kevin/linux
1
Fork 0
Code
cb6fcef8b4
linux/arch/x86/Makefile
Matthew Maurer ca627e6365 rust: cfi: add support for CFI_CLANG with Rust 
Make it possible to use the Control Flow Integrity (CFI) sanitizer when
Rust is enabled. Enabling CFI with Rust requires that CFI is configured
to normalize integer types so that all integer types of the same size
and signedness are compatible under CFI.

Rust and C use the same LLVM backend for code generation, so Rust KCFI
is compatible with the KCFI used in the kernel for C. In the case of
FineIBT, CFI also depends on -Zpatchable-function-entry for rewriting
the function prologue, so we set that flag for Rust as well. The flag
for FineIBT requires rustc 1.80.0 or later, so include a Kconfig
requirement for that.

Enabling Rust will select CFI_ICALL_NORMALIZE_INTEGERS because the flag
is required to use Rust with CFI. Using select rather than `depends on`
avoids the case where Rust is not visible in menuconfig due to
CFI_ICALL_NORMALIZE_INTEGERS not being enabled. One disadvantage of
select is that RUST must `depends on` all of the things that
CFI_ICALL_NORMALIZE_INTEGERS depends on to avoid invalid configurations.

Alice has been using KCFI on her phone for several months, so it is
reasonably well tested on arm64.

Signed-off-by: Matthew Maurer <mmaurer@google.com>
Co-developed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Gatlin Newhouse <gatlin.newhouse@gmail.com>
Acked-by: Kees Cook <kees@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240801-kcfi-v2-2-c93caed3d121@google.com
[ Replaced `!FINEIBT` requirement with `!CALL_PADDING` to prevent
  a build error on older Rust compilers. Fixed typo. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-09-16 17:29:58 +02:00

368 lines
12 KiB
Makefile
Raw Blame History

# SPDX-License-Identifier: GPL-2.0
# Unified Makefile for i386 and x86_64
# select defconfig based on actual architecture
ifeq ($(ARCH),x86)
ifeq ($(shell uname -m | sed -e 's/i.86/i386/'),i386)
KBUILD_DEFCONFIG := i386_defconfig
else
KBUILD_DEFCONFIG := x86_64_defconfig
endif
else
KBUILD_DEFCONFIG := $(ARCH)_defconfig
endif
ifdef CONFIG_CC_IS_GCC
RETPOLINE_CFLAGS := $(call cc-option,-mindirect-branch=thunk-extern -mindirect-branch-register)
RETPOLINE_VDSO_CFLAGS := $(call cc-option,-mindirect-branch=thunk-inline -mindirect-branch-register)
endif
ifdef CONFIG_CC_IS_CLANG
RETPOLINE_CFLAGS := -mretpoline-external-thunk
RETPOLINE_VDSO_CFLAGS := -mretpoline
endif
RETPOLINE_CFLAGS += $(call cc-option,-mindirect-branch-cs-prefix)
ifdef CONFIG_MITIGATION_RETHUNK
RETHUNK_CFLAGS := -mfunction-return=thunk-extern
RETHUNK_RUSTFLAGS := -Zfunction-return=thunk-extern
RETPOLINE_CFLAGS += $(RETHUNK_CFLAGS)
RETPOLINE_RUSTFLAGS += $(RETHUNK_RUSTFLAGS)
endif
export RETHUNK_CFLAGS
export RETHUNK_RUSTFLAGS
export RETPOLINE_CFLAGS
export RETPOLINE_RUSTFLAGS
export RETPOLINE_VDSO_CFLAGS
# For gcc stack alignment is specified with -mpreferred-stack-boundary,
# clang has the option -mstack-alignment for that purpose.
ifneq ($(call cc-option, -mpreferred-stack-boundary=4),)
cc_stack_align4 := -mpreferred-stack-boundary=2
cc_stack_align8 := -mpreferred-stack-boundary=3
else ifneq ($(call cc-option, -mstack-alignment=16),)
cc_stack_align4 := -mstack-alignment=4
cc_stack_align8 := -mstack-alignment=8
endif
# How to compile the 16-bit code. Note we always compile for -march=i386;
# that way we can complain to the user if the CPU is insufficient.
REALMODE_CFLAGS := -std=gnu11 -m16 -g -Os -DDISABLE_BRANCH_PROFILING -D__DISABLE_EXPORTS \
-Wall -Wstrict-prototypes -march=i386 -mregparm=3 \
-fno-strict-aliasing -fomit-frame-pointer -fno-pic \
-mno-mmx -mno-sse $(call cc-option,-fcf-protection=none)
REALMODE_CFLAGS += -ffreestanding
REALMODE_CFLAGS += -fno-stack-protector
REALMODE_CFLAGS += -Wno-address-of-packed-member
REALMODE_CFLAGS += $(cc_stack_align4)
REALMODE_CFLAGS += $(CLANG_FLAGS)
ifdef CONFIG_CC_IS_CLANG
REALMODE_CFLAGS += -Wno-gnu
endif
export REALMODE_CFLAGS
# BITS is used as extension for files which are available in a 32 bit
# and a 64 bit version to simplify shared Makefiles.
# e.g.: obj-y += foo_$(BITS).o
export BITS
#
# Prevent GCC from generating any FP code by mistake.
#
# This must happen before we try the -mpreferred-stack-boundary, see:
#
# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=53383
#
KBUILD_CFLAGS += -mno-sse -mno-mmx -mno-sse2 -mno-3dnow -mno-avx
KBUILD_RUSTFLAGS += --target=$(objtree)/scripts/target.json
KBUILD_RUSTFLAGS += -Ctarget-feature=-sse,-sse2,-sse3,-ssse3,-sse4.1,-sse4.2,-avx,-avx2
#
# CFLAGS for compiling floating point code inside the kernel.
#
CC_FLAGS_FPU := -msse -msse2
ifdef CONFIG_CC_IS_GCC
# Stack alignment mismatch, proceed with caution.
# GCC < 7.1 cannot compile code using `double` and -mpreferred-stack-boundary=3
# (8B stack alignment).
# See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=53383
#
# The "-msse" in the first argument is there so that the
# -mpreferred-stack-boundary=3 build error:
#
# -mpreferred-stack-boundary=3 is not between 4 and 12
#
# can be triggered. Otherwise gcc doesn't complain.
CC_FLAGS_FPU += -mhard-float
CC_FLAGS_FPU += $(call cc-option,-msse -mpreferred-stack-boundary=3,-mpreferred-stack-boundary=4)
endif
ifeq ($(CONFIG_X86_KERNEL_IBT),y)
#
# Kernel IBT has S_CET.NOTRACK_EN=0, as such the compilers must not generate
# NOTRACK prefixes. Current generation compilers unconditionally employ NOTRACK
# for jump-tables, as such, disable jump-tables for now.
#
# (jump-tables are implicitly disabled by RETPOLINE)
#
# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=104816
#
KBUILD_CFLAGS += $(call cc-option,-fcf-protection=branch -fno-jump-tables)
KBUILD_RUSTFLAGS += -Zcf-protection=branch -Zno-jump-tables
else
KBUILD_CFLAGS += $(call cc-option,-fcf-protection=none)
endif
ifeq ($(CONFIG_X86_32),y)
BITS := 32
UTS_MACHINE := i386
CHECKFLAGS += -D__i386__
KBUILD_AFLAGS += -m32
KBUILD_CFLAGS += -m32
KBUILD_CFLAGS += -msoft-float -mregparm=3 -freg-struct-return
# Never want PIC in a 32-bit kernel, prevent breakage with GCC built
# with nonstandard options
KBUILD_CFLAGS += -fno-pic
# Align the stack to the register width instead of using the default
# alignment of 16 bytes. This reduces stack usage and the number of
# alignment instructions.
KBUILD_CFLAGS += $(cc_stack_align4)
# CPU-specific tuning. Anything which can be shared with UML should go here.
include $(srctree)/arch/x86/Makefile_32.cpu
KBUILD_CFLAGS += $(cflags-y)
# temporary until string.h is fixed
KBUILD_CFLAGS += -ffreestanding
ifeq ($(CONFIG_STACKPROTECTOR),y)
ifeq ($(CONFIG_SMP),y)
KBUILD_CFLAGS += -mstack-protector-guard-reg=fs -mstack-protector-guard-symbol=__stack_chk_guard
else
KBUILD_CFLAGS += -mstack-protector-guard=global
endif
endif
else
BITS := 64
UTS_MACHINE := x86_64
CHECKFLAGS += -D__x86_64__
KBUILD_AFLAGS += -m64
KBUILD_CFLAGS += -m64
# Align jump targets to 1 byte, not the default 16 bytes:
KBUILD_CFLAGS += $(call cc-option,-falign-jumps=1)
# Pack loops tightly as well:
KBUILD_CFLAGS += $(call cc-option,-falign-loops=1)
# Don't autogenerate traditional x87 instructions
KBUILD_CFLAGS += -mno-80387
KBUILD_CFLAGS += $(call cc-option,-mno-fp-ret-in-387)
# By default gcc and clang use a stack alignment of 16 bytes for x86.
# However the standard kernel entry on x86-64 leaves the stack on an
# 8-byte boundary. If the compiler isn't informed about the actual
# alignment it will generate extra alignment instructions for the
# default alignment which keep the stack *mis*aligned.
# Furthermore an alignment to the register width reduces stack usage
# and the number of alignment instructions.
KBUILD_CFLAGS += $(cc_stack_align8)
# Use -mskip-rax-setup if supported.
KBUILD_CFLAGS += $(call cc-option,-mskip-rax-setup)
# FIXME - should be integrated in Makefile.cpu (Makefile_32.cpu)
cflags-$(CONFIG_MK8) += -march=k8
cflags-$(CONFIG_MPSC) += -march=nocona
cflags-$(CONFIG_MCORE2) += -march=core2
cflags-$(CONFIG_MATOM) += -march=atom
cflags-$(CONFIG_GENERIC_CPU) += -mtune=generic
KBUILD_CFLAGS += $(cflags-y)
rustflags-$(CONFIG_MK8) += -Ctarget-cpu=k8
rustflags-$(CONFIG_MPSC) += -Ctarget-cpu=nocona
rustflags-$(CONFIG_MCORE2) += -Ctarget-cpu=core2
rustflags-$(CONFIG_MATOM) += -Ctarget-cpu=atom
rustflags-$(CONFIG_GENERIC_CPU) += -Ztune-cpu=generic
KBUILD_RUSTFLAGS += $(rustflags-y)
KBUILD_CFLAGS += -mno-red-zone
KBUILD_CFLAGS += -mcmodel=kernel
KBUILD_RUSTFLAGS += -Cno-redzone=y
KBUILD_RUSTFLAGS += -Ccode-model=kernel
endif
#
# If the function graph tracer is used with mcount instead of fentry,
# '-maccumulate-outgoing-args' is needed to prevent a GCC bug
# (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=42109)
#
ifdef CONFIG_FUNCTION_GRAPH_TRACER
ifndef CONFIG_HAVE_FENTRY
ACCUMULATE_OUTGOING_ARGS := 1
endif
endif
ifeq ($(ACCUMULATE_OUTGOING_ARGS), 1)
# This compiler flag is not supported by Clang:
KBUILD_CFLAGS += $(call cc-option,-maccumulate-outgoing-args,)
endif
# Workaround for a gcc prelease that unfortunately was shipped in a suse release
KBUILD_CFLAGS += -Wno-sign-compare
#
KBUILD_CFLAGS += -fno-asynchronous-unwind-tables
# Avoid indirect branches in kernel to deal with Spectre
ifdef CONFIG_MITIGATION_RETPOLINE
KBUILD_CFLAGS += $(RETPOLINE_CFLAGS)
KBUILD_RUSTFLAGS += $(RETPOLINE_RUSTFLAGS)
# Additionally, avoid generating expensive indirect jumps which
# are subject to retpolines for small number of switch cases.
# LLVM turns off jump table generation by default when under
# retpoline builds, however, gcc does not for x86. This has
# only been fixed starting from gcc stable version 8.4.0 and
# onwards, but not for older ones. See gcc bug #86952.
ifndef CONFIG_CC_IS_CLANG
KBUILD_CFLAGS += -fno-jump-tables
endif
endif
ifdef CONFIG_MITIGATION_SLS
KBUILD_CFLAGS += -mharden-sls=all
endif
ifdef CONFIG_CALL_PADDING
PADDING_CFLAGS := -fpatchable-function-entry=$(CONFIG_FUNCTION_PADDING_BYTES),$(CONFIG_FUNCTION_PADDING_BYTES)
KBUILD_CFLAGS += $(PADDING_CFLAGS)
export PADDING_CFLAGS
PADDING_RUSTFLAGS := -Zpatchable-function-entry=$(CONFIG_FUNCTION_PADDING_BYTES),$(CONFIG_FUNCTION_PADDING_BYTES)
KBUILD_RUSTFLAGS += $(PADDING_RUSTFLAGS)
export PADDING_RUSTFLAGS
endif
KBUILD_LDFLAGS += -m elf_$(UTS_MACHINE)
ifdef CONFIG_X86_NEED_RELOCS
LDFLAGS_vmlinux := --emit-relocs --discard-none
else
LDFLAGS_vmlinux :=
endif
#
# The 64-bit kernel must be aligned to 2MB. Pass -z max-page-size=0x200000 to
# the linker to force 2MB page size regardless of the default page size used
# by the linker.
#
ifdef CONFIG_X86_64
LDFLAGS_vmlinux += -z max-page-size=0x200000
endif
archscripts: scripts_basic
$(Q)$(MAKE) $(build)=arch/x86/tools relocs
###
# Syscall table generation
archheaders:
$(Q)$(MAKE) $(build)=arch/x86/entry/syscalls all
###
# Kernel objects
libs-y += arch/x86/lib/
# drivers-y are linked after core-y
drivers-$(CONFIG_MATH_EMULATION) += arch/x86/math-emu/
drivers-$(CONFIG_PCI) += arch/x86/pci/
# suspend and hibernation support
drivers-$(CONFIG_PM) += arch/x86/power/
drivers-$(CONFIG_VIDEO) += arch/x86/video/
####
# boot loader support. Several targets are kept for legacy purposes
boot := arch/x86/boot
BOOT_TARGETS = bzdisk fdimage fdimage144 fdimage288 hdimage isoimage
PHONY += bzImage $(BOOT_TARGETS)
# Default kernel to build
all: bzImage
# KBUILD_IMAGE specify target image being built
KBUILD_IMAGE := $(boot)/bzImage
bzImage: vmlinux
ifeq ($(CONFIG_X86_DECODER_SELFTEST),y)
$(Q)$(MAKE) $(build)=arch/x86/tools posttest
endif
$(Q)$(MAKE) $(build)=$(boot) $(KBUILD_IMAGE)
$(Q)mkdir -p $(objtree)/arch/$(UTS_MACHINE)/boot
$(Q)ln -fsn ../../x86/boot/bzImage $(objtree)/arch/$(UTS_MACHINE)/boot/$@
$(BOOT_TARGETS): vmlinux
$(Q)$(MAKE) $(build)=$(boot) $@
PHONY += install
install:
$(call cmd,install)
vdso-install-$(CONFIG_X86_64) += arch/x86/entry/vdso/vdso64.so.dbg
vdso-install-$(CONFIG_X86_X32_ABI) += arch/x86/entry/vdso/vdsox32.so.dbg
vdso-install-$(CONFIG_COMPAT_32) += arch/x86/entry/vdso/vdso32.so.dbg
archprepare: checkbin
checkbin:
ifdef CONFIG_MITIGATION_RETPOLINE
ifeq ($(RETPOLINE_CFLAGS),)
@echo "You are building kernel with non-retpoline compiler." >&2
@echo "Please update your compiler." >&2
@false
endif
endif
ifdef CONFIG_UNWINDER_ORC
orc_hash_h := arch/$(SRCARCH)/include/generated/asm/orc_hash.h
orc_hash_sh := $(srctree)/scripts/orc_hash.sh
targets += $(orc_hash_h)
quiet_cmd_orc_hash = GEN $@
cmd_orc_hash = mkdir -p $(dir $@); \
$(CONFIG_SHELL) $(orc_hash_sh) < $< > $@
$(orc_hash_h): $(srctree)/arch/x86/include/asm/orc_types.h $(orc_hash_sh) FORCE
$(call if_changed,orc_hash)
archprepare: $(orc_hash_h)
endif
archclean:
$(Q)rm -rf $(objtree)/arch/i386
$(Q)rm -rf $(objtree)/arch/x86_64
define archhelp
echo '* bzImage - Compressed kernel image (arch/x86/boot/bzImage)'
echo ' install - Install kernel using (your) ~/bin/$(INSTALLKERNEL) or'
echo ' (distribution) /sbin/$(INSTALLKERNEL) or install to '
echo ' $$(INSTALL_PATH) and run lilo'
echo ''
echo ' fdimage - Create 1.4MB boot floppy image (arch/x86/boot/fdimage)'
echo ' fdimage144 - Create 1.4MB boot floppy image (arch/x86/boot/fdimage)'
echo ' fdimage288 - Create 2.8MB boot floppy image (arch/x86/boot/fdimage)'
echo ' hdimage - Create a BIOS/EFI hard disk image (arch/x86/boot/hdimage)'
echo ' isoimage - Create a boot CD-ROM image (arch/x86/boot/image.iso)'
echo ' bzdisk/fdimage*/hdimage/isoimage also accept:'
echo ' FDARGS="..." arguments for the booted kernel'
echo ' FDINITRD=file initrd for the booted kernel'
endef
View Git Blame Copy Permalink