1
linux/drivers/scsi/isci/events.c
Dan Williams 6ad31fec30 isci: replace isci_remote_device completion with event queue
Replace the device completion infrastructure with the controller wide
event queue.  There was a potential for the stop and ready notifications
to corrupt each other, now that cannot happen.

The stop pending flag cannot be used until devices are statically
allocated.  We temporarily need to maintain a completion to handle
waiting for an object that has disappeared, but we can at least stop
scribbling on freed memory.

A future change will also get rid of the "stopping" state as it should
not be exposed to the rest of the driver.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-07-03 03:55:29 -07:00

610 lines
20 KiB
C

/*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.GPL.
*
* BSD LICENSE
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**
* This file contains isci module object implementation.
*
*
*/
#include "isci.h"
#include "request.h"
#include "sata.h"
#include "task.h"
#include "events.h"
/**
* isci_event_timer_create() - This callback method asks the user to create a
* timer and provide a handle for this timer for use in further timer
* interactions. The appropriate isci timer object function is called to
* create a timer object.
* @timer_callback: This parameter specifies the callback method to be invoked
* whenever the timer expires.
* @controller: This parameter specifies the controller with which this timer
* is to be associated.
* @cb_param: opaque callback parameter
*
* This method returns a handle to a timer object created by the user. The
* handle will be utilized for all further interactions relating to this timer.
*/
void *isci_event_timer_create(struct scic_sds_controller *scic,
void (*timer_callback)(void *),
void *cb_param)
{
struct isci_host *ihost = sci_object_get_association(scic);
struct isci_timer *itimer;
itimer = isci_timer_create(ihost, cb_param, timer_callback);
dev_dbg(&ihost->pdev->dev, "%s: timer = %p\n", __func__, itimer);
return itimer;
}
/**
* isci_event_timer_start() - This callback method asks the user to start the
* supplied timer. The appropriate isci timer object function is called to
* start the timer.
* @controller: This parameter specifies the controller with which this timer
* is to associated.
* @timer: This parameter specifies the timer to be started.
* @milliseconds: This parameter specifies the number of milliseconds for which
* to stall. The operating system driver is allowed to round this value up
* where necessary.
*
*/
void isci_event_timer_start(
struct scic_sds_controller *controller,
void *timer,
u32 milliseconds)
{
struct isci_host *isci_host;
isci_host =
(struct isci_host *)sci_object_get_association(controller);
dev_dbg(&isci_host->pdev->dev,
"%s: isci_host = %p, timer = %p, milliseconds = %d\n",
__func__, isci_host, timer, milliseconds);
isci_timer_start((struct isci_timer *)timer, milliseconds);
}
/**
* isci_event_timer_stop() - This callback method asks the user to stop the
* supplied timer. The appropriate isci timer object function is called to
* stop the timer.
* @controller: This parameter specifies the controller with which this timer
* is to associated.
* @timer: This parameter specifies the timer to be stopped.
*
*/
void isci_event_timer_stop(struct scic_sds_controller *controller, void *timer)
{
struct isci_host *isci_host = sci_object_get_association(controller);
dev_dbg(&isci_host->pdev->dev,
"%s: isci_host = %p, timer = %p\n",
__func__, isci_host, timer);
isci_timer_stop((struct isci_timer *)timer);
}
void isci_event_timer_destroy(struct scic_sds_controller *scic, void *timer)
{
struct isci_host *ihost = sci_object_get_association(scic);
dev_dbg(&ihost->pdev->dev, "%s: ihost = %p, timer = %p\n",
__func__, ihost, timer);
isci_del_timer(ihost, timer);
}
/**
* isci_event_controller_start_complete() - This user callback will inform the
* user that the controller has finished the start process. The associated
* isci host adapter's start_complete function is called.
* @controller: This parameter specifies the controller that was started.
* @completion_status: This parameter specifies the results of the start
* operation. SCI_SUCCESS indicates successful completion.
*
*/
void isci_event_controller_start_complete(
struct scic_sds_controller *controller,
enum sci_status completion_status)
{
struct isci_host *isci_host =
(struct isci_host *)sci_object_get_association(controller);
dev_dbg(&isci_host->pdev->dev,
"%s: isci_host = %p\n", __func__, isci_host);
isci_host_start_complete(isci_host, completion_status);
}
/**
* isci_event_controller_stop_complete() - This user callback will inform the user
* that the controller has finished the stop process. The associated isci
* host adapter's start_complete function is called.
* @controller: This parameter specifies the controller that was stopped.
* @completion_status: This parameter specifies the results of the stop
* operation. SCI_SUCCESS indicates successful completion.
*
*/
void isci_event_controller_stop_complete(
struct scic_sds_controller *controller,
enum sci_status completion_status)
{
struct isci_host *isci_host =
(struct isci_host *)sci_object_get_association(controller);
dev_dbg(&isci_host->pdev->dev,
"%s: status = 0x%x\n", __func__, completion_status);
isci_host_stop_complete(isci_host, completion_status);
}
/**
* isci_event_io_request_complete() - This user callback will inform the user that
* an IO request has completed.
* @controller: This parameter specifies the controller on which the IO is
* completing.
* @remote_device: This parameter specifies the remote device on which this IO
* request is completing.
* @io_request: This parameter specifies the IO request that has completed.
* @completion_status: This parameter specifies the results of the IO request
* operation. SCI_SUCCESS indicates successful completion.
*
*/
void isci_event_io_request_complete(
struct scic_sds_controller *controller,
struct scic_sds_remote_device *remote_device,
struct scic_sds_request *scic_io_request,
enum sci_io_status completion_status)
{
struct isci_request *request;
struct isci_host *isci_host;
isci_host =
(struct isci_host *)sci_object_get_association(controller);
request =
(struct isci_request *)sci_object_get_association(
scic_io_request
);
isci_request_io_request_complete(isci_host,
request,
completion_status);
}
/**
* isci_event_task_request_complete() - This user callback will inform the user
* that a task management request completed.
* @controller: This parameter specifies the controller on which the task
* management request is completing.
* @remote_device: This parameter specifies the remote device on which this
* task management request is completing.
* @task_request: This parameter specifies the task management request that has
* completed.
* @completion_status: This parameter specifies the results of the IO request
* operation. SCI_SUCCESS indicates successful completion.
*
*/
void isci_event_task_request_complete(
struct scic_sds_controller *controller,
struct scic_sds_remote_device *remote_device,
struct scic_sds_request *scic_task_request,
enum sci_task_status completion_status)
{
struct isci_request *request;
struct isci_host *isci_host;
isci_host =
(struct isci_host *)sci_object_get_association(controller);
request =
(struct isci_request *)sci_object_get_association(
scic_task_request);
isci_task_request_complete(isci_host, request, completion_status);
}
/**
* isci_event_port_stop_complete() - This method informs the user when a stop
* operation on the port has completed.
* @controller: This parameter represents the controller which contains the
* port.
* @port: This parameter specifies the SCI port object for which the callback
* is being invoked.
* @completion_status: This parameter specifies the status for the operation
* being completed.
*
*/
void isci_event_port_stop_complete(
struct scic_sds_controller *controller,
struct scic_sds_port *port,
enum sci_status completion_status)
{
struct isci_host *isci_host;
isci_host = (struct isci_host *)sci_object_get_association(controller);
dev_notice(&isci_host->pdev->dev, "Port stop complete\n");
}
/**
* isci_event_port_hard_reset_complete() - This method informs the user when a
* hard reset on the port has completed. This hard reset could have been
* initiated by the user or by the remote port.
* @controller: This parameter represents the controller which contains the
* port.
* @port: This parameter specifies the SCI port object for which the callback
* is being invoked.
* @completion_status: This parameter specifies the status for the operation
* being completed.
*
*/
void isci_event_port_hard_reset_complete(
struct scic_sds_controller *controller,
struct scic_sds_port *port,
enum sci_status completion_status)
{
struct isci_port *isci_port
= (struct isci_port *)sci_object_get_association(port);
isci_port_hard_reset_complete(isci_port, completion_status);
}
/**
* isci_event_port_ready() - This method informs the user that the port is now in
* a ready state and can be utilized to issue IOs.
* @controller: This parameter represents the controller which contains the
* port.
* @port: This parameter specifies the SCI port object for which the callback
* is being invoked.
*
*/
void isci_event_port_ready(
struct scic_sds_controller *controller,
struct scic_sds_port *port)
{
struct isci_port *isci_port;
struct isci_host *isci_host;
isci_host =
(struct isci_host *)sci_object_get_association(controller);
isci_port =
(struct isci_port *)sci_object_get_association(port);
dev_dbg(&isci_host->pdev->dev,
"%s: isci_port = %p\n", __func__, isci_port);
isci_port_ready(isci_host, isci_port);
}
/**
* isci_event_port_not_ready() - This method informs the user that the port is now
* not in a ready (i.e. busy) state and can't be utilized to issue IOs.
* @controller: This parameter represents the controller which contains the
* port.
* @port: This parameter specifies the SCI port object for which the callback
* is being invoked.
*
*/
void isci_event_port_not_ready(
struct scic_sds_controller *controller,
struct scic_sds_port *port,
u32 reason_code)
{
struct isci_port *isci_port;
struct isci_host *isci_host;
isci_host =
(struct isci_host *)sci_object_get_association(controller);
isci_port =
(struct isci_port *)sci_object_get_association(port);
dev_dbg(&isci_host->pdev->dev,
"%s: isci_port = %p\n", __func__, isci_port);
isci_port_not_ready(isci_host, isci_port);
}
/**
* isci_event_port_invalid_link_up() - This method informs the SCI Core user that
* a phy/link became ready, but the phy is not allowed in the port. In some
* situations the underlying hardware only allows for certain phy to port
* mappings. If these mappings are violated, then this API is invoked.
* @controller: This parameter represents the controller which contains the
* port.
* @port: This parameter specifies the SCI port object for which the callback
* is being invoked.
* @phy: This parameter specifies the phy that came ready, but the phy can't be
* a valid member of the port.
*
*/
void isci_event_port_invalid_link_up(
struct scic_sds_controller *controller,
struct scic_sds_port *port,
struct scic_sds_phy *phy)
{
struct isci_host *isci_host;
isci_host = (struct isci_host *)sci_object_get_association(controller);
dev_warn(&isci_host->pdev->dev, "Invalid link up!\n");
}
/**
* isci_event_port_bc_change_primitive_received() - This callback method informs
* the user that a broadcast change primitive was received.
* @controller: This parameter represents the controller which contains the
* port.
* @port: This parameter specifies the SCI port object for which the callback
* is being invoked. For instances where the phy on which the primitive was
* received is not part of a port, this parameter will be NULL.
* @phy: This parameter specifies the phy on which the primitive was received.
*
*/
void isci_event_port_bc_change_primitive_received(
struct scic_sds_controller *controller,
struct scic_sds_port *port,
struct scic_sds_phy *phy)
{
struct isci_host *isci_host;
isci_host =
(struct isci_host *)sci_object_get_association(controller);
dev_dbg(&isci_host->pdev->dev,
"%s: port = %p, phy = %p\n", __func__, port, phy);
isci_port_bc_change_received(isci_host, port, phy);
}
/**
* isci_event_port_link_up() - This callback method informs the user that a phy
* has become operational and is capable of communicating with the remote
* end point.
* @controller: This parameter represents the controller associated with the
* phy.
* @port: This parameter specifies the port object for which the user callback
* is being invoked. There may be conditions where this parameter can be
* NULL
* @phy: This parameter specifies the phy object for which the user callback is
* being invoked.
*
* none.
*/
void isci_event_port_link_up(
struct scic_sds_controller *controller,
struct scic_sds_port *port,
struct scic_sds_phy *phy)
{
struct isci_host *isci_host;
isci_host =
(struct isci_host *)sci_object_get_association(controller);
dev_dbg(&isci_host->pdev->dev,
"%s: phy = %p\n", __func__, phy);
isci_port_link_up(isci_host, port, phy);
}
/**
* isci_event_port_link_down() - This callback method informs the user that a phy
* is no longer operational and is not capable of communicating with the
* remote end point.
* @controller: This parameter represents the controller associated with the
* phy.
* @port: This parameter specifies the port object for which the user callback
* is being invoked. There may be conditions where this parameter can be
* NULL
* @phy: This parameter specifies the phy object for which the user callback is
* being invoked.
*
* none.
*/
void isci_event_port_link_down(
struct scic_sds_controller *controller,
struct scic_sds_port *port,
struct scic_sds_phy *phy)
{
struct isci_host *isci_host;
struct isci_phy *isci_phy;
struct isci_port *isci_port;
isci_host =
(struct isci_host *)sci_object_get_association(controller);
isci_phy =
(struct isci_phy *)sci_object_get_association(phy);
isci_port =
(struct isci_port *)sci_object_get_association(port);
dev_dbg(&isci_host->pdev->dev,
"%s: isci_port = %p\n", __func__, isci_port);
isci_port_link_down(isci_host, isci_phy, isci_port);
}
/**
* isci_event_remote_device_start_complete() - This user callback method will
* inform the user that a start operation has completed.
* @controller: This parameter specifies the core controller associated with
* the completion callback.
* @remote_device: This parameter specifies the remote device associated with
* the completion callback.
* @completion_status: This parameter specifies the completion status for the
* operation.
*
*/
void isci_event_remote_device_start_complete(
struct scic_sds_controller *controller,
struct scic_sds_remote_device *remote_device,
enum sci_status completion_status)
{
struct isci_host *isci_host;
struct isci_remote_device *isci_device;
isci_host =
(struct isci_host *)sci_object_get_association(controller);
isci_device =
(struct isci_remote_device *)sci_object_get_association(
remote_device
);
dev_dbg(&isci_host->pdev->dev,
"%s: isci_device = %p\n", __func__, isci_device);
isci_remote_device_start_complete(
isci_host, isci_device, completion_status);
}
/**
* isci_event_remote_device_stop_complete() - This user callback method will
* inform the user that a stop operation has completed.
* @scic: This parameter specifies the core controller associated with
* the completion callback.
* @remote_device: This parameter specifies the remote device associated with
* the completion callback.
* @completion_status: This parameter specifies the completion status for the
* operation.
*
*/
void isci_event_remote_device_stop_complete(struct scic_sds_controller *scic,
struct scic_sds_remote_device *sci_dev,
enum sci_status completion_status)
{
struct isci_host *ihost;
struct isci_remote_device *idev;
ihost = sci_object_get_association(scic);
idev = sci_object_get_association(sci_dev);
dev_dbg(&ihost->pdev->dev,
"%s: idev = %p\n", __func__, idev);
isci_remote_device_stop_complete(ihost, idev, completion_status);
}
/**
* isci_event_remote_device_ready() - This user callback method will inform the
* user that a remote device is now capable of handling IO requests.
* @controller: This parameter specifies the core controller associated with
* the completion callback.
* @remote_device: This parameter specifies the remote device associated with
* the callback.
*
*/
void isci_event_remote_device_ready(
struct scic_sds_controller *controller,
struct scic_sds_remote_device *remote_device)
{
struct isci_remote_device *isci_device =
(struct isci_remote_device *)
sci_object_get_association(remote_device);
dev_dbg(&isci_device->isci_port->isci_host->pdev->dev,
"%s: isci_device = %p\n", __func__, isci_device);
isci_remote_device_ready(isci_device);
}
/**
* isci_event_remote_device_not_ready() - This user callback method will inform
* the user that a remote device is no longer capable of handling IO
* requests (until a ready callback is invoked).
* @controller: This parameter specifies the core controller associated with
* the completion callback.
* @remote_device: This parameter specifies the remote device associated with
* the callback.
* @reason_code: This parameter specifies the reason for the remote device
* going to a not ready state.
*
*/
void isci_event_remote_device_not_ready(
struct scic_sds_controller *controller,
struct scic_sds_remote_device *remote_device,
u32 reason_code)
{
struct isci_remote_device *isci_device =
(struct isci_remote_device *)
sci_object_get_association(remote_device);
struct isci_host *isci_host;
isci_host =
(struct isci_host *)sci_object_get_association(controller);
dev_dbg(&isci_host->pdev->dev,
"%s: isci_device = %p, reason_code = %x\n",
__func__, isci_device, reason_code);
isci_remote_device_not_ready(isci_device, reason_code);
}