664a41b8a9
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (430 commits) [media] ir-mce_kbd-decoder: include module.h for its facilities [media] ov5642: include module.h for its facilities [media] em28xx: Fix DVB-C maxsize for em2884 [media] tda18271c2dd: Fix saw filter configuration for DVB-C @6MHz [media] v4l: mt9v032: Fix Bayer pattern [media] V4L: mt9m111: rewrite set_pixfmt [media] V4L: mt9m111: fix missing return value check mt9m111_reg_clear [media] V4L: initial driver for ov5642 CMOS sensor [media] V4L: sh_mobile_ceu_camera: fix Oops when USERPTR mapping fails [media] V4L: soc-camera: remove soc-camera bus and devices on it [media] V4L: soc-camera: un-export the soc-camera bus [media] V4L: sh_mobile_csi2: switch away from using the soc-camera bus notifier [media] V4L: add media bus configuration subdev operations [media] V4L: soc-camera: group struct field initialisations together [media] V4L: soc-camera: remove now unused soc-camera specific PM hooks [media] V4L: pxa-camera: switch to using standard PM hooks [media] NetUP Dual DVB-T/C CI RF: force card hardware revision by module param [media] Don't OOPS if videobuf_dvb_get_frontend return NULL [media] NetUP Dual DVB-T/C CI RF: load firmware according card revision [media] omap3isp: Support configurable HS/VS polarities ... Fix up conflicts: - arch/arm/mach-omap2/board-rx51-peripherals.c: cleanup regulator supply definitions in mach-omap2 vs OMAP3: RX-51: define vdds_csib regulator supply - drivers/staging/tm6000/tm6000-alsa.c (trivial)
235 lines
6.1 KiB
C
235 lines
6.1 KiB
C
/*
|
|
* videobuf2-memops.c - generic memory handling routines for videobuf2
|
|
*
|
|
* Copyright (C) 2010 Samsung Electronics
|
|
*
|
|
* Author: Pawel Osciak <pawel@osciak.com>
|
|
* Marek Szyprowski <m.szyprowski@samsung.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/slab.h>
|
|
#include <linux/module.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/vmalloc.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/file.h>
|
|
|
|
#include <media/videobuf2-core.h>
|
|
#include <media/videobuf2-memops.h>
|
|
|
|
/**
|
|
* vb2_get_vma() - acquire and lock the virtual memory area
|
|
* @vma: given virtual memory area
|
|
*
|
|
* This function attempts to acquire an area mapped in the userspace for
|
|
* the duration of a hardware operation. The area is "locked" by performing
|
|
* the same set of operation that are done when process calls fork() and
|
|
* memory areas are duplicated.
|
|
*
|
|
* Returns a copy of a virtual memory region on success or NULL.
|
|
*/
|
|
struct vm_area_struct *vb2_get_vma(struct vm_area_struct *vma)
|
|
{
|
|
struct vm_area_struct *vma_copy;
|
|
|
|
vma_copy = kmalloc(sizeof(*vma_copy), GFP_KERNEL);
|
|
if (vma_copy == NULL)
|
|
return NULL;
|
|
|
|
if (vma->vm_ops && vma->vm_ops->open)
|
|
vma->vm_ops->open(vma);
|
|
|
|
if (vma->vm_file)
|
|
get_file(vma->vm_file);
|
|
|
|
memcpy(vma_copy, vma, sizeof(*vma));
|
|
|
|
vma_copy->vm_mm = NULL;
|
|
vma_copy->vm_next = NULL;
|
|
vma_copy->vm_prev = NULL;
|
|
|
|
return vma_copy;
|
|
}
|
|
|
|
/**
|
|
* vb2_put_userptr() - release a userspace virtual memory area
|
|
* @vma: virtual memory region associated with the area to be released
|
|
*
|
|
* This function releases the previously acquired memory area after a hardware
|
|
* operation.
|
|
*/
|
|
void vb2_put_vma(struct vm_area_struct *vma)
|
|
{
|
|
if (!vma)
|
|
return;
|
|
|
|
if (vma->vm_file)
|
|
fput(vma->vm_file);
|
|
|
|
if (vma->vm_ops && vma->vm_ops->close)
|
|
vma->vm_ops->close(vma);
|
|
|
|
kfree(vma);
|
|
}
|
|
EXPORT_SYMBOL_GPL(vb2_put_vma);
|
|
|
|
/**
|
|
* vb2_get_contig_userptr() - lock physically contiguous userspace mapped memory
|
|
* @vaddr: starting virtual address of the area to be verified
|
|
* @size: size of the area
|
|
* @res_paddr: will return physical address for the given vaddr
|
|
* @res_vma: will return locked copy of struct vm_area for the given area
|
|
*
|
|
* This function will go through memory area of size @size mapped at @vaddr and
|
|
* verify that the underlying physical pages are contiguous. If they are
|
|
* contiguous the virtual memory area is locked and a @res_vma is filled with
|
|
* the copy and @res_pa set to the physical address of the buffer.
|
|
*
|
|
* Returns 0 on success.
|
|
*/
|
|
int vb2_get_contig_userptr(unsigned long vaddr, unsigned long size,
|
|
struct vm_area_struct **res_vma, dma_addr_t *res_pa)
|
|
{
|
|
struct mm_struct *mm = current->mm;
|
|
struct vm_area_struct *vma;
|
|
unsigned long offset, start, end;
|
|
unsigned long this_pfn, prev_pfn;
|
|
dma_addr_t pa = 0;
|
|
int ret = -EFAULT;
|
|
|
|
start = vaddr;
|
|
offset = start & ~PAGE_MASK;
|
|
end = start + size;
|
|
|
|
down_read(&mm->mmap_sem);
|
|
vma = find_vma(mm, start);
|
|
|
|
if (vma == NULL || vma->vm_end < end)
|
|
goto done;
|
|
|
|
for (prev_pfn = 0; start < end; start += PAGE_SIZE) {
|
|
ret = follow_pfn(vma, start, &this_pfn);
|
|
if (ret)
|
|
goto done;
|
|
|
|
if (prev_pfn == 0)
|
|
pa = this_pfn << PAGE_SHIFT;
|
|
else if (this_pfn != prev_pfn + 1) {
|
|
ret = -EFAULT;
|
|
goto done;
|
|
}
|
|
prev_pfn = this_pfn;
|
|
}
|
|
|
|
/*
|
|
* Memory is contigous, lock vma and return to the caller
|
|
*/
|
|
*res_vma = vb2_get_vma(vma);
|
|
if (*res_vma == NULL) {
|
|
ret = -ENOMEM;
|
|
goto done;
|
|
}
|
|
*res_pa = pa + offset;
|
|
ret = 0;
|
|
|
|
done:
|
|
up_read(&mm->mmap_sem);
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(vb2_get_contig_userptr);
|
|
|
|
/**
|
|
* vb2_mmap_pfn_range() - map physical pages to userspace
|
|
* @vma: virtual memory region for the mapping
|
|
* @paddr: starting physical address of the memory to be mapped
|
|
* @size: size of the memory to be mapped
|
|
* @vm_ops: vm operations to be assigned to the created area
|
|
* @priv: private data to be associated with the area
|
|
*
|
|
* Returns 0 on success.
|
|
*/
|
|
int vb2_mmap_pfn_range(struct vm_area_struct *vma, unsigned long paddr,
|
|
unsigned long size,
|
|
const struct vm_operations_struct *vm_ops,
|
|
void *priv)
|
|
{
|
|
int ret;
|
|
|
|
size = min_t(unsigned long, vma->vm_end - vma->vm_start, size);
|
|
|
|
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
|
|
ret = remap_pfn_range(vma, vma->vm_start, paddr >> PAGE_SHIFT,
|
|
size, vma->vm_page_prot);
|
|
if (ret) {
|
|
printk(KERN_ERR "Remapping memory failed, error: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
vma->vm_flags |= VM_DONTEXPAND | VM_RESERVED;
|
|
vma->vm_private_data = priv;
|
|
vma->vm_ops = vm_ops;
|
|
|
|
vma->vm_ops->open(vma);
|
|
|
|
pr_debug("%s: mapped paddr 0x%08lx at 0x%08lx, size %ld\n",
|
|
__func__, paddr, vma->vm_start, size);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(vb2_mmap_pfn_range);
|
|
|
|
/**
|
|
* vb2_common_vm_open() - increase refcount of the vma
|
|
* @vma: virtual memory region for the mapping
|
|
*
|
|
* This function adds another user to the provided vma. It expects
|
|
* struct vb2_vmarea_handler pointer in vma->vm_private_data.
|
|
*/
|
|
static void vb2_common_vm_open(struct vm_area_struct *vma)
|
|
{
|
|
struct vb2_vmarea_handler *h = vma->vm_private_data;
|
|
|
|
pr_debug("%s: %p, refcount: %d, vma: %08lx-%08lx\n",
|
|
__func__, h, atomic_read(h->refcount), vma->vm_start,
|
|
vma->vm_end);
|
|
|
|
atomic_inc(h->refcount);
|
|
}
|
|
|
|
/**
|
|
* vb2_common_vm_close() - decrease refcount of the vma
|
|
* @vma: virtual memory region for the mapping
|
|
*
|
|
* This function releases the user from the provided vma. It expects
|
|
* struct vb2_vmarea_handler pointer in vma->vm_private_data.
|
|
*/
|
|
static void vb2_common_vm_close(struct vm_area_struct *vma)
|
|
{
|
|
struct vb2_vmarea_handler *h = vma->vm_private_data;
|
|
|
|
pr_debug("%s: %p, refcount: %d, vma: %08lx-%08lx\n",
|
|
__func__, h, atomic_read(h->refcount), vma->vm_start,
|
|
vma->vm_end);
|
|
|
|
h->put(h->arg);
|
|
}
|
|
|
|
/**
|
|
* vb2_common_vm_ops - common vm_ops used for tracking refcount of mmaped
|
|
* video buffers
|
|
*/
|
|
const struct vm_operations_struct vb2_common_vm_ops = {
|
|
.open = vb2_common_vm_open,
|
|
.close = vb2_common_vm_close,
|
|
};
|
|
EXPORT_SYMBOL_GPL(vb2_common_vm_ops);
|
|
|
|
MODULE_DESCRIPTION("common memory handling routines for videobuf2");
|
|
MODULE_AUTHOR("Pawel Osciak <pawel@osciak.com>");
|
|
MODULE_LICENSE("GPL");
|