1
linux/drivers/irqchip/irq-riscv-aplic-main.c
Sunil V L 5122e380c2 irqchip/riscv-aplic: Add ACPI support
Add ACPI support in APLIC drivers. Use the mapping created early during
boot to get the details about the APLIC.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20240812005929.113499-17-sunilvl@ventanamicro.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-08-27 15:48:36 +02:00

234 lines
5.8 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2021 Western Digital Corporation or its affiliates.
* Copyright (C) 2022 Ventana Micro Systems Inc.
*/
#include <linux/acpi.h>
#include <linux/bitfield.h>
#include <linux/irqchip/riscv-aplic.h>
#include <linux/irqchip/riscv-imsic.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/platform_device.h>
#include <linux/printk.h>
#include "irq-riscv-aplic-main.h"
void aplic_irq_unmask(struct irq_data *d)
{
struct aplic_priv *priv = irq_data_get_irq_chip_data(d);
writel(d->hwirq, priv->regs + APLIC_SETIENUM);
}
void aplic_irq_mask(struct irq_data *d)
{
struct aplic_priv *priv = irq_data_get_irq_chip_data(d);
writel(d->hwirq, priv->regs + APLIC_CLRIENUM);
}
int aplic_irq_set_type(struct irq_data *d, unsigned int type)
{
struct aplic_priv *priv = irq_data_get_irq_chip_data(d);
void __iomem *sourcecfg;
u32 val = 0;
switch (type) {
case IRQ_TYPE_NONE:
val = APLIC_SOURCECFG_SM_INACTIVE;
break;
case IRQ_TYPE_LEVEL_LOW:
val = APLIC_SOURCECFG_SM_LEVEL_LOW;
break;
case IRQ_TYPE_LEVEL_HIGH:
val = APLIC_SOURCECFG_SM_LEVEL_HIGH;
break;
case IRQ_TYPE_EDGE_FALLING:
val = APLIC_SOURCECFG_SM_EDGE_FALL;
break;
case IRQ_TYPE_EDGE_RISING:
val = APLIC_SOURCECFG_SM_EDGE_RISE;
break;
default:
return -EINVAL;
}
sourcecfg = priv->regs + APLIC_SOURCECFG_BASE;
sourcecfg += (d->hwirq - 1) * sizeof(u32);
writel(val, sourcecfg);
return 0;
}
int aplic_irqdomain_translate(struct irq_fwspec *fwspec, u32 gsi_base,
unsigned long *hwirq, unsigned int *type)
{
if (WARN_ON(fwspec->param_count < 2))
return -EINVAL;
if (WARN_ON(!fwspec->param[0]))
return -EINVAL;
/* For DT, gsi_base is always zero. */
*hwirq = fwspec->param[0] - gsi_base;
*type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK;
WARN_ON(*type == IRQ_TYPE_NONE);
return 0;
}
void aplic_init_hw_global(struct aplic_priv *priv, bool msi_mode)
{
u32 val;
#ifdef CONFIG_RISCV_M_MODE
u32 valh;
if (msi_mode) {
val = lower_32_bits(priv->msicfg.base_ppn);
valh = FIELD_PREP(APLIC_xMSICFGADDRH_BAPPN, upper_32_bits(priv->msicfg.base_ppn));
valh |= FIELD_PREP(APLIC_xMSICFGADDRH_LHXW, priv->msicfg.lhxw);
valh |= FIELD_PREP(APLIC_xMSICFGADDRH_HHXW, priv->msicfg.hhxw);
valh |= FIELD_PREP(APLIC_xMSICFGADDRH_LHXS, priv->msicfg.lhxs);
valh |= FIELD_PREP(APLIC_xMSICFGADDRH_HHXS, priv->msicfg.hhxs);
writel(val, priv->regs + APLIC_xMSICFGADDR);
writel(valh, priv->regs + APLIC_xMSICFGADDRH);
}
#endif
/* Setup APLIC domaincfg register */
val = readl(priv->regs + APLIC_DOMAINCFG);
val |= APLIC_DOMAINCFG_IE;
if (msi_mode)
val |= APLIC_DOMAINCFG_DM;
writel(val, priv->regs + APLIC_DOMAINCFG);
if (readl(priv->regs + APLIC_DOMAINCFG) != val)
dev_warn(priv->dev, "unable to write 0x%x in domaincfg\n", val);
}
static void aplic_init_hw_irqs(struct aplic_priv *priv)
{
int i;
/* Disable all interrupts */
for (i = 0; i <= priv->nr_irqs; i += 32)
writel(-1U, priv->regs + APLIC_CLRIE_BASE + (i / 32) * sizeof(u32));
/* Set interrupt type and default priority for all interrupts */
for (i = 1; i <= priv->nr_irqs; i++) {
writel(0, priv->regs + APLIC_SOURCECFG_BASE + (i - 1) * sizeof(u32));
writel(APLIC_DEFAULT_PRIORITY,
priv->regs + APLIC_TARGET_BASE + (i - 1) * sizeof(u32));
}
/* Clear APLIC domaincfg */
writel(0, priv->regs + APLIC_DOMAINCFG);
}
#ifdef CONFIG_ACPI
static const struct acpi_device_id aplic_acpi_match[] = {
{ "RSCV0002", 0 },
{}
};
MODULE_DEVICE_TABLE(acpi, aplic_acpi_match);
#endif
int aplic_setup_priv(struct aplic_priv *priv, struct device *dev, void __iomem *regs)
{
struct device_node *np = to_of_node(dev->fwnode);
struct of_phandle_args parent;
int rc;
/* Save device pointer and register base */
priv->dev = dev;
priv->regs = regs;
if (np) {
/* Find out number of interrupt sources */
rc = of_property_read_u32(np, "riscv,num-sources", &priv->nr_irqs);
if (rc) {
dev_err(dev, "failed to get number of interrupt sources\n");
return rc;
}
/*
* Find out number of IDCs based on parent interrupts
*
* If "msi-parent" property is present then we ignore the
* APLIC IDCs which forces the APLIC driver to use MSI mode.
*/
if (!of_property_present(np, "msi-parent")) {
while (!of_irq_parse_one(np, priv->nr_idcs, &parent))
priv->nr_idcs++;
}
} else {
rc = riscv_acpi_get_gsi_info(dev->fwnode, &priv->gsi_base, &priv->acpi_aplic_id,
&priv->nr_irqs, &priv->nr_idcs);
if (rc) {
dev_err(dev, "failed to find GSI mapping\n");
return rc;
}
}
/* Setup initial state APLIC interrupts */
aplic_init_hw_irqs(priv);
return 0;
}
static int aplic_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
bool msi_mode = false;
void __iomem *regs;
int rc;
/* Map the MMIO registers */
regs = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(regs)) {
dev_err(dev, "failed map MMIO registers\n");
return PTR_ERR(regs);
}
/*
* If msi-parent property is present then setup APLIC MSI
* mode otherwise setup APLIC direct mode.
*/
if (is_of_node(dev->fwnode))
msi_mode = of_property_present(to_of_node(dev->fwnode), "msi-parent");
else
msi_mode = imsic_acpi_get_fwnode(NULL) ? 1 : 0;
if (msi_mode)
rc = aplic_msi_setup(dev, regs);
else
rc = aplic_direct_setup(dev, regs);
if (rc)
dev_err(dev, "failed to setup APLIC in %s mode\n", msi_mode ? "MSI" : "direct");
#ifdef CONFIG_ACPI
if (!acpi_disabled)
acpi_dev_clear_dependencies(ACPI_COMPANION(dev));
#endif
return rc;
}
static const struct of_device_id aplic_match[] = {
{ .compatible = "riscv,aplic" },
{}
};
static struct platform_driver aplic_driver = {
.driver = {
.name = "riscv-aplic",
.of_match_table = aplic_match,
.acpi_match_table = ACPI_PTR(aplic_acpi_match),
},
.probe = aplic_probe,
};
builtin_platform_driver(aplic_driver);