1
linux/drivers/ata
Mikael Pettersson cadef677e4 sata_promise: add ATA engine reset to reset ops
Promise ATA engines need to be reset when errors occur.
That's currently done for errors detected by sata_promise itself,
but it's not done for errors like timeouts detected outside of
the low-level driver.

The effect of this omission is that a timeout tends to result
in a sequence of failed COMRESETs after which libata EH gives
up and disables the port. At that point the port's ATA engine
hangs and even reloading the driver will not resume it.

To fix this, make sata_promise override ->hardreset on SATA
ports with code which calls pdc_reset_port() on the port in
question before calling libata's hardreset. PATA ports don't
use ->hardreset, so for those we override ->softreset instead.

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-04 01:08:03 -05:00
..
ahci.c libata: ahci enclosure management bit mask 2008-10-28 00:37:15 -04:00
ata_generic.c ata: Switch all my stuff to a common address 2008-10-27 23:54:50 -04:00
ata_piix.c ATA: remove excess kernel-doc notation 2008-10-31 01:42:49 -04:00
Kconfig Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 2008-10-11 12:39:35 -07:00
libata-acpi.c dock: introduce .uevent for devices in dock, eg libata 2008-09-23 23:23:00 -04:00
libata-core.c libata: add whitelist for devices with known good pata-sata bridges 2008-10-31 01:45:06 -04:00
libata-eh.c libata: clear saved xfer_mode and ncq_enabled on device detach 2008-10-27 23:55:40 -04:00
libata-pmp.c libata: improve EH retry delay handling 2008-07-14 15:59:32 -04:00
libata-scsi.c libata: fix NCQ devices behind port multipliers 2008-10-27 19:25:30 +01:00
libata-sff.c libata-sff: fix ata_sff_post_internal_cmd() 2008-10-22 20:40:15 -04:00
libata.h libata: switch to using block layer tagging support 2008-10-23 16:05:26 -07:00
Makefile libata: Add Intel SCH PATA driver 2008-05-06 11:33:58 -04:00
pata_acpi.c ata: Switch all my stuff to a common address 2008-10-27 23:54:50 -04:00
pata_ali.c ata: Switch all my stuff to a common address 2008-10-27 23:54:50 -04:00
pata_amd.c ata: Switch all my stuff to a common address 2008-10-27 23:54:50 -04:00
pata_artop.c ata: Switch all my stuff to a common address 2008-10-27 23:54:50 -04:00
pata_at32.c avr32: Use <mach/foo.h> instead of <asm/arch/foo.h> 2008-08-05 14:36:57 +02:00
pata_atiixp.c ata: Switch all my stuff to a common address 2008-10-27 23:54:50 -04:00
pata_bf54x.c [libata] pata_bf54x: Add proper PM operation 2008-09-29 00:28:29 -04:00
pata_cmd64x.c ata: Switch all my stuff to a common address 2008-10-27 23:54:50 -04:00
pata_cmd640.c ata: Switch all my stuff to a common address 2008-10-27 23:54:50 -04:00
pata_cs5520.c libata: rename SFF functions 2008-04-17 15:44:21 -04:00
pata_cs5530.c ata: Switch all my stuff to a common address 2008-10-27 23:54:50 -04:00
pata_cs5535.c ata: Switch all my stuff to a common address 2008-10-27 23:54:50 -04:00
pata_cs5536.c libata: rename SFF functions 2008-04-17 15:44:21 -04:00
pata_cypress.c ata: Switch all my stuff to a common address 2008-10-27 23:54:50 -04:00
pata_efar.c ata: Switch all my stuff to a common address 2008-10-27 23:54:50 -04:00
pata_hpt3x2n.c libata: rename SFF functions 2008-04-17 15:44:21 -04:00
pata_hpt3x3.c libata: rename SFF functions 2008-04-17 15:44:21 -04:00
pata_hpt37x.c libata: rename SFF functions 2008-04-17 15:44:21 -04:00
pata_hpt366.c libata: rename SFF functions 2008-04-17 15:44:21 -04:00
pata_icside.c libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl 2008-06-04 06:40:41 -04:00
pata_isapnp.c ata: Switch all my stuff to a common address 2008-10-27 23:54:50 -04:00
pata_it821x.c libata: Fix LBA48 on pata_it821x RAID volumes. 2008-10-27 23:56:33 -04:00
pata_it8213.c libata: rename SFF functions 2008-04-17 15:44:21 -04:00
pata_ixp4xx_cf.c [ARM] 5179/1: Replace obsolete IRQT_* and __IRQT_* values with IRQ_TYPE_* 2008-07-27 09:46:18 +01:00
pata_jmicron.c ata: Switch all my stuff to a common address 2008-10-27 23:54:50 -04:00
pata_legacy.c ata: Switch all my stuff to a common address 2008-10-27 23:54:50 -04:00
pata_marvell.c ata: Switch all my stuff to a common address 2008-10-27 23:54:50 -04:00
pata_mpc52xx.c powerpc/pata_mpc52xx: use linux/of_platform.h instead of asm 2008-07-12 12:10:52 -06:00
pata_mpiix.c ata: Switch all my stuff to a common address 2008-10-27 23:54:50 -04:00
pata_netcell.c ata: Switch all my stuff to a common address 2008-10-27 23:54:50 -04:00
pata_ninja32.c pata_ninja32: suspend/resume support 2008-10-28 00:35:59 -04:00
pata_ns87410.c ata: Switch all my stuff to a common address 2008-10-27 23:54:50 -04:00
pata_ns87415.c ata: Switch all my stuff to a common address 2008-10-27 23:54:50 -04:00
pata_of_platform.c powerpc: Fix no interrupt handling in pata_of_platform 2008-10-10 15:55:17 +11:00
pata_oldpiix.c ata: Switch all my stuff to a common address 2008-10-27 23:54:50 -04:00
pata_opti.c ata: Switch all my stuff to a common address 2008-10-27 23:54:50 -04:00
pata_optidma.c ata: Switch all my stuff to a common address 2008-10-27 23:54:50 -04:00
pata_pcmcia.c ata: Switch all my stuff to a common address 2008-10-27 23:54:50 -04:00
pata_pdc202xx_old.c ata: Switch all my stuff to a common address 2008-10-27 23:54:50 -04:00
pata_pdc2027x.c libata: rename SFF functions 2008-04-17 15:44:21 -04:00
pata_platform.c ata: Switch all my stuff to a common address 2008-10-27 23:54:50 -04:00
pata_qdi.c ata: Switch all my stuff to a common address 2008-10-27 23:54:50 -04:00
pata_radisys.c ata: Switch all my stuff to a common address 2008-10-27 23:54:50 -04:00
pata_rb532_cf.c libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl 2008-06-04 06:40:41 -04:00
pata_rz1000.c libata: rename SFF functions 2008-04-17 15:44:21 -04:00
pata_sc1200.c ata: Switch all my stuff to a common address 2008-10-27 23:54:50 -04:00
pata_scc.c ata: Switch all my stuff to a common address 2008-10-27 23:54:50 -04:00
pata_sch.c libata: Add Intel SCH PATA driver 2008-05-06 11:33:58 -04:00
pata_serverworks.c ata: Switch all my stuff to a common address 2008-10-27 23:54:50 -04:00
pata_sil680.c ata: Switch all my stuff to a common address 2008-10-27 23:54:50 -04:00
pata_sis.c ata: Switch all my stuff to a common address 2008-10-27 23:54:50 -04:00
pata_sl82c105.c ata: Switch all my stuff to a common address 2008-10-27 23:54:50 -04:00
pata_triflex.c ata: Switch all my stuff to a common address 2008-10-27 23:54:50 -04:00
pata_via.c ata: Switch all my stuff to a common address 2008-10-27 23:54:50 -04:00
pata_winbond.c ata: Switch all my stuff to a common address 2008-10-27 23:54:50 -04:00
pdc_adma.c libata: rename SFF functions 2008-04-17 15:44:21 -04:00
sata_fsl.c libata: make SCR access ops per-link 2008-09-29 00:22:28 -04:00
sata_inic162x.c libata: make SCR access ops per-link 2008-09-29 00:22:28 -04:00
sata_mv.c libata: make SCR access ops per-link 2008-09-29 00:22:28 -04:00
sata_nv.c Merge branch 'upstream-2.6.28' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev 2008-10-10 07:46:45 -07:00
sata_promise.c sata_promise: add ATA engine reset to reset ops 2008-11-04 01:08:03 -05:00
sata_promise.h libata annotations and fixes 2008-01-23 05:24:15 -05:00
sata_qstor.c libata: make SCR access ops per-link 2008-09-29 00:22:28 -04:00
sata_sil24.c sata_sil24: configure max read request size to 4k 2008-10-27 23:55:27 -04:00
sata_sil.c libata: make SCR access ops per-link 2008-09-29 00:22:28 -04:00
sata_sis.c libata: make SCR access ops per-link 2008-09-29 00:22:28 -04:00
sata_svw.c libata: make SCR access ops per-link 2008-09-29 00:22:28 -04:00
sata_sx4.c libata: add qc_fill_rtf port operation 2008-04-17 15:44:23 -04:00
sata_uli.c libata: make SCR access ops per-link 2008-09-29 00:22:28 -04:00
sata_via.c sata_via: fix support for 5287 2008-10-31 01:43:28 -04:00
sata_vsc.c libata: make SCR access ops per-link 2008-09-29 00:22:28 -04:00
sis.h