1
linux/drivers/regulator/ab8500.c
Douglas Anderson 259b93b21a
regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in 4.14
Probing of regulators can be a slow operation and can contribute to
slower boot times. This is especially true if a regulator is turned on
at probe time (with regulator-boot-on or regulator-always-on) and the
regulator requires delays (off-on-time, ramp time, etc).

While the overall kernel is not ready to switch to async probe by
default, as per the discussion on the mailing lists [1] it is believed
that the regulator subsystem is in good shape and we can move
regulator drivers over wholesale. There is no way to just magically
opt in all regulators (regulators are just normal drivers like
platform_driver), so we set PROBE_PREFER_ASYNCHRONOUS for all
regulators found in 'drivers/regulator' individually.

Given the number of drivers touched and the impossibility to test this
ahead of time, it wouldn't be shocking at all if this caused a
regression for someone. If there is a regression caused by this patch,
it's likely to be one of the cases talked about in [1]. As a "quick
fix", drivers involved in the regression could be fixed by changing
them to PROBE_FORCE_SYNCHRONOUS. That being said, the correct fix
would be to directly fix the problem that caused the issue with async
probe.

The approach here follows a similar approach that was used for the mmc
subsystem several years ago [2]. In fact, I ran nearly the same python
script to auto-generate the changes. The only thing I changed was to
search for "i2c_driver", "spmi_driver", and "spi_driver" in addition
to "platform_driver".

[1] https://lore.kernel.org/r/06db017f-e985-4434-8d1d-02ca2100cca0@sirena.org.uk
[2] https://lore.kernel.org/r/20200903232441.2694866-1-dianders@chromium.org/

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230316125351.1.I2a4677392a38db5758dee0788b2cea5872562a82@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-03-20 13:11:25 +00:00

1768 lines
43 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) ST-Ericsson SA 2010
*
* Authors: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
* Bengt Jonsson <bengt.g.jonsson@stericsson.com> for ST-Ericsson
* Daniel Willerud <daniel.willerud@stericsson.com> for ST-Ericsson
*
* AB8500 peripheral regulators
*
* AB8500 supports the following regulators:
* VAUX1/2/3, VINTCORE, VTVOUT, VUSB, VAUDIO, VAMIC1/2, VDMIC, VANA
*
* AB8505 supports the following regulators:
* VAUX1/2/3/4/5/6, VINTCORE, VADC, VUSB, VAUDIO, VAMIC1/2, VDMIC, VANA
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/mfd/abx500.h>
#include <linux/mfd/abx500/ab8500.h>
#include <linux/of.h>
#include <linux/regulator/of_regulator.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/slab.h>
/* AB8500 regulators */
enum ab8500_regulator_id {
AB8500_LDO_AUX1,
AB8500_LDO_AUX2,
AB8500_LDO_AUX3,
AB8500_LDO_INTCORE,
AB8500_LDO_TVOUT,
AB8500_LDO_AUDIO,
AB8500_LDO_ANAMIC1,
AB8500_LDO_ANAMIC2,
AB8500_LDO_DMIC,
AB8500_LDO_ANA,
AB8500_NUM_REGULATORS,
};
/* AB8505 regulators */
enum ab8505_regulator_id {
AB8505_LDO_AUX1,
AB8505_LDO_AUX2,
AB8505_LDO_AUX3,
AB8505_LDO_AUX4,
AB8505_LDO_AUX5,
AB8505_LDO_AUX6,
AB8505_LDO_INTCORE,
AB8505_LDO_ADC,
AB8505_LDO_AUDIO,
AB8505_LDO_ANAMIC1,
AB8505_LDO_ANAMIC2,
AB8505_LDO_AUX8,
AB8505_LDO_ANA,
AB8505_NUM_REGULATORS,
};
/* AB8500 registers */
enum ab8500_regulator_reg {
AB8500_REGUREQUESTCTRL2,
AB8500_REGUREQUESTCTRL3,
AB8500_REGUREQUESTCTRL4,
AB8500_REGUSYSCLKREQ1HPVALID1,
AB8500_REGUSYSCLKREQ1HPVALID2,
AB8500_REGUHWHPREQ1VALID1,
AB8500_REGUHWHPREQ1VALID2,
AB8500_REGUHWHPREQ2VALID1,
AB8500_REGUHWHPREQ2VALID2,
AB8500_REGUSWHPREQVALID1,
AB8500_REGUSWHPREQVALID2,
AB8500_REGUSYSCLKREQVALID1,
AB8500_REGUSYSCLKREQVALID2,
AB8500_REGUMISC1,
AB8500_VAUDIOSUPPLY,
AB8500_REGUCTRL1VAMIC,
AB8500_VPLLVANAREGU,
AB8500_VREFDDR,
AB8500_EXTSUPPLYREGU,
AB8500_VAUX12REGU,
AB8500_VRF1VAUX3REGU,
AB8500_VAUX1SEL,
AB8500_VAUX2SEL,
AB8500_VRF1VAUX3SEL,
AB8500_REGUCTRL2SPARE,
AB8500_REGUCTRLDISCH,
AB8500_REGUCTRLDISCH2,
AB8500_NUM_REGULATOR_REGISTERS,
};
/* AB8505 registers */
enum ab8505_regulator_reg {
AB8505_REGUREQUESTCTRL1,
AB8505_REGUREQUESTCTRL2,
AB8505_REGUREQUESTCTRL3,
AB8505_REGUREQUESTCTRL4,
AB8505_REGUSYSCLKREQ1HPVALID1,
AB8505_REGUSYSCLKREQ1HPVALID2,
AB8505_REGUHWHPREQ1VALID1,
AB8505_REGUHWHPREQ1VALID2,
AB8505_REGUHWHPREQ2VALID1,
AB8505_REGUHWHPREQ2VALID2,
AB8505_REGUSWHPREQVALID1,
AB8505_REGUSWHPREQVALID2,
AB8505_REGUSYSCLKREQVALID1,
AB8505_REGUSYSCLKREQVALID2,
AB8505_REGUVAUX4REQVALID,
AB8505_REGUMISC1,
AB8505_VAUDIOSUPPLY,
AB8505_REGUCTRL1VAMIC,
AB8505_VSMPSAREGU,
AB8505_VSMPSBREGU,
AB8505_VSAFEREGU, /* NOTE! PRCMU register */
AB8505_VPLLVANAREGU,
AB8505_EXTSUPPLYREGU,
AB8505_VAUX12REGU,
AB8505_VRF1VAUX3REGU,
AB8505_VSMPSASEL1,
AB8505_VSMPSASEL2,
AB8505_VSMPSASEL3,
AB8505_VSMPSBSEL1,
AB8505_VSMPSBSEL2,
AB8505_VSMPSBSEL3,
AB8505_VSAFESEL1, /* NOTE! PRCMU register */
AB8505_VSAFESEL2, /* NOTE! PRCMU register */
AB8505_VSAFESEL3, /* NOTE! PRCMU register */
AB8505_VAUX1SEL,
AB8505_VAUX2SEL,
AB8505_VRF1VAUX3SEL,
AB8505_VAUX4REQCTRL,
AB8505_VAUX4REGU,
AB8505_VAUX4SEL,
AB8505_REGUCTRLDISCH,
AB8505_REGUCTRLDISCH2,
AB8505_REGUCTRLDISCH3,
AB8505_CTRLVAUX5,
AB8505_CTRLVAUX6,
AB8505_NUM_REGULATOR_REGISTERS,
};
/**
* struct ab8500_shared_mode - is used when mode is shared between
* two regulators.
* @shared_regulator: pointer to the other sharing regulator
* @lp_mode_req: low power mode requested by this regulator
*/
struct ab8500_shared_mode {
struct ab8500_regulator_info *shared_regulator;
bool lp_mode_req;
};
/**
* struct ab8500_regulator_info - ab8500 regulator information
* @dev: device pointer
* @desc: regulator description
* @shared_mode: used when mode is shared between two regulators
* @load_lp_uA: maximum load in idle (low power) mode
* @update_bank: bank to control on/off
* @update_reg: register to control on/off
* @update_mask: mask to enable/disable and set mode of regulator
* @update_val: bits holding the regulator current mode
* @update_val_idle: bits to enable the regulator in idle (low power) mode
* @update_val_normal: bits to enable the regulator in normal (high power) mode
* @mode_bank: bank with location of mode register
* @mode_reg: mode register
* @mode_mask: mask for setting mode
* @mode_val_idle: mode setting for low power
* @mode_val_normal: mode setting for normal power
* @voltage_bank: bank to control regulator voltage
* @voltage_reg: register to control regulator voltage
* @voltage_mask: mask to control regulator voltage
* @expand_register:
*/
struct ab8500_regulator_info {
struct device *dev;
struct regulator_desc desc;
struct ab8500_shared_mode *shared_mode;
int load_lp_uA;
u8 update_bank;
u8 update_reg;
u8 update_mask;
u8 update_val;
u8 update_val_idle;
u8 update_val_normal;
u8 mode_bank;
u8 mode_reg;
u8 mode_mask;
u8 mode_val_idle;
u8 mode_val_normal;
u8 voltage_bank;
u8 voltage_reg;
u8 voltage_mask;
};
/* voltage tables for the vauxn/vintcore supplies */
static const unsigned int ldo_vauxn_voltages[] = {
1100000,
1200000,
1300000,
1400000,
1500000,
1800000,
1850000,
1900000,
2500000,
2650000,
2700000,
2750000,
2800000,
2900000,
3000000,
3300000,
};
static const unsigned int ldo_vaux3_voltages[] = {
1200000,
1500000,
1800000,
2100000,
2500000,
2750000,
2790000,
2910000,
};
static const unsigned int ldo_vaux56_voltages[] = {
1800000,
1050000,
1100000,
1200000,
1500000,
2200000,
2500000,
2790000,
};
static const unsigned int ldo_vintcore_voltages[] = {
1200000,
1225000,
1250000,
1275000,
1300000,
1325000,
1350000,
};
static const unsigned int fixed_1200000_voltage[] = {
1200000,
};
static const unsigned int fixed_1800000_voltage[] = {
1800000,
};
static const unsigned int fixed_2000000_voltage[] = {
2000000,
};
static const unsigned int fixed_2050000_voltage[] = {
2050000,
};
static const unsigned int ldo_vana_voltages[] = {
1050000,
1075000,
1100000,
1125000,
1150000,
1175000,
1200000,
1225000,
};
static const unsigned int ldo_vaudio_voltages[] = {
2000000,
2100000,
2200000,
2300000,
2400000,
2500000,
2600000,
2600000, /* Duplicated in Vaudio and IsoUicc Control register. */
};
static DEFINE_MUTEX(shared_mode_mutex);
static struct ab8500_shared_mode ldo_anamic1_shared;
static struct ab8500_shared_mode ldo_anamic2_shared;
static int ab8500_regulator_enable(struct regulator_dev *rdev)
{
int ret;
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
if (info == NULL) {
dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
return -EINVAL;
}
ret = abx500_mask_and_set_register_interruptible(info->dev,
info->update_bank, info->update_reg,
info->update_mask, info->update_val);
if (ret < 0) {
dev_err(rdev_get_dev(rdev),
"couldn't set enable bits for regulator\n");
return ret;
}
dev_vdbg(rdev_get_dev(rdev),
"%s-enable (bank, reg, mask, value): 0x%x, 0x%x, 0x%x, 0x%x\n",
info->desc.name, info->update_bank, info->update_reg,
info->update_mask, info->update_val);
return ret;
}
static int ab8500_regulator_disable(struct regulator_dev *rdev)
{
int ret;
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
if (info == NULL) {
dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
return -EINVAL;
}
ret = abx500_mask_and_set_register_interruptible(info->dev,
info->update_bank, info->update_reg,
info->update_mask, 0x0);
if (ret < 0) {
dev_err(rdev_get_dev(rdev),
"couldn't set disable bits for regulator\n");
return ret;
}
dev_vdbg(rdev_get_dev(rdev),
"%s-disable (bank, reg, mask, value): 0x%x, 0x%x, 0x%x, 0x%x\n",
info->desc.name, info->update_bank, info->update_reg,
info->update_mask, 0x0);
return ret;
}
static int ab8500_regulator_is_enabled(struct regulator_dev *rdev)
{
int ret;
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
u8 regval;
if (info == NULL) {
dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
return -EINVAL;
}
ret = abx500_get_register_interruptible(info->dev,
info->update_bank, info->update_reg, &regval);
if (ret < 0) {
dev_err(rdev_get_dev(rdev),
"couldn't read 0x%x register\n", info->update_reg);
return ret;
}
dev_vdbg(rdev_get_dev(rdev),
"%s-is_enabled (bank, reg, mask, value): 0x%x, 0x%x, 0x%x,"
" 0x%x\n",
info->desc.name, info->update_bank, info->update_reg,
info->update_mask, regval);
if (regval & info->update_mask)
return 1;
else
return 0;
}
static unsigned int ab8500_regulator_get_optimum_mode(
struct regulator_dev *rdev, int input_uV,
int output_uV, int load_uA)
{
unsigned int mode;
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
if (info == NULL) {
dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
return -EINVAL;
}
if (load_uA <= info->load_lp_uA)
mode = REGULATOR_MODE_IDLE;
else
mode = REGULATOR_MODE_NORMAL;
return mode;
}
static int ab8500_regulator_set_mode(struct regulator_dev *rdev,
unsigned int mode)
{
int ret = 0;
u8 bank, reg, mask, val;
bool lp_mode_req = false;
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
if (info == NULL) {
dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
return -EINVAL;
}
if (info->mode_mask) {
bank = info->mode_bank;
reg = info->mode_reg;
mask = info->mode_mask;
} else {
bank = info->update_bank;
reg = info->update_reg;
mask = info->update_mask;
}
if (info->shared_mode)
mutex_lock(&shared_mode_mutex);
switch (mode) {
case REGULATOR_MODE_NORMAL:
if (info->shared_mode)
lp_mode_req = false;
if (info->mode_mask)
val = info->mode_val_normal;
else
val = info->update_val_normal;
break;
case REGULATOR_MODE_IDLE:
if (info->shared_mode) {
struct ab8500_regulator_info *shared_regulator;
shared_regulator = info->shared_mode->shared_regulator;
if (!shared_regulator->shared_mode->lp_mode_req) {
/* Other regulator prevent LP mode */
info->shared_mode->lp_mode_req = true;
goto out_unlock;
}
lp_mode_req = true;
}
if (info->mode_mask)
val = info->mode_val_idle;
else
val = info->update_val_idle;
break;
default:
ret = -EINVAL;
goto out_unlock;
}
if (info->mode_mask || ab8500_regulator_is_enabled(rdev)) {
ret = abx500_mask_and_set_register_interruptible(info->dev,
bank, reg, mask, val);
if (ret < 0) {
dev_err(rdev_get_dev(rdev),
"couldn't set regulator mode\n");
goto out_unlock;
}
dev_vdbg(rdev_get_dev(rdev),
"%s-set_mode (bank, reg, mask, value): "
"0x%x, 0x%x, 0x%x, 0x%x\n",
info->desc.name, bank, reg,
mask, val);
}
if (!info->mode_mask)
info->update_val = val;
if (info->shared_mode)
info->shared_mode->lp_mode_req = lp_mode_req;
out_unlock:
if (info->shared_mode)
mutex_unlock(&shared_mode_mutex);
return ret;
}
static unsigned int ab8500_regulator_get_mode(struct regulator_dev *rdev)
{
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
int ret;
u8 val;
u8 val_normal;
u8 val_idle;
if (info == NULL) {
dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
return -EINVAL;
}
/* Need special handling for shared mode */
if (info->shared_mode) {
if (info->shared_mode->lp_mode_req)
return REGULATOR_MODE_IDLE;
else
return REGULATOR_MODE_NORMAL;
}
if (info->mode_mask) {
/* Dedicated register for handling mode */
ret = abx500_get_register_interruptible(info->dev,
info->mode_bank, info->mode_reg, &val);
val = val & info->mode_mask;
val_normal = info->mode_val_normal;
val_idle = info->mode_val_idle;
} else {
/* Mode register same as enable register */
val = info->update_val;
val_normal = info->update_val_normal;
val_idle = info->update_val_idle;
}
if (val == val_normal)
ret = REGULATOR_MODE_NORMAL;
else if (val == val_idle)
ret = REGULATOR_MODE_IDLE;
else
ret = -EINVAL;
return ret;
}
static int ab8500_regulator_get_voltage_sel(struct regulator_dev *rdev)
{
int ret, voltage_shift;
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
u8 regval;
if (info == NULL) {
dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
return -EINVAL;
}
voltage_shift = ffs(info->voltage_mask) - 1;
ret = abx500_get_register_interruptible(info->dev,
info->voltage_bank, info->voltage_reg, &regval);
if (ret < 0) {
dev_err(rdev_get_dev(rdev),
"couldn't read voltage reg for regulator\n");
return ret;
}
dev_vdbg(rdev_get_dev(rdev),
"%s-get_voltage (bank, reg, mask, shift, value): "
"0x%x, 0x%x, 0x%x, 0x%x, 0x%x\n",
info->desc.name, info->voltage_bank,
info->voltage_reg, info->voltage_mask,
voltage_shift, regval);
return (regval & info->voltage_mask) >> voltage_shift;
}
static int ab8500_regulator_set_voltage_sel(struct regulator_dev *rdev,
unsigned selector)
{
int ret, voltage_shift;
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
u8 regval;
if (info == NULL) {
dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
return -EINVAL;
}
voltage_shift = ffs(info->voltage_mask) - 1;
/* set the registers for the request */
regval = (u8)selector << voltage_shift;
ret = abx500_mask_and_set_register_interruptible(info->dev,
info->voltage_bank, info->voltage_reg,
info->voltage_mask, regval);
if (ret < 0)
dev_err(rdev_get_dev(rdev),
"couldn't set voltage reg for regulator\n");
dev_vdbg(rdev_get_dev(rdev),
"%s-set_voltage (bank, reg, mask, value): 0x%x, 0x%x, 0x%x,"
" 0x%x\n",
info->desc.name, info->voltage_bank, info->voltage_reg,
info->voltage_mask, regval);
return ret;
}
static const struct regulator_ops ab8500_regulator_volt_mode_ops = {
.enable = ab8500_regulator_enable,
.disable = ab8500_regulator_disable,
.is_enabled = ab8500_regulator_is_enabled,
.get_optimum_mode = ab8500_regulator_get_optimum_mode,
.set_mode = ab8500_regulator_set_mode,
.get_mode = ab8500_regulator_get_mode,
.get_voltage_sel = ab8500_regulator_get_voltage_sel,
.set_voltage_sel = ab8500_regulator_set_voltage_sel,
.list_voltage = regulator_list_voltage_table,
};
static const struct regulator_ops ab8500_regulator_volt_ops = {
.enable = ab8500_regulator_enable,
.disable = ab8500_regulator_disable,
.is_enabled = ab8500_regulator_is_enabled,
.get_voltage_sel = ab8500_regulator_get_voltage_sel,
.set_voltage_sel = ab8500_regulator_set_voltage_sel,
.list_voltage = regulator_list_voltage_table,
};
static const struct regulator_ops ab8500_regulator_mode_ops = {
.enable = ab8500_regulator_enable,
.disable = ab8500_regulator_disable,
.is_enabled = ab8500_regulator_is_enabled,
.get_optimum_mode = ab8500_regulator_get_optimum_mode,
.set_mode = ab8500_regulator_set_mode,
.get_mode = ab8500_regulator_get_mode,
.list_voltage = regulator_list_voltage_table,
};
static const struct regulator_ops ab8500_regulator_ops = {
.enable = ab8500_regulator_enable,
.disable = ab8500_regulator_disable,
.is_enabled = ab8500_regulator_is_enabled,
.list_voltage = regulator_list_voltage_table,
};
static const struct regulator_ops ab8500_regulator_anamic_mode_ops = {
.enable = ab8500_regulator_enable,
.disable = ab8500_regulator_disable,
.is_enabled = ab8500_regulator_is_enabled,
.set_mode = ab8500_regulator_set_mode,
.get_mode = ab8500_regulator_get_mode,
.list_voltage = regulator_list_voltage_table,
};
/* AB8500 regulator information */
static struct ab8500_regulator_info
ab8500_regulator_info[AB8500_NUM_REGULATORS] = {
/*
* Variable Voltage Regulators
* name, min mV, max mV,
* update bank, reg, mask, enable val
* volt bank, reg, mask
*/
[AB8500_LDO_AUX1] = {
.desc = {
.name = "LDO-AUX1",
.ops = &ab8500_regulator_volt_mode_ops,
.type = REGULATOR_VOLTAGE,
.id = AB8500_LDO_AUX1,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
.volt_table = ldo_vauxn_voltages,
.enable_time = 200,
.supply_name = "vin",
},
.load_lp_uA = 5000,
.update_bank = 0x04,
.update_reg = 0x09,
.update_mask = 0x03,
.update_val = 0x01,
.update_val_idle = 0x03,
.update_val_normal = 0x01,
.voltage_bank = 0x04,
.voltage_reg = 0x1f,
.voltage_mask = 0x0f,
},
[AB8500_LDO_AUX2] = {
.desc = {
.name = "LDO-AUX2",
.ops = &ab8500_regulator_volt_mode_ops,
.type = REGULATOR_VOLTAGE,
.id = AB8500_LDO_AUX2,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
.volt_table = ldo_vauxn_voltages,
.enable_time = 200,
.supply_name = "vin",
},
.load_lp_uA = 5000,
.update_bank = 0x04,
.update_reg = 0x09,
.update_mask = 0x0c,
.update_val = 0x04,
.update_val_idle = 0x0c,
.update_val_normal = 0x04,
.voltage_bank = 0x04,
.voltage_reg = 0x20,
.voltage_mask = 0x0f,
},
[AB8500_LDO_AUX3] = {
.desc = {
.name = "LDO-AUX3",
.ops = &ab8500_regulator_volt_mode_ops,
.type = REGULATOR_VOLTAGE,
.id = AB8500_LDO_AUX3,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vaux3_voltages),
.volt_table = ldo_vaux3_voltages,
.enable_time = 450,
.supply_name = "vin",
},
.load_lp_uA = 5000,
.update_bank = 0x04,
.update_reg = 0x0a,
.update_mask = 0x03,
.update_val = 0x01,
.update_val_idle = 0x03,
.update_val_normal = 0x01,
.voltage_bank = 0x04,
.voltage_reg = 0x21,
.voltage_mask = 0x07,
},
[AB8500_LDO_INTCORE] = {
.desc = {
.name = "LDO-INTCORE",
.ops = &ab8500_regulator_volt_mode_ops,
.type = REGULATOR_VOLTAGE,
.id = AB8500_LDO_INTCORE,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vintcore_voltages),
.volt_table = ldo_vintcore_voltages,
.enable_time = 750,
},
.load_lp_uA = 5000,
.update_bank = 0x03,
.update_reg = 0x80,
.update_mask = 0x44,
.update_val = 0x44,
.update_val_idle = 0x44,
.update_val_normal = 0x04,
.voltage_bank = 0x03,
.voltage_reg = 0x80,
.voltage_mask = 0x38,
},
/*
* Fixed Voltage Regulators
* name, fixed mV,
* update bank, reg, mask, enable val
*/
[AB8500_LDO_TVOUT] = {
.desc = {
.name = "LDO-TVOUT",
.ops = &ab8500_regulator_mode_ops,
.type = REGULATOR_VOLTAGE,
.id = AB8500_LDO_TVOUT,
.owner = THIS_MODULE,
.n_voltages = 1,
.volt_table = fixed_2000000_voltage,
.enable_time = 500,
},
.load_lp_uA = 1000,
.update_bank = 0x03,
.update_reg = 0x80,
.update_mask = 0x82,
.update_val = 0x02,
.update_val_idle = 0x82,
.update_val_normal = 0x02,
},
[AB8500_LDO_AUDIO] = {
.desc = {
.name = "LDO-AUDIO",
.ops = &ab8500_regulator_ops,
.type = REGULATOR_VOLTAGE,
.id = AB8500_LDO_AUDIO,
.owner = THIS_MODULE,
.n_voltages = 1,
.enable_time = 140,
.volt_table = fixed_2000000_voltage,
},
.update_bank = 0x03,
.update_reg = 0x83,
.update_mask = 0x02,
.update_val = 0x02,
},
[AB8500_LDO_ANAMIC1] = {
.desc = {
.name = "LDO-ANAMIC1",
.ops = &ab8500_regulator_ops,
.type = REGULATOR_VOLTAGE,
.id = AB8500_LDO_ANAMIC1,
.owner = THIS_MODULE,
.n_voltages = 1,
.enable_time = 500,
.volt_table = fixed_2050000_voltage,
},
.update_bank = 0x03,
.update_reg = 0x83,
.update_mask = 0x08,
.update_val = 0x08,
},
[AB8500_LDO_ANAMIC2] = {
.desc = {
.name = "LDO-ANAMIC2",
.ops = &ab8500_regulator_ops,
.type = REGULATOR_VOLTAGE,
.id = AB8500_LDO_ANAMIC2,
.owner = THIS_MODULE,
.n_voltages = 1,
.enable_time = 500,
.volt_table = fixed_2050000_voltage,
},
.update_bank = 0x03,
.update_reg = 0x83,
.update_mask = 0x10,
.update_val = 0x10,
},
[AB8500_LDO_DMIC] = {
.desc = {
.name = "LDO-DMIC",
.ops = &ab8500_regulator_ops,
.type = REGULATOR_VOLTAGE,
.id = AB8500_LDO_DMIC,
.owner = THIS_MODULE,
.n_voltages = 1,
.enable_time = 420,
.volt_table = fixed_1800000_voltage,
},
.update_bank = 0x03,
.update_reg = 0x83,
.update_mask = 0x04,
.update_val = 0x04,
},
/*
* Regulators with fixed voltage and normal/idle modes
*/
[AB8500_LDO_ANA] = {
.desc = {
.name = "LDO-ANA",
.ops = &ab8500_regulator_mode_ops,
.type = REGULATOR_VOLTAGE,
.id = AB8500_LDO_ANA,
.owner = THIS_MODULE,
.n_voltages = 1,
.enable_time = 140,
.volt_table = fixed_1200000_voltage,
},
.load_lp_uA = 1000,
.update_bank = 0x04,
.update_reg = 0x06,
.update_mask = 0x0c,
.update_val = 0x04,
.update_val_idle = 0x0c,
.update_val_normal = 0x04,
},
};
/* AB8505 regulator information */
static struct ab8500_regulator_info
ab8505_regulator_info[AB8505_NUM_REGULATORS] = {
/*
* Variable Voltage Regulators
* name, min mV, max mV,
* update bank, reg, mask, enable val
* volt bank, reg, mask
*/
[AB8505_LDO_AUX1] = {
.desc = {
.name = "LDO-AUX1",
.ops = &ab8500_regulator_volt_mode_ops,
.type = REGULATOR_VOLTAGE,
.id = AB8505_LDO_AUX1,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
.volt_table = ldo_vauxn_voltages,
},
.load_lp_uA = 5000,
.update_bank = 0x04,
.update_reg = 0x09,
.update_mask = 0x03,
.update_val = 0x01,
.update_val_idle = 0x03,
.update_val_normal = 0x01,
.voltage_bank = 0x04,
.voltage_reg = 0x1f,
.voltage_mask = 0x0f,
},
[AB8505_LDO_AUX2] = {
.desc = {
.name = "LDO-AUX2",
.ops = &ab8500_regulator_volt_mode_ops,
.type = REGULATOR_VOLTAGE,
.id = AB8505_LDO_AUX2,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
.volt_table = ldo_vauxn_voltages,
},
.load_lp_uA = 5000,
.update_bank = 0x04,
.update_reg = 0x09,
.update_mask = 0x0c,
.update_val = 0x04,
.update_val_idle = 0x0c,
.update_val_normal = 0x04,
.voltage_bank = 0x04,
.voltage_reg = 0x20,
.voltage_mask = 0x0f,
},
[AB8505_LDO_AUX3] = {
.desc = {
.name = "LDO-AUX3",
.ops = &ab8500_regulator_volt_mode_ops,
.type = REGULATOR_VOLTAGE,
.id = AB8505_LDO_AUX3,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vaux3_voltages),
.volt_table = ldo_vaux3_voltages,
},
.load_lp_uA = 5000,
.update_bank = 0x04,
.update_reg = 0x0a,
.update_mask = 0x03,
.update_val = 0x01,
.update_val_idle = 0x03,
.update_val_normal = 0x01,
.voltage_bank = 0x04,
.voltage_reg = 0x21,
.voltage_mask = 0x07,
},
[AB8505_LDO_AUX4] = {
.desc = {
.name = "LDO-AUX4",
.ops = &ab8500_regulator_volt_mode_ops,
.type = REGULATOR_VOLTAGE,
.id = AB8505_LDO_AUX4,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
.volt_table = ldo_vauxn_voltages,
},
.load_lp_uA = 5000,
/* values for Vaux4Regu register */
.update_bank = 0x04,
.update_reg = 0x2e,
.update_mask = 0x03,
.update_val = 0x01,
.update_val_idle = 0x03,
.update_val_normal = 0x01,
/* values for Vaux4SEL register */
.voltage_bank = 0x04,
.voltage_reg = 0x2f,
.voltage_mask = 0x0f,
},
[AB8505_LDO_AUX5] = {
.desc = {
.name = "LDO-AUX5",
.ops = &ab8500_regulator_volt_mode_ops,
.type = REGULATOR_VOLTAGE,
.id = AB8505_LDO_AUX5,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vaux56_voltages),
.volt_table = ldo_vaux56_voltages,
},
.load_lp_uA = 2000,
/* values for CtrlVaux5 register */
.update_bank = 0x01,
.update_reg = 0x55,
.update_mask = 0x18,
.update_val = 0x10,
.update_val_idle = 0x18,
.update_val_normal = 0x10,
.voltage_bank = 0x01,
.voltage_reg = 0x55,
.voltage_mask = 0x07,
},
[AB8505_LDO_AUX6] = {
.desc = {
.name = "LDO-AUX6",
.ops = &ab8500_regulator_volt_mode_ops,
.type = REGULATOR_VOLTAGE,
.id = AB8505_LDO_AUX6,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vaux56_voltages),
.volt_table = ldo_vaux56_voltages,
},
.load_lp_uA = 2000,
/* values for CtrlVaux6 register */
.update_bank = 0x01,
.update_reg = 0x56,
.update_mask = 0x18,
.update_val = 0x10,
.update_val_idle = 0x18,
.update_val_normal = 0x10,
.voltage_bank = 0x01,
.voltage_reg = 0x56,
.voltage_mask = 0x07,
},
[AB8505_LDO_INTCORE] = {
.desc = {
.name = "LDO-INTCORE",
.ops = &ab8500_regulator_volt_mode_ops,
.type = REGULATOR_VOLTAGE,
.id = AB8505_LDO_INTCORE,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vintcore_voltages),
.volt_table = ldo_vintcore_voltages,
},
.load_lp_uA = 5000,
.update_bank = 0x03,
.update_reg = 0x80,
.update_mask = 0x44,
.update_val = 0x04,
.update_val_idle = 0x44,
.update_val_normal = 0x04,
.voltage_bank = 0x03,
.voltage_reg = 0x80,
.voltage_mask = 0x38,
},
/*
* Fixed Voltage Regulators
* name, fixed mV,
* update bank, reg, mask, enable val
*/
[AB8505_LDO_ADC] = {
.desc = {
.name = "LDO-ADC",
.ops = &ab8500_regulator_mode_ops,
.type = REGULATOR_VOLTAGE,
.id = AB8505_LDO_ADC,
.owner = THIS_MODULE,
.n_voltages = 1,
.volt_table = fixed_2000000_voltage,
.enable_time = 10000,
},
.load_lp_uA = 1000,
.update_bank = 0x03,
.update_reg = 0x80,
.update_mask = 0x82,
.update_val = 0x02,
.update_val_idle = 0x82,
.update_val_normal = 0x02,
},
[AB8505_LDO_AUDIO] = {
.desc = {
.name = "LDO-AUDIO",
.ops = &ab8500_regulator_volt_ops,
.type = REGULATOR_VOLTAGE,
.id = AB8505_LDO_AUDIO,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vaudio_voltages),
.volt_table = ldo_vaudio_voltages,
},
.update_bank = 0x03,
.update_reg = 0x83,
.update_mask = 0x02,
.update_val = 0x02,
.voltage_bank = 0x01,
.voltage_reg = 0x57,
.voltage_mask = 0x70,
},
[AB8505_LDO_ANAMIC1] = {
.desc = {
.name = "LDO-ANAMIC1",
.ops = &ab8500_regulator_anamic_mode_ops,
.type = REGULATOR_VOLTAGE,
.id = AB8505_LDO_ANAMIC1,
.owner = THIS_MODULE,
.n_voltages = 1,
.volt_table = fixed_2050000_voltage,
},
.shared_mode = &ldo_anamic1_shared,
.update_bank = 0x03,
.update_reg = 0x83,
.update_mask = 0x08,
.update_val = 0x08,
.mode_bank = 0x01,
.mode_reg = 0x54,
.mode_mask = 0x04,
.mode_val_idle = 0x04,
.mode_val_normal = 0x00,
},
[AB8505_LDO_ANAMIC2] = {
.desc = {
.name = "LDO-ANAMIC2",
.ops = &ab8500_regulator_anamic_mode_ops,
.type = REGULATOR_VOLTAGE,
.id = AB8505_LDO_ANAMIC2,
.owner = THIS_MODULE,
.n_voltages = 1,
.volt_table = fixed_2050000_voltage,
},
.shared_mode = &ldo_anamic2_shared,
.update_bank = 0x03,
.update_reg = 0x83,
.update_mask = 0x10,
.update_val = 0x10,
.mode_bank = 0x01,
.mode_reg = 0x54,
.mode_mask = 0x04,
.mode_val_idle = 0x04,
.mode_val_normal = 0x00,
},
[AB8505_LDO_AUX8] = {
.desc = {
.name = "LDO-AUX8",
.ops = &ab8500_regulator_ops,
.type = REGULATOR_VOLTAGE,
.id = AB8505_LDO_AUX8,
.owner = THIS_MODULE,
.n_voltages = 1,
.volt_table = fixed_1800000_voltage,
},
.update_bank = 0x03,
.update_reg = 0x83,
.update_mask = 0x04,
.update_val = 0x04,
},
/*
* Regulators with fixed voltage and normal/idle modes
*/
[AB8505_LDO_ANA] = {
.desc = {
.name = "LDO-ANA",
.ops = &ab8500_regulator_volt_mode_ops,
.type = REGULATOR_VOLTAGE,
.id = AB8505_LDO_ANA,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vana_voltages),
.volt_table = ldo_vana_voltages,
},
.load_lp_uA = 1000,
.update_bank = 0x04,
.update_reg = 0x06,
.update_mask = 0x0c,
.update_val = 0x04,
.update_val_idle = 0x0c,
.update_val_normal = 0x04,
.voltage_bank = 0x04,
.voltage_reg = 0x29,
.voltage_mask = 0x7,
},
};
static struct ab8500_shared_mode ldo_anamic1_shared = {
.shared_regulator = &ab8505_regulator_info[AB8505_LDO_ANAMIC2],
};
static struct ab8500_shared_mode ldo_anamic2_shared = {
.shared_regulator = &ab8505_regulator_info[AB8505_LDO_ANAMIC1],
};
struct ab8500_reg_init {
u8 bank;
u8 addr;
u8 mask;
};
#define REG_INIT(_id, _bank, _addr, _mask) \
[_id] = { \
.bank = _bank, \
.addr = _addr, \
.mask = _mask, \
}
/* AB8500 register init */
static struct ab8500_reg_init ab8500_reg_init[] = {
/*
* 0x30, VanaRequestCtrl
* 0xc0, VextSupply1RequestCtrl
*/
REG_INIT(AB8500_REGUREQUESTCTRL2, 0x03, 0x04, 0xf0),
/*
* 0x03, VextSupply2RequestCtrl
* 0x0c, VextSupply3RequestCtrl
* 0x30, Vaux1RequestCtrl
* 0xc0, Vaux2RequestCtrl
*/
REG_INIT(AB8500_REGUREQUESTCTRL3, 0x03, 0x05, 0xff),
/*
* 0x03, Vaux3RequestCtrl
* 0x04, SwHPReq
*/
REG_INIT(AB8500_REGUREQUESTCTRL4, 0x03, 0x06, 0x07),
/*
* 0x08, VanaSysClkReq1HPValid
* 0x20, Vaux1SysClkReq1HPValid
* 0x40, Vaux2SysClkReq1HPValid
* 0x80, Vaux3SysClkReq1HPValid
*/
REG_INIT(AB8500_REGUSYSCLKREQ1HPVALID1, 0x03, 0x07, 0xe8),
/*
* 0x10, VextSupply1SysClkReq1HPValid
* 0x20, VextSupply2SysClkReq1HPValid
* 0x40, VextSupply3SysClkReq1HPValid
*/
REG_INIT(AB8500_REGUSYSCLKREQ1HPVALID2, 0x03, 0x08, 0x70),
/*
* 0x08, VanaHwHPReq1Valid
* 0x20, Vaux1HwHPReq1Valid
* 0x40, Vaux2HwHPReq1Valid
* 0x80, Vaux3HwHPReq1Valid
*/
REG_INIT(AB8500_REGUHWHPREQ1VALID1, 0x03, 0x09, 0xe8),
/*
* 0x01, VextSupply1HwHPReq1Valid
* 0x02, VextSupply2HwHPReq1Valid
* 0x04, VextSupply3HwHPReq1Valid
*/
REG_INIT(AB8500_REGUHWHPREQ1VALID2, 0x03, 0x0a, 0x07),
/*
* 0x08, VanaHwHPReq2Valid
* 0x20, Vaux1HwHPReq2Valid
* 0x40, Vaux2HwHPReq2Valid
* 0x80, Vaux3HwHPReq2Valid
*/
REG_INIT(AB8500_REGUHWHPREQ2VALID1, 0x03, 0x0b, 0xe8),
/*
* 0x01, VextSupply1HwHPReq2Valid
* 0x02, VextSupply2HwHPReq2Valid
* 0x04, VextSupply3HwHPReq2Valid
*/
REG_INIT(AB8500_REGUHWHPREQ2VALID2, 0x03, 0x0c, 0x07),
/*
* 0x20, VanaSwHPReqValid
* 0x80, Vaux1SwHPReqValid
*/
REG_INIT(AB8500_REGUSWHPREQVALID1, 0x03, 0x0d, 0xa0),
/*
* 0x01, Vaux2SwHPReqValid
* 0x02, Vaux3SwHPReqValid
* 0x04, VextSupply1SwHPReqValid
* 0x08, VextSupply2SwHPReqValid
* 0x10, VextSupply3SwHPReqValid
*/
REG_INIT(AB8500_REGUSWHPREQVALID2, 0x03, 0x0e, 0x1f),
/*
* 0x02, SysClkReq2Valid1
* 0x04, SysClkReq3Valid1
* 0x08, SysClkReq4Valid1
* 0x10, SysClkReq5Valid1
* 0x20, SysClkReq6Valid1
* 0x40, SysClkReq7Valid1
* 0x80, SysClkReq8Valid1
*/
REG_INIT(AB8500_REGUSYSCLKREQVALID1, 0x03, 0x0f, 0xfe),
/*
* 0x02, SysClkReq2Valid2
* 0x04, SysClkReq3Valid2
* 0x08, SysClkReq4Valid2
* 0x10, SysClkReq5Valid2
* 0x20, SysClkReq6Valid2
* 0x40, SysClkReq7Valid2
* 0x80, SysClkReq8Valid2
*/
REG_INIT(AB8500_REGUSYSCLKREQVALID2, 0x03, 0x10, 0xfe),
/*
* 0x02, VTVoutEna
* 0x04, Vintcore12Ena
* 0x38, Vintcore12Sel
* 0x40, Vintcore12LP
* 0x80, VTVoutLP
*/
REG_INIT(AB8500_REGUMISC1, 0x03, 0x80, 0xfe),
/*
* 0x02, VaudioEna
* 0x04, VdmicEna
* 0x08, Vamic1Ena
* 0x10, Vamic2Ena
*/
REG_INIT(AB8500_VAUDIOSUPPLY, 0x03, 0x83, 0x1e),
/*
* 0x01, Vamic1_dzout
* 0x02, Vamic2_dzout
*/
REG_INIT(AB8500_REGUCTRL1VAMIC, 0x03, 0x84, 0x03),
/*
* 0x03, VpllRegu (NOTE! PRCMU register bits)
* 0x0c, VanaRegu
*/
REG_INIT(AB8500_VPLLVANAREGU, 0x04, 0x06, 0x0f),
/*
* 0x01, VrefDDREna
* 0x02, VrefDDRSleepMode
*/
REG_INIT(AB8500_VREFDDR, 0x04, 0x07, 0x03),
/*
* 0x03, VextSupply1Regu
* 0x0c, VextSupply2Regu
* 0x30, VextSupply3Regu
* 0x40, ExtSupply2Bypass
* 0x80, ExtSupply3Bypass
*/
REG_INIT(AB8500_EXTSUPPLYREGU, 0x04, 0x08, 0xff),
/*
* 0x03, Vaux1Regu
* 0x0c, Vaux2Regu
*/
REG_INIT(AB8500_VAUX12REGU, 0x04, 0x09, 0x0f),
/*
* 0x03, Vaux3Regu
*/
REG_INIT(AB8500_VRF1VAUX3REGU, 0x04, 0x0a, 0x03),
/*
* 0x0f, Vaux1Sel
*/
REG_INIT(AB8500_VAUX1SEL, 0x04, 0x1f, 0x0f),
/*
* 0x0f, Vaux2Sel
*/
REG_INIT(AB8500_VAUX2SEL, 0x04, 0x20, 0x0f),
/*
* 0x07, Vaux3Sel
*/
REG_INIT(AB8500_VRF1VAUX3SEL, 0x04, 0x21, 0x07),
/*
* 0x01, VextSupply12LP
*/
REG_INIT(AB8500_REGUCTRL2SPARE, 0x04, 0x22, 0x01),
/*
* 0x04, Vaux1Disch
* 0x08, Vaux2Disch
* 0x10, Vaux3Disch
* 0x20, Vintcore12Disch
* 0x40, VTVoutDisch
* 0x80, VaudioDisch
*/
REG_INIT(AB8500_REGUCTRLDISCH, 0x04, 0x43, 0xfc),
/*
* 0x02, VanaDisch
* 0x04, VdmicPullDownEna
* 0x10, VdmicDisch
*/
REG_INIT(AB8500_REGUCTRLDISCH2, 0x04, 0x44, 0x16),
};
/* AB8505 register init */
static struct ab8500_reg_init ab8505_reg_init[] = {
/*
* 0x03, VarmRequestCtrl
* 0x0c, VsmpsCRequestCtrl
* 0x30, VsmpsARequestCtrl
* 0xc0, VsmpsBRequestCtrl
*/
REG_INIT(AB8505_REGUREQUESTCTRL1, 0x03, 0x03, 0xff),
/*
* 0x03, VsafeRequestCtrl
* 0x0c, VpllRequestCtrl
* 0x30, VanaRequestCtrl
*/
REG_INIT(AB8505_REGUREQUESTCTRL2, 0x03, 0x04, 0x3f),
/*
* 0x30, Vaux1RequestCtrl
* 0xc0, Vaux2RequestCtrl
*/
REG_INIT(AB8505_REGUREQUESTCTRL3, 0x03, 0x05, 0xf0),
/*
* 0x03, Vaux3RequestCtrl
* 0x04, SwHPReq
*/
REG_INIT(AB8505_REGUREQUESTCTRL4, 0x03, 0x06, 0x07),
/*
* 0x01, VsmpsASysClkReq1HPValid
* 0x02, VsmpsBSysClkReq1HPValid
* 0x04, VsafeSysClkReq1HPValid
* 0x08, VanaSysClkReq1HPValid
* 0x10, VpllSysClkReq1HPValid
* 0x20, Vaux1SysClkReq1HPValid
* 0x40, Vaux2SysClkReq1HPValid
* 0x80, Vaux3SysClkReq1HPValid
*/
REG_INIT(AB8505_REGUSYSCLKREQ1HPVALID1, 0x03, 0x07, 0xff),
/*
* 0x01, VsmpsCSysClkReq1HPValid
* 0x02, VarmSysClkReq1HPValid
* 0x04, VbbSysClkReq1HPValid
* 0x08, VsmpsMSysClkReq1HPValid
*/
REG_INIT(AB8505_REGUSYSCLKREQ1HPVALID2, 0x03, 0x08, 0x0f),
/*
* 0x01, VsmpsAHwHPReq1Valid
* 0x02, VsmpsBHwHPReq1Valid
* 0x04, VsafeHwHPReq1Valid
* 0x08, VanaHwHPReq1Valid
* 0x10, VpllHwHPReq1Valid
* 0x20, Vaux1HwHPReq1Valid
* 0x40, Vaux2HwHPReq1Valid
* 0x80, Vaux3HwHPReq1Valid
*/
REG_INIT(AB8505_REGUHWHPREQ1VALID1, 0x03, 0x09, 0xff),
/*
* 0x08, VsmpsMHwHPReq1Valid
*/
REG_INIT(AB8505_REGUHWHPREQ1VALID2, 0x03, 0x0a, 0x08),
/*
* 0x01, VsmpsAHwHPReq2Valid
* 0x02, VsmpsBHwHPReq2Valid
* 0x04, VsafeHwHPReq2Valid
* 0x08, VanaHwHPReq2Valid
* 0x10, VpllHwHPReq2Valid
* 0x20, Vaux1HwHPReq2Valid
* 0x40, Vaux2HwHPReq2Valid
* 0x80, Vaux3HwHPReq2Valid
*/
REG_INIT(AB8505_REGUHWHPREQ2VALID1, 0x03, 0x0b, 0xff),
/*
* 0x08, VsmpsMHwHPReq2Valid
*/
REG_INIT(AB8505_REGUHWHPREQ2VALID2, 0x03, 0x0c, 0x08),
/*
* 0x01, VsmpsCSwHPReqValid
* 0x02, VarmSwHPReqValid
* 0x04, VsmpsASwHPReqValid
* 0x08, VsmpsBSwHPReqValid
* 0x10, VsafeSwHPReqValid
* 0x20, VanaSwHPReqValid
* 0x40, VpllSwHPReqValid
* 0x80, Vaux1SwHPReqValid
*/
REG_INIT(AB8505_REGUSWHPREQVALID1, 0x03, 0x0d, 0xff),
/*
* 0x01, Vaux2SwHPReqValid
* 0x02, Vaux3SwHPReqValid
* 0x20, VsmpsMSwHPReqValid
*/
REG_INIT(AB8505_REGUSWHPREQVALID2, 0x03, 0x0e, 0x23),
/*
* 0x02, SysClkReq2Valid1
* 0x04, SysClkReq3Valid1
* 0x08, SysClkReq4Valid1
*/
REG_INIT(AB8505_REGUSYSCLKREQVALID1, 0x03, 0x0f, 0x0e),
/*
* 0x02, SysClkReq2Valid2
* 0x04, SysClkReq3Valid2
* 0x08, SysClkReq4Valid2
*/
REG_INIT(AB8505_REGUSYSCLKREQVALID2, 0x03, 0x10, 0x0e),
/*
* 0x01, Vaux4SwHPReqValid
* 0x02, Vaux4HwHPReq2Valid
* 0x04, Vaux4HwHPReq1Valid
* 0x08, Vaux4SysClkReq1HPValid
*/
REG_INIT(AB8505_REGUVAUX4REQVALID, 0x03, 0x11, 0x0f),
/*
* 0x02, VadcEna
* 0x04, VintCore12Ena
* 0x38, VintCore12Sel
* 0x40, VintCore12LP
* 0x80, VadcLP
*/
REG_INIT(AB8505_REGUMISC1, 0x03, 0x80, 0xfe),
/*
* 0x02, VaudioEna
* 0x04, VdmicEna
* 0x08, Vamic1Ena
* 0x10, Vamic2Ena
*/
REG_INIT(AB8505_VAUDIOSUPPLY, 0x03, 0x83, 0x1e),
/*
* 0x01, Vamic1_dzout
* 0x02, Vamic2_dzout
*/
REG_INIT(AB8505_REGUCTRL1VAMIC, 0x03, 0x84, 0x03),
/*
* 0x03, VsmpsARegu
* 0x0c, VsmpsASelCtrl
* 0x10, VsmpsAAutoMode
* 0x20, VsmpsAPWMMode
*/
REG_INIT(AB8505_VSMPSAREGU, 0x04, 0x03, 0x3f),
/*
* 0x03, VsmpsBRegu
* 0x0c, VsmpsBSelCtrl
* 0x10, VsmpsBAutoMode
* 0x20, VsmpsBPWMMode
*/
REG_INIT(AB8505_VSMPSBREGU, 0x04, 0x04, 0x3f),
/*
* 0x03, VsafeRegu
* 0x0c, VsafeSelCtrl
* 0x10, VsafeAutoMode
* 0x20, VsafePWMMode
*/
REG_INIT(AB8505_VSAFEREGU, 0x04, 0x05, 0x3f),
/*
* 0x03, VpllRegu (NOTE! PRCMU register bits)
* 0x0c, VanaRegu
*/
REG_INIT(AB8505_VPLLVANAREGU, 0x04, 0x06, 0x0f),
/*
* 0x03, VextSupply1Regu
* 0x0c, VextSupply2Regu
* 0x30, VextSupply3Regu
* 0x40, ExtSupply2Bypass
* 0x80, ExtSupply3Bypass
*/
REG_INIT(AB8505_EXTSUPPLYREGU, 0x04, 0x08, 0xff),
/*
* 0x03, Vaux1Regu
* 0x0c, Vaux2Regu
*/
REG_INIT(AB8505_VAUX12REGU, 0x04, 0x09, 0x0f),
/*
* 0x0f, Vaux3Regu
*/
REG_INIT(AB8505_VRF1VAUX3REGU, 0x04, 0x0a, 0x0f),
/*
* 0x3f, VsmpsASel1
*/
REG_INIT(AB8505_VSMPSASEL1, 0x04, 0x13, 0x3f),
/*
* 0x3f, VsmpsASel2
*/
REG_INIT(AB8505_VSMPSASEL2, 0x04, 0x14, 0x3f),
/*
* 0x3f, VsmpsASel3
*/
REG_INIT(AB8505_VSMPSASEL3, 0x04, 0x15, 0x3f),
/*
* 0x3f, VsmpsBSel1
*/
REG_INIT(AB8505_VSMPSBSEL1, 0x04, 0x17, 0x3f),
/*
* 0x3f, VsmpsBSel2
*/
REG_INIT(AB8505_VSMPSBSEL2, 0x04, 0x18, 0x3f),
/*
* 0x3f, VsmpsBSel3
*/
REG_INIT(AB8505_VSMPSBSEL3, 0x04, 0x19, 0x3f),
/*
* 0x7f, VsafeSel1
*/
REG_INIT(AB8505_VSAFESEL1, 0x04, 0x1b, 0x7f),
/*
* 0x3f, VsafeSel2
*/
REG_INIT(AB8505_VSAFESEL2, 0x04, 0x1c, 0x7f),
/*
* 0x3f, VsafeSel3
*/
REG_INIT(AB8505_VSAFESEL3, 0x04, 0x1d, 0x7f),
/*
* 0x0f, Vaux1Sel
*/
REG_INIT(AB8505_VAUX1SEL, 0x04, 0x1f, 0x0f),
/*
* 0x0f, Vaux2Sel
*/
REG_INIT(AB8505_VAUX2SEL, 0x04, 0x20, 0x0f),
/*
* 0x07, Vaux3Sel
* 0x30, VRF1Sel
*/
REG_INIT(AB8505_VRF1VAUX3SEL, 0x04, 0x21, 0x37),
/*
* 0x03, Vaux4RequestCtrl
*/
REG_INIT(AB8505_VAUX4REQCTRL, 0x04, 0x2d, 0x03),
/*
* 0x03, Vaux4Regu
*/
REG_INIT(AB8505_VAUX4REGU, 0x04, 0x2e, 0x03),
/*
* 0x0f, Vaux4Sel
*/
REG_INIT(AB8505_VAUX4SEL, 0x04, 0x2f, 0x0f),
/*
* 0x04, Vaux1Disch
* 0x08, Vaux2Disch
* 0x10, Vaux3Disch
* 0x20, Vintcore12Disch
* 0x40, VTVoutDisch
* 0x80, VaudioDisch
*/
REG_INIT(AB8505_REGUCTRLDISCH, 0x04, 0x43, 0xfc),
/*
* 0x02, VanaDisch
* 0x04, VdmicPullDownEna
* 0x10, VdmicDisch
*/
REG_INIT(AB8505_REGUCTRLDISCH2, 0x04, 0x44, 0x16),
/*
* 0x01, Vaux4Disch
*/
REG_INIT(AB8505_REGUCTRLDISCH3, 0x04, 0x48, 0x01),
/*
* 0x07, Vaux5Sel
* 0x08, Vaux5LP
* 0x10, Vaux5Ena
* 0x20, Vaux5Disch
* 0x40, Vaux5DisSfst
* 0x80, Vaux5DisPulld
*/
REG_INIT(AB8505_CTRLVAUX5, 0x01, 0x55, 0xff),
/*
* 0x07, Vaux6Sel
* 0x08, Vaux6LP
* 0x10, Vaux6Ena
* 0x80, Vaux6DisPulld
*/
REG_INIT(AB8505_CTRLVAUX6, 0x01, 0x56, 0x9f),
};
static struct of_regulator_match ab8500_regulator_match[] = {
{ .name = "ab8500_ldo_aux1", .driver_data = (void *) AB8500_LDO_AUX1, },
{ .name = "ab8500_ldo_aux2", .driver_data = (void *) AB8500_LDO_AUX2, },
{ .name = "ab8500_ldo_aux3", .driver_data = (void *) AB8500_LDO_AUX3, },
{ .name = "ab8500_ldo_intcore", .driver_data = (void *) AB8500_LDO_INTCORE, },
{ .name = "ab8500_ldo_tvout", .driver_data = (void *) AB8500_LDO_TVOUT, },
{ .name = "ab8500_ldo_audio", .driver_data = (void *) AB8500_LDO_AUDIO, },
{ .name = "ab8500_ldo_anamic1", .driver_data = (void *) AB8500_LDO_ANAMIC1, },
{ .name = "ab8500_ldo_anamic2", .driver_data = (void *) AB8500_LDO_ANAMIC2, },
{ .name = "ab8500_ldo_dmic", .driver_data = (void *) AB8500_LDO_DMIC, },
{ .name = "ab8500_ldo_ana", .driver_data = (void *) AB8500_LDO_ANA, },
};
static struct of_regulator_match ab8505_regulator_match[] = {
{ .name = "ab8500_ldo_aux1", .driver_data = (void *) AB8505_LDO_AUX1, },
{ .name = "ab8500_ldo_aux2", .driver_data = (void *) AB8505_LDO_AUX2, },
{ .name = "ab8500_ldo_aux3", .driver_data = (void *) AB8505_LDO_AUX3, },
{ .name = "ab8500_ldo_aux4", .driver_data = (void *) AB8505_LDO_AUX4, },
{ .name = "ab8500_ldo_aux5", .driver_data = (void *) AB8505_LDO_AUX5, },
{ .name = "ab8500_ldo_aux6", .driver_data = (void *) AB8505_LDO_AUX6, },
{ .name = "ab8500_ldo_intcore", .driver_data = (void *) AB8505_LDO_INTCORE, },
{ .name = "ab8500_ldo_adc", .driver_data = (void *) AB8505_LDO_ADC, },
{ .name = "ab8500_ldo_audio", .driver_data = (void *) AB8505_LDO_AUDIO, },
{ .name = "ab8500_ldo_anamic1", .driver_data = (void *) AB8505_LDO_ANAMIC1, },
{ .name = "ab8500_ldo_anamic2", .driver_data = (void *) AB8505_LDO_ANAMIC2, },
{ .name = "ab8500_ldo_aux8", .driver_data = (void *) AB8505_LDO_AUX8, },
{ .name = "ab8500_ldo_ana", .driver_data = (void *) AB8505_LDO_ANA, },
};
static struct {
struct ab8500_regulator_info *info;
int info_size;
struct ab8500_reg_init *init;
int init_size;
struct of_regulator_match *match;
int match_size;
} abx500_regulator;
static void abx500_get_regulator_info(struct ab8500 *ab8500)
{
if (is_ab8505(ab8500)) {
abx500_regulator.info = ab8505_regulator_info;
abx500_regulator.info_size = ARRAY_SIZE(ab8505_regulator_info);
abx500_regulator.init = ab8505_reg_init;
abx500_regulator.init_size = AB8505_NUM_REGULATOR_REGISTERS;
abx500_regulator.match = ab8505_regulator_match;
abx500_regulator.match_size = ARRAY_SIZE(ab8505_regulator_match);
} else {
abx500_regulator.info = ab8500_regulator_info;
abx500_regulator.info_size = ARRAY_SIZE(ab8500_regulator_info);
abx500_regulator.init = ab8500_reg_init;
abx500_regulator.init_size = AB8500_NUM_REGULATOR_REGISTERS;
abx500_regulator.match = ab8500_regulator_match;
abx500_regulator.match_size = ARRAY_SIZE(ab8500_regulator_match);
}
}
static int ab8500_regulator_register(struct platform_device *pdev,
struct regulator_init_data *init_data,
int id, struct device_node *np)
{
struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
struct ab8500_regulator_info *info = NULL;
struct regulator_config config = { };
struct regulator_dev *rdev;
/* assign per-regulator data */
info = &abx500_regulator.info[id];
info->dev = &pdev->dev;
config.dev = &pdev->dev;
config.init_data = init_data;
config.driver_data = info;
config.of_node = np;
/* fix for hardware before ab8500v2.0 */
if (is_ab8500_1p1_or_earlier(ab8500)) {
if (info->desc.id == AB8500_LDO_AUX3) {
info->desc.n_voltages =
ARRAY_SIZE(ldo_vauxn_voltages);
info->desc.volt_table = ldo_vauxn_voltages;
info->voltage_mask = 0xf;
}
}
/* register regulator with framework */
rdev = devm_regulator_register(&pdev->dev, &info->desc, &config);
if (IS_ERR(rdev)) {
dev_err(&pdev->dev, "failed to register regulator %s\n",
info->desc.name);
return PTR_ERR(rdev);
}
return 0;
}
static int ab8500_regulator_probe(struct platform_device *pdev)
{
struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
struct device_node *np = pdev->dev.of_node;
struct of_regulator_match *match;
int err, i;
if (!ab8500) {
dev_err(&pdev->dev, "null mfd parent\n");
return -EINVAL;
}
abx500_get_regulator_info(ab8500);
err = of_regulator_match(&pdev->dev, np,
abx500_regulator.match,
abx500_regulator.match_size);
if (err < 0) {
dev_err(&pdev->dev,
"Error parsing regulator init data: %d\n", err);
return err;
}
match = abx500_regulator.match;
for (i = 0; i < abx500_regulator.info_size; i++) {
err = ab8500_regulator_register(pdev, match[i].init_data, i,
match[i].of_node);
if (err)
return err;
}
return 0;
}
static struct platform_driver ab8500_regulator_driver = {
.probe = ab8500_regulator_probe,
.driver = {
.name = "ab8500-regulator",
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
},
};
static int __init ab8500_regulator_init(void)
{
int ret;
ret = platform_driver_register(&ab8500_regulator_driver);
if (ret != 0)
pr_err("Failed to register ab8500 regulator: %d\n", ret);
return ret;
}
subsys_initcall(ab8500_regulator_init);
static void __exit ab8500_regulator_exit(void)
{
platform_driver_unregister(&ab8500_regulator_driver);
}
module_exit(ab8500_regulator_exit);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Sundar Iyer <sundar.iyer@stericsson.com>");
MODULE_AUTHOR("Bengt Jonsson <bengt.g.jonsson@stericsson.com>");
MODULE_AUTHOR("Daniel Willerud <daniel.willerud@stericsson.com>");
MODULE_DESCRIPTION("Regulator Driver for ST-Ericsson AB8500 Mixed-Sig PMIC");
MODULE_ALIAS("platform:ab8500-regulator");