1
linux/net/atm/ioctl.c
David Woodhouse 8865c418ca atm: 32-bit ioctl compatibility
We lack compat ioctl support through most of the ATM code. This patch
deals with most of it, and I can now at least use BR2684 and PPPoATM
with 32-bit userspace.

I haven't added a .compat_ioctl method to struct atm_ioctl, because
AFAICT none of the current users need any conversion -- so we can just
call the ->ioctl() method in every case. I looked at br2684, clip, lec,
mpc, pppoatm and atmtcp.

In svc_compat_ioctl() the only mangling which is needed is to change
COMPAT_ATM_ADDPARTY to ATM_ADDPARTY. Although it's defined as
	_IOW('a', ATMIOC_SPECIAL+4,struct atm_iobuf)
it doesn't actually _take_ a struct atm_iobuf as an argument -- it takes
a struct sockaddr_atmsvc, which _is_ the same between 32-bit and 64-bit
code, so doesn't need conversion.

Almost all of vcc_ioctl() would have been identical, so I converted that
into a core do_vcc_ioctl() function with an 'int compat' argument.

I've done the same with atm_dev_ioctl(), where there _are_ a few
differences, but still it's relatively contained and there would
otherwise have been a lot of duplication.

I haven't done any of the actual device-specific ioctls, although I've
added a compat_ioctl method to struct atmdev_ops.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03 22:12:38 -08:00

200 lines
4.6 KiB
C

/* ATM ioctl handling */
/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
/* 2003 John Levon <levon@movementarian.org> */
#include <linux/module.h>
#include <linux/kmod.h>
#include <linux/net.h> /* struct socket, struct proto_ops */
#include <linux/atm.h> /* ATM stuff */
#include <linux/atmdev.h>
#include <linux/atmclip.h> /* CLIP_*ENCAP */
#include <linux/atmarp.h> /* manifest constants */
#include <linux/capability.h>
#include <linux/sonet.h> /* for ioctls */
#include <linux/atmsvc.h>
#include <linux/atmmpc.h>
#include <net/atmclip.h>
#include <linux/atmlec.h>
#include <linux/mutex.h>
#include <asm/ioctls.h>
#include <net/compat.h>
#include "resources.h"
#include "signaling.h" /* for WAITING and sigd_attach */
#include "common.h"
static DEFINE_MUTEX(ioctl_mutex);
static LIST_HEAD(ioctl_list);
void register_atm_ioctl(struct atm_ioctl *ioctl)
{
mutex_lock(&ioctl_mutex);
list_add_tail(&ioctl->list, &ioctl_list);
mutex_unlock(&ioctl_mutex);
}
void deregister_atm_ioctl(struct atm_ioctl *ioctl)
{
mutex_lock(&ioctl_mutex);
list_del(&ioctl->list);
mutex_unlock(&ioctl_mutex);
}
EXPORT_SYMBOL(register_atm_ioctl);
EXPORT_SYMBOL(deregister_atm_ioctl);
static int do_vcc_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg, int compat)
{
struct sock *sk = sock->sk;
struct atm_vcc *vcc;
int error;
struct list_head * pos;
void __user *argp = (void __user *)arg;
vcc = ATM_SD(sock);
switch (cmd) {
case SIOCOUTQ:
if (sock->state != SS_CONNECTED ||
!test_bit(ATM_VF_READY, &vcc->flags)) {
error = -EINVAL;
goto done;
}
error = put_user(sk->sk_sndbuf -
atomic_read(&sk->sk_wmem_alloc),
(int __user *) argp) ? -EFAULT : 0;
goto done;
case SIOCINQ:
{
struct sk_buff *skb;
if (sock->state != SS_CONNECTED) {
error = -EINVAL;
goto done;
}
skb = skb_peek(&sk->sk_receive_queue);
error = put_user(skb ? skb->len : 0,
(int __user *)argp) ? -EFAULT : 0;
goto done;
}
case SIOCGSTAMP: /* borrowed from IP */
#ifdef CONFIG_COMPAT
if (compat)
error = compat_sock_get_timestamp(sk, argp);
else
#endif
error = sock_get_timestamp(sk, argp);
goto done;
case SIOCGSTAMPNS: /* borrowed from IP */
#ifdef CONFIG_COMPAT
if (compat)
error = compat_sock_get_timestampns(sk, argp);
else
#endif
error = sock_get_timestampns(sk, argp);
goto done;
case ATM_SETSC:
if (net_ratelimit())
printk(KERN_WARNING "ATM_SETSC is obsolete; used by %s:%d\n",
current->comm, task_pid_nr(current));
error = 0;
goto done;
case ATMSIGD_CTRL:
if (!capable(CAP_NET_ADMIN)) {
error = -EPERM;
goto done;
}
/*
* The user/kernel protocol for exchanging signalling
* info uses kernel pointers as opaque references,
* so the holder of the file descriptor can scribble
* on the kernel... so we should make sure that we
* have the same privileges that /proc/kcore needs
*/
if (!capable(CAP_SYS_RAWIO)) {
error = -EPERM;
goto done;
}
#ifdef CONFIG_COMPAT
/* WTF? I don't even want to _think_ about making this
work for 32-bit userspace. TBH I don't really want
to think about it at all. dwmw2. */
if (compat) {
if (net_ratelimit())
printk(KERN_WARNING "32-bit task cannot be atmsigd\n");
error = -EINVAL;
goto done;
}
#endif
error = sigd_attach(vcc);
if (!error)
sock->state = SS_CONNECTED;
goto done;
case ATM_SETBACKEND:
case ATM_NEWBACKENDIF:
{
atm_backend_t backend;
error = get_user(backend, (atm_backend_t __user *) argp);
if (error)
goto done;
switch (backend) {
case ATM_BACKEND_PPP:
request_module("pppoatm");
break;
case ATM_BACKEND_BR2684:
request_module("br2684");
break;
}
}
break;
case ATMMPC_CTRL:
case ATMMPC_DATA:
request_module("mpoa");
break;
case ATMARPD_CTRL:
request_module("clip");
break;
case ATMLEC_CTRL:
request_module("lec");
break;
}
error = -ENOIOCTLCMD;
mutex_lock(&ioctl_mutex);
list_for_each(pos, &ioctl_list) {
struct atm_ioctl * ic = list_entry(pos, struct atm_ioctl, list);
if (try_module_get(ic->owner)) {
error = ic->ioctl(sock, cmd, arg);
module_put(ic->owner);
if (error != -ENOIOCTLCMD)
break;
}
}
mutex_unlock(&ioctl_mutex);
if (error != -ENOIOCTLCMD)
goto done;
error = atm_dev_ioctl(cmd, argp, compat);
done:
return error;
}
int vcc_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
{
return do_vcc_ioctl(sock, cmd, arg, 0);
}
#ifdef CONFIG_COMPAT
int vcc_compat_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
{
return do_vcc_ioctl(sock, cmd, arg, 1);
}
#endif