1
linux/drivers/rtc/rtc-isl1208.c
Biju Das 43696b3a9e rtc: isl1208: Update correct procedure for clearing alarm
As per the latest HW manual[1], there is an internal delay(~250 microsec)
from setting ALME = 0 to disabling the alarm function, so the user must
add a short delay of greater than 250µs between setting ALME = 0 and
clearing ALM.

Currently setting of ALME = 0 is done after clearing the ALM, so just
reverse the operation and add a delay of 275 microsec.

[1]https://www.renesas.com/us/en/document/dst/raa215300-datasheet?r=1506351

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20240618152635.48956-3-biju.das.jz@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-06-28 00:34:21 +02:00

989 lines
25 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Intersil ISL1208 rtc class driver
*
* Copyright 2005,2006 Hebert Valerio Riedel <hvr@gnu.org>
*/
#include <linux/bcd.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/rtc.h>
/* Register map */
/* rtc section */
#define ISL1208_REG_SC 0x00
#define ISL1208_REG_MN 0x01
#define ISL1208_REG_HR 0x02
#define ISL1208_REG_HR_MIL (1<<7) /* 24h/12h mode */
#define ISL1208_REG_HR_PM (1<<5) /* PM/AM bit in 12h mode */
#define ISL1208_REG_DT 0x03
#define ISL1208_REG_MO 0x04
#define ISL1208_REG_YR 0x05
#define ISL1208_REG_DW 0x06
#define ISL1208_RTC_SECTION_LEN 7
/* control/status section */
#define ISL1208_REG_SR 0x07
#define ISL1208_REG_SR_ARST (1<<7) /* auto reset */
#define ISL1208_REG_SR_XTOSCB (1<<6) /* crystal oscillator */
#define ISL1208_REG_SR_WRTC (1<<4) /* write rtc */
#define ISL1208_REG_SR_EVT (1<<3) /* event */
#define ISL1208_REG_SR_ALM (1<<2) /* alarm */
#define ISL1208_REG_SR_BAT (1<<1) /* battery */
#define ISL1208_REG_SR_RTCF (1<<0) /* rtc fail */
#define ISL1208_REG_INT 0x08
#define ISL1208_REG_INT_ALME (1<<6) /* alarm enable */
#define ISL1208_REG_INT_IM (1<<7) /* interrupt/alarm mode */
#define ISL1219_REG_EV 0x09
#define ISL1219_REG_EV_EVEN (1<<4) /* event detection enable */
#define ISL1219_REG_EV_EVIENB (1<<7) /* event in pull-up disable */
#define ISL1208_REG_ATR 0x0a
#define ISL1208_REG_DTR 0x0b
/* alarm section */
#define ISL1208_REG_SCA 0x0c
#define ISL1208_REG_MNA 0x0d
#define ISL1208_REG_HRA 0x0e
#define ISL1208_REG_DTA 0x0f
#define ISL1208_REG_MOA 0x10
#define ISL1208_REG_DWA 0x11
#define ISL1208_ALARM_SECTION_LEN 6
/* user section */
#define ISL1208_REG_USR1 0x12
#define ISL1208_REG_USR2 0x13
#define ISL1208_USR_SECTION_LEN 2
/* event section */
#define ISL1219_REG_SCT 0x14
#define ISL1219_REG_MNT 0x15
#define ISL1219_REG_HRT 0x16
#define ISL1219_REG_DTT 0x17
#define ISL1219_REG_MOT 0x18
#define ISL1219_REG_YRT 0x19
#define ISL1219_EVT_SECTION_LEN 6
static struct i2c_driver isl1208_driver;
/* Chip capabilities table */
struct isl1208_config {
unsigned int nvmem_length;
unsigned has_tamper:1;
unsigned has_timestamp:1;
unsigned has_inverted_osc_bit:1;
};
static const struct isl1208_config config_isl1208 = {
.nvmem_length = 2,
.has_tamper = false,
.has_timestamp = false
};
static const struct isl1208_config config_isl1209 = {
.nvmem_length = 2,
.has_tamper = true,
.has_timestamp = false
};
static const struct isl1208_config config_isl1218 = {
.nvmem_length = 8,
.has_tamper = false,
.has_timestamp = false
};
static const struct isl1208_config config_isl1219 = {
.nvmem_length = 2,
.has_tamper = true,
.has_timestamp = true
};
static const struct isl1208_config config_raa215300_a0 = {
.nvmem_length = 2,
.has_tamper = false,
.has_timestamp = false,
.has_inverted_osc_bit = true
};
static const struct i2c_device_id isl1208_id[] = {
{ "isl1208", .driver_data = (kernel_ulong_t)&config_isl1208 },
{ "isl1209", .driver_data = (kernel_ulong_t)&config_isl1209 },
{ "isl1218", .driver_data = (kernel_ulong_t)&config_isl1218 },
{ "isl1219", .driver_data = (kernel_ulong_t)&config_isl1219 },
{ "raa215300_a0", .driver_data = (kernel_ulong_t)&config_raa215300_a0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, isl1208_id);
static const __maybe_unused struct of_device_id isl1208_of_match[] = {
{ .compatible = "isil,isl1208", .data = &config_isl1208 },
{ .compatible = "isil,isl1209", .data = &config_isl1209 },
{ .compatible = "isil,isl1218", .data = &config_isl1218 },
{ .compatible = "isil,isl1219", .data = &config_isl1219 },
{ }
};
MODULE_DEVICE_TABLE(of, isl1208_of_match);
/* Device state */
struct isl1208_state {
struct nvmem_config nvmem_config;
struct rtc_device *rtc;
const struct isl1208_config *config;
};
/* block read */
static int
isl1208_i2c_read_regs(struct i2c_client *client, u8 reg, u8 buf[],
unsigned len)
{
int ret;
WARN_ON(reg > ISL1219_REG_YRT);
WARN_ON(reg + len > ISL1219_REG_YRT + 1);
ret = i2c_smbus_read_i2c_block_data(client, reg, len, buf);
return (ret < 0) ? ret : 0;
}
/* block write */
static int
isl1208_i2c_set_regs(struct i2c_client *client, u8 reg, u8 const buf[],
unsigned len)
{
int ret;
WARN_ON(reg > ISL1219_REG_YRT);
WARN_ON(reg + len > ISL1219_REG_YRT + 1);
ret = i2c_smbus_write_i2c_block_data(client, reg, len, buf);
return (ret < 0) ? ret : 0;
}
/* simple check to see whether we have a isl1208 */
static int
isl1208_i2c_validate_client(struct i2c_client *client)
{
u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
u8 zero_mask[ISL1208_RTC_SECTION_LEN] = {
0x80, 0x80, 0x40, 0xc0, 0xe0, 0x00, 0xf8
};
int i;
int ret;
ret = isl1208_i2c_read_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN);
if (ret < 0)
return ret;
for (i = 0; i < ISL1208_RTC_SECTION_LEN; ++i) {
if (regs[i] & zero_mask[i]) /* check if bits are cleared */
return -ENODEV;
}
return 0;
}
static int isl1208_set_xtoscb(struct i2c_client *client, int sr, int xtosb_val)
{
/* Do nothing if bit is already set to desired value */
if (!!(sr & ISL1208_REG_SR_XTOSCB) == xtosb_val)
return 0;
if (xtosb_val)
sr |= ISL1208_REG_SR_XTOSCB;
else
sr &= ~ISL1208_REG_SR_XTOSCB;
return i2c_smbus_write_byte_data(client, ISL1208_REG_SR, sr);
}
static int
isl1208_i2c_get_sr(struct i2c_client *client)
{
return i2c_smbus_read_byte_data(client, ISL1208_REG_SR);
}
static int
isl1208_i2c_get_atr(struct i2c_client *client)
{
int atr = i2c_smbus_read_byte_data(client, ISL1208_REG_ATR);
if (atr < 0)
return atr;
/* The 6bit value in the ATR register controls the load
* capacitance C_load * in steps of 0.25pF
*
* bit (1<<5) of the ATR register is inverted
*
* C_load(ATR=0x20) = 4.50pF
* C_load(ATR=0x00) = 12.50pF
* C_load(ATR=0x1f) = 20.25pF
*
*/
atr &= 0x3f; /* mask out lsb */
atr ^= 1 << 5; /* invert 6th bit */
atr += 2 * 9; /* add offset of 4.5pF; unit[atr] = 0.25pF */
return atr;
}
/* returns adjustment value + 100 */
static int
isl1208_i2c_get_dtr(struct i2c_client *client)
{
int dtr = i2c_smbus_read_byte_data(client, ISL1208_REG_DTR);
if (dtr < 0)
return -EIO;
/* dtr encodes adjustments of {-60,-40,-20,0,20,40,60} ppm */
dtr = ((dtr & 0x3) * 20) * (dtr & (1 << 2) ? -1 : 1);
return dtr + 100;
}
static int
isl1208_i2c_get_usr(struct i2c_client *client)
{
u8 buf[ISL1208_USR_SECTION_LEN] = { 0, };
int ret;
ret = isl1208_i2c_read_regs(client, ISL1208_REG_USR1, buf,
ISL1208_USR_SECTION_LEN);
if (ret < 0)
return ret;
return (buf[1] << 8) | buf[0];
}
static int
isl1208_i2c_set_usr(struct i2c_client *client, u16 usr)
{
u8 buf[ISL1208_USR_SECTION_LEN];
buf[0] = usr & 0xff;
buf[1] = (usr >> 8) & 0xff;
return isl1208_i2c_set_regs(client, ISL1208_REG_USR1, buf,
ISL1208_USR_SECTION_LEN);
}
static int
isl1208_rtc_toggle_alarm(struct i2c_client *client, int enable)
{
int icr = i2c_smbus_read_byte_data(client, ISL1208_REG_INT);
if (icr < 0) {
dev_err(&client->dev, "%s: reading INT failed\n", __func__);
return icr;
}
if (enable)
icr |= ISL1208_REG_INT_ALME | ISL1208_REG_INT_IM;
else
icr &= ~(ISL1208_REG_INT_ALME | ISL1208_REG_INT_IM);
icr = i2c_smbus_write_byte_data(client, ISL1208_REG_INT, icr);
if (icr < 0) {
dev_err(&client->dev, "%s: writing INT failed\n", __func__);
return icr;
}
return 0;
}
static int
isl1208_rtc_proc(struct device *dev, struct seq_file *seq)
{
struct i2c_client *const client = to_i2c_client(dev);
int sr, dtr, atr, usr;
sr = isl1208_i2c_get_sr(client);
if (sr < 0) {
dev_err(&client->dev, "%s: reading SR failed\n", __func__);
return sr;
}
seq_printf(seq, "status_reg\t:%s%s%s%s%s%s (0x%.2x)\n",
(sr & ISL1208_REG_SR_RTCF) ? " RTCF" : "",
(sr & ISL1208_REG_SR_BAT) ? " BAT" : "",
(sr & ISL1208_REG_SR_ALM) ? " ALM" : "",
(sr & ISL1208_REG_SR_WRTC) ? " WRTC" : "",
(sr & ISL1208_REG_SR_XTOSCB) ? " XTOSCB" : "",
(sr & ISL1208_REG_SR_ARST) ? " ARST" : "", sr);
seq_printf(seq, "batt_status\t: %s\n",
(sr & ISL1208_REG_SR_RTCF) ? "bad" : "okay");
dtr = isl1208_i2c_get_dtr(client);
if (dtr >= 0)
seq_printf(seq, "digital_trim\t: %d ppm\n", dtr - 100);
atr = isl1208_i2c_get_atr(client);
if (atr >= 0)
seq_printf(seq, "analog_trim\t: %d.%.2d pF\n",
atr >> 2, (atr & 0x3) * 25);
usr = isl1208_i2c_get_usr(client);
if (usr >= 0)
seq_printf(seq, "user_data\t: 0x%.4x\n", usr);
return 0;
}
static int
isl1208_i2c_read_time(struct i2c_client *client, struct rtc_time *tm)
{
int sr;
u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
sr = isl1208_i2c_get_sr(client);
if (sr < 0) {
dev_err(&client->dev, "%s: reading SR failed\n", __func__);
return -EIO;
}
sr = isl1208_i2c_read_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN);
if (sr < 0) {
dev_err(&client->dev, "%s: reading RTC section failed\n",
__func__);
return sr;
}
tm->tm_sec = bcd2bin(regs[ISL1208_REG_SC]);
tm->tm_min = bcd2bin(regs[ISL1208_REG_MN]);
/* HR field has a more complex interpretation */
{
const u8 _hr = regs[ISL1208_REG_HR];
if (_hr & ISL1208_REG_HR_MIL) /* 24h format */
tm->tm_hour = bcd2bin(_hr & 0x3f);
else {
/* 12h format */
tm->tm_hour = bcd2bin(_hr & 0x1f);
if (_hr & ISL1208_REG_HR_PM) /* PM flag set */
tm->tm_hour += 12;
}
}
tm->tm_mday = bcd2bin(regs[ISL1208_REG_DT]);
tm->tm_mon = bcd2bin(regs[ISL1208_REG_MO]) - 1; /* rtc starts at 1 */
tm->tm_year = bcd2bin(regs[ISL1208_REG_YR]) + 100;
tm->tm_wday = bcd2bin(regs[ISL1208_REG_DW]);
return 0;
}
static int
isl1208_i2c_read_alarm(struct i2c_client *client, struct rtc_wkalrm *alarm)
{
struct rtc_time *const tm = &alarm->time;
u8 regs[ISL1208_ALARM_SECTION_LEN] = { 0, };
int icr, yr, sr = isl1208_i2c_get_sr(client);
if (sr < 0) {
dev_err(&client->dev, "%s: reading SR failed\n", __func__);
return sr;
}
sr = isl1208_i2c_read_regs(client, ISL1208_REG_SCA, regs,
ISL1208_ALARM_SECTION_LEN);
if (sr < 0) {
dev_err(&client->dev, "%s: reading alarm section failed\n",
__func__);
return sr;
}
/* MSB of each alarm register is an enable bit */
tm->tm_sec = bcd2bin(regs[ISL1208_REG_SCA - ISL1208_REG_SCA] & 0x7f);
tm->tm_min = bcd2bin(regs[ISL1208_REG_MNA - ISL1208_REG_SCA] & 0x7f);
tm->tm_hour = bcd2bin(regs[ISL1208_REG_HRA - ISL1208_REG_SCA] & 0x3f);
tm->tm_mday = bcd2bin(regs[ISL1208_REG_DTA - ISL1208_REG_SCA] & 0x3f);
tm->tm_mon =
bcd2bin(regs[ISL1208_REG_MOA - ISL1208_REG_SCA] & 0x1f) - 1;
tm->tm_wday = bcd2bin(regs[ISL1208_REG_DWA - ISL1208_REG_SCA] & 0x03);
/* The alarm doesn't store the year so get it from the rtc section */
yr = i2c_smbus_read_byte_data(client, ISL1208_REG_YR);
if (yr < 0) {
dev_err(&client->dev, "%s: reading RTC YR failed\n", __func__);
return yr;
}
tm->tm_year = bcd2bin(yr) + 100;
icr = i2c_smbus_read_byte_data(client, ISL1208_REG_INT);
if (icr < 0) {
dev_err(&client->dev, "%s: reading INT failed\n", __func__);
return icr;
}
alarm->enabled = !!(icr & ISL1208_REG_INT_ALME);
return 0;
}
static int
isl1208_i2c_set_alarm(struct i2c_client *client, struct rtc_wkalrm *alarm)
{
struct rtc_time *alarm_tm = &alarm->time;
u8 regs[ISL1208_ALARM_SECTION_LEN] = { 0, };
const int offs = ISL1208_REG_SCA;
struct rtc_time rtc_tm;
int err, enable;
err = isl1208_i2c_read_time(client, &rtc_tm);
if (err)
return err;
/* If the alarm time is before the current time disable the alarm */
if (!alarm->enabled || rtc_tm_sub(alarm_tm, &rtc_tm) <= 0)
enable = 0x00;
else
enable = 0x80;
/* Program the alarm and enable it for each setting */
regs[ISL1208_REG_SCA - offs] = bin2bcd(alarm_tm->tm_sec) | enable;
regs[ISL1208_REG_MNA - offs] = bin2bcd(alarm_tm->tm_min) | enable;
regs[ISL1208_REG_HRA - offs] = bin2bcd(alarm_tm->tm_hour) |
ISL1208_REG_HR_MIL | enable;
regs[ISL1208_REG_DTA - offs] = bin2bcd(alarm_tm->tm_mday) | enable;
regs[ISL1208_REG_MOA - offs] = bin2bcd(alarm_tm->tm_mon + 1) | enable;
regs[ISL1208_REG_DWA - offs] = bin2bcd(alarm_tm->tm_wday & 7) | enable;
/* write ALARM registers */
err = isl1208_i2c_set_regs(client, offs, regs,
ISL1208_ALARM_SECTION_LEN);
if (err < 0) {
dev_err(&client->dev, "%s: writing ALARM section failed\n",
__func__);
return err;
}
err = isl1208_rtc_toggle_alarm(client, enable);
if (err)
return err;
return 0;
}
static int
isl1208_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
return isl1208_i2c_read_time(to_i2c_client(dev), tm);
}
static int
isl1208_i2c_set_time(struct i2c_client *client, struct rtc_time const *tm)
{
int sr;
u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
/* The clock has an 8 bit wide bcd-coded register (they never learn)
* for the year. tm_year is an offset from 1900 and we are interested
* in the 2000-2099 range, so any value less than 100 is invalid.
*/
if (tm->tm_year < 100)
return -EINVAL;
regs[ISL1208_REG_SC] = bin2bcd(tm->tm_sec);
regs[ISL1208_REG_MN] = bin2bcd(tm->tm_min);
regs[ISL1208_REG_HR] = bin2bcd(tm->tm_hour) | ISL1208_REG_HR_MIL;
regs[ISL1208_REG_DT] = bin2bcd(tm->tm_mday);
regs[ISL1208_REG_MO] = bin2bcd(tm->tm_mon + 1);
regs[ISL1208_REG_YR] = bin2bcd(tm->tm_year - 100);
regs[ISL1208_REG_DW] = bin2bcd(tm->tm_wday & 7);
sr = isl1208_i2c_get_sr(client);
if (sr < 0) {
dev_err(&client->dev, "%s: reading SR failed\n", __func__);
return sr;
}
/* set WRTC */
sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR,
sr | ISL1208_REG_SR_WRTC);
if (sr < 0) {
dev_err(&client->dev, "%s: writing SR failed\n", __func__);
return sr;
}
/* write RTC registers */
sr = isl1208_i2c_set_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN);
if (sr < 0) {
dev_err(&client->dev, "%s: writing RTC section failed\n",
__func__);
return sr;
}
/* clear WRTC again */
sr = isl1208_i2c_get_sr(client);
if (sr < 0) {
dev_err(&client->dev, "%s: reading SR failed\n", __func__);
return sr;
}
sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR,
sr & ~ISL1208_REG_SR_WRTC);
if (sr < 0) {
dev_err(&client->dev, "%s: writing SR failed\n", __func__);
return sr;
}
return 0;
}
static int
isl1208_rtc_set_time(struct device *dev, struct rtc_time *tm)
{
return isl1208_i2c_set_time(to_i2c_client(dev), tm);
}
static int
isl1208_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
{
return isl1208_i2c_read_alarm(to_i2c_client(dev), alarm);
}
static int
isl1208_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
{
return isl1208_i2c_set_alarm(to_i2c_client(dev), alarm);
}
static ssize_t timestamp0_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev->parent);
int sr;
sr = isl1208_i2c_get_sr(client);
if (sr < 0) {
dev_err(dev, "%s: reading SR failed\n", __func__);
return sr;
}
sr &= ~ISL1208_REG_SR_EVT;
sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR, sr);
if (sr < 0)
dev_err(dev, "%s: writing SR failed\n",
__func__);
return count;
};
static ssize_t timestamp0_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct i2c_client *client = to_i2c_client(dev->parent);
u8 regs[ISL1219_EVT_SECTION_LEN] = { 0, };
struct rtc_time tm;
int sr;
sr = isl1208_i2c_get_sr(client);
if (sr < 0) {
dev_err(dev, "%s: reading SR failed\n", __func__);
return sr;
}
if (!(sr & ISL1208_REG_SR_EVT))
return 0;
sr = isl1208_i2c_read_regs(client, ISL1219_REG_SCT, regs,
ISL1219_EVT_SECTION_LEN);
if (sr < 0) {
dev_err(dev, "%s: reading event section failed\n",
__func__);
return 0;
}
/* MSB of each alarm register is an enable bit */
tm.tm_sec = bcd2bin(regs[ISL1219_REG_SCT - ISL1219_REG_SCT] & 0x7f);
tm.tm_min = bcd2bin(regs[ISL1219_REG_MNT - ISL1219_REG_SCT] & 0x7f);
tm.tm_hour = bcd2bin(regs[ISL1219_REG_HRT - ISL1219_REG_SCT] & 0x3f);
tm.tm_mday = bcd2bin(regs[ISL1219_REG_DTT - ISL1219_REG_SCT] & 0x3f);
tm.tm_mon =
bcd2bin(regs[ISL1219_REG_MOT - ISL1219_REG_SCT] & 0x1f) - 1;
tm.tm_year = bcd2bin(regs[ISL1219_REG_YRT - ISL1219_REG_SCT]) + 100;
sr = rtc_valid_tm(&tm);
if (sr)
return sr;
return sprintf(buf, "%llu\n",
(unsigned long long)rtc_tm_to_time64(&tm));
};
static DEVICE_ATTR_RW(timestamp0);
static irqreturn_t
isl1208_rtc_interrupt(int irq, void *data)
{
unsigned long timeout = jiffies + msecs_to_jiffies(1000);
struct i2c_client *client = data;
struct isl1208_state *isl1208 = i2c_get_clientdata(client);
int handled = 0, sr, err;
if (!isl1208->config->has_tamper) {
/*
* The INT# output is pulled low 250ms after the alarm is
* triggered. After the INT# output is pulled low, it is low for
* at least 250ms, even if the correct action is taken to clear
* it. It is impossible to clear ALM if it is still active. The
* host must wait for the RTC to progress past the alarm time
* plus the 250ms delay before clearing ALM.
*/
msleep(250);
}
/*
* I2C reads get NAK'ed if we read straight away after an interrupt?
* Using a mdelay/msleep didn't seem to help either, so we work around
* this by continually trying to read the register for a short time.
*/
while (1) {
sr = isl1208_i2c_get_sr(client);
if (sr >= 0)
break;
if (time_after(jiffies, timeout)) {
dev_err(&client->dev, "%s: reading SR failed\n",
__func__);
return sr;
}
}
if (sr & ISL1208_REG_SR_ALM) {
dev_dbg(&client->dev, "alarm!\n");
rtc_update_irq(isl1208->rtc, 1, RTC_IRQF | RTC_AF);
/* Disable the alarm */
err = isl1208_rtc_toggle_alarm(client, 0);
if (err)
return err;
fsleep(275);
/* Clear the alarm */
sr &= ~ISL1208_REG_SR_ALM;
sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR, sr);
if (sr < 0)
dev_err(&client->dev, "%s: writing SR failed\n",
__func__);
else
handled = 1;
}
if (isl1208->config->has_tamper && (sr & ISL1208_REG_SR_EVT)) {
dev_warn(&client->dev, "event detected");
handled = 1;
if (isl1208->config->has_timestamp)
sysfs_notify(&isl1208->rtc->dev.kobj, NULL,
dev_attr_timestamp0.attr.name);
}
return handled ? IRQ_HANDLED : IRQ_NONE;
}
static const struct rtc_class_ops isl1208_rtc_ops = {
.proc = isl1208_rtc_proc,
.read_time = isl1208_rtc_read_time,
.set_time = isl1208_rtc_set_time,
.read_alarm = isl1208_rtc_read_alarm,
.set_alarm = isl1208_rtc_set_alarm,
};
/* sysfs interface */
static ssize_t
isl1208_sysfs_show_atrim(struct device *dev,
struct device_attribute *attr, char *buf)
{
int atr = isl1208_i2c_get_atr(to_i2c_client(dev->parent));
if (atr < 0)
return atr;
return sprintf(buf, "%d.%.2d pF\n", atr >> 2, (atr & 0x3) * 25);
}
static DEVICE_ATTR(atrim, S_IRUGO, isl1208_sysfs_show_atrim, NULL);
static ssize_t
isl1208_sysfs_show_dtrim(struct device *dev,
struct device_attribute *attr, char *buf)
{
int dtr = isl1208_i2c_get_dtr(to_i2c_client(dev->parent));
if (dtr < 0)
return dtr;
return sprintf(buf, "%d ppm\n", dtr - 100);
}
static DEVICE_ATTR(dtrim, S_IRUGO, isl1208_sysfs_show_dtrim, NULL);
static ssize_t
isl1208_sysfs_show_usr(struct device *dev,
struct device_attribute *attr, char *buf)
{
int usr = isl1208_i2c_get_usr(to_i2c_client(dev->parent));
if (usr < 0)
return usr;
return sprintf(buf, "0x%.4x\n", usr);
}
static ssize_t
isl1208_sysfs_store_usr(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
int usr = -1;
if (buf[0] == '0' && (buf[1] == 'x' || buf[1] == 'X')) {
if (sscanf(buf, "%x", &usr) != 1)
return -EINVAL;
} else {
if (sscanf(buf, "%d", &usr) != 1)
return -EINVAL;
}
if (usr < 0 || usr > 0xffff)
return -EINVAL;
if (isl1208_i2c_set_usr(to_i2c_client(dev->parent), usr))
return -EIO;
return count;
}
static DEVICE_ATTR(usr, S_IRUGO | S_IWUSR, isl1208_sysfs_show_usr,
isl1208_sysfs_store_usr);
static struct attribute *isl1208_rtc_attrs[] = {
&dev_attr_atrim.attr,
&dev_attr_dtrim.attr,
&dev_attr_usr.attr,
NULL
};
static const struct attribute_group isl1208_rtc_sysfs_files = {
.attrs = isl1208_rtc_attrs,
};
static struct attribute *isl1219_rtc_attrs[] = {
&dev_attr_timestamp0.attr,
NULL
};
static const struct attribute_group isl1219_rtc_sysfs_files = {
.attrs = isl1219_rtc_attrs,
};
static int isl1208_nvmem_read(void *priv, unsigned int off, void *buf,
size_t count)
{
struct isl1208_state *isl1208 = priv;
struct i2c_client *client = to_i2c_client(isl1208->rtc->dev.parent);
/* nvmem sanitizes offset/count for us, but count==0 is possible */
if (!count)
return count;
return isl1208_i2c_read_regs(client, ISL1208_REG_USR1 + off, buf,
count);
}
static int isl1208_nvmem_write(void *priv, unsigned int off, void *buf,
size_t count)
{
struct isl1208_state *isl1208 = priv;
struct i2c_client *client = to_i2c_client(isl1208->rtc->dev.parent);
/* nvmem sanitizes off/count for us, but count==0 is possible */
if (!count)
return count;
return isl1208_i2c_set_regs(client, ISL1208_REG_USR1 + off, buf,
count);
}
static const struct nvmem_config isl1208_nvmem_config = {
.name = "isl1208_nvram",
.word_size = 1,
.stride = 1,
/* .size from chip specific config */
.reg_read = isl1208_nvmem_read,
.reg_write = isl1208_nvmem_write,
};
static int isl1208_setup_irq(struct i2c_client *client, int irq)
{
int rc = devm_request_threaded_irq(&client->dev, irq, NULL,
isl1208_rtc_interrupt,
IRQF_SHARED | IRQF_ONESHOT,
isl1208_driver.driver.name,
client);
if (!rc) {
device_init_wakeup(&client->dev, 1);
enable_irq_wake(irq);
} else {
dev_err(&client->dev,
"Unable to request irq %d, no alarm support\n",
irq);
}
return rc;
}
static int
isl1208_clk_present(struct i2c_client *client, const char *name)
{
struct clk *clk;
clk = devm_clk_get_optional(&client->dev, name);
if (IS_ERR(clk))
return PTR_ERR(clk);
return !!clk;
}
static int
isl1208_probe(struct i2c_client *client)
{
struct isl1208_state *isl1208;
int evdet_irq = -1;
int xtosb_val = 0;
int rc = 0;
int sr;
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
return -ENODEV;
if (isl1208_i2c_validate_client(client) < 0)
return -ENODEV;
/* Allocate driver state, point i2c client data to it */
isl1208 = devm_kzalloc(&client->dev, sizeof(*isl1208), GFP_KERNEL);
if (!isl1208)
return -ENOMEM;
i2c_set_clientdata(client, isl1208);
/* Determine which chip we have */
isl1208->config = i2c_get_match_data(client);
if (!isl1208->config)
return -ENODEV;
rc = isl1208_clk_present(client, "xin");
if (rc < 0)
return rc;
if (!rc) {
rc = isl1208_clk_present(client, "clkin");
if (rc < 0)
return rc;
if (rc)
xtosb_val = 1;
}
isl1208->rtc = devm_rtc_allocate_device(&client->dev);
if (IS_ERR(isl1208->rtc))
return PTR_ERR(isl1208->rtc);
isl1208->rtc->ops = &isl1208_rtc_ops;
/* Setup nvmem configuration in driver state struct */
isl1208->nvmem_config = isl1208_nvmem_config;
isl1208->nvmem_config.size = isl1208->config->nvmem_length;
isl1208->nvmem_config.priv = isl1208;
sr = isl1208_i2c_get_sr(client);
if (sr < 0) {
dev_err(&client->dev, "reading status failed\n");
return sr;
}
if (isl1208->config->has_inverted_osc_bit)
xtosb_val = !xtosb_val;
rc = isl1208_set_xtoscb(client, sr, xtosb_val);
if (rc)
return rc;
if (sr & ISL1208_REG_SR_RTCF)
dev_warn(&client->dev, "rtc power failure detected, "
"please set clock.\n");
if (isl1208->config->has_tamper) {
struct device_node *np = client->dev.of_node;
u32 evienb;
rc = i2c_smbus_read_byte_data(client, ISL1219_REG_EV);
if (rc < 0) {
dev_err(&client->dev, "failed to read EV reg\n");
return rc;
}
rc |= ISL1219_REG_EV_EVEN;
if (!of_property_read_u32(np, "isil,ev-evienb", &evienb)) {
if (evienb)
rc |= ISL1219_REG_EV_EVIENB;
else
rc &= ~ISL1219_REG_EV_EVIENB;
}
rc = i2c_smbus_write_byte_data(client, ISL1219_REG_EV, rc);
if (rc < 0) {
dev_err(&client->dev, "could not enable tamper detection\n");
return rc;
}
evdet_irq = of_irq_get_byname(np, "evdet");
}
if (isl1208->config->has_timestamp) {
rc = rtc_add_group(isl1208->rtc, &isl1219_rtc_sysfs_files);
if (rc)
return rc;
}
rc = rtc_add_group(isl1208->rtc, &isl1208_rtc_sysfs_files);
if (rc)
return rc;
if (client->irq > 0) {
rc = isl1208_setup_irq(client, client->irq);
if (rc)
return rc;
} else {
clear_bit(RTC_FEATURE_UPDATE_INTERRUPT, isl1208->rtc->features);
}
if (evdet_irq > 0 && evdet_irq != client->irq)
rc = isl1208_setup_irq(client, evdet_irq);
if (rc)
return rc;
rc = devm_rtc_nvmem_register(isl1208->rtc, &isl1208->nvmem_config);
if (rc)
return rc;
return devm_rtc_register_device(isl1208->rtc);
}
static struct i2c_driver isl1208_driver = {
.driver = {
.name = "rtc-isl1208",
.of_match_table = of_match_ptr(isl1208_of_match),
},
.probe = isl1208_probe,
.id_table = isl1208_id,
};
module_i2c_driver(isl1208_driver);
MODULE_AUTHOR("Herbert Valerio Riedel <hvr@gnu.org>");
MODULE_DESCRIPTION("Intersil ISL1208 RTC driver");
MODULE_LICENSE("GPL");