|
}
|
|
|
|
dev_dbg(port->dev, "%s: %p: %d...%d, cookie %d\n", __func__,
|
|
xmit->buf, xmit->tail, xmit->head, s->cookie_tx);
|
|
|
|
dma_async_issue_pending(chan);
|
|
}
|
|
#endif
|
|
|
|
static void sci_start_tx(struct uart_port *port)
|
|
{
|
|
struct sci_port *s = to_sci_port(port);
|
|
unsigned short ctrl;
|
|
|
|
#ifdef CONFIG_SERIAL_SH_SCI_DMA
|
|
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
|
|
u16 new, scr = sci_in(port, SCSCR);
|
|
if (s->chan_tx)
|
|
new = scr | 0x8000;
|
|
else
|
|
new = scr & ~0x8000;
|
|
if (new != scr)
|
|
sci_out(port, SCSCR, new);
|
|
}
|
|
|
|
if (s->chan_tx && !uart_circ_empty(&s->port.state->xmit) &&
|
|
s->cookie_tx < 0)
|
|
schedule_work(&s->work_tx);
|
|
#endif
|
|
|
|
if (!s->chan_tx || port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
|
|
/* Set TIE (Transmit Interrupt Enable) bit in SCSCR */
|
|
ctrl = sci_in(port, SCSCR);
|
|
sci_out(port, SCSCR, ctrl | SCSCR_TIE);
|
|
}
|
|
}
|
|
|
|
static void sci_stop_tx(struct uart_port *port)
|
|
{
|
|
unsigned short ctrl;
|
|
|
|
/* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */
|
|
ctrl = sci_in(port, SCSCR);
|
|
|
|
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
|
|
ctrl &= ~0x8000;
|
|
|
|
ctrl &= ~SCSCR_TIE;
|
|
|
|
sci_out(port, SCSCR, ctrl);
|
|
}
|
|
|
|
static void sci_start_rx(struct uart_port *port)
|
|
{
|
|
unsigned short ctrl;
|
|
|
|
ctrl = sci_in(port, SCSCR) | port_rx_irq_mask(port);
|
|
|
|
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
|
|
ctrl &= ~0x4000;
|
|
|
|
sci_out(port, SCSCR, ctrl);
|
|
}
|
|
|
|
static void sci_stop_rx(struct uart_port *port)
|
|
{
|
|
unsigned short ctrl;
|
|
|
|
ctrl = sci_in(port, SCSCR);
|
|
|
|
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
|
|
ctrl &= ~0x4000;
|
|
|
|
ctrl &= ~port_rx_irq_mask(port);
|
|
|
|
sci_out(port, SCSCR, ctrl);
|
|
}
|
|
|
|
static void sci_enable_ms(struct uart_port *port)
|
|
{
|
|
/* Nothing here yet .. */
|
|
}
|
|
|
|
static void sci_break_ctl(struct uart_port *port, int break_state)
|
|
{
|
|
/* Nothing here yet .. */
|
|
}
|
|
|
|
#ifdef CONFIG_SERIAL_SH_SCI_DMA
|
|
static bool filter(struct dma_chan *chan, void *slave)
|
|
{
|
|
struct sh_dmae_slave *param = slave;
|
|
|
|
dev_dbg(chan->device->dev, "%s: slave ID %d\n", __func__,
|
|
param->slave_id);
|
|
|
|
if (param->dma_dev == chan->device->dev) {
|
|
chan->private = param;
|
|
return true;
|
|
} else {
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static void rx_timer_fn(unsigned long arg)
|
|
{
|
|
struct sci_port *s = (struct sci_port *)arg;
|
|
struct uart_port *port = &s->port;
|
|
u16 scr = sci_in(port, SCSCR);
|
|
|
|
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
|
|
scr &= ~0x4000;
|
|
enable_irq(s->irqs[1]);
|
|
}
|
|
sci_out(port, SCSCR, scr | SCSCR_RIE);
|
|
dev_dbg(port->dev, "DMA Rx timed out\n");
|
|
schedule_work(&s->work_rx);
|
|
}
|
|
|
|
static void sci_request_dma(struct uart_port *port)
|
|
{
|
|
struct sci_port *s = to_sci_port(port);
|
|
struct sh_dmae_slave *param;
|
|
struct dma_chan *chan;
|
|
dma_cap_mask_t mask;
|
|
int nent;
|
|
|
|
dev_dbg(port->dev, "%s: port %d DMA %p\n", __func__,
|
|
port->line, s->dma_dev);
|
|
|
|
if (!s->dma_dev)
|
|
return;
|
|
|
|
dma_cap_zero(mask);
|
|
dma_cap_set(DMA_SLAVE, mask);
|
|
|
|
param = &s->param_tx;
|
|
|
|
/* Slave ID, e.g., SHDMA_SLAVE_SCIF0_TX */
|
|
param->slave_id = s->slave_tx;
|
|
param->dma_dev = s->dma_dev;
|
|
|
|
s->cookie_tx = -EINVAL;
|
|
chan = dma_request_channel(mask, filter, param);
|
|
dev_dbg(port->dev, "%s: TX: got channel %p\n", __func__, chan);
|
|
if (chan) {
|
|
s->chan_tx = chan;
|
|
sg_init_table(&s->sg_tx, 1);
|
|
/* UART circular tx buffer is an aligned page. */
|
|
BUG_ON((int)port->state->xmit.buf & ~PAGE_MASK);
|
|
sg_set_page(&s->sg_tx, virt_to_page(port->state->xmit.buf),
|
|
UART_XMIT_SIZE, (int)port->state->xmit.buf & ~PAGE_MASK);
|
|
nent = dma_map_sg(port->dev, &s->sg_tx, 1, DMA_TO_DEVICE);
|
|
if (!nent)
|
|
sci_tx_dma_release(s, false);
|
|
else
|
|
dev_dbg(port->dev, "%s: mapped %d@%p to %x\n", __func__,
|
|
sg_dma_len(&s->sg_tx),
|
|
port->state->xmit.buf, sg_dma_address(&s->sg_tx));
|
|
|
|
s->sg_len_tx = nent;
|
|
|
|
INIT_WORK(&s->work_tx, work_fn_tx);
|
|
}
|
|
|
|
param = &s->param_rx;
|
|
|
|
/* Slave ID, e.g., SHDMA_SLAVE_SCIF0_RX */
|
|
param->slave_id = s->slave_rx;
|
|
param->dma_dev = s->dma_dev;
|
|
|
|
chan = dma_request_channel(mask, filter, param);
|
|
dev_dbg(port->dev, "%s: RX: got channel %p\n", __func__, chan);
|
|
if (chan) {
|
|
dma_addr_t dma[2];
|
|
void *buf[2];
|
|
int i;
|
|
|
|
s->chan_rx = chan;
|
|
|
|
s->buf_len_rx = 2 * max(16, (int)port->fifosize);
|
|
buf[0] = dma_alloc_coherent(port->dev, s->buf_len_rx * 2,
|
|
&dma[0], GFP_KERNEL);
|
|
|
|
if (!buf[0]) {
|
|
dev_warn(port->dev,
|
|
"failed to allocate dma buffer, using PIO\n");
|
|
sci_rx_dma_release(s, true);
|
|
return;
|
|
}
|
|
|
|
buf[1] = buf[0] + s->buf_len_rx;
|
|
dma[1] = dma[0] + s->buf_len_rx;
|
|
|
|
for (i = 0; i < 2; i++) {
|
|
struct scatterlist *sg = &s->sg_rx[i];
|
|
|
|
sg_init_table(sg, 1);
|
|
sg_set_page(sg, virt_to_page(buf[i]), s->buf_len_rx,
|
|
(int)buf[i] & ~PAGE_MASK);
|
|
sg_dma_address(sg) = dma[i];
|
|
}
|
|
|
|
INIT_WORK(&s->work_rx, work_fn_rx);
|
|
setup_timer(&s->rx_timer, rx_timer_fn, (unsigned long)s);
|
|
|
|
sci_submit_rx(s);
|
|
}
|
|
}
|
|
|
|
static void sci_free_dma(struct uart_port *port)
|
|
{
|
|
struct sci_port *s = to_sci_port(port);
|
|
|
|
if (!s->dma_dev)
|
|
return;
|
|
|
|
if (s->chan_tx)
|
|
sci_tx_dma_release(s, false);
|
|
if (s->chan_rx)
|
|
sci_rx_dma_release(s, false);
|
|
}
|
|
#endif
|
|
|
|
static int sci_startup(struct uart_port *port)
|
|
{
|
|
struct sci_port *s = to_sci_port(port);
|
|
|
|
dev_dbg(port->dev, "%s(%d)\n", __func__, port->line);
|
|
|
|
if (s->enable)
|
|
s->enable(port);
|
|
|
|
sci_request_irq(s);
|
|
#ifdef CONFIG_SERIAL_SH_SCI_DMA
|
|
sci_request_dma(port);
|
|
#endif
|
|
sci_start_tx(port);
|
|
sci_start_rx(port);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sci_shutdown(struct uart_port *port)
|
|
{
|
|
struct sci_port *s = to_sci_port(port);
|
|
|
|
dev_dbg(port->dev, "%s(%d)\n", __func__, port->line);
|
|
|
|
sci_stop_rx(port);
|
|
sci_stop_tx(port);
|
|
#ifdef CONFIG_SERIAL_SH_SCI_DMA
|
|
sci_free_dma(port);
|
|
#endif
|
|
sci_free_irq(s);
|
|
|
|
if (s->disable)
|
|
s->disable(port);
|
|
}
|
|
|
|
static unsigned int sci_scbrr_calc(unsigned int algo_id, unsigned int bps,
|
|
unsigned long freq)
|
|
{
|
|
switch (algo_id) {
|
|
case SCBRR_ALGO_1:
|
|
return ((freq + 16 * bps) / (16 * bps) - 1);
|
|
case SCBRR_ALGO_2:
|
|
return ((freq + 16 * bps) / (32 * bps) - 1);
|
|
case SCBRR_ALGO_3:
|
|
return (((freq * 2) + 16 * bps) / (16 * bps) - 1);
|
|
case SCBRR_ALGO_4:
|
|
return (((freq * 2) + 16 * bps) / (32 * bps) - 1);
|
|
case SCBRR_ALGO_5:
|
|
return (((freq * 1000 / 32) / bps) - 1);
|
|
}
|
|
|
|
/* Warn, but use a safe default */
|
|
WARN_ON(1);
|
|
return ((freq + 16 * bps) / (32 * bps) - 1);
|
|
}
|
|
|
|
static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
|
|
struct ktermios *old)
|
|
{
|
|
struct sci_port *s = to_sci_port(port);
|
|
unsigned int status, baud, smr_val, max_baud;
|
|
int t = -1;
|
|
u16 scfcr = 0;
|
|
|
|
/*
|
|
* earlyprintk comes here early on with port->uartclk set to zero.
|
|
* the clock framework is not up and running at this point so here
|
|
* we assume that 115200 is the maximum baud rate. please note that
|
|
* the baud rate is not programmed during earlyprintk - it is assumed
|
|
* that the previous boot loader has enabled required clocks and
|
|
* setup the baud rate generator hardware for us already.
|
|
*/
|
|
max_baud = port->uartclk ? port->uartclk / 16 : 115200;
|
|
|
|
baud = uart_get_baud_rate(port, termios, old, 0, max_baud);
|
|
if (likely(baud && port->uartclk))
|
|
t = sci_scbrr_calc(s->scbrr_algo_id, baud, port->uartclk);
|
|
|
|
do {
|
|
status = sci_in(port, SCxSR);
|
|
} while (!(status & SCxSR_TEND(port)));
|
|
|
|
sci_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */
|
|
|
|
if (port->type != PORT_SCI)
|
|
sci_out(port, SCFCR, scfcr | SCFCR_RFRST | SCFCR_TFRST);
|
|
|
|
smr_val = sci_in(port, SCSMR) & 3;
|
|
if ((termios->c_cflag & CSIZE) == CS7)
|
|
smr_val |= 0x40;
|
|
if (termios->c_cflag & PARENB)
|
|
smr_val |= 0x20;
|
|
if (termios->c_cflag & PARODD)
|
|
smr_val |= 0x30;
|
|
if (termios->c_cflag & CSTOPB)
|
|
smr_val |= 0x08;
|
|
|
|
uart_update_timeout(port, termios->c_cflag, baud);
|
|
|
|
sci_out(port, SCSMR, smr_val);
|
|
|
|
dev_dbg(port->dev, "%s: SMR %x, t %x, SCSCR %x\n", __func__, smr_val, t,
|
|
s->scscr);
|
|
|
|
if (t > 0) {
|
|
if (t >= 256) {
|
|
sci_out(port, SCSMR, (sci_in(port, SCSMR) & ~3) | 1);
|
|
t >>= 2;
|
|
} else
|
|
sci_out(port, SCSMR, sci_in(port, SCSMR) & ~3);
|
|
|
|
sci_out(port, SCBRR, t);
|
|
udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */
|
|
}
|
|
|
|
sci_init_pins(port, termios->c_cflag);
|
|
sci_out(port, SCFCR, scfcr | ((termios->c_cflag & CRTSCTS) ? SCFCR_MCE : 0));
|
|
|
|
sci_out(port, SCSCR, s->scscr);
|
|
|
|
#ifdef CONFIG_SERIAL_SH_SCI_DMA
|
|
/*
|
|
* Calculate delay for 1.5 DMA buffers: see
|
|
* drivers/serial/serial_core.c::uart_update_timeout(). With 10 bits
|
|
* (CS8), 250Hz, 115200 baud and 64 bytes FIFO, the above function
|
|
* calculates 1 jiffie for the data plus 5 jiffies for the "slop(e)."
|
|
* Then below we calculate 3 jiffies (12ms) for 1.5 DMA buffers (3 FIFO
|
|
* sizes), but it has been found out experimentally, that this is not
|
|
* enough: the driver too often needlessly runs on a DMA timeout. 20ms
|
|
* as a minimum seem to work perfectly.
|
|
*/
|
|
if (s->chan_rx) {
|
|
s->rx_timeout = (port->timeout - HZ / 50) * s->buf_len_rx * 3 /
|
|
port->fifosize / 2;
|
|
dev_dbg(port->dev,
|
|
"DMA Rx t-out %ums, tty t-out %u jiffies\n",
|
|
s->rx_timeout * 1000 / HZ, port->timeout);
|
|
if (s->rx_timeout < msecs_to_jiffies(20))
|
|
s->rx_timeout = msecs_to_jiffies(20);
|
|
}
|
|
#endif
|
|
|
|
if ((termios->c_cflag & CREAD) != 0)
|
|
sci_start_rx(port);
|
|
}
|
|
|
|
static const char *sci_type(struct uart_port *port)
|
|
{
|
|
switch (port->type) {
|
|
case PORT_IRDA:
|
|
return "irda";
|
|
case PORT_SCI:
|
|
return "sci";
|
|
case PORT_SCIF:
|
|
return "scif";
|
|
case PORT_SCIFA:
|
|
return "scifa";
|
|
case PORT_SCIFB:
|
|
return "scifb";
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static void sci_release_port(struct uart_port *port)
|
|
{
|
|
/* Nothing here yet .. */
|
|
}
|
|
|
|
static int sci_request_port(struct uart_port *port)
|
|
{
|
|
/* Nothing here yet .. */
|
|
return 0;
|
|
}
|
|
|
|
static void sci_config_port(struct uart_port *port, int flags)
|
|
{
|
|
struct sci_port *s = to_sci_port(port);
|
|
|
|
port->type = s->type;
|
|
|
|
if (port->membase)
|
|
return;
|
|
|
|
if (port->flags & UPF_IOREMAP) {
|
|
port->membase = ioremap_nocache(port->mapbase, 0x40);
|
|
|
|
if (IS_ERR(port->membase))
|
|
dev_err(port->dev, "can't remap port#%d\n", port->line);
|
|
} else {
|
|
/*
|
|
* For the simple (and majority of) cases where we don't
|
|
* need to do any remapping, just cast the cookie
|
|
* directly.
|
|
*/
|
|
port->membase = (void __iomem *)port->mapbase;
|
|
}
|
|
}
|
|
|
|
static int sci_verify_port(struct uart_port *port, struct serial_struct *ser)
|
|
{
|
|
struct sci_port *s = to_sci_port(port);
|
|
|
|
if (ser->irq != s->irqs[SCIx_TXI_IRQ] || ser->irq > nr_irqs)
|
|
return -EINVAL;
|
|
if (ser->baud_base < 2400)
|
|
/* No paper tape reader for Mitch.. */
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct uart_ops sci_uart_ops = {
|
|
.tx_empty = sci_tx_empty,
|
|
.set_mctrl = sci_set_mctrl,
|
|
.get_mctrl = sci_get_mctrl,
|
|
.start_tx = sci_start_tx,
|
|
.stop_tx = sci_stop_tx,
|
|
.stop_rx = sci_stop_rx,
|
|
.enable_ms = sci_enable_ms,
|
|
.break_ctl = sci_break_ctl,
|
|
.startup = sci_startup,
|
|
.shutdown = sci_shutdown,
|
|
.set_termios = sci_set_termios,
|
|
.type = sci_type,
|
|
.release_port = sci_release_port,
|
|
.request_port = sci_request_port,
|
|
.config_port = sci_config_port,
|
|
.verify_port = sci_verify_port,
|
|
#ifdef CONFIG_CONSOLE_POLL
|
|
.poll_get_char = sci_poll_get_char,
|
|
.poll_put_char = sci_poll_put_char,
|
|
#endif
|
|
};
|
|
|
|
static int __devinit sci_init_single(struct platform_device *dev,
|
|
struct sci_port *sci_port,
|
|
unsigned int index,
|
|
struct plat_sci_port *p)
|
|
{
|
|
struct uart_port *port = &sci_port->port;
|
|
|
|
port->ops = &sci_uart_ops;
|
|
port->iotype = UPIO_MEM;
|
|
port->line = index;
|
|
|
|
switch (p->type) {
|
|
case PORT_SCIFB:
|
|
port->fifosize = 256;
|
|
break;
|
|
case PORT_SCIFA:
|
|
port->fifosize = 64;
|
|
break;
|
|
case PORT_SCIF:
|
|
port->fifosize = 16;
|
|
break;
|
|
default:
|
|
port->fifosize = 1;
|
|
break;
|
|
}
|
|
|
|
if (dev) {
|
|
sci_port->iclk = clk_get(&dev->dev, "sci_ick");
|
|
if (IS_ERR(sci_port->iclk)) {
|
|
sci_port->iclk = clk_get(&dev->dev, "peripheral_clk");
|
|
if (IS_ERR(sci_port->iclk)) {
|
|
dev_err(&dev->dev, "can't get iclk\n");
|
|
return PTR_ERR(sci_port->iclk);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* The function clock is optional, ignore it if we can't
|
|
* find it.
|
|
*/
|
|
sci_port->fclk = clk_get(&dev->dev, "sci_fck");
|
|
if (IS_ERR(sci_port->fclk))
|
|
sci_port->fclk = NULL;
|
|
|
|
sci_port->enable = sci_clk_enable;
|
|
sci_port->disable = sci_clk_disable;
|
|
port->dev = &dev->dev;
|
|
}
|
|
|
|
sci_port->break_timer.data = (unsigned long)sci_port;
|
|
sci_port->break_timer.function = sci_break_timer;
|
|
init_timer(&sci_port->break_timer);
|
|
|
|
port->mapbase = p->mapbase;
|
|
port->membase = p->membase;
|
|
|
|
port->irq = p->irqs[SCIx_TXI_IRQ];
|
|
port->flags = p->flags;
|
|
sci_port->type = port->type = p->type;
|
|
sci_port->scscr = p->scscr;
|
|
sci_port->scbrr_algo_id = p->scbrr_algo_id;
|
|
|
|
#ifdef CONFIG_SERIAL_SH_SCI_DMA
|
|
sci_port->dma_dev = p->dma_dev;
|
|
sci_port->slave_tx = p->dma_slave_tx;
|
|
sci_port->slave_rx = p->dma_slave_rx;
|
|
|
|
dev_dbg(port->dev, "%s: DMA device %p, tx %d, rx %d\n", __func__,
|
|
p->dma_dev, p->dma_slave_tx, p->dma_slave_rx);
|
|
#endif
|
|
|
|
memcpy(&sci_port->irqs, &p->irqs, sizeof(p->irqs));
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
|
|
static struct tty_driver *serial_console_device(struct console *co, int *index)
|
|
{
|
|
struct uart_driver *p = &sci_uart_driver;
|
|
*index = co->index;
|
|
return p->tty_driver;
|
|
}
|
|
|
|
static void serial_console_putchar(struct uart_port *port, int ch)
|
|
{
|
|
sci_poll_put_char(port, ch);
|
|
}
|
|
|
|
/*
|
|
* Print a string to the serial port trying not to disturb
|
|
* any possible real use of the port...
|
|
*/
|
|
static void serial_console_write(struct console *co, const char *s,
|
|
unsigned count)
|
|
{
|
|
struct uart_port *port = co->data;
|
|
struct sci_port *sci_port = to_sci_port(port);
|
|
unsigned short bits;
|
|
|
|
if (sci_port->enable)
|
|
sci_port->enable(port);
|
|
|
|
uart_console_write(port, s, count, serial_console_putchar);
|
|
|
|
/* wait until fifo is empty and last bit has been transmitted */
|
|
bits = SCxSR_TDxE(port) | SCxSR_TEND(port);
|
|
while ((sci_in(port, SCxSR) & bits) != bits)
|
|
cpu_relax();
|
|
|
|
if (sci_port->disable)
|
|
sci_port->disable(port);
|
|
}
|
|
|
|
static int __devinit serial_console_setup(struct console *co, char *options)
|
|
{
|
|
struct sci_port *sci_port;
|
|
struct uart_port *port;
|
|
int baud = 115200;
|
|
int bits = 8;
|
|
int parity = 'n';
|
|
int flow = 'n';
|
|
int ret;
|
|
|
|
/*
|
|
* Check whether an invalid uart number has been specified, and
|
|
* if so, search for the first available port that does have
|
|
* console support.
|
|
*/
|
|
if (co->index >= SCI_NPORTS)
|
|
co->index = 0;
|
|
|
|
if (co->data) {
|
|
port = co->data;
|
|
sci_port = to_sci_port(port);
|
|
} else {
|
|
sci_port = &sci_ports[co->index];
|
|
port = &sci_port->port;
|
|
co->data = port;
|
|
}
|
|
|
|
/*
|
|
* Also need to check port->type, we don't actually have any
|
|
* UPIO_PORT ports, but uart_report_port() handily misreports
|
|
* it anyways if we don't have a port available by the time this is
|
|
* called.
|
|
*/
|
|
if (!port->type)
|
|
return -ENODEV;
|
|
|
|
sci_config_port(port, 0);
|
|
|
|
if (sci_port->enable)
|
|
sci_port->enable(port);
|
|
|
|
if (options)
|
|
uart_parse_options(options, &baud, &parity, &bits, &flow);
|
|
|
|
ret = uart_set_options(port, co, baud, parity, bits, flow);
|
|
#if defined(__H8300H__) || defined(__H8300S__)
|
|
/* disable rx interrupt */
|
|
if (ret == 0)
|
|
sci_stop_rx(port);
|
|
#endif
|
|
/* TODO: disable clock */
|
|
return ret;
|
|
}
|
|
|
|
static struct console serial_console = {
|
|
.name = "ttySC",
|
|
.device = serial_console_device,
|
|
.write = serial_console_write,
|
|
.setup = serial_console_setup,
|
|
.flags = CON_PRINTBUFFER,
|
|
.index = -1,
|
|
};
|
|
|
|
static int __init sci_console_init(void)
|
|
{
|
|
register_console(&serial_console);
|
|
return 0;
|
|
}
|
|
console_initcall(sci_console_init);
|
|
|
|
static struct sci_port early_serial_port;
|
|
static struct console early_serial_console = {
|
|
.name = "early_ttySC",
|
|
.write = serial_console_write,
|
|
.flags = CON_PRINTBUFFER,
|
|
};
|
|
static char early_serial_buf[32];
|
|
|
|
#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
|
|
|
|
#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE)
|
|
#define SCI_CONSOLE (&serial_console)
|
|
#else
|
|
#define SCI_CONSOLE 0
|
|
#endif
|
|
|
|
static char banner[] __initdata =
|
|
KERN_INFO "SuperH SCI(F) driver initialized\n";
|
|
|
|
static struct uart_driver sci_uart_driver = {
|
|
.owner = THIS_MODULE,
|
|
.driver_name = "sci",
|
|
.dev_name = "ttySC",
|
|
.major = SCI_MAJOR,
|
|
.minor = SCI_MINOR_START,
|
|
.nr = SCI_NPORTS,
|
|
.cons = SCI_CONSOLE,
|
|
};
|
|
|
|
|
|
static int sci_remove(struct platform_device *dev)
|
|
{
|
|
struct sh_sci_priv *priv = platform_get_drvdata(dev);
|
|
struct sci_port *p;
|
|
unsigned long flags;
|
|
|
|
cpufreq_unregister_notifier(&priv->clk_nb, CPUFREQ_TRANSITION_NOTIFIER);
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
list_for_each_entry(p, &priv->ports, node) {
|
|
uart_remove_one_port(&sci_uart_driver, &p->port);
|
|
clk_put(p->iclk);
|
|
clk_put(p->fclk);
|
|
}
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
kfree(priv);
|
|
return 0;
|
|
}
|
|
|
|
static int __devinit sci_probe_single(struct platform_device *dev,
|
|
unsigned int index,
|
|
struct plat_sci_port *p,
|
|
struct sci_port *sciport)
|
|
{
|
|
struct sh_sci_priv *priv = platform_get_drvdata(dev);
|
|
unsigned long flags;
|
|
int ret;
|
|
|
|
/* Sanity check */
|
|
if (unlikely(index >= SCI_NPORTS)) {
|
|
dev_notice(&dev->dev, "Attempting to register port "
|
|
"%d when only %d are available.\n",
|
|
index+1, SCI_NPORTS);
|
|
dev_notice(&dev->dev, "Consider bumping "
|
|
"CONFIG_SERIAL_SH_SCI_NR_UARTS!\n");
|
|
return 0;
|
|
}
|
|
|
|
ret = sci_init_single(dev, sciport, index, p);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = uart_add_one_port(&sci_uart_driver, &sciport->port);
|
|
if (ret)
|
|
return ret;
|
|
|
|
INIT_LIST_HEAD(&sciport->node);
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
list_add(&sciport->node, &priv->ports);
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Register a set of serial devices attached to a platform device. The
|
|
* list is terminated with a zero flags entry, which means we expect
|
|
* all entries to have at least UPF_BOOT_AUTOCONF set. Platforms that need
|
|
* remapping (such as sh64) should also set UPF_IOREMAP.
|
|
*/
|
|
static int __devinit sci_probe(struct platform_device *dev)
|
|
{
|
|
struct plat_sci_port *p = dev->dev.platform_data;
|
|
struct sh_sci_priv *priv;
|
|
int i, ret = -EINVAL;
|
|
|
|
#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
|
|
if (is_early_platform_device(dev)) {
|
|
if (dev->id == -1)
|
|
return -ENOTSUPP;
|
|
early_serial_console.index = dev->id;
|
|
early_serial_console.data = &early_serial_port.port;
|
|
sci_init_single(NULL, &early_serial_port, dev->id, p);
|
|
serial_console_setup(&early_serial_console, early_serial_buf);
|
|
if (!strstr(early_serial_buf, "keep"))
|
|
early_serial_console.flags |= CON_BOOT;
|
|
register_console(&early_serial_console);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
INIT_LIST_HEAD(&priv->ports);
|
|
spin_lock_init(&priv->lock);
|
|
platform_set_drvdata(dev, priv);
|
|
|
|
priv->clk_nb.notifier_call = sci_notifier;
|
|
cpufreq_register_notifier(&priv->clk_nb, CPUFREQ_TRANSITION_NOTIFIER);
|
|
|
|
if (dev->id != -1) {
|
|
ret = sci_probe_single(dev, dev->id, p, &sci_ports[dev->id]);
|
|
if (ret)
|
|
goto err_unreg;
|
|
} else {
|
|
for (i = 0; p && p->flags != 0; p++, i++) {
|
|
ret = sci_probe_single(dev, i, p, &sci_ports[i]);
|
|
if (ret)
|
|
goto err_unreg;
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_SH_STANDARD_BIOS
|
|
sh_bios_gdb_detach();
|
|
#endif
|
|
|
|
return 0;
|
|
|
|
err_unreg:
|
|
sci_remove(dev);
|
|
return ret;
|
|
}
|
|
|
|
static int sci_suspend(struct device *dev)
|
|
{
|
|
struct sh_sci_priv *priv = dev_get_drvdata(dev);
|
|
struct sci_port *p;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
list_for_each_entry(p, &priv->ports, node)
|
|
uart_suspend_port(&sci_uart_driver, &p->port);
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sci_resume(struct device *dev)
|
|
{
|
|
struct sh_sci_priv *priv = dev_get_drvdata(dev);
|
|
struct sci_port *p;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
list_for_each_entry(p, &priv->ports, node)
|
|
uart_resume_port(&sci_uart_driver, &p->port);
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops sci_dev_pm_ops = {
|
|
.suspend = sci_suspend,
|
|
.resume = sci_resume,
|
|
};
|
|
|
|
static struct platform_driver sci_driver = {
|
|
.probe = sci_probe,
|
|
.remove = sci_remove,
|
|
.driver = {
|
|
.name = "sh-sci",
|
|
.owner = THIS_MODULE,
|
|
.pm = &sci_dev_pm_ops,
|
|
},
|
|
};
|
|
|
|
static int __init sci_init(void)
|
|
{
|
|
int ret;
|
|
|
|
printk(banner);
|
|
|
|
ret = uart_register_driver(&sci_uart_driver);
|
|
if (likely(ret == 0)) {
|
|
ret = platform_driver_register(&sci_driver);
|
|
if (unlikely(ret))
|
|
uart_unregister_driver(&sci_uart_driver);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void __exit sci_exit(void)
|
|
{
|
|
platform_driver_unregister(&sci_driver);
|
|
uart_unregister_driver(&sci_uart_driver);
|
|
}
|
|
|
|
#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
|
|
early_platform_init_buffer("earlyprintk", &sci_driver,
|
|
early_serial_buf, ARRAY_SIZE(early_serial_buf));
|
|
#endif
|
|
module_init(sci_init);
|
|
module_exit(sci_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:sh-sci");
|