kevin/linux
1
Fork 0
Code
da07c0cff2
linux/arch/arm/mach-omap2
History
Marc Zyngier da07c0cff2 Fix IGEPv2 second MMC channel power supply 
Commit 72f381ba05 (omap3: Remove VMMC2 regulator on IGEP v2)
removed an unused regulator entry, but left the second MMC channel
(used by the Libertas WLAN module) without link to power regulator.
This causes the SDIO module to fail being detected.

This patch adds the two regulators that actually feed the WLAN module
(1v8 from the TWL4030 VIO LDO, and a fixed 3v3). With that patch, the
second channel is properly detected. Details of the power supply
implementation were kindly provided by Enric Balletbo i Serra.

Also change vmmc1 to use symbolic names instead of direct device
reference.

Tested on an IGEPv2 Rev-B.

Signed-off-by: Marc Zyngier <maz@misterjones.org>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-20 18:48:16 -08:00
..
include/mach omap2+: Initialize omap_irq_base for entry-macro.S from platform code 2010-12-10 09:42:51 -08:00
board-2430sdp.c omap: kill all section mismatch warning for omap2plus_defconfig 2010-12-17 17:25:26 -08:00
board-3430sdp.c Merge branch 'devel-gpio' into omap-for-linus 2010-12-10 11:37:47 -08:00
board-3630sdp.c Merge branch 'devel-gpio' into omap-for-linus 2010-12-10 11:37:47 -08:00
board-4430sdp.c OMAP: GPIO: Implement GPIO as a platform device 2010-12-07 16:26:57 -08:00
board-am3517crane.c OMAP: GPIO: Implement GPIO as a platform device 2010-12-07 16:26:57 -08:00
board-am3517evm.c Merge branch 'devel-gpio' into omap-for-linus 2010-12-10 11:37:47 -08:00
board-apollon.c omap: kill all section mismatch warning for omap2plus_defconfig 2010-12-17 17:25:26 -08:00
board-cm-t35.c omap: kill all section mismatch warning for omap2plus_defconfig 2010-12-17 17:25:26 -08:00
board-cm-t3517.c OMAP: GPIO: Implement GPIO as a platform device 2010-12-07 16:26:57 -08:00
board-devkit8000.c OMAP: GPIO: Implement GPIO as a platform device 2010-12-07 16:26:57 -08:00
board-flash.c OMAP2plus: Fix static function warnings 2010-10-08 10:02:49 -07:00
board-flash.h OMAP2plus: Fix static function warnings 2010-10-08 10:02:49 -07:00
board-generic.c Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 2010-10-25 13:46:56 -07:00
board-h4.c omap: kill all section mismatch warning for omap2plus_defconfig 2010-12-17 17:25:26 -08:00
board-igep0020.c Fix IGEPv2 second MMC channel power supply 2010-12-20 18:48:16 -08:00
board-igep0030.c Merge branch 'devel-gpio' into omap-for-linus 2010-12-10 11:37:47 -08:00
board-ldp.c Merge branch 'devel-gpio' into omap-for-linus 2010-12-10 11:37:47 -08:00
board-n8x0.c Merge branch 'devel-gpio' into omap-for-linus 2010-12-10 11:37:47 -08:00
board-omap3beagle.c Merge branch 'devel-gpio' into omap-for-linus 2010-12-10 11:37:47 -08:00
board-omap3evm.c Merge branch 'devel-gpio' into omap-for-linus 2010-12-10 11:37:47 -08:00
board-omap3logic.c Merge branch 'devel-gpio' into omap-for-linus 2010-12-10 11:37:47 -08:00
board-omap3pandora.c Merge branch 'devel-gpio' into omap-for-linus 2010-12-10 11:37:47 -08:00
board-omap3stalker.c Merge branch 'devel-gpio' into omap-for-linus 2010-12-10 11:37:47 -08:00
board-omap3touchbook.c Merge branch 'devel-gpio' into omap-for-linus 2010-12-10 11:37:47 -08:00
board-omap4panda.c OMAP: GPIO: Implement GPIO as a platform device 2010-12-07 16:26:57 -08:00
board-overo.c Merge branch 'devel-gpio' into omap-for-linus 2010-12-10 11:37:47 -08:00
board-rm680.c arm: omap: add minimal support for RM-680 2010-12-17 15:13:47 -08:00
board-rx51-peripherals.c omap: rx51: Add supplies and data for codec b part ofTLV320AIC34 2010-12-20 18:48:16 -08:00
board-rx51-video.c Added video data to support tvout on rx51 2010-12-20 18:48:16 -08:00
board-rx51.c Merge branch 'devel-board' into omap-for-linus 2010-12-17 15:14:02 -08:00
board-zoom-debugboard.c OMAP2plus: Fix static function warnings 2010-10-08 10:02:49 -07:00
board-zoom-peripherals.c omap: kill all section mismatch warning for omap2plus_defconfig 2010-12-17 17:25:26 -08:00
board-zoom.c Merge branch 'devel-gpio' into omap-for-linus 2010-12-10 11:37:47 -08:00
clkt2xxx_apll.c OMAP2 PRCM: convert OMAP2 PRCM macros to the _SHIFT/_MASK suffixes 2010-05-20 12:31:04 -06:00
clkt2xxx_dpllcore.c
clkt2xxx_osc.c
clkt2xxx_sys.c
clkt2xxx_virt_prcm_set.c OMAP2 clock: fix recursive spinlock attempt when CONFIG_CPU_FREQ=y 2010-05-20 12:31:14 -06:00
clkt34xx_dpll3m2.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clkt_clksel.c OMAP2+ clock: clean up clkt_clksel.c 2010-05-20 12:31:06 -06:00
clkt_dpll.c OMAP2/3/4 clock: fix DPLL multiplier value errors; also copyrights, includes, documentation 2010-02-24 12:15:03 -07:00
clock2xxx.c OMAP2/3 clock: combine OMAP2 & 3 boot-time MPU rate change code 2010-02-24 17:45:15 -07:00
clock2xxx.h OMAP2 clock: split OMAP2420, OMAP2430 clock data into their own files 2010-02-24 12:29:42 -07:00
clock3xxx_data.c I2C: i2c-omap: Change device name: i2c_omap -> omap_i2c 2010-12-20 17:53:04 -08:00
clock3xxx.c OMAP2/3 clock: combine OMAP2 & 3 boot-time MPU rate change code 2010-02-24 17:45:15 -07:00
clock3xxx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock34xx.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock34xx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock36xx.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock36xx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock44xx_data.c I2C: i2c-omap: Change device name: i2c_omap -> omap_i2c 2010-12-20 17:53:04 -08:00
clock44xx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock2420_data.c I2C: i2c-omap: Change device name: i2c_omap -> omap_i2c 2010-12-20 17:53:04 -08:00
clock2430_data.c I2C: i2c-omap: Change device name: i2c_omap -> omap_i2c 2010-12-20 17:53:04 -08:00
clock2430.c OMAP2 clock: split OMAP2420, OMAP2430 clock data into their own files 2010-02-24 12:29:42 -07:00
clock3517.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock3517.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock_common_data.c OMAP3 clock: rename RATE_IN_343X, RATE_IN_3430ES2 to match reality 2010-05-20 12:31:07 -06:00
clock.c OMAP2+: clock: reduce the amount of standard debugging while disabling unused clocks 2010-10-08 11:40:20 -06:00
clock.h OMAP2+ clock: clean up clkt_clksel.c 2010-05-20 12:31:06 -06:00
clockdomain.c OMAP clockdomain: initialize clockdomain registers when the clockdomain layer starts 2010-09-23 17:14:12 -07:00
clockdomains44xx.h OMAP4: PRM: Remove MPU internal code name and apply PRCM naming convention 2010-05-20 12:31:11 -06:00
clockdomains.h
cm4xxx.c OMAP4: PM: Declare idle modules as functional too 2010-09-24 10:23:18 -06:00
cm44xx.h OMAP4: PM: Define additional registers for ES2 2010-09-27 14:02:56 -06:00
cm-regbits-24xx.h OMAP2xxx: hwmod: add I2C hwmods for OMAP2420, 2430 2010-11-09 09:26:08 -08:00
cm-regbits-34xx.h OMAP3: PRCM: Consider UART4 for 3630 chip in prcm_setup_regs 2010-09-29 12:43:00 -07:00
cm-regbits-44xx.h OMAP4: CM & PRM: Update PRCM register bitshifts and masks for ES2 2010-09-27 14:02:55 -06:00
cm.c OMAP24xx: CM: fix mask used for checking IDLEST status 2010-07-26 16:34:28 -06:00
cm.h OMAP4: hwmod & CM: Implement the omap4_cm_wait_module_ready function 2010-05-20 12:31:08 -06:00
common.c OMAP: control: move plat-omap/control.h to mach-omap2/control.h 2010-10-08 11:40:20 -06:00
control.c OMAP: control: move plat-omap/control.h to mach-omap2/control.h 2010-10-08 11:40:20 -06:00
control.h OMAP: control: move plat-omap/control.h to mach-omap2/control.h 2010-10-08 11:40:20 -06:00
cpuidle34xx.c OMAP: control: move plat-omap/control.h to mach-omap2/control.h 2010-10-08 11:40:20 -06:00
devices.c arm: mach-omap2: hsmmc_reset: fix clk_get() error handling 2010-12-20 18:48:15 -08:00
dpll3xxx.c fix typos concerning "hierarchy" 2010-06-16 18:03:14 +02:00
dsp.c omap: add dsp platform device 2010-10-05 12:05:11 -07:00
emu.c
gpio.c OMAP2+: GPIO: device registration 2010-12-07 16:26:57 -08:00
gpmc-nand.c omap3 nand: cleanup virtual address usages 2010-08-02 15:30:38 +03:00
gpmc-onenand.c
gpmc-smc91x.c
gpmc-smsc911x.c ARM: OMAP3LOGIC: Add generic smsc911x support when connected to GPMC 2010-09-28 11:39:18 -07:00
gpmc.c omap3 nand: cleanup virtual address usages 2010-08-02 15:30:38 +03:00
hsmmc.c OMAP: control: move plat-omap/control.h to mach-omap2/control.h 2010-10-08 11:40:20 -06:00
hsmmc.h Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 2010-10-25 13:46:56 -07:00
i2c.c omap: mux: Convert 2420 platform init code to use new mux code 2010-07-05 16:31:40 +03:00
id.c OMAP: control: move plat-omap/control.h to mach-omap2/control.h 2010-10-08 11:40:20 -06:00
io.c Merge branch 'devel-board' into omap-for-linus 2010-12-17 15:14:02 -08:00
io.h OMAP: plat-omap: Fix static function warnings 2010-10-08 10:12:38 -07:00
iommu2.c omap iommu: move iommu_disable at fault to the above layer 2010-06-29 07:55:07 +03:00
irq.c OMAP3: add comments for erratas i540 and i478 workarounds 2010-12-17 16:48:20 -08:00
Kconfig arm: mach-omap2: Kconfig: fix incorrect option 2010-12-20 18:48:15 -08:00
mailbox.c arm: remove cast from void* 2010-09-28 09:54:28 -07:00
Makefile OMAP4: enable smc instruction in new assembler versions 2010-12-17 17:28:07 -08:00
Makefile.boot
mcbsp.c OMAP: McBSP: Remove null omap44xx ops comment 2010-10-08 11:40:21 -06:00
mux34xx.c OMAP: mux: Add __func__ macro to pr_xxx macros 2010-11-17 12:01:54 +01:00
mux34xx.h
mux44xx.c OMAP: mux: Add __func__ macro to pr_xxx macros 2010-11-17 12:01:54 +01:00
mux44xx.h OMAP4: mux: Add CBS package data for OMAP4430 ES2 2010-11-17 12:01:52 +01:00
mux2420.c OMAP: mux: Add __func__ macro to pr_xxx macros 2010-11-17 12:01:54 +01:00
mux2420.h omap: mux: Add data for 2420 2010-07-05 16:31:36 +03:00
mux2430.c OMAP: mux: Add __func__ macro to pr_xxx macros 2010-11-17 12:01:54 +01:00
mux2430.h omap: mux: Add data for 2430 2010-07-05 16:31:36 +03:00
mux.c OMAP: mux: Add __func__ macro to pr_xxx macros 2010-11-17 12:01:54 +01:00
mux.h arm: mach-omap2: remove NULL board_mux from board files 2010-12-02 17:03:41 -08:00
omap4-common.c Merge branch 'l2x0-pull-rmk' of git://dev.omapzoom.org/pub/scm/santosh/kernel-omap4-base into devel-stable 2010-10-28 14:42:06 +01:00
omap44xx-smc.S omap4: Add smc API to read AuxCoreBoot0 register 2010-08-02 13:18:18 +03:00
omap_hwmod_3xxx_data.c OMAP3: hwmod data: Add GPIO 2010-12-07 16:26:57 -08:00
omap_hwmod_44xx_data.c OMAP4: hwmod data: Add GPIO 2010-12-07 16:26:57 -08:00
omap_hwmod_2420_data.c OMAP2420: hwmod data: Add GPIO 2010-12-07 16:26:56 -08:00
omap_hwmod_2430_data.c omap2430: hwmod: remove stray declaration 2010-12-20 18:48:16 -08:00
omap_hwmod_common_data.c OMAP: hwmod data: add class for IVA hwmods 2010-07-26 16:34:31 -06:00
omap_hwmod_common_data.h OMAP: hwmod data: add class for IVA hwmods 2010-07-26 16:34:31 -06:00
omap_hwmod.c omap: hwmod: Handle modules with 16bit registers 2010-10-08 10:23:22 -07:00
omap-headsmp.S omap4: Add smc API to read AuxCoreBoot0 register 2010-08-02 13:18:18 +03:00
omap-hotplug.c omap4: hotplug: Add basic CPU hotplug support 2010-08-02 13:18:19 +03:00
omap-iommu.c omap iommu: update ducati mmu irq define name 2010-06-29 07:55:08 +03:00
omap-smp.c omap: Fix sev instruction usage for multi-omap 2010-08-16 09:22:04 +03:00
opp2xxx.h
opp2420_data.c
opp2430_data.c
pm24xx.c OMAP2+: PM/serial: fix console semaphore acquire during suspend 2010-12-09 16:41:29 -08:00
pm34xx.c OMAP2+: PM/serial: fix console semaphore acquire during suspend 2010-12-09 16:41:29 -08:00
pm44xx.c omap4: suspend: Add basic system suspend support 2010-08-02 13:18:18 +03:00
pm_bus.c OMAP2+: PM: initial runtime PM core support 2010-09-21 11:51:23 -07:00
pm-debug.c omap: PM debug: fix wake-on-timer debugfs dependency 2010-12-02 17:08:48 -08:00
pm.c OMAP4: pm: Change l3_main to l3_main_1 during bus device init 2010-09-23 17:14:16 -07:00
pm.h OMAP: PM: Fix build when CONFIG_PM_DEBUG isn't set 2010-10-01 13:50:34 -07:00
powerdomain.c OMAP2: powerdomain: Add break in switch statement 2010-08-03 10:21:07 +03:00
powerdomains24xx.h
powerdomains34xx.h OMAP3: add comments for erratas i540 and i478 workarounds 2010-12-17 16:48:20 -08:00
powerdomains44xx.h OMAP4: powerdomain: Update DSS logic state for ES2 2010-09-27 14:02:56 -06:00
powerdomains.h
prcm-common.h OMAP2: PRCM: fix some SHIFT macros that were actually bitmasks 2010-12-10 18:04:43 -08:00
prcm.c OMAP: control: move plat-omap/control.h to mach-omap2/control.h 2010-10-08 11:40:20 -06:00
prm2xxx_3xxx.c OMAP2/3: PRM: add module hard reset support 2010-09-21 15:12:40 -06:00
prm44xx.c OMAP4: PRM: add module hard reset support 2010-09-21 15:12:21 -06:00
prm44xx.h OMAP4: PM: Define additional registers for ES2 2010-09-27 14:02:56 -06:00
prm-regbits-24xx.h OMAP2 PRCM: convert OMAP2 PRCM macros to the _SHIFT/_MASK suffixes 2010-05-20 12:31:04 -06:00
prm-regbits-34xx.h OMAP3: hwmod: add I2C hwmods for OMAP3430 2010-11-09 09:29:13 -08:00
prm-regbits-44xx.h OMAP4: CM & PRM: Update PRCM register bitshifts and masks for ES2 2010-09-27 14:02:55 -06:00
prm.h OMAP2/3: PRM: add module hard reset support 2010-09-21 15:12:40 -06:00
sdram-hynix-h8mbx00u0mer-0em.h
sdram-micron-mt46h32m32lf-6.h
sdram-nokia.c arm: omap: sdram-nokia: add 97.6/195.2 MHz timing data 2010-12-17 15:13:46 -08:00
sdram-nokia.h arm: omap: add sdram-nokia.h 2010-12-17 15:13:44 -08:00
sdram-numonyx-m65kxxxxam.h
sdram-qimonda-hyb18m512160af-6.h
sdrc2xxx.c
sdrc.c omap2/3/4: ioremap omap_globals module 2010-02-23 10:57:40 -08:00
sdrc.h
serial.c omap: Serial: Define register access modes in LCR 2010-11-30 14:11:49 -08:00
sleep24xx.S
sleep34xx.S OMAP: control: move plat-omap/control.h to mach-omap2/control.h 2010-10-08 11:40:20 -06:00
sram34xx.S omap3: Prevent SDRC deadlock when L3 is changing frequency 2010-09-27 14:02:59 -06:00
sram242x.S
sram243x.S
timer-gp.c arm: omap2: timer-gp: delete unused variable 2010-11-24 16:49:42 -08:00
timer-gp.h OMAP2plus: Fix static function warnings 2010-10-08 10:02:49 -07:00
timer-mpu.c omap4: Use irq line defines from irq-44xx.h 2010-02-23 15:29:08 -08:00
usb-ehci.c omap: mux: Remove old mux code 2010-07-05 16:31:40 +03:00
usb-fs.c OMAP: control: move plat-omap/control.h to mach-omap2/control.h 2010-10-08 11:40:20 -06:00
usb-musb.c USB: AM35x: Add musb support 2010-10-22 10:22:16 -07:00
usb-tusb6010.c omap: mux: Convert 2420 platform init code to use new mux code 2010-07-05 16:31:40 +03:00