1
linux/include/asm-i386/apic.h
Rusty Russell 13623d7930 [PATCH] paravirt: Add APIC accessors to paravirt-ops.
Add APIC accessors to paravirt-ops.  Unfortunately, we need two write
functions, as some older broken hardware requires workarounds for
Pentium APIC errata - this is the purpose of apic_write_atomic.

AK: replaced __inline with inline

Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
2006-12-07 02:14:08 +01:00

132 lines
3.2 KiB
C

#ifndef __ASM_APIC_H
#define __ASM_APIC_H
#include <linux/pm.h>
#include <asm/fixmap.h>
#include <asm/apicdef.h>
#include <asm/processor.h>
#include <asm/system.h>
#define Dprintk(x...)
/*
* Debugging macros
*/
#define APIC_QUIET 0
#define APIC_VERBOSE 1
#define APIC_DEBUG 2
extern int apic_verbosity;
/*
* Define the default level of output to be very little
* This can be turned up by using apic=verbose for more
* information and apic=debug for _lots_ of information.
* apic_verbosity is defined in apic.c
*/
#define apic_printk(v, s, a...) do { \
if ((v) <= apic_verbosity) \
printk(s, ##a); \
} while (0)
extern void generic_apic_probe(void);
#ifdef CONFIG_X86_LOCAL_APIC
/*
* Basic functions accessing APICs.
*/
#ifdef CONFIG_PARAVIRT
#include <asm/paravirt.h>
#else
#define apic_write native_apic_write
#define apic_write_atomic native_apic_write_atomic
#define apic_read native_apic_read
#endif
static __inline fastcall void native_apic_write(unsigned long reg,
unsigned long v)
{
*((volatile unsigned long *)(APIC_BASE+reg)) = v;
}
static __inline fastcall void native_apic_write_atomic(unsigned long reg,
unsigned long v)
{
xchg((volatile unsigned long *)(APIC_BASE+reg), v);
}
static __inline fastcall unsigned long native_apic_read(unsigned long reg)
{
return *((volatile unsigned long *)(APIC_BASE+reg));
}
static __inline__ void apic_wait_icr_idle(void)
{
while ( apic_read( APIC_ICR ) & APIC_ICR_BUSY )
cpu_relax();
}
int get_physical_broadcast(void);
#ifdef CONFIG_X86_GOOD_APIC
# define FORCE_READ_AROUND_WRITE 0
# define apic_read_around(x)
# define apic_write_around(x,y) apic_write((x),(y))
#else
# define FORCE_READ_AROUND_WRITE 1
# define apic_read_around(x) apic_read(x)
# define apic_write_around(x,y) apic_write_atomic((x),(y))
#endif
static inline void ack_APIC_irq(void)
{
/*
* ack_APIC_irq() actually gets compiled as a single instruction:
* - a single rmw on Pentium/82489DX
* - a single write on P6+ cores (CONFIG_X86_GOOD_APIC)
* ... yummie.
*/
/* Docs say use 0 for future compatibility */
apic_write_around(APIC_EOI, 0);
}
extern void (*wait_timer_tick)(void);
extern int get_maxlvt(void);
extern void clear_local_APIC(void);
extern void connect_bsp_APIC (void);
extern void disconnect_bsp_APIC (int virt_wire_setup);
extern void disable_local_APIC (void);
extern void lapic_shutdown (void);
extern int verify_local_APIC (void);
extern void cache_APIC_registers (void);
extern void sync_Arb_IDs (void);
extern void init_bsp_APIC (void);
extern void setup_local_APIC (void);
extern void init_apic_mappings (void);
extern void smp_local_timer_interrupt (void);
extern void setup_boot_APIC_clock (void);
extern void setup_secondary_APIC_clock (void);
extern int APIC_init_uniprocessor (void);
extern void disable_APIC_timer(void);
extern void enable_APIC_timer(void);
extern void enable_NMI_through_LVT0 (void * dummy);
void smp_send_timer_broadcast_ipi(void);
void switch_APIC_timer_to_ipi(void *cpumask);
void switch_ipi_to_APIC_timer(void *cpumask);
#define ARCH_APICTIMER_STOPS_ON_C3 1
extern int timer_over_8254;
#else /* !CONFIG_X86_LOCAL_APIC */
static inline void lapic_shutdown(void) { }
#endif /* !CONFIG_X86_LOCAL_APIC */
#endif /* __ASM_APIC_H */