1
linux/drivers/scsi/isci/host.h
Dan Williams 9b4be52899 [SCSI] isci: dynamic interrupt coalescing
Hardware allows both an outstanding number commands and a timeout value
(whichever occurs first) as a gate to the next interrupt generation.  This
scheme at completion time looks at the remaining number of outstanding tasks
and sets the timeout to maximize small transaction operation.  If transactions
are large (take more than a few 10s of microseconds to complete) then
performance is not interrupt processing bound, so the small timeouts this
scheme generates are overridden by the time it takes for a completion to
arrive.

Tested-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-23 20:04:42 -07:00

546 lines
17 KiB
C

/*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.GPL.
*
* BSD LICENSE
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _SCI_HOST_H_
#define _SCI_HOST_H_
#include "remote_device.h"
#include "phy.h"
#include "isci.h"
#include "remote_node_table.h"
#include "registers.h"
#include "unsolicited_frame_control.h"
#include "probe_roms.h"
struct isci_request;
struct scu_task_context;
/**
* struct sci_power_control -
*
* This structure defines the fields for managing power control for direct
* attached disk devices.
*/
struct sci_power_control {
/**
* This field is set when the power control timer is running and cleared when
* it is not.
*/
bool timer_started;
/**
* Timer to control when the directed attached disks can consume power.
*/
struct sci_timer timer;
/**
* This field is used to keep track of how many phys are put into the
* requesters field.
*/
u8 phys_waiting;
/**
* This field is used to keep track of how many phys have been granted to consume power
*/
u8 phys_granted_power;
/**
* This field is an array of phys that we are waiting on. The phys are direct
* mapped into requesters via struct sci_phy.phy_index
*/
struct isci_phy *requesters[SCI_MAX_PHYS];
};
struct sci_port_configuration_agent;
typedef void (*port_config_fn)(struct isci_host *,
struct sci_port_configuration_agent *,
struct isci_port *, struct isci_phy *);
struct sci_port_configuration_agent {
u16 phy_configured_mask;
u16 phy_ready_mask;
struct {
u8 min_index;
u8 max_index;
} phy_valid_port_range[SCI_MAX_PHYS];
bool timer_pending;
port_config_fn link_up_handler;
port_config_fn link_down_handler;
struct sci_timer timer;
};
/**
* isci_host - primary host/controller object
* @timer: timeout start/stop operations
* @device_table: rni (hw remote node index) to remote device lookup table
* @available_remote_nodes: rni allocator
* @power_control: manage device spin up
* @io_request_sequence: generation number for tci's (task contexts)
* @task_context_table: hw task context table
* @remote_node_context_table: hw remote node context table
* @completion_queue: hw-producer driver-consumer communication ring
* @completion_queue_get: tracks the driver 'head' of the ring to notify hw
* @logical_port_entries: min({driver|silicon}-supported-port-count)
* @remote_node_entries: min({driver|silicon}-supported-node-count)
* @task_context_entries: min({driver|silicon}-supported-task-count)
* @phy_timer: phy startup timer
* @invalid_phy_mask: if an invalid_link_up notification is reported a bit for
* the phy index is set so further notifications are not
* made. Once the phy reports link up and is made part of a
* port then this bit is cleared.
*/
struct isci_host {
struct sci_base_state_machine sm;
/* XXX can we time this externally */
struct sci_timer timer;
/* XXX drop reference module params directly */
struct sci_user_parameters user_parameters;
/* XXX no need to be a union */
struct sci_oem_params oem_parameters;
struct sci_port_configuration_agent port_agent;
struct isci_remote_device *device_table[SCI_MAX_REMOTE_DEVICES];
struct sci_remote_node_table available_remote_nodes;
struct sci_power_control power_control;
u8 io_request_sequence[SCI_MAX_IO_REQUESTS];
struct scu_task_context *task_context_table;
dma_addr_t task_context_dma;
union scu_remote_node_context *remote_node_context_table;
u32 *completion_queue;
u32 completion_queue_get;
u32 logical_port_entries;
u32 remote_node_entries;
u32 task_context_entries;
struct sci_unsolicited_frame_control uf_control;
/* phy startup */
struct sci_timer phy_timer;
/* XXX kill */
bool phy_startup_timer_pending;
u32 next_phy_to_start;
/* XXX convert to unsigned long and use bitops */
u8 invalid_phy_mask;
/* TODO attempt dynamic interrupt coalescing scheme */
u16 interrupt_coalesce_number;
u32 interrupt_coalesce_timeout;
struct smu_registers __iomem *smu_registers;
struct scu_registers __iomem *scu_registers;
u16 tci_head;
u16 tci_tail;
u16 tci_pool[SCI_MAX_IO_REQUESTS];
int id; /* unique within a given pci device */
struct isci_phy phys[SCI_MAX_PHYS];
struct isci_port ports[SCI_MAX_PORTS + 1]; /* includes dummy port */
struct sas_ha_struct sas_ha;
spinlock_t state_lock;
struct pci_dev *pdev;
enum isci_status status;
#define IHOST_START_PENDING 0
#define IHOST_STOP_PENDING 1
unsigned long flags;
wait_queue_head_t eventq;
struct Scsi_Host *shost;
struct tasklet_struct completion_tasklet;
struct list_head requests_to_complete;
struct list_head requests_to_errorback;
spinlock_t scic_lock;
struct isci_request *reqs[SCI_MAX_IO_REQUESTS];
struct isci_remote_device devices[SCI_MAX_REMOTE_DEVICES];
};
/**
* enum sci_controller_states - This enumeration depicts all the states
* for the common controller state machine.
*/
enum sci_controller_states {
/**
* Simply the initial state for the base controller state machine.
*/
SCIC_INITIAL = 0,
/**
* This state indicates that the controller is reset. The memory for
* the controller is in it's initial state, but the controller requires
* initialization.
* This state is entered from the INITIAL state.
* This state is entered from the RESETTING state.
*/
SCIC_RESET,
/**
* This state is typically an action state that indicates the controller
* is in the process of initialization. In this state no new IO operations
* are permitted.
* This state is entered from the RESET state.
*/
SCIC_INITIALIZING,
/**
* This state indicates that the controller has been successfully
* initialized. In this state no new IO operations are permitted.
* This state is entered from the INITIALIZING state.
*/
SCIC_INITIALIZED,
/**
* This state indicates the the controller is in the process of becoming
* ready (i.e. starting). In this state no new IO operations are permitted.
* This state is entered from the INITIALIZED state.
*/
SCIC_STARTING,
/**
* This state indicates the controller is now ready. Thus, the user
* is able to perform IO operations on the controller.
* This state is entered from the STARTING state.
*/
SCIC_READY,
/**
* This state is typically an action state that indicates the controller
* is in the process of resetting. Thus, the user is unable to perform
* IO operations on the controller. A reset is considered destructive in
* most cases.
* This state is entered from the READY state.
* This state is entered from the FAILED state.
* This state is entered from the STOPPED state.
*/
SCIC_RESETTING,
/**
* This state indicates that the controller is in the process of stopping.
* In this state no new IO operations are permitted, but existing IO
* operations are allowed to complete.
* This state is entered from the READY state.
*/
SCIC_STOPPING,
/**
* This state indicates that the controller has successfully been stopped.
* In this state no new IO operations are permitted.
* This state is entered from the STOPPING state.
*/
SCIC_STOPPED,
/**
* This state indicates that the controller could not successfully be
* initialized. In this state no new IO operations are permitted.
* This state is entered from the INITIALIZING state.
* This state is entered from the STARTING state.
* This state is entered from the STOPPING state.
* This state is entered from the RESETTING state.
*/
SCIC_FAILED,
};
/**
* struct isci_pci_info - This class represents the pci function containing the
* controllers. Depending on PCI SKU, there could be up to 2 controllers in
* the PCI function.
*/
#define SCI_MAX_MSIX_INT (SCI_NUM_MSI_X_INT*SCI_MAX_CONTROLLERS)
struct isci_pci_info {
struct msix_entry msix_entries[SCI_MAX_MSIX_INT];
struct isci_host *hosts[SCI_MAX_CONTROLLERS];
struct isci_orom *orom;
};
static inline struct isci_pci_info *to_pci_info(struct pci_dev *pdev)
{
return pci_get_drvdata(pdev);
}
#define for_each_isci_host(id, ihost, pdev) \
for (id = 0, ihost = to_pci_info(pdev)->hosts[id]; \
id < ARRAY_SIZE(to_pci_info(pdev)->hosts) && ihost; \
ihost = to_pci_info(pdev)->hosts[++id])
static inline enum isci_status isci_host_get_state(struct isci_host *isci_host)
{
return isci_host->status;
}
static inline void isci_host_change_state(struct isci_host *isci_host,
enum isci_status status)
{
unsigned long flags;
dev_dbg(&isci_host->pdev->dev,
"%s: isci_host = %p, state = 0x%x",
__func__,
isci_host,
status);
spin_lock_irqsave(&isci_host->state_lock, flags);
isci_host->status = status;
spin_unlock_irqrestore(&isci_host->state_lock, flags);
}
static inline void wait_for_start(struct isci_host *ihost)
{
wait_event(ihost->eventq, !test_bit(IHOST_START_PENDING, &ihost->flags));
}
static inline void wait_for_stop(struct isci_host *ihost)
{
wait_event(ihost->eventq, !test_bit(IHOST_STOP_PENDING, &ihost->flags));
}
static inline void wait_for_device_start(struct isci_host *ihost, struct isci_remote_device *idev)
{
wait_event(ihost->eventq, !test_bit(IDEV_START_PENDING, &idev->flags));
}
static inline void wait_for_device_stop(struct isci_host *ihost, struct isci_remote_device *idev)
{
wait_event(ihost->eventq, !test_bit(IDEV_STOP_PENDING, &idev->flags));
}
static inline struct isci_host *dev_to_ihost(struct domain_device *dev)
{
return dev->port->ha->lldd_ha;
}
/* we always use protocol engine group zero */
#define ISCI_PEG 0
/* see sci_controller_io_tag_allocate|free for how seq and tci are built */
#define ISCI_TAG(seq, tci) (((u16) (seq)) << 12 | tci)
/* these are returned by the hardware, so sanitize them */
#define ISCI_TAG_SEQ(tag) (((tag) >> 12) & (SCI_MAX_SEQ-1))
#define ISCI_TAG_TCI(tag) ((tag) & (SCI_MAX_IO_REQUESTS-1))
/* interrupt coalescing baseline: 9 == 3 to 5us interrupt delay per command */
#define ISCI_COALESCE_BASE 9
/* expander attached sata devices require 3 rnc slots */
static inline int sci_remote_device_node_count(struct isci_remote_device *idev)
{
struct domain_device *dev = idev->domain_dev;
if ((dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) &&
!idev->is_direct_attached)
return SCU_STP_REMOTE_NODE_COUNT;
return SCU_SSP_REMOTE_NODE_COUNT;
}
/**
* sci_controller_clear_invalid_phy() -
*
* This macro will clear the bit in the invalid phy mask for this controller
* object. This is used to control messages reported for invalid link up
* notifications.
*/
#define sci_controller_clear_invalid_phy(controller, phy) \
((controller)->invalid_phy_mask &= ~(1 << (phy)->phy_index))
static inline struct device *sciphy_to_dev(struct isci_phy *iphy)
{
if (!iphy || !iphy->isci_port || !iphy->isci_port->isci_host)
return NULL;
return &iphy->isci_port->isci_host->pdev->dev;
}
static inline struct device *sciport_to_dev(struct isci_port *iport)
{
if (!iport || !iport->isci_host)
return NULL;
return &iport->isci_host->pdev->dev;
}
static inline struct device *scirdev_to_dev(struct isci_remote_device *idev)
{
if (!idev || !idev->isci_port || !idev->isci_port->isci_host)
return NULL;
return &idev->isci_port->isci_host->pdev->dev;
}
static inline bool is_a2(struct pci_dev *pdev)
{
if (pdev->revision < 4)
return true;
return false;
}
static inline bool is_b0(struct pci_dev *pdev)
{
if (pdev->revision == 4)
return true;
return false;
}
static inline bool is_c0(struct pci_dev *pdev)
{
if (pdev->revision >= 5)
return true;
return false;
}
void sci_controller_post_request(struct isci_host *ihost,
u32 request);
void sci_controller_release_frame(struct isci_host *ihost,
u32 frame_index);
void sci_controller_copy_sata_response(void *response_buffer,
void *frame_header,
void *frame_buffer);
enum sci_status sci_controller_allocate_remote_node_context(struct isci_host *ihost,
struct isci_remote_device *idev,
u16 *node_id);
void sci_controller_free_remote_node_context(
struct isci_host *ihost,
struct isci_remote_device *idev,
u16 node_id);
struct isci_request *sci_request_by_tag(struct isci_host *ihost,
u16 io_tag);
void sci_controller_power_control_queue_insert(
struct isci_host *ihost,
struct isci_phy *iphy);
void sci_controller_power_control_queue_remove(
struct isci_host *ihost,
struct isci_phy *iphy);
void sci_controller_link_up(
struct isci_host *ihost,
struct isci_port *iport,
struct isci_phy *iphy);
void sci_controller_link_down(
struct isci_host *ihost,
struct isci_port *iport,
struct isci_phy *iphy);
void sci_controller_remote_device_stopped(
struct isci_host *ihost,
struct isci_remote_device *idev);
void sci_controller_copy_task_context(
struct isci_host *ihost,
struct isci_request *ireq);
void sci_controller_register_setup(struct isci_host *ihost);
enum sci_status sci_controller_continue_io(struct isci_request *ireq);
int isci_host_scan_finished(struct Scsi_Host *, unsigned long);
void isci_host_scan_start(struct Scsi_Host *);
u16 isci_alloc_tag(struct isci_host *ihost);
enum sci_status isci_free_tag(struct isci_host *ihost, u16 io_tag);
void isci_tci_free(struct isci_host *ihost, u16 tci);
int isci_host_init(struct isci_host *);
void isci_host_init_controller_names(
struct isci_host *isci_host,
unsigned int controller_idx);
void isci_host_deinit(
struct isci_host *);
void isci_host_port_link_up(
struct isci_host *,
struct isci_port *,
struct isci_phy *);
int isci_host_dev_found(struct domain_device *);
void isci_host_remote_device_start_complete(
struct isci_host *,
struct isci_remote_device *,
enum sci_status);
void sci_controller_disable_interrupts(
struct isci_host *ihost);
enum sci_status sci_controller_start_io(
struct isci_host *ihost,
struct isci_remote_device *idev,
struct isci_request *ireq);
enum sci_task_status sci_controller_start_task(
struct isci_host *ihost,
struct isci_remote_device *idev,
struct isci_request *ireq);
enum sci_status sci_controller_terminate_request(
struct isci_host *ihost,
struct isci_remote_device *idev,
struct isci_request *ireq);
enum sci_status sci_controller_complete_io(
struct isci_host *ihost,
struct isci_remote_device *idev,
struct isci_request *ireq);
void sci_port_configuration_agent_construct(
struct sci_port_configuration_agent *port_agent);
enum sci_status sci_port_configuration_agent_initialize(
struct isci_host *ihost,
struct sci_port_configuration_agent *port_agent);
#endif