2546fffd91
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20231004131254.2673842-4-u.kleine-koenig@pengutronix.de
398 lines
9.9 KiB
C
398 lines
9.9 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2018, 2019 Cisco Systems
|
|
*/
|
|
|
|
#include <linux/edac.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/stop_machine.h>
|
|
#include <linux/io.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/regmap.h>
|
|
#include "edac_module.h"
|
|
|
|
|
|
#define DRV_NAME "aspeed-edac"
|
|
|
|
|
|
#define ASPEED_MCR_PROT 0x00 /* protection key register */
|
|
#define ASPEED_MCR_CONF 0x04 /* configuration register */
|
|
#define ASPEED_MCR_INTR_CTRL 0x50 /* interrupt control/status register */
|
|
#define ASPEED_MCR_ADDR_UNREC 0x58 /* address of first un-recoverable error */
|
|
#define ASPEED_MCR_ADDR_REC 0x5c /* address of last recoverable error */
|
|
#define ASPEED_MCR_LAST ASPEED_MCR_ADDR_REC
|
|
|
|
|
|
#define ASPEED_MCR_PROT_PASSWD 0xfc600309
|
|
#define ASPEED_MCR_CONF_DRAM_TYPE BIT(4)
|
|
#define ASPEED_MCR_CONF_ECC BIT(7)
|
|
#define ASPEED_MCR_INTR_CTRL_CLEAR BIT(31)
|
|
#define ASPEED_MCR_INTR_CTRL_CNT_REC GENMASK(23, 16)
|
|
#define ASPEED_MCR_INTR_CTRL_CNT_UNREC GENMASK(15, 12)
|
|
#define ASPEED_MCR_INTR_CTRL_ENABLE (BIT(0) | BIT(1))
|
|
|
|
|
|
static struct regmap *aspeed_regmap;
|
|
|
|
|
|
static int regmap_reg_write(void *context, unsigned int reg, unsigned int val)
|
|
{
|
|
void __iomem *regs = (void __iomem *)context;
|
|
|
|
/* enable write to MCR register set */
|
|
writel(ASPEED_MCR_PROT_PASSWD, regs + ASPEED_MCR_PROT);
|
|
|
|
writel(val, regs + reg);
|
|
|
|
/* disable write to MCR register set */
|
|
writel(~ASPEED_MCR_PROT_PASSWD, regs + ASPEED_MCR_PROT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int regmap_reg_read(void *context, unsigned int reg, unsigned int *val)
|
|
{
|
|
void __iomem *regs = (void __iomem *)context;
|
|
|
|
*val = readl(regs + reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static bool regmap_is_volatile(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case ASPEED_MCR_PROT:
|
|
case ASPEED_MCR_INTR_CTRL:
|
|
case ASPEED_MCR_ADDR_UNREC:
|
|
case ASPEED_MCR_ADDR_REC:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
|
|
static const struct regmap_config aspeed_regmap_config = {
|
|
.reg_bits = 32,
|
|
.val_bits = 32,
|
|
.reg_stride = 4,
|
|
.max_register = ASPEED_MCR_LAST,
|
|
.reg_write = regmap_reg_write,
|
|
.reg_read = regmap_reg_read,
|
|
.volatile_reg = regmap_is_volatile,
|
|
.fast_io = true,
|
|
};
|
|
|
|
|
|
static void count_rec(struct mem_ctl_info *mci, u8 rec_cnt, u32 rec_addr)
|
|
{
|
|
struct csrow_info *csrow = mci->csrows[0];
|
|
u32 page, offset, syndrome;
|
|
|
|
if (!rec_cnt)
|
|
return;
|
|
|
|
/* report first few errors (if there are) */
|
|
/* note: no addresses are recorded */
|
|
if (rec_cnt > 1) {
|
|
/* page, offset and syndrome are not available */
|
|
page = 0;
|
|
offset = 0;
|
|
syndrome = 0;
|
|
edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, rec_cnt-1,
|
|
page, offset, syndrome, 0, 0, -1,
|
|
"address(es) not available", "");
|
|
}
|
|
|
|
/* report last error */
|
|
/* note: rec_addr is the last recoverable error addr */
|
|
page = rec_addr >> PAGE_SHIFT;
|
|
offset = rec_addr & ~PAGE_MASK;
|
|
/* syndrome is not available */
|
|
syndrome = 0;
|
|
edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
|
|
csrow->first_page + page, offset, syndrome,
|
|
0, 0, -1, "", "");
|
|
}
|
|
|
|
|
|
static void count_un_rec(struct mem_ctl_info *mci, u8 un_rec_cnt,
|
|
u32 un_rec_addr)
|
|
{
|
|
struct csrow_info *csrow = mci->csrows[0];
|
|
u32 page, offset, syndrome;
|
|
|
|
if (!un_rec_cnt)
|
|
return;
|
|
|
|
/* report 1. error */
|
|
/* note: un_rec_addr is the first unrecoverable error addr */
|
|
page = un_rec_addr >> PAGE_SHIFT;
|
|
offset = un_rec_addr & ~PAGE_MASK;
|
|
/* syndrome is not available */
|
|
syndrome = 0;
|
|
edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
|
|
csrow->first_page + page, offset, syndrome,
|
|
0, 0, -1, "", "");
|
|
|
|
/* report further errors (if there are) */
|
|
/* note: no addresses are recorded */
|
|
if (un_rec_cnt > 1) {
|
|
/* page, offset and syndrome are not available */
|
|
page = 0;
|
|
offset = 0;
|
|
syndrome = 0;
|
|
edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, un_rec_cnt-1,
|
|
page, offset, syndrome, 0, 0, -1,
|
|
"address(es) not available", "");
|
|
}
|
|
}
|
|
|
|
|
|
static irqreturn_t mcr_isr(int irq, void *arg)
|
|
{
|
|
struct mem_ctl_info *mci = arg;
|
|
u32 rec_addr, un_rec_addr;
|
|
u32 reg50, reg5c, reg58;
|
|
u8 rec_cnt, un_rec_cnt;
|
|
|
|
regmap_read(aspeed_regmap, ASPEED_MCR_INTR_CTRL, ®50);
|
|
dev_dbg(mci->pdev, "received edac interrupt w/ mcr register 50: 0x%x\n",
|
|
reg50);
|
|
|
|
/* collect data about recoverable and unrecoverable errors */
|
|
rec_cnt = (reg50 & ASPEED_MCR_INTR_CTRL_CNT_REC) >> 16;
|
|
un_rec_cnt = (reg50 & ASPEED_MCR_INTR_CTRL_CNT_UNREC) >> 12;
|
|
|
|
dev_dbg(mci->pdev, "%d recoverable interrupts and %d unrecoverable interrupts\n",
|
|
rec_cnt, un_rec_cnt);
|
|
|
|
regmap_read(aspeed_regmap, ASPEED_MCR_ADDR_UNREC, ®58);
|
|
un_rec_addr = reg58;
|
|
|
|
regmap_read(aspeed_regmap, ASPEED_MCR_ADDR_REC, ®5c);
|
|
rec_addr = reg5c;
|
|
|
|
/* clear interrupt flags and error counters: */
|
|
regmap_update_bits(aspeed_regmap, ASPEED_MCR_INTR_CTRL,
|
|
ASPEED_MCR_INTR_CTRL_CLEAR,
|
|
ASPEED_MCR_INTR_CTRL_CLEAR);
|
|
|
|
regmap_update_bits(aspeed_regmap, ASPEED_MCR_INTR_CTRL,
|
|
ASPEED_MCR_INTR_CTRL_CLEAR, 0);
|
|
|
|
/* process recoverable and unrecoverable errors */
|
|
count_rec(mci, rec_cnt, rec_addr);
|
|
count_un_rec(mci, un_rec_cnt, un_rec_addr);
|
|
|
|
if (!rec_cnt && !un_rec_cnt)
|
|
dev_dbg(mci->pdev, "received edac interrupt, but did not find any ECC counters\n");
|
|
|
|
regmap_read(aspeed_regmap, ASPEED_MCR_INTR_CTRL, ®50);
|
|
dev_dbg(mci->pdev, "edac interrupt handled. mcr reg 50 is now: 0x%x\n",
|
|
reg50);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
|
|
static int config_irq(void *ctx, struct platform_device *pdev)
|
|
{
|
|
int irq;
|
|
int rc;
|
|
|
|
/* register interrupt handler */
|
|
irq = platform_get_irq(pdev, 0);
|
|
dev_dbg(&pdev->dev, "got irq %d\n", irq);
|
|
if (irq < 0)
|
|
return irq;
|
|
|
|
rc = devm_request_irq(&pdev->dev, irq, mcr_isr, IRQF_TRIGGER_HIGH,
|
|
DRV_NAME, ctx);
|
|
if (rc) {
|
|
dev_err(&pdev->dev, "unable to request irq %d\n", irq);
|
|
return rc;
|
|
}
|
|
|
|
/* enable interrupts */
|
|
regmap_update_bits(aspeed_regmap, ASPEED_MCR_INTR_CTRL,
|
|
ASPEED_MCR_INTR_CTRL_ENABLE,
|
|
ASPEED_MCR_INTR_CTRL_ENABLE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int init_csrows(struct mem_ctl_info *mci)
|
|
{
|
|
struct csrow_info *csrow = mci->csrows[0];
|
|
u32 nr_pages, dram_type;
|
|
struct dimm_info *dimm;
|
|
struct device_node *np;
|
|
struct resource r;
|
|
u32 reg04;
|
|
int rc;
|
|
|
|
/* retrieve info about physical memory from device tree */
|
|
np = of_find_node_by_name(NULL, "memory");
|
|
if (!np) {
|
|
dev_err(mci->pdev, "dt: missing /memory node\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
rc = of_address_to_resource(np, 0, &r);
|
|
|
|
of_node_put(np);
|
|
|
|
if (rc) {
|
|
dev_err(mci->pdev, "dt: failed requesting resource for /memory node\n");
|
|
return rc;
|
|
}
|
|
|
|
dev_dbg(mci->pdev, "dt: /memory node resources: first page %pR, PAGE_SHIFT macro=0x%x\n",
|
|
&r, PAGE_SHIFT);
|
|
|
|
csrow->first_page = r.start >> PAGE_SHIFT;
|
|
nr_pages = resource_size(&r) >> PAGE_SHIFT;
|
|
csrow->last_page = csrow->first_page + nr_pages - 1;
|
|
|
|
regmap_read(aspeed_regmap, ASPEED_MCR_CONF, ®04);
|
|
dram_type = (reg04 & ASPEED_MCR_CONF_DRAM_TYPE) ? MEM_DDR4 : MEM_DDR3;
|
|
|
|
dimm = csrow->channels[0]->dimm;
|
|
dimm->mtype = dram_type;
|
|
dimm->edac_mode = EDAC_SECDED;
|
|
dimm->nr_pages = nr_pages / csrow->nr_channels;
|
|
|
|
dev_dbg(mci->pdev, "initialized dimm with first_page=0x%lx and nr_pages=0x%x\n",
|
|
csrow->first_page, nr_pages);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int aspeed_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct edac_mc_layer layers[2];
|
|
struct mem_ctl_info *mci;
|
|
void __iomem *regs;
|
|
u32 reg04;
|
|
int rc;
|
|
|
|
regs = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(regs))
|
|
return PTR_ERR(regs);
|
|
|
|
aspeed_regmap = devm_regmap_init(dev, NULL, (__force void *)regs,
|
|
&aspeed_regmap_config);
|
|
if (IS_ERR(aspeed_regmap))
|
|
return PTR_ERR(aspeed_regmap);
|
|
|
|
/* bail out if ECC mode is not configured */
|
|
regmap_read(aspeed_regmap, ASPEED_MCR_CONF, ®04);
|
|
if (!(reg04 & ASPEED_MCR_CONF_ECC)) {
|
|
dev_err(&pdev->dev, "ECC mode is not configured in u-boot\n");
|
|
return -EPERM;
|
|
}
|
|
|
|
edac_op_state = EDAC_OPSTATE_INT;
|
|
|
|
/* allocate & init EDAC MC data structure */
|
|
layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
|
|
layers[0].size = 1;
|
|
layers[0].is_virt_csrow = true;
|
|
layers[1].type = EDAC_MC_LAYER_CHANNEL;
|
|
layers[1].size = 1;
|
|
layers[1].is_virt_csrow = false;
|
|
|
|
mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, 0);
|
|
if (!mci)
|
|
return -ENOMEM;
|
|
|
|
mci->pdev = &pdev->dev;
|
|
mci->mtype_cap = MEM_FLAG_DDR3 | MEM_FLAG_DDR4;
|
|
mci->edac_ctl_cap = EDAC_FLAG_SECDED;
|
|
mci->edac_cap = EDAC_FLAG_SECDED;
|
|
mci->scrub_cap = SCRUB_FLAG_HW_SRC;
|
|
mci->scrub_mode = SCRUB_HW_SRC;
|
|
mci->mod_name = DRV_NAME;
|
|
mci->ctl_name = "MIC";
|
|
mci->dev_name = dev_name(&pdev->dev);
|
|
|
|
rc = init_csrows(mci);
|
|
if (rc) {
|
|
dev_err(&pdev->dev, "failed to init csrows\n");
|
|
goto probe_exit02;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, mci);
|
|
|
|
/* register with edac core */
|
|
rc = edac_mc_add_mc(mci);
|
|
if (rc) {
|
|
dev_err(&pdev->dev, "failed to register with EDAC core\n");
|
|
goto probe_exit02;
|
|
}
|
|
|
|
/* register interrupt handler and enable interrupts */
|
|
rc = config_irq(mci, pdev);
|
|
if (rc) {
|
|
dev_err(&pdev->dev, "failed setting up irq\n");
|
|
goto probe_exit01;
|
|
}
|
|
|
|
return 0;
|
|
|
|
probe_exit01:
|
|
edac_mc_del_mc(&pdev->dev);
|
|
probe_exit02:
|
|
edac_mc_free(mci);
|
|
return rc;
|
|
}
|
|
|
|
|
|
static void aspeed_remove(struct platform_device *pdev)
|
|
{
|
|
struct mem_ctl_info *mci;
|
|
|
|
/* disable interrupts */
|
|
regmap_update_bits(aspeed_regmap, ASPEED_MCR_INTR_CTRL,
|
|
ASPEED_MCR_INTR_CTRL_ENABLE, 0);
|
|
|
|
/* free resources */
|
|
mci = edac_mc_del_mc(&pdev->dev);
|
|
if (mci)
|
|
edac_mc_free(mci);
|
|
}
|
|
|
|
|
|
static const struct of_device_id aspeed_of_match[] = {
|
|
{ .compatible = "aspeed,ast2400-sdram-edac" },
|
|
{ .compatible = "aspeed,ast2500-sdram-edac" },
|
|
{ .compatible = "aspeed,ast2600-sdram-edac" },
|
|
{},
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, aspeed_of_match);
|
|
|
|
static struct platform_driver aspeed_driver = {
|
|
.driver = {
|
|
.name = DRV_NAME,
|
|
.of_match_table = aspeed_of_match
|
|
},
|
|
.probe = aspeed_probe,
|
|
.remove_new = aspeed_remove
|
|
};
|
|
module_platform_driver(aspeed_driver);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Stefan Schaeckeler <sschaeck@cisco.com>");
|
|
MODULE_DESCRIPTION("Aspeed BMC SoC EDAC driver");
|
|
MODULE_VERSION("1.0");
|