c9438affcb
On the Freescale embedded (83xx, 85xx, 86xx) and a few of the discrete bridges (mpc10x, tsi108) use the new for_each_compatible_node() or for_each_node_by_type() to provide more exact matching when looking for PHBs in the device tree. With the previous code it was possible to match on pci bridges since we were only matching on device_type. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
231 lines
5.8 KiB
C
231 lines
5.8 KiB
C
/*
|
|
* mpc7448_hpc2.c
|
|
*
|
|
* Board setup routines for the Freescale mpc7448hpc2(taiga) platform
|
|
*
|
|
* Author: Jacob Pan
|
|
* jacob.pan@freescale.com
|
|
* Author: Xianghua Xiao
|
|
* x.xiao@freescale.com
|
|
* Maintainer: Roy Zang <tie-fei.zang@freescale.com>
|
|
* Add Flat Device Tree support fot mpc7448hpc2 board
|
|
*
|
|
* Copyright 2004-2006 Freescale Semiconductor, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/stddef.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/kdev_t.h>
|
|
#include <linux/console.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/root_dev.h>
|
|
#include <linux/serial.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/serial_core.h>
|
|
|
|
#include <asm/system.h>
|
|
#include <asm/time.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/prom.h>
|
|
#include <asm/udbg.h>
|
|
#include <asm/tsi108.h>
|
|
#include <asm/pci-bridge.h>
|
|
#include <asm/reg.h>
|
|
#include <mm/mmu_decl.h>
|
|
#include <asm/tsi108_pci.h>
|
|
#include <asm/tsi108_irq.h>
|
|
#include <asm/mpic.h>
|
|
|
|
#undef DEBUG
|
|
#ifdef DEBUG
|
|
#define DBG(fmt...) do { printk(fmt); } while(0)
|
|
#else
|
|
#define DBG(fmt...) do { } while(0)
|
|
#endif
|
|
|
|
#define MPC7448HPC2_PCI_CFG_PHYS 0xfb000000
|
|
|
|
extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val);
|
|
|
|
int mpc7448_hpc2_exclude_device(struct pci_controller *hose,
|
|
u_char bus, u_char devfn)
|
|
{
|
|
if (bus == 0 && PCI_SLOT(devfn) == 0)
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
else
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
static void __init mpc7448_hpc2_setup_arch(void)
|
|
{
|
|
struct device_node *np;
|
|
if (ppc_md.progress)
|
|
ppc_md.progress("mpc7448_hpc2_setup_arch():set_bridge", 0);
|
|
|
|
tsi108_csr_vir_base = get_vir_csrbase();
|
|
|
|
/* setup PCI host bridge */
|
|
#ifdef CONFIG_PCI
|
|
for_each_compatible_node(np, "pci", "tsi108-pci")
|
|
tsi108_setup_pci(np, MPC7448HPC2_PCI_CFG_PHYS, 0);
|
|
|
|
ppc_md.pci_exclude_device = mpc7448_hpc2_exclude_device;
|
|
if (ppc_md.progress)
|
|
ppc_md.progress("tsi108: resources set", 0x100);
|
|
#endif
|
|
|
|
printk(KERN_INFO "MPC7448HPC2 (TAIGA) Platform\n");
|
|
printk(KERN_INFO
|
|
"Jointly ported by Freescale and Tundra Semiconductor\n");
|
|
printk(KERN_INFO
|
|
"Enabling L2 cache then enabling the HID0 prefetch engine.\n");
|
|
}
|
|
|
|
/*
|
|
* Interrupt setup and service. Interrupts on the mpc7448_hpc2 come
|
|
* from the four external INT pins, PCI interrupts are routed via
|
|
* PCI interrupt control registers, it generates internal IRQ23
|
|
*
|
|
* Interrupt routing on the Taiga Board:
|
|
* TSI108:PB_INT[0] -> CPU0:INT#
|
|
* TSI108:PB_INT[1] -> CPU0:MCP#
|
|
* TSI108:PB_INT[2] -> N/C
|
|
* TSI108:PB_INT[3] -> N/C
|
|
*/
|
|
static void __init mpc7448_hpc2_init_IRQ(void)
|
|
{
|
|
struct mpic *mpic;
|
|
phys_addr_t mpic_paddr = 0;
|
|
struct device_node *tsi_pic;
|
|
#ifdef CONFIG_PCI
|
|
unsigned int cascade_pci_irq;
|
|
struct device_node *tsi_pci;
|
|
struct device_node *cascade_node = NULL;
|
|
#endif
|
|
|
|
tsi_pic = of_find_node_by_type(NULL, "open-pic");
|
|
if (tsi_pic) {
|
|
unsigned int size;
|
|
const void *prop = of_get_property(tsi_pic, "reg", &size);
|
|
mpic_paddr = of_translate_address(tsi_pic, prop);
|
|
}
|
|
|
|
if (mpic_paddr == 0) {
|
|
printk("%s: No tsi108 PIC found !\n", __FUNCTION__);
|
|
return;
|
|
}
|
|
|
|
DBG("%s: tsi108 pic phys_addr = 0x%x\n", __FUNCTION__,
|
|
(u32) mpic_paddr);
|
|
|
|
mpic = mpic_alloc(tsi_pic, mpic_paddr,
|
|
MPIC_PRIMARY | MPIC_BIG_ENDIAN | MPIC_WANTS_RESET |
|
|
MPIC_SPV_EOI | MPIC_NO_PTHROU_DIS | MPIC_REGSET_TSI108,
|
|
24,
|
|
NR_IRQS-4, /* num_sources used */
|
|
"Tsi108_PIC");
|
|
|
|
BUG_ON(mpic == NULL);
|
|
|
|
mpic_assign_isu(mpic, 0, mpic_paddr + 0x100);
|
|
|
|
mpic_init(mpic);
|
|
|
|
#ifdef CONFIG_PCI
|
|
tsi_pci = of_find_node_by_type(NULL, "pci");
|
|
if (tsi_pci == NULL) {
|
|
printk("%s: No tsi108 pci node found !\n", __FUNCTION__);
|
|
return;
|
|
}
|
|
cascade_node = of_find_node_by_type(NULL, "pic-router");
|
|
if (cascade_node == NULL) {
|
|
printk("%s: No tsi108 pci cascade node found !\n", __FUNCTION__);
|
|
return;
|
|
}
|
|
|
|
cascade_pci_irq = irq_of_parse_and_map(tsi_pci, 0);
|
|
DBG("%s: tsi108 cascade_pci_irq = 0x%x\n", __FUNCTION__,
|
|
(u32) cascade_pci_irq);
|
|
tsi108_pci_int_init(cascade_node);
|
|
set_irq_data(cascade_pci_irq, mpic);
|
|
set_irq_chained_handler(cascade_pci_irq, tsi108_irq_cascade);
|
|
#endif
|
|
/* Configure MPIC outputs to CPU0 */
|
|
tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0);
|
|
of_node_put(tsi_pic);
|
|
}
|
|
|
|
void mpc7448_hpc2_show_cpuinfo(struct seq_file *m)
|
|
{
|
|
seq_printf(m, "vendor\t\t: Freescale Semiconductor\n");
|
|
seq_printf(m, "machine\t\t: MPC7448hpc2\n");
|
|
}
|
|
|
|
void mpc7448_hpc2_restart(char *cmd)
|
|
{
|
|
local_irq_disable();
|
|
|
|
/* Set exception prefix high - to the firmware */
|
|
_nmask_and_or_msr(0, MSR_IP);
|
|
|
|
for (;;) ; /* Spin until reset happens */
|
|
}
|
|
|
|
void mpc7448_hpc2_power_off(void)
|
|
{
|
|
local_irq_disable();
|
|
for (;;) ; /* No way to shut power off with software */
|
|
}
|
|
|
|
void mpc7448_hpc2_halt(void)
|
|
{
|
|
mpc7448_hpc2_power_off();
|
|
}
|
|
|
|
/*
|
|
* Called very early, device-tree isn't unflattened
|
|
*/
|
|
static int __init mpc7448_hpc2_probe(void)
|
|
{
|
|
unsigned long root = of_get_flat_dt_root();
|
|
|
|
if (!of_flat_dt_is_compatible(root, "mpc74xx"))
|
|
return 0;
|
|
return 1;
|
|
}
|
|
|
|
static int mpc7448_machine_check_exception(struct pt_regs *regs)
|
|
{
|
|
const struct exception_table_entry *entry;
|
|
|
|
/* Are we prepared to handle this fault */
|
|
if ((entry = search_exception_tables(regs->nip)) != NULL) {
|
|
tsi108_clear_pci_cfg_error();
|
|
regs->msr |= MSR_RI;
|
|
regs->nip = entry->fixup;
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
define_machine(mpc7448_hpc2){
|
|
.name = "MPC7448 HPC2",
|
|
.probe = mpc7448_hpc2_probe,
|
|
.setup_arch = mpc7448_hpc2_setup_arch,
|
|
.init_IRQ = mpc7448_hpc2_init_IRQ,
|
|
.show_cpuinfo = mpc7448_hpc2_show_cpuinfo,
|
|
.get_irq = mpic_get_irq,
|
|
.restart = mpc7448_hpc2_restart,
|
|
.calibrate_decr = generic_calibrate_decr,
|
|
.machine_check_exception= mpc7448_machine_check_exception,
|
|
.progress = udbg_progress,
|
|
};
|