1
linux/arch/mips/lib/memset.S
Atsushi Nemoto a583158c9c [MIPS] Unify memset.S
The 32-bit version and 64-bit version are almost equal.  Unify them.
This makes further improvements (for example, supporting CDEX, etc.)
easier.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-06 16:53:12 +00:00

167 lines
3.8 KiB
ArmAsm

/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1998, 1999, 2000 by Ralf Baechle
* Copyright (C) 1999, 2000 Silicon Graphics, Inc.
*/
#include <asm/asm.h>
#include <asm/asm-offsets.h>
#include <asm/regdef.h>
#if LONGSIZE == 4
#define LONG_S_L swl
#define LONG_S_R swr
#else
#define LONG_S_L sdl
#define LONG_S_R sdr
#endif
#define EX(insn,reg,addr,handler) \
9: insn reg, addr; \
.section __ex_table,"a"; \
PTR 9b, handler; \
.previous
.macro f_fill64 dst, offset, val, fixup
EX(LONG_S, \val, (\offset + 0 * LONGSIZE)(\dst), \fixup)
EX(LONG_S, \val, (\offset + 1 * LONGSIZE)(\dst), \fixup)
EX(LONG_S, \val, (\offset + 2 * LONGSIZE)(\dst), \fixup)
EX(LONG_S, \val, (\offset + 3 * LONGSIZE)(\dst), \fixup)
EX(LONG_S, \val, (\offset + 4 * LONGSIZE)(\dst), \fixup)
EX(LONG_S, \val, (\offset + 5 * LONGSIZE)(\dst), \fixup)
EX(LONG_S, \val, (\offset + 6 * LONGSIZE)(\dst), \fixup)
EX(LONG_S, \val, (\offset + 7 * LONGSIZE)(\dst), \fixup)
#if LONGSIZE == 4
EX(LONG_S, \val, (\offset + 8 * LONGSIZE)(\dst), \fixup)
EX(LONG_S, \val, (\offset + 9 * LONGSIZE)(\dst), \fixup)
EX(LONG_S, \val, (\offset + 10 * LONGSIZE)(\dst), \fixup)
EX(LONG_S, \val, (\offset + 11 * LONGSIZE)(\dst), \fixup)
EX(LONG_S, \val, (\offset + 12 * LONGSIZE)(\dst), \fixup)
EX(LONG_S, \val, (\offset + 13 * LONGSIZE)(\dst), \fixup)
EX(LONG_S, \val, (\offset + 14 * LONGSIZE)(\dst), \fixup)
EX(LONG_S, \val, (\offset + 15 * LONGSIZE)(\dst), \fixup)
#endif
.endm
/*
* memset(void *s, int c, size_t n)
*
* a0: start of area to clear
* a1: char to fill with
* a2: size of area to clear
*/
.set noreorder
.align 5
LEAF(memset)
beqz a1, 1f
move v0, a0 /* result */
andi a1, 0xff /* spread fillword */
LONG_SLL t1, a1, 8
or a1, t1
LONG_SLL t1, a1, 16
#if LONGSIZE == 8
or a1, t1
LONG_SLL t1, a1, 32
#endif
or a1, t1
1:
FEXPORT(__bzero)
sltiu t0, a2, LONGSIZE /* very small region? */
bnez t0, small_memset
andi t0, a0, LONGMASK /* aligned? */
beqz t0, 1f
PTR_SUBU t0, LONGSIZE /* alignment in bytes */
#ifdef __MIPSEB__
EX(LONG_S_L, a1, (a0), first_fixup) /* make word/dword aligned */
#endif
#ifdef __MIPSEL__
EX(LONG_S_R, a1, (a0), first_fixup) /* make word/dword aligned */
#endif
PTR_SUBU a0, t0 /* long align ptr */
PTR_ADDU a2, t0 /* correct size */
1: ori t1, a2, 0x3f /* # of full blocks */
xori t1, 0x3f
beqz t1, memset_partial /* no block to fill */
andi t0, a2, 0x40-LONGSIZE
PTR_ADDU t1, a0 /* end address */
.set reorder
1: PTR_ADDIU a0, 64
f_fill64 a0, -64, a1, fwd_fixup
bne t1, a0, 1b
.set noreorder
memset_partial:
PTR_LA t1, 2f /* where to start */
#if LONGSIZE == 4
PTR_SUBU t1, t0
#else
.set noat
LONG_SRL AT, t0, 1
PTR_SUBU t1, AT
.set noat
#endif
jr t1
PTR_ADDU a0, t0 /* dest ptr */
.set push
.set noreorder
.set nomacro
f_fill64 a0, -64, a1, partial_fixup /* ... but first do longs ... */
2: .set pop
andi a2, LONGMASK /* At most one long to go */
beqz a2, 1f
PTR_ADDU a0, a2 /* What's left */
#ifdef __MIPSEB__
EX(LONG_S_R, a1, -1(a0), last_fixup)
#endif
#ifdef __MIPSEL__
EX(LONG_S_L, a1, -1(a0), last_fixup)
#endif
1: jr ra
move a2, zero
small_memset:
beqz a2, 2f
PTR_ADDU t1, a0, a2
1: PTR_ADDIU a0, 1 /* fill bytewise */
bne t1, a0, 1b
sb a1, -1(a0)
2: jr ra /* done */
move a2, zero
END(memset)
first_fixup:
jr ra
nop
fwd_fixup:
PTR_L t0, TI_TASK($28)
LONG_L t0, THREAD_BUADDR(t0)
andi a2, 0x3f
LONG_ADDU a2, t1
jr ra
LONG_SUBU a2, t0
partial_fixup:
PTR_L t0, TI_TASK($28)
LONG_L t0, THREAD_BUADDR(t0)
andi a2, LONGMASK
LONG_ADDU a2, t1
jr ra
LONG_SUBU a2, t0
last_fixup:
jr ra
andi v1, a2, LONGMASK