1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
124 lines
5.7 KiB
Plaintext
124 lines
5.7 KiB
Plaintext
An OSS/Lite Driver for the ESS Maestro family of sound cards
|
|
|
|
Zach Brown, December 1999
|
|
|
|
Driver Status and Availability
|
|
------------------------------
|
|
|
|
The most recent version of this driver will hopefully always be available at
|
|
http://www.zabbo.net/maestro/
|
|
|
|
I will try and maintain the most recent stable version of the driver
|
|
in both the stable and development kernel lines.
|
|
|
|
ESS Maestro Chip Family
|
|
-----------------------
|
|
|
|
There are 3 main variants of the ESS Maestro PCI sound chip. The first
|
|
is the Maestro 1. It was originally produced by Platform Tech as the
|
|
'AGOGO'. It can be recognized by Platform Tech's PCI ID 0x1285 with
|
|
0x0100 as the device ID. It was put on some sound boards and a few laptops.
|
|
ESS bought the design and cleaned it up as the Maestro 2. This starts
|
|
their marking with the ESS vendor ID 0x125D and the 'year' device IDs.
|
|
The Maestro 2 claims 0x1968 while the Maestro 2e has 0x1978.
|
|
|
|
The various families of Maestro are mostly identical as far as this
|
|
driver is concerned. It doesn't touch the DSP parts that differ (though
|
|
it could for FM synthesis).
|
|
|
|
Driver OSS Behavior
|
|
--------------------
|
|
|
|
This OSS driver exports /dev/mixer and /dev/dsp to applications, which
|
|
mostly adhere to the OSS spec. This driver doesn't register itself
|
|
with /dev/sndstat, so don't expect information to appear there.
|
|
|
|
The /dev/dsp device exported behaves almost as expected. Playback is
|
|
supported in all the various lovely formats. 8/16bit stereo/mono from
|
|
8khz to 48khz, and mmap()ing for playback behaves. Capture/recording
|
|
is limited due to oddities with the Maestro hardware. One can only
|
|
record in 16bit stereo. For recording the maestro uses non interleaved
|
|
stereo buffers so that mmap()ing the incoming data does not result in
|
|
a ring buffer of LRLR data. mmap()ing of the read buffers is therefore
|
|
disallowed until this can be cleaned up.
|
|
|
|
/dev/mixer is an interface to the AC'97 codec on the Maestro. It is
|
|
worth noting that there are a variety of AC'97s that can be wired to
|
|
the Maestro. Which is used is entirely up to the hardware implementor.
|
|
This should only be visible to the user by the presence, or lack, of
|
|
'Bass' and 'Treble' sliders in the mixer. Not all AC'97s have them.
|
|
|
|
The driver doesn't support MIDI or FM playback at the moment. Typically
|
|
the Maestro is wired to an MPU MIDI chip, but some hardware implementations
|
|
don't. We need to assemble a white list of hardware implementations that
|
|
have MIDI wired properly before we can claim to support it safely.
|
|
|
|
Compiling and Installing
|
|
------------------------
|
|
|
|
With the drivers inclusion into the kernel, compiling and installing
|
|
is the same as most OSS/Lite modular sound drivers. Compilation
|
|
of the driver is enabled through the CONFIG_SOUND_MAESTRO variable
|
|
in the config system.
|
|
|
|
It may be modular or statically linked. If it is modular it should be
|
|
installed with the rest of the modules for the kernel on the system.
|
|
Typically this will be in /lib/modules/ somewhere. 'alias sound maestro'
|
|
should also be added to your module configs (typically /etc/conf.modules)
|
|
if you're using modular OSS/Lite sound and want to default to using a
|
|
maestro chip.
|
|
|
|
As this is a PCI device, the module does not need to be informed of
|
|
any IO or IRQ resources it should use, it devines these from the
|
|
system. Sometimes, on sucky PCs, the BIOS fails to allocated resources
|
|
for the maestro. This will result in a message like:
|
|
maestro: PCI subsystem reports IRQ 0, this might not be correct.
|
|
from the kernel. Should this happen the sound chip most likely will
|
|
not operate correctly. To solve this one has to dig through their BIOS
|
|
(typically entered by hitting a hot key at boot time) and figure out
|
|
what magic needs to happen so that the BIOS will reward the maestro with
|
|
an IRQ. This operation is incredibly system specific, so you're on your
|
|
own. Sometimes the magic lies in 'PNP Capable Operating System' settings.
|
|
|
|
There are very few options to the driver. One is 'debug' which will
|
|
tell the driver to print minimal debugging information as it runs. This
|
|
can be collected with 'dmesg' or through the klogd daemon.
|
|
|
|
The other, more interesting option, is 'dsps_order'. Typically at
|
|
install time the driver will only register one available /dev/dsp device
|
|
for its use. The 'dsps_order' module parameter allows for more devices
|
|
to be allocated, as a power of two. Up to 4 devices can be registered
|
|
( dsps_order=2 ). These devices act as fully distinct units and use
|
|
separate channels in the maestro.
|
|
|
|
Power Management
|
|
----------------
|
|
|
|
As of version 0.14, this driver has a minimal understanding of PCI
|
|
Power Management. If it finds a valid power management capability
|
|
on the PCI device it will attempt to use the power management
|
|
functions of the maestro. It will only do this on Maestro 2Es and
|
|
only on machines that are known to function well. You can
|
|
force the use of power management by setting the 'use_pm' module
|
|
option to 1, or can disable it entirely by setting it to 0.
|
|
|
|
When using power management, the driver does a few things
|
|
differently. It will keep the chip in a lower power mode
|
|
when the module is inserted but /dev/dsp is not open. This
|
|
allows the mixer to function but turns off the clocks
|
|
on other parts of the chip. When /dev/dsp is opened the chip
|
|
is brought into full power mode, and brought back down
|
|
when it is closed. It also powers down the chip entirely
|
|
when the module is removed or the machine is shutdown. This
|
|
can have nonobvious consequences. CD audio may not work
|
|
after a power managing driver is removed. Also, software that
|
|
doesn't understand power management may not be able to talk
|
|
to the powered down chip until the machine goes through a hard
|
|
reboot to bring it back.
|
|
|
|
.. more details ..
|
|
------------------
|
|
|
|
drivers/sound/maestro.c contains comments that hopefully explain
|
|
the maestro implementation.
|