1
linux/include/asm-frv/system.h
Hirokazu Takata bad7af550e [PATCH] Remove unused prepare_to_switch macro
Remove unused prepare_to_switch() macros.

Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Cc: Mikael Starvik <starvik@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 06:18:34 -07:00

203 lines
5.3 KiB
C

/* system.h: FR-V CPU control definitions
*
* Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#ifndef _ASM_SYSTEM_H
#define _ASM_SYSTEM_H
#include <linux/config.h> /* get configuration macros */
#include <linux/linkage.h>
#include <asm/atomic.h>
struct thread_struct;
/*
* switch_to(prev, next) should switch from task `prev' to `next'
* `prev' will never be the same as `next'.
* The `mb' is to tell GCC not to cache `current' across this call.
*/
extern asmlinkage
struct task_struct *__switch_to(struct thread_struct *prev_thread,
struct thread_struct *next_thread,
struct task_struct *prev);
#define switch_to(prev, next, last) \
do { \
(prev)->thread.sched_lr = \
(unsigned long) __builtin_return_address(0); \
(last) = __switch_to(&(prev)->thread, &(next)->thread, (prev)); \
mb(); \
} while(0)
/*
* interrupt flag manipulation
* - use virtual interrupt management since touching the PSR is slow
* - ICC2.Z: T if interrupts virtually disabled
* - ICC2.C: F if interrupts really disabled
* - if Z==1 upon interrupt:
* - C is set to 0
* - interrupts are really disabled
* - entry.S returns immediately
* - uses TIHI (TRAP if Z==0 && C==0) #2 to really reenable interrupts
* - if taken, the trap:
* - sets ICC2.C
* - enables interrupts
*/
#define local_irq_disable() \
do { \
/* set Z flag, but don't change the C flag */ \
asm volatile(" andcc gr0,gr0,gr0,icc2 \n" \
: \
: \
: "memory", "icc2" \
); \
} while(0)
#define local_irq_enable() \
do { \
/* clear Z flag and then test the C flag */ \
asm volatile(" oricc gr0,#1,gr0,icc2 \n" \
" tihi icc2,gr0,#2 \n" \
: \
: \
: "memory", "icc2" \
); \
} while(0)
#define local_save_flags(flags) \
do { \
typecheck(unsigned long, flags); \
asm volatile("movsg ccr,%0" \
: "=r"(flags) \
: \
: "memory"); \
\
/* shift ICC2.Z to bit 0 */ \
flags >>= 26; \
\
/* make flags 1 if interrupts disabled, 0 otherwise */ \
flags &= 1UL; \
} while(0)
#define irqs_disabled() \
({unsigned long flags; local_save_flags(flags); flags; })
#define local_irq_save(flags) \
do { \
typecheck(unsigned long, flags); \
local_save_flags(flags); \
local_irq_disable(); \
} while(0)
#define local_irq_restore(flags) \
do { \
typecheck(unsigned long, flags); \
\
/* load the Z flag by turning 1 if disabled into 0 if disabled \
* and thus setting the Z flag but not the C flag */ \
asm volatile(" xoricc %0,#1,gr0,icc2 \n" \
/* then test Z=0 and C=0 */ \
" tihi icc2,gr0,#2 \n" \
: \
: "r"(flags) \
: "memory", "icc2" \
); \
\
} while(0)
/*
* real interrupt flag manipulation
*/
#define __local_irq_disable() \
do { \
unsigned long psr; \
asm volatile(" movsg psr,%0 \n" \
" andi %0,%2,%0 \n" \
" ori %0,%1,%0 \n" \
" movgs %0,psr \n" \
: "=r"(psr) \
: "i" (PSR_PIL_14), "i" (~PSR_PIL) \
: "memory"); \
} while(0)
#define __local_irq_enable() \
do { \
unsigned long psr; \
asm volatile(" movsg psr,%0 \n" \
" andi %0,%1,%0 \n" \
" movgs %0,psr \n" \
: "=r"(psr) \
: "i" (~PSR_PIL) \
: "memory"); \
} while(0)
#define __local_save_flags(flags) \
do { \
typecheck(unsigned long, flags); \
asm("movsg psr,%0" \
: "=r"(flags) \
: \
: "memory"); \
} while(0)
#define __local_irq_save(flags) \
do { \
unsigned long npsr; \
typecheck(unsigned long, flags); \
asm volatile(" movsg psr,%0 \n" \
" andi %0,%3,%1 \n" \
" ori %1,%2,%1 \n" \
" movgs %1,psr \n" \
: "=r"(flags), "=r"(npsr) \
: "i" (PSR_PIL_14), "i" (~PSR_PIL) \
: "memory"); \
} while(0)
#define __local_irq_restore(flags) \
do { \
typecheck(unsigned long, flags); \
asm volatile(" movgs %0,psr \n" \
: \
: "r" (flags) \
: "memory"); \
} while(0)
#define __irqs_disabled() \
((__get_PSR() & PSR_PIL) >= PSR_PIL_14)
/*
* Force strict CPU ordering.
*/
#define nop() asm volatile ("nop"::)
#define mb() asm volatile ("membar" : : :"memory")
#define rmb() asm volatile ("membar" : : :"memory")
#define wmb() asm volatile ("membar" : : :"memory")
#define set_mb(var, value) do { var = value; mb(); } while (0)
#define set_wmb(var, value) do { var = value; wmb(); } while (0)
#define smp_mb() mb()
#define smp_rmb() rmb()
#define smp_wmb() wmb()
#define read_barrier_depends() do {} while(0)
#define smp_read_barrier_depends() read_barrier_depends()
#define HARD_RESET_NOW() \
do { \
cli(); \
} while(1)
extern void die_if_kernel(const char *, ...) __attribute__((format(printf, 1, 2)));
extern void free_initmem(void);
#define arch_align_stack(x) (x)
#endif /* _ASM_SYSTEM_H */