6d38c4b4f1
Commit 60d24ee "Added video data to support tvout on rx51" added code that
tries to assign gpio 40 as OMAP DSS reset_gpio for tvout. This is wrong
since this gpio has nothing to do with OMAP DSS but it is used to control
one switch that selects is the audio jack connected to tvout or audio
circuitry.
This switch is already supported by the RX51 ASoC driver so there is no need
to control it elsewhere. Switch is contolled with ALSA control
'Jack Function' and tvout can be selected with following example:
amixer -D hw:0 set 'Jack Function' 'TV-OUT'
Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Cc: Srikar <ext-srikar.1.bhavanarayana@nokia.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
118 lines
2.7 KiB
C
118 lines
2.7 KiB
C
/*
|
|
* linux/arch/arm/mach-omap2/board-rx51-video.c
|
|
*
|
|
* Copyright (C) 2010 Nokia
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/mm.h>
|
|
#include <asm/mach-types.h>
|
|
#include <plat/display.h>
|
|
#include <plat/vram.h>
|
|
#include <plat/mcspi.h>
|
|
|
|
#include <mach/board-rx51.h>
|
|
|
|
#include "mux.h"
|
|
|
|
#define RX51_LCD_RESET_GPIO 90
|
|
|
|
#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
|
|
|
|
static int rx51_lcd_enable(struct omap_dss_device *dssdev)
|
|
{
|
|
gpio_set_value(dssdev->reset_gpio, 1);
|
|
return 0;
|
|
}
|
|
|
|
static void rx51_lcd_disable(struct omap_dss_device *dssdev)
|
|
{
|
|
gpio_set_value(dssdev->reset_gpio, 0);
|
|
}
|
|
|
|
static struct omap_dss_device rx51_lcd_device = {
|
|
.name = "lcd",
|
|
.driver_name = "panel-acx565akm",
|
|
.type = OMAP_DISPLAY_TYPE_SDI,
|
|
.phy.sdi.datapairs = 2,
|
|
.reset_gpio = RX51_LCD_RESET_GPIO,
|
|
.platform_enable = rx51_lcd_enable,
|
|
.platform_disable = rx51_lcd_disable,
|
|
};
|
|
|
|
static struct omap_dss_device rx51_tv_device = {
|
|
.name = "tv",
|
|
.type = OMAP_DISPLAY_TYPE_VENC,
|
|
.driver_name = "venc",
|
|
.phy.venc.type = OMAP_DSS_VENC_TYPE_COMPOSITE,
|
|
};
|
|
|
|
static struct omap_dss_device *rx51_dss_devices[] = {
|
|
&rx51_lcd_device,
|
|
&rx51_tv_device,
|
|
};
|
|
|
|
static struct omap_dss_board_info rx51_dss_board_info = {
|
|
.num_devices = ARRAY_SIZE(rx51_dss_devices),
|
|
.devices = rx51_dss_devices,
|
|
.default_device = &rx51_lcd_device,
|
|
};
|
|
|
|
struct platform_device rx51_display_device = {
|
|
.name = "omapdss",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &rx51_dss_board_info,
|
|
},
|
|
};
|
|
|
|
static struct platform_device *rx51_video_devices[] __initdata = {
|
|
&rx51_display_device,
|
|
};
|
|
|
|
static int __init rx51_video_init(void)
|
|
{
|
|
if (!machine_is_nokia_rx51())
|
|
return 0;
|
|
|
|
if (omap_mux_init_gpio(RX51_LCD_RESET_GPIO, OMAP_PIN_OUTPUT)) {
|
|
pr_err("%s cannot configure MUX for LCD RESET\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
if (gpio_request(RX51_LCD_RESET_GPIO, "LCD ACX565AKM reset")) {
|
|
pr_err("%s failed to get LCD Reset GPIO\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
gpio_direction_output(RX51_LCD_RESET_GPIO, 1);
|
|
|
|
platform_add_devices(rx51_video_devices,
|
|
ARRAY_SIZE(rx51_video_devices));
|
|
return 0;
|
|
}
|
|
|
|
subsys_initcall(rx51_video_init);
|
|
|
|
void __init rx51_video_mem_init(void)
|
|
{
|
|
/*
|
|
* GFX 864x480x32bpp
|
|
* VID1/2 1280x720x32bpp double buffered
|
|
*/
|
|
omap_vram_set_sdram_vram(PAGE_ALIGN(864 * 480 * 4) +
|
|
2 * PAGE_ALIGN(1280 * 720 * 4 * 2), 0);
|
|
}
|
|
|
|
#else
|
|
void __init rx51_video_mem_init(void) { }
|
|
#endif /* defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) */
|