1
linux/arch/mn10300/include/asm/spinlock.h
Akira Takeuchi 368dd5acd1 MN10300: And Panasonic AM34 subarch and implement SMP
Implement the Panasonic MN10300 AM34 CPU subarch and implement SMP support for
MN10300.  Also implement support for the MN2WS0060 processor and the ASB2364
evaluation board which are AM34 based.

Signed-off-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: Kiyoshi Owada <owada.kiyoshi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-27 17:28:55 +01:00

194 lines
4.2 KiB
C

/* MN10300 spinlock support
*
* Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public Licence
* as published by the Free Software Foundation; either version
* 2 of the Licence, or (at your option) any later version.
*/
#ifndef _ASM_SPINLOCK_H
#define _ASM_SPINLOCK_H
#include <asm/atomic.h>
#include <asm/rwlock.h>
#include <asm/page.h>
/*
* Simple spin lock operations. There are two variants, one clears IRQ's
* on the local processor, one does not.
*
* We make no fairness assumptions. They have a cost.
*/
#define arch_spin_is_locked(x) (*(volatile signed char *)(&(x)->slock) != 0)
#define arch_spin_unlock_wait(x) do { barrier(); } while (arch_spin_is_locked(x))
static inline void arch_spin_unlock(arch_spinlock_t *lock)
{
asm volatile(
" bclr 1,(0,%0) \n"
:
: "a"(&lock->slock)
: "memory", "cc");
}
static inline int arch_spin_trylock(arch_spinlock_t *lock)
{
int ret;
asm volatile(
" mov 1,%0 \n"
" bset %0,(%1) \n"
" bne 1f \n"
" clr %0 \n"
"1: xor 1,%0 \n"
: "=d"(ret)
: "a"(&lock->slock)
: "memory", "cc");
return ret;
}
static inline void arch_spin_lock(arch_spinlock_t *lock)
{
asm volatile(
"1: bset 1,(0,%0) \n"
" bne 1b \n"
:
: "a"(&lock->slock)
: "memory", "cc");
}
static inline void arch_spin_lock_flags(arch_spinlock_t *lock,
unsigned long flags)
{
int temp;
asm volatile(
"1: bset 1,(0,%2) \n"
" beq 3f \n"
" mov %1,epsw \n"
"2: mov (0,%2),%0 \n"
" or %0,%0 \n"
" bne 2b \n"
" mov %3,%0 \n"
" mov %0,epsw \n"
" nop \n"
" nop \n"
" bra 1b\n"
"3: \n"
: "=&d" (temp)
: "d" (flags), "a"(&lock->slock), "i"(EPSW_IE | MN10300_CLI_LEVEL)
: "memory", "cc");
}
#ifdef __KERNEL__
/*
* Read-write spinlocks, allowing multiple readers
* but only one writer.
*
* NOTE! it is quite common to have readers in interrupts
* but no interrupt writers. For those circumstances we
* can "mix" irq-safe locks - any writer needs to get a
* irq-safe write-lock, but readers can get non-irqsafe
* read-locks.
*/
/**
* read_can_lock - would read_trylock() succeed?
* @lock: the rwlock in question.
*/
#define arch_read_can_lock(x) ((int)(x)->lock > 0)
/**
* write_can_lock - would write_trylock() succeed?
* @lock: the rwlock in question.
*/
#define arch_write_can_lock(x) ((x)->lock == RW_LOCK_BIAS)
/*
* On mn10300, we implement read-write locks as a 32-bit counter
* with the high bit (sign) being the "contended" bit.
*/
static inline void arch_read_lock(arch_rwlock_t *rw)
{
#if 0 //def CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT
__build_read_lock(rw, "__read_lock_failed");
#else
{
atomic_t *count = (atomic_t *)rw;
while (atomic_dec_return(count) < 0)
atomic_inc(count);
}
#endif
}
static inline void arch_write_lock(arch_rwlock_t *rw)
{
#if 0 //def CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT
__build_write_lock(rw, "__write_lock_failed");
#else
{
atomic_t *count = (atomic_t *)rw;
while (!atomic_sub_and_test(RW_LOCK_BIAS, count))
atomic_add(RW_LOCK_BIAS, count);
}
#endif
}
static inline void arch_read_unlock(arch_rwlock_t *rw)
{
#if 0 //def CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT
__build_read_unlock(rw);
#else
{
atomic_t *count = (atomic_t *)rw;
atomic_inc(count);
}
#endif
}
static inline void arch_write_unlock(arch_rwlock_t *rw)
{
#if 0 //def CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT
__build_write_unlock(rw);
#else
{
atomic_t *count = (atomic_t *)rw;
atomic_add(RW_LOCK_BIAS, count);
}
#endif
}
static inline int arch_read_trylock(arch_rwlock_t *lock)
{
atomic_t *count = (atomic_t *)lock;
atomic_dec(count);
if (atomic_read(count) >= 0)
return 1;
atomic_inc(count);
return 0;
}
static inline int arch_write_trylock(arch_rwlock_t *lock)
{
atomic_t *count = (atomic_t *)lock;
if (atomic_sub_and_test(RW_LOCK_BIAS, count))
return 1;
atomic_add(RW_LOCK_BIAS, count);
return 0;
}
#define arch_read_lock_flags(lock, flags) arch_read_lock(lock)
#define arch_write_lock_flags(lock, flags) arch_write_lock(lock)
#define _raw_spin_relax(lock) cpu_relax()
#define _raw_read_relax(lock) cpu_relax()
#define _raw_write_relax(lock) cpu_relax()
#endif /* __KERNEL__ */
#endif /* _ASM_SPINLOCK_H */