1
linux/arch/arm/mach-omap2/pm.h
Peter 'p2' De Schrijver c4236d2e79 OMAP3630: PM: Disable L2 cache while invalidating L2 cache
While coming out of MPU OSWR/OFF states, L2 controller is reseted.
The reset behavior is implementation specific as per ARMv7 TRM and
hence $L2 needs to be invalidated before it's use. Since the
AUXCTRL register is also reconfigured, disable L2 cache before
invalidating it and re-enables it afterwards. This is as per
Cortex-A8 ARM documentation.
Currently this is identified as being needed on OMAP3630 as the
disable/enable is done from "public side" while, on OMAP3430, this
is done in the "secure side".

Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Tony Lindgren <tony@atomide.com>

Acked-by: Jean Pihet <j-pihet@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>

[nm@ti.com: ported to 2.6.37-rc2, added hooks to enable the logic only on 3630]
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Signed-off-by: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21 14:45:51 -08:00

100 lines
3.1 KiB
C

/*
* OMAP2/3 Power Management Routines
*
* Copyright (C) 2008 Nokia Corporation
* Jouni Hogander
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ARCH_ARM_MACH_OMAP2_PM_H
#define __ARCH_ARM_MACH_OMAP2_PM_H
#include <plat/powerdomain.h>
extern void *omap3_secure_ram_storage;
extern void omap3_pm_off_mode_enable(int);
extern void omap_sram_idle(void);
extern int omap3_can_sleep(void);
extern int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state);
extern int omap3_idle_init(void);
struct cpuidle_params {
u8 valid;
u32 sleep_latency;
u32 wake_latency;
u32 threshold;
};
#if defined(CONFIG_PM) && defined(CONFIG_CPU_IDLE)
extern void omap3_pm_init_cpuidle(struct cpuidle_params *cpuidle_board_params);
#else
static
inline void omap3_pm_init_cpuidle(struct cpuidle_params *cpuidle_board_params)
{
}
#endif
extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm);
extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state);
extern u32 wakeup_timer_seconds;
extern u32 wakeup_timer_milliseconds;
extern struct omap_dm_timer *gptimer_wakeup;
#ifdef CONFIG_PM_DEBUG
extern void omap2_pm_dump(int mode, int resume, unsigned int us);
extern void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds);
extern int omap2_pm_debug;
extern u32 enable_off_mode;
extern u32 sleep_while_idle;
#else
#define omap2_pm_dump(mode, resume, us) do {} while (0);
#define omap2_pm_wakeup_on_timer(seconds, milliseconds) do {} while (0);
#define omap2_pm_debug 0
#define enable_off_mode 0
#define sleep_while_idle 0
#endif
#if defined(CONFIG_CPU_IDLE)
extern void omap3_cpuidle_update_states(void);
#endif
#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
extern void pm_dbg_update_time(struct powerdomain *pwrdm, int prev);
extern int pm_dbg_regset_save(int reg_set);
extern int pm_dbg_regset_init(int reg_set);
#else
#define pm_dbg_update_time(pwrdm, prev) do {} while (0);
#define pm_dbg_regset_save(reg_set) do {} while (0);
#define pm_dbg_regset_init(reg_set) do {} while (0);
#endif /* CONFIG_PM_DEBUG */
extern void omap24xx_idle_loop_suspend(void);
extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl,
void __iomem *sdrc_power);
extern void omap34xx_cpu_suspend(u32 *addr, int save_state);
extern void save_secure_ram_context(u32 *addr);
extern void omap3_save_scratchpad_contents(void);
extern unsigned int omap24xx_idle_loop_suspend_sz;
extern unsigned int omap34xx_suspend_sz;
extern unsigned int save_secure_ram_context_sz;
extern unsigned int omap24xx_cpu_suspend_sz;
extern unsigned int omap34xx_cpu_suspend_sz;
#define PM_RTA_ERRATUM_i608 (1 << 0)
#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3)
extern u16 pm34xx_errata;
#define IS_PM34XX_ERRATUM(id) (pm34xx_errata & (id))
extern void enable_omap3630_toggle_l2_on_restore(void);
#else
#define IS_PM34XX_ERRATUM(id) 0
static inline void enable_omap3630_toggle_l2_on_restore(void) { }
#endif /* defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) */
#endif