kevin/linux
1
Fork 0
Code
d0760b3bc8
linux/arch/arm
History
Andrew Victor d0760b3bc8 [ARM] 4143/1: AT91: Prepare for AT91SAM9263 support 
The Atmel AT91SAM9263 processor includes many more integrated
peripherals than Atmel's previous ARM9-based AT91 processors, so this
has necessitated a few changes to the core AT91 support.

These changes are:
      * The system peripheral I/O region we remap has increased from
        0xFFFA0000..0xFFFFFFFF to 0xFFF78000..0xFFFFFFFF.
      * The increased I/O region forces changes to entry-macro.S and
        debug-macro.S due to ARM's limited immediate offset addressing
        modes.
      * Maximum number of GPIO banks increases to 5.
      * 2 MMC controllers so the board-setup code needs to specify which
        controller it wishes to use when calling at91_add_device_mmc().

Original patch from Nicolas Ferre.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-08 14:55:22 +00:00
..
boot fix file specification in comments 2006-10-03 23:01:26 +02:00
common Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm 2006-12-07 15:40:39 -08:00
configs [ARM] 4084/1: Remove CONFIG_DEBUG_WAITQ 2007-01-24 11:59:53 +00:00
kernel [ARM] Move processor_modes[] to .../process.c 2007-02-06 16:46:48 +00:00
lib
mach-aaec2000 [ARM] Remove compatibility layer for ARM irqs 2006-11-30 12:24:47 +00:00
mach-at91 [ARM] 4143/1: AT91: Prepare for AT91SAM9263 support 2007-02-08 14:55:22 +00:00
mach-clps711x [ARM] Remove compatibility layer for ARM irqs 2006-11-30 12:24:47 +00:00
mach-clps7500 [ARM] Remove compatibility layer for ARM irqs 2006-11-30 12:24:47 +00:00
mach-ebsa110 [ARM] Remove compatibility layer for ARM irqs 2006-11-30 12:24:47 +00:00
mach-ep93xx [ARM] 4047/1: Add initial board support for Contec Hypercontrol Micro9 boards. 2007-02-06 16:46:47 +00:00
mach-footbridge [ARM] Remove compatibility layer for ARM irqs 2006-11-30 12:24:47 +00:00
mach-h720x [ARM] Remove compatibility layer for ARM irqs 2006-11-30 12:24:47 +00:00
mach-imx [ARM] 4092/1: i.MX/MX1 CPU Frequency scaling latency definition 2007-01-24 11:59:56 +00:00
mach-integrator [ARM] Remove compatibility layer for ARM irqs 2006-11-30 12:24:47 +00:00
mach-iop13xx [ARM] 4077/1: iop13xx: fix __io() macro 2006-12-30 17:05:08 +00:00
mach-iop32x [ARM] Remove compatibility layer for ARM irqs 2006-11-30 12:24:47 +00:00
mach-iop33x [ARM] Remove compatibility layer for ARM irqs 2006-11-30 12:24:47 +00:00
mach-ixp4xx [ARM] 4032/1: Add platform resources required for CF driver 2007-02-06 16:46:46 +00:00
mach-ixp23xx [ARM] 3994/1: ixp23xx: fix handling of pci master aborts 2006-12-07 16:16:19 +00:00
mach-ixp2000 [ARM] 3965/1: ixp2000: fix handling of pci master aborts 2006-12-01 16:55:22 +00:00
mach-l7200 [ARM] Remove compatibility layer for ARM irqs 2006-11-30 12:24:47 +00:00
mach-lh7a40x Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm 2006-12-07 15:40:39 -08:00
mach-netx [ARM] 4013/1: clocksource driver for netx 2006-12-13 14:37:27 +00:00
mach-omap1 [PATCH] another build fix, header rearrangements (OSK) 2006-12-13 09:05:46 -08:00
mach-omap2 [PATCH] ARM: OMAP: fix missing header on apollon board 2006-12-30 10:56:42 -08:00
mach-pnx4008 i2c: New Philips PNX bus driver 2006-12-10 21:21:29 +01:00
mach-pxa [ARM] 4066/1: correct a comment about PXA's sched_clock range 2006-12-30 17:05:07 +00:00
mach-realview i2c: New ARM Versatile/Realview bus driver 2006-12-10 21:21:32 +01:00
mach-rpc [ARM] Remove compatibility layer for ARM irqs 2006-11-30 12:24:47 +00:00
mach-s3c2410 [ARM] 4117/1: S3C2412: Fix writel() usage in selection code 2007-01-29 10:09:17 +00:00
mach-sa1100 [ARM] 4017/1: [Jornada7xx] - Updating Jornada720.c 2006-12-13 22:43:37 +00:00
mach-shark [ARM] Remove compatibility layer for ARM irqs 2006-11-30 12:24:47 +00:00
mach-versatile i2c: New ARM Versatile/Realview bus driver 2006-12-10 21:21:32 +01:00
mm [ARM] 4112/1: Only ioremap to supersections if DOMAIN_IO is zero 2007-01-25 16:35:26 +00:00
nwfpe
oprofile [ARM] oprofile: add ARM11 SMP support 2007-02-06 16:46:45 +00:00
plat-iop Initial blind fixup for arm for irq changes 2006-10-06 10:59:54 -07:00
plat-omap kconfig: Standardize "depends" -> "depends on" in Kconfig files 2006-12-12 20:04:19 +01:00
tools [ARM] Update mach-types 2007-01-24 11:59:57 +00:00
vfp [ARM] 4111/1: Allow VFP to work with thread migration on SMP 2007-01-25 16:35:29 +00:00
Kconfig [ARM] 4124/1: Rename mach-at91rm9200 and arch-at91rm9200 directories 2007-02-08 14:50:56 +00:00
Kconfig-nommu
Kconfig.debug [ARM] Remove DEBUG_WAITQ 2006-11-30 12:24:47 +00:00
Makefile [ARM] 4124/1: Rename mach-at91rm9200 and arch-at91rm9200 directories 2007-02-08 14:50:56 +00:00