1
linux/kernel/bpf/trampoline.c
Linus Torvalds 1b294a1f35 Networking changes for 6.10.
Core & protocols
 ----------------
 
  - Complete rework of garbage collection of AF_UNIX sockets.
    AF_UNIX is prone to forming reference count cycles due to fd passing
    functionality. New method based on Tarjan's Strongly Connected Components
    algorithm should be both faster and remove a lot of workarounds
    we accumulated over the years.
 
  - Add TCP fraglist GRO support, allowing chaining multiple TCP packets
    and forwarding them together. Useful for small switches / routers which
    lack basic checksum offload in some scenarios (e.g. PPPoE).
 
  - Support using SMP threads for handling packet backlog i.e. packet
    processing from software interfaces and old drivers which don't
    use NAPI. This helps move the processing out of the softirq jumble.
 
  - Continue work of converting from rtnl lock to RCU protection.
    Don't require rtnl lock when reading: IPv6 routing FIB, IPv6 address
    labels, netdev threaded NAPI sysfs files, bonding driver's sysfs files,
    MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics, TC Qdiscs,
    neighbor entries, ARP entries via ioctl(SIOCGARP), a lot of the link
    information available via rtnetlink.
 
  - Small optimizations from Eric to UDP wake up handling, memory accounting,
    RPS/RFS implementation, TCP packet sizing etc.
 
  - Allow direct page recycling in the bulk API used by XDP, for +2% PPS.
 
  - Support peek with an offset on TCP sockets.
 
  - Add MPTCP APIs for querying last time packets were received/sent/acked,
    and whether MPTCP "upgrade" succeeded on a TCP socket.
 
  - Add intra-node communication shortcut to improve SMC performance.
 
  - Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol driver.
 
  - Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.
 
  - Add reset reasons for tracing what caused a TCP reset to be sent.
 
  - Introduce direction attribute for xfrm (IPSec) states.
    State can be used either for input or output packet processing.
 
 Things we sprinkled into general kernel code
 --------------------------------------------
 
  - Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().
    This required touch-ups and renaming of a few existing users.
 
  - Add Endian-dependent __counted_by_{le,be} annotations.
 
  - Make building selftests "quieter" by printing summaries like
    "CC object.o" rather than full commands with all the arguments.
 
 Netfilter
 ---------
 
  - Use GFP_KERNEL to clone elements, to deal better with OOM situations
    and avoid failures in the .commit step.
 
 BPF
 ---
 
  - Add eBPF JIT for ARCv2 CPUs.
 
  - Support attaching kprobe BPF programs through kprobe_multi link in
    a session mode, meaning, a BPF program is attached to both function entry
    and return, the entry program can decide if the return program gets
    executed and the entry program can share u64 cookie value with return
    program. "Session mode" is a common use-case for tetragon and bpftrace.
 
  - Add the ability to specify and retrieve BPF cookie for raw tracepoint
    programs in order to ease migration from classic to raw tracepoints.
 
  - Add an internal-only BPF per-CPU instruction for resolving per-CPU
    memory addresses and implement support in x86, ARM64 and RISC-V JITs.
    This allows inlining functions which need to access per-CPU state.
 
  - Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
    atomics in bpf_arena which can be JITed as a single x86 instruction.
    Support BPF arena on ARM64.
 
  - Add a new bpf_wq API for deferring events and refactor process-context
    bpf_timer code to keep common code where possible.
 
  - Harden the BPF verifier's and/or/xor value tracking.
 
  - Introduce crypto kfuncs to let BPF programs call kernel crypto APIs.
 
  - Support bpf_tail_call_static() helper for BPF programs with GCC 13.
 
  - Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
    program to have code sections where preemption is disabled.
 
 Driver API
 ----------
 
  - Skip software TC processing completely if all installed rules are
    marked as HW-only, instead of checking the HW-only flag rule by rule.
 
  - Add support for configuring PoE (Power over Ethernet), similar to
    the already existing support for PoDL (Power over Data Line) config.
 
  - Initial bits of a queue control API, for now allowing a single queue
    to be reset without disturbing packet flow to other queues.
 
  - Common (ethtool) statistics for hardware timestamping.
 
 Tests and tooling
 -----------------
 
  - Remove the need to create a config file to run the net forwarding tests
    so that a naive "make run_tests" can exercise them.
 
  - Define a method of writing tests which require an external endpoint
    to communicate with (to send/receive data towards the test machine).
    Add a few such tests.
 
  - Create a shared code library for writing Python tests. Expose the YAML
    Netlink library from tools/ to the tests for easy Netlink access.
 
  - Move netfilter tests under net/, extend them, separate performance tests
    from correctness tests, and iron out issues found by running them
    "on every commit".
 
  - Refactor BPF selftests to use common network helpers.
 
  - Further work filling in YAML definitions of Netlink messages for:
    nftables, team driver, bonding interfaces, vlan interfaces, VF info,
    TC u32 mark, TC police action.
 
  - Teach Python YAML Netlink to decode attribute policies.
 
  - Extend the definition of the "indexed array" construct in the specs
    to cover arrays of scalars rather than just nests.
 
  - Add hyperlinks between definitions in generated Netlink docs.
 
 Drivers
 -------
 
  - Make sure unsupported flower control flags are rejected by drivers,
    and make more drivers report errors directly to the application rather
    than dmesg (large number of driver changes from Asbjørn Sloth Tønnesen).
 
  - Ethernet high-speed NICs:
    - Broadcom (bnxt):
      - support multiple RSS contexts and steering traffic to them
      - support XDP metadata
      - make page pool allocations more NUMA aware
    - Intel (100G, ice, idpf):
      - extract datapath code common among Intel drivers into a library
      - use fewer resources in switchdev by sharing queues with the PF
      - add PFCP filter support
      - add Ethernet filter support
      - use a spinlock instead of HW lock in PTP clock ops
      - support 5 layer Tx scheduler topology
    - nVidia/Mellanox:
      - 800G link modes and 100G SerDes speeds
      - per-queue IRQ coalescing configuration
    - Marvell Octeon:
      - support offloading TC packet mark action
 
  - Ethernet NICs consumer, embedded and virtual:
    - stop lying about skb->truesize in USB Ethernet drivers, it messes up
      TCP memory calculations
    - Google cloud vNIC:
      - support changing ring size via ethtool
      - support ring reset using the queue control API
    - VirtIO net:
      - expose flow hash from RSS to XDP
      - per-queue statistics
      - add selftests
    - Synopsys (stmmac):
      - support controllers which require an RX clock signal from the MII
        bus to perform their hardware initialization
    - TI:
      - icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
      - icssg_prueth: add SW TX / RX Coalescing based on hrtimers
      - cpsw: minimal XDP support
    - Renesas (ravb):
      - support describing the MDIO bus
    - Realtek (r8169):
      - add support for RTL8168M
    - Microchip Sparx5:
      - matchall and flower actions mirred and redirect
 
  - Ethernet switches:
    - nVidia/Mellanox:
      - improve events processing performance
    - Marvell:
      - add support for MV88E6250 family internal PHYs
    - Microchip:
      - add DCB and DSCP mapping support for KSZ switches
      - vsc73xx: convert to PHYLINK
    - Realtek:
      - rtl8226b/rtl8221b: add C45 instances and SerDes switching
 
  - Many driver changes related to PHYLIB and PHYLINK deprecated API cleanup.
 
  - Ethernet PHYs:
    - Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
    - micrel: lan8814: add support for PPS out and external timestamp trigger
 
  - WiFi:
    - Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices drivers.
      Modern devices can only be configured using nl80211.
    - mac80211/cfg80211
      - handle color change per link for WiFi 7 Multi-Link Operation
    - Intel (iwlwifi):
      - don't support puncturing in 5 GHz
      - support monitor mode on passive channels
      - BZ-W device support
      - P2P with HE/EHT support
      - re-add support for firmware API 90
      - provide channel survey information for Automatic Channel Selection
    - MediaTek (mt76):
      - mt7921 LED control
      - mt7925 EHT radiotap support
      - mt7920e PCI support
    - Qualcomm (ath11k):
      - P2P support for QCA6390, WCN6855 and QCA2066
      - support hibernation
      - ieee80211-freq-limit Device Tree property support
    - Qualcomm (ath12k):
      - refactoring in preparation of multi-link support
      - suspend and hibernation support
      - ACPI support
      - debugfs support, including dfs_simulate_radar support
    - RealTek:
      - rtw88: RTL8723CS SDIO device support
      - rtw89: RTL8922AE Wi-Fi 7 PCI device support
      - rtw89: complete features of new WiFi 7 chip 8922AE including
        BT-coexistence and Wake-on-WLAN
      - rtw89: use BIOS ACPI settings to set TX power and channels
      - rtl8xxxu: enable Management Frame Protection (MFP) support
 
  - Bluetooth:
    - support for Intel BlazarI and Filmore Peak2 (BE201)
    - support for MediaTek MT7921S SDIO
    - initial support for Intel PCIe BT driver
    - remove HCI_AMP support
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmZD6sQACgkQMUZtbf5S
 IrtLYw/+I73ePGIye37o2jpbodcLAUZVfF3r6uYUzK8hokEcKD0QVJa9w7PizLZ3
 UO45ClOXFLJCkfP4reFenLfxGCel2AJI+F7VFl2xaO2XgrcH/lnVrHqKZEAEXjls
 KoYMnShIolv7h2MKP6hHtyTi2j1wvQUKsZC71o9/fuW+4fUT8gECx1YtYcL73wrw
 gEMdlUgBYC3jiiCUHJIFX6iPJ2t/TC+q1eIIF2K/Osrk2kIqQhzoozcL4vpuAZQT
 99ljx/qRelXa8oppDb7nM5eulg7WY8ZqxEfFZphTMC5nLEGzClxuOTTl2kDYI/D/
 UZmTWZDY+F5F0xvNk2gH84qVJXBOVDoobpT7hVA/tDuybobc/kvGDzRayEVqVzKj
 Q0tPlJs+xBZpkK5TVnxaFLJVOM+p1Xosxy3kNVXmuYNBvT/R89UbJiCrUKqKZF+L
 z/1mOYUv8UklHqYAeuJSptHvqJjTGa/fsEYP7dAUBbc1N2eVB8mzZ4mgU5rYXbtC
 E6UXXiWnoSRm8bmco9QmcWWoXt5UGEizHSJLz6t1R5Df/YmXhWlytll5aCwY1ksf
 FNoL7S4u7AZThL1Nwi7yUs4CAjhk/N4aOsk+41S0sALCx30BJuI6UdesAxJ0lu+Z
 fwCQYbs27y4p7mBLbkYwcQNxAxGm7PSK4yeyRIy2njiyV4qnLf8=
 =EsC2
 -----END PGP SIGNATURE-----

Merge tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Complete rework of garbage collection of AF_UNIX sockets.

     AF_UNIX is prone to forming reference count cycles due to fd
     passing functionality. New method based on Tarjan's Strongly
     Connected Components algorithm should be both faster and remove a
     lot of workarounds we accumulated over the years.

   - Add TCP fraglist GRO support, allowing chaining multiple TCP
     packets and forwarding them together. Useful for small switches /
     routers which lack basic checksum offload in some scenarios (e.g.
     PPPoE).

   - Support using SMP threads for handling packet backlog i.e. packet
     processing from software interfaces and old drivers which don't use
     NAPI. This helps move the processing out of the softirq jumble.

   - Continue work of converting from rtnl lock to RCU protection.

     Don't require rtnl lock when reading: IPv6 routing FIB, IPv6
     address labels, netdev threaded NAPI sysfs files, bonding driver's
     sysfs files, MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics,
     TC Qdiscs, neighbor entries, ARP entries via ioctl(SIOCGARP), a lot
     of the link information available via rtnetlink.

   - Small optimizations from Eric to UDP wake up handling, memory
     accounting, RPS/RFS implementation, TCP packet sizing etc.

   - Allow direct page recycling in the bulk API used by XDP, for +2%
     PPS.

   - Support peek with an offset on TCP sockets.

   - Add MPTCP APIs for querying last time packets were received/sent/acked
     and whether MPTCP "upgrade" succeeded on a TCP socket.

   - Add intra-node communication shortcut to improve SMC performance.

   - Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol
     driver.

   - Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.

   - Add reset reasons for tracing what caused a TCP reset to be sent.

   - Introduce direction attribute for xfrm (IPSec) states. State can be
     used either for input or output packet processing.

  Things we sprinkled into general kernel code:

   - Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().

     This required touch-ups and renaming of a few existing users.

   - Add Endian-dependent __counted_by_{le,be} annotations.

   - Make building selftests "quieter" by printing summaries like
     "CC object.o" rather than full commands with all the arguments.

  Netfilter:

   - Use GFP_KERNEL to clone elements, to deal better with OOM
     situations and avoid failures in the .commit step.

  BPF:

   - Add eBPF JIT for ARCv2 CPUs.

   - Support attaching kprobe BPF programs through kprobe_multi link in
     a session mode, meaning, a BPF program is attached to both function
     entry and return, the entry program can decide if the return
     program gets executed and the entry program can share u64 cookie
     value with return program. "Session mode" is a common use-case for
     tetragon and bpftrace.

   - Add the ability to specify and retrieve BPF cookie for raw
     tracepoint programs in order to ease migration from classic to raw
     tracepoints.

   - Add an internal-only BPF per-CPU instruction for resolving per-CPU
     memory addresses and implement support in x86, ARM64 and RISC-V
     JITs. This allows inlining functions which need to access per-CPU
     state.

   - Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
     atomics in bpf_arena which can be JITed as a single x86
     instruction. Support BPF arena on ARM64.

   - Add a new bpf_wq API for deferring events and refactor
     process-context bpf_timer code to keep common code where possible.

   - Harden the BPF verifier's and/or/xor value tracking.

   - Introduce crypto kfuncs to let BPF programs call kernel crypto
     APIs.

   - Support bpf_tail_call_static() helper for BPF programs with GCC 13.

   - Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
     program to have code sections where preemption is disabled.

  Driver API:

   - Skip software TC processing completely if all installed rules are
     marked as HW-only, instead of checking the HW-only flag rule by
     rule.

   - Add support for configuring PoE (Power over Ethernet), similar to
     the already existing support for PoDL (Power over Data Line)
     config.

   - Initial bits of a queue control API, for now allowing a single
     queue to be reset without disturbing packet flow to other queues.

   - Common (ethtool) statistics for hardware timestamping.

  Tests and tooling:

   - Remove the need to create a config file to run the net forwarding
     tests so that a naive "make run_tests" can exercise them.

   - Define a method of writing tests which require an external endpoint
     to communicate with (to send/receive data towards the test
     machine). Add a few such tests.

   - Create a shared code library for writing Python tests. Expose the
     YAML Netlink library from tools/ to the tests for easy Netlink
     access.

   - Move netfilter tests under net/, extend them, separate performance
     tests from correctness tests, and iron out issues found by running
     them "on every commit".

   - Refactor BPF selftests to use common network helpers.

   - Further work filling in YAML definitions of Netlink messages for:
     nftables, team driver, bonding interfaces, vlan interfaces, VF
     info, TC u32 mark, TC police action.

   - Teach Python YAML Netlink to decode attribute policies.

   - Extend the definition of the "indexed array" construct in the specs
     to cover arrays of scalars rather than just nests.

   - Add hyperlinks between definitions in generated Netlink docs.

  Drivers:

   - Make sure unsupported flower control flags are rejected by drivers,
     and make more drivers report errors directly to the application
     rather than dmesg (large number of driver changes from Asbjørn
     Sloth Tønnesen).

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - support multiple RSS contexts and steering traffic to them
         - support XDP metadata
         - make page pool allocations more NUMA aware
      - Intel (100G, ice, idpf):
         - extract datapath code common among Intel drivers into a library
         - use fewer resources in switchdev by sharing queues with the PF
         - add PFCP filter support
         - add Ethernet filter support
         - use a spinlock instead of HW lock in PTP clock ops
         - support 5 layer Tx scheduler topology
      - nVidia/Mellanox:
         - 800G link modes and 100G SerDes speeds
         - per-queue IRQ coalescing configuration
      - Marvell Octeon:
         - support offloading TC packet mark action

   - Ethernet NICs consumer, embedded and virtual:
      - stop lying about skb->truesize in USB Ethernet drivers, it
        messes up TCP memory calculations
      - Google cloud vNIC:
         - support changing ring size via ethtool
         - support ring reset using the queue control API
      - VirtIO net:
         - expose flow hash from RSS to XDP
         - per-queue statistics
         - add selftests
      - Synopsys (stmmac):
         - support controllers which require an RX clock signal from the
           MII bus to perform their hardware initialization
      - TI:
         - icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
         - icssg_prueth: add SW TX / RX Coalescing based on hrtimers
         - cpsw: minimal XDP support
      - Renesas (ravb):
         - support describing the MDIO bus
      - Realtek (r8169):
         - add support for RTL8168M
      - Microchip Sparx5:
         - matchall and flower actions mirred and redirect

   - Ethernet switches:
      - nVidia/Mellanox:
         - improve events processing performance
      - Marvell:
         - add support for MV88E6250 family internal PHYs
      - Microchip:
         - add DCB and DSCP mapping support for KSZ switches
         - vsc73xx: convert to PHYLINK
      - Realtek:
         - rtl8226b/rtl8221b: add C45 instances and SerDes switching

   - Many driver changes related to PHYLIB and PHYLINK deprecated API
     cleanup

   - Ethernet PHYs:
      - Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
      - micrel: lan8814: add support for PPS out and external timestamp trigger

   - WiFi:
      - Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices
        drivers. Modern devices can only be configured using nl80211.
      - mac80211/cfg80211
         - handle color change per link for WiFi 7 Multi-Link Operation
      - Intel (iwlwifi):
         - don't support puncturing in 5 GHz
         - support monitor mode on passive channels
         - BZ-W device support
         - P2P with HE/EHT support
         - re-add support for firmware API 90
         - provide channel survey information for Automatic Channel Selection
      - MediaTek (mt76):
         - mt7921 LED control
         - mt7925 EHT radiotap support
         - mt7920e PCI support
      - Qualcomm (ath11k):
         - P2P support for QCA6390, WCN6855 and QCA2066
         - support hibernation
         - ieee80211-freq-limit Device Tree property support
      - Qualcomm (ath12k):
         - refactoring in preparation of multi-link support
         - suspend and hibernation support
         - ACPI support
         - debugfs support, including dfs_simulate_radar support
      - RealTek:
         - rtw88: RTL8723CS SDIO device support
         - rtw89: RTL8922AE Wi-Fi 7 PCI device support
         - rtw89: complete features of new WiFi 7 chip 8922AE including
           BT-coexistence and Wake-on-WLAN
         - rtw89: use BIOS ACPI settings to set TX power and channels
         - rtl8xxxu: enable Management Frame Protection (MFP) support

   - Bluetooth:
      - support for Intel BlazarI and Filmore Peak2 (BE201)
      - support for MediaTek MT7921S SDIO
      - initial support for Intel PCIe BT driver
      - remove HCI_AMP support"

* tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1827 commits)
  selftests: netfilter: fix packetdrill conntrack testcase
  net: gro: fix napi_gro_cb zeroed alignment
  Bluetooth: btintel_pcie: Refactor and code cleanup
  Bluetooth: btintel_pcie: Fix warning reported by sparse
  Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1
  Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config
  Bluetooth: btintel_pcie: Fix compiler warnings
  Bluetooth: btintel_pcie: Add *setup* function to download firmware
  Bluetooth: btintel_pcie: Add support for PCIe transport
  Bluetooth: btintel: Export few static functions
  Bluetooth: HCI: Remove HCI_AMP support
  Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()
  Bluetooth: qca: Fix error code in qca_read_fw_build_info()
  Bluetooth: hci_conn: Use __counted_by() and avoid -Wfamnae warning
  Bluetooth: btintel: Add support for Filmore Peak2 (BE201)
  Bluetooth: btintel: Add support for BlazarI
  LE Create Connection command timeout increased to 20 secs
  dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth
  Bluetooth: compute LE flow credits based on recvbuf space
  Bluetooth: hci_sync: Use cmd->num_cis instead of magic number
  ...
2024-05-14 19:42:24 -07:00

1099 lines
28 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/* Copyright (c) 2019 Facebook */
#include <linux/hash.h>
#include <linux/bpf.h>
#include <linux/filter.h>
#include <linux/ftrace.h>
#include <linux/rbtree_latch.h>
#include <linux/perf_event.h>
#include <linux/btf.h>
#include <linux/rcupdate_trace.h>
#include <linux/rcupdate_wait.h>
#include <linux/static_call.h>
#include <linux/bpf_verifier.h>
#include <linux/bpf_lsm.h>
#include <linux/delay.h>
/* dummy _ops. The verifier will operate on target program's ops. */
const struct bpf_verifier_ops bpf_extension_verifier_ops = {
};
const struct bpf_prog_ops bpf_extension_prog_ops = {
};
/* btf_vmlinux has ~22k attachable functions. 1k htab is enough. */
#define TRAMPOLINE_HASH_BITS 10
#define TRAMPOLINE_TABLE_SIZE (1 << TRAMPOLINE_HASH_BITS)
static struct hlist_head trampoline_table[TRAMPOLINE_TABLE_SIZE];
/* serializes access to trampoline_table */
static DEFINE_MUTEX(trampoline_mutex);
#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
static int bpf_trampoline_update(struct bpf_trampoline *tr, bool lock_direct_mutex);
static int bpf_tramp_ftrace_ops_func(struct ftrace_ops *ops, enum ftrace_ops_cmd cmd)
{
struct bpf_trampoline *tr = ops->private;
int ret = 0;
if (cmd == FTRACE_OPS_CMD_ENABLE_SHARE_IPMODIFY_SELF) {
/* This is called inside register_ftrace_direct_multi(), so
* tr->mutex is already locked.
*/
lockdep_assert_held_once(&tr->mutex);
/* Instead of updating the trampoline here, we propagate
* -EAGAIN to register_ftrace_direct(). Then we can
* retry register_ftrace_direct() after updating the
* trampoline.
*/
if ((tr->flags & BPF_TRAMP_F_CALL_ORIG) &&
!(tr->flags & BPF_TRAMP_F_ORIG_STACK)) {
if (WARN_ON_ONCE(tr->flags & BPF_TRAMP_F_SHARE_IPMODIFY))
return -EBUSY;
tr->flags |= BPF_TRAMP_F_SHARE_IPMODIFY;
return -EAGAIN;
}
return 0;
}
/* The normal locking order is
* tr->mutex => direct_mutex (ftrace.c) => ftrace_lock (ftrace.c)
*
* The following two commands are called from
*
* prepare_direct_functions_for_ipmodify
* cleanup_direct_functions_after_ipmodify
*
* In both cases, direct_mutex is already locked. Use
* mutex_trylock(&tr->mutex) to avoid deadlock in race condition
* (something else is making changes to this same trampoline).
*/
if (!mutex_trylock(&tr->mutex)) {
/* sleep 1 ms to make sure whatever holding tr->mutex makes
* some progress.
*/
msleep(1);
return -EAGAIN;
}
switch (cmd) {
case FTRACE_OPS_CMD_ENABLE_SHARE_IPMODIFY_PEER:
tr->flags |= BPF_TRAMP_F_SHARE_IPMODIFY;
if ((tr->flags & BPF_TRAMP_F_CALL_ORIG) &&
!(tr->flags & BPF_TRAMP_F_ORIG_STACK))
ret = bpf_trampoline_update(tr, false /* lock_direct_mutex */);
break;
case FTRACE_OPS_CMD_DISABLE_SHARE_IPMODIFY_PEER:
tr->flags &= ~BPF_TRAMP_F_SHARE_IPMODIFY;
if (tr->flags & BPF_TRAMP_F_ORIG_STACK)
ret = bpf_trampoline_update(tr, false /* lock_direct_mutex */);
break;
default:
ret = -EINVAL;
break;
}
mutex_unlock(&tr->mutex);
return ret;
}
#endif
bool bpf_prog_has_trampoline(const struct bpf_prog *prog)
{
enum bpf_attach_type eatype = prog->expected_attach_type;
enum bpf_prog_type ptype = prog->type;
return (ptype == BPF_PROG_TYPE_TRACING &&
(eatype == BPF_TRACE_FENTRY || eatype == BPF_TRACE_FEXIT ||
eatype == BPF_MODIFY_RETURN)) ||
(ptype == BPF_PROG_TYPE_LSM && eatype == BPF_LSM_MAC);
}
void bpf_image_ksym_add(void *data, unsigned int size, struct bpf_ksym *ksym)
{
ksym->start = (unsigned long) data;
ksym->end = ksym->start + size;
bpf_ksym_add(ksym);
perf_event_ksymbol(PERF_RECORD_KSYMBOL_TYPE_BPF, ksym->start,
PAGE_SIZE, false, ksym->name);
}
void bpf_image_ksym_del(struct bpf_ksym *ksym)
{
bpf_ksym_del(ksym);
perf_event_ksymbol(PERF_RECORD_KSYMBOL_TYPE_BPF, ksym->start,
PAGE_SIZE, true, ksym->name);
}
static struct bpf_trampoline *bpf_trampoline_lookup(u64 key)
{
struct bpf_trampoline *tr;
struct hlist_head *head;
int i;
mutex_lock(&trampoline_mutex);
head = &trampoline_table[hash_64(key, TRAMPOLINE_HASH_BITS)];
hlist_for_each_entry(tr, head, hlist) {
if (tr->key == key) {
refcount_inc(&tr->refcnt);
goto out;
}
}
tr = kzalloc(sizeof(*tr), GFP_KERNEL);
if (!tr)
goto out;
#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
tr->fops = kzalloc(sizeof(struct ftrace_ops), GFP_KERNEL);
if (!tr->fops) {
kfree(tr);
tr = NULL;
goto out;
}
tr->fops->private = tr;
tr->fops->ops_func = bpf_tramp_ftrace_ops_func;
#endif
tr->key = key;
INIT_HLIST_NODE(&tr->hlist);
hlist_add_head(&tr->hlist, head);
refcount_set(&tr->refcnt, 1);
mutex_init(&tr->mutex);
for (i = 0; i < BPF_TRAMP_MAX; i++)
INIT_HLIST_HEAD(&tr->progs_hlist[i]);
out:
mutex_unlock(&trampoline_mutex);
return tr;
}
static int unregister_fentry(struct bpf_trampoline *tr, void *old_addr)
{
void *ip = tr->func.addr;
int ret;
if (tr->func.ftrace_managed)
ret = unregister_ftrace_direct(tr->fops, (long)old_addr, false);
else
ret = bpf_arch_text_poke(ip, BPF_MOD_CALL, old_addr, NULL);
return ret;
}
static int modify_fentry(struct bpf_trampoline *tr, void *old_addr, void *new_addr,
bool lock_direct_mutex)
{
void *ip = tr->func.addr;
int ret;
if (tr->func.ftrace_managed) {
if (lock_direct_mutex)
ret = modify_ftrace_direct(tr->fops, (long)new_addr);
else
ret = modify_ftrace_direct_nolock(tr->fops, (long)new_addr);
} else {
ret = bpf_arch_text_poke(ip, BPF_MOD_CALL, old_addr, new_addr);
}
return ret;
}
/* first time registering */
static int register_fentry(struct bpf_trampoline *tr, void *new_addr)
{
void *ip = tr->func.addr;
unsigned long faddr;
int ret;
faddr = ftrace_location((unsigned long)ip);
if (faddr) {
if (!tr->fops)
return -ENOTSUPP;
tr->func.ftrace_managed = true;
}
if (tr->func.ftrace_managed) {
ftrace_set_filter_ip(tr->fops, (unsigned long)ip, 0, 1);
ret = register_ftrace_direct(tr->fops, (long)new_addr);
} else {
ret = bpf_arch_text_poke(ip, BPF_MOD_CALL, NULL, new_addr);
}
return ret;
}
static struct bpf_tramp_links *
bpf_trampoline_get_progs(const struct bpf_trampoline *tr, int *total, bool *ip_arg)
{
struct bpf_tramp_link *link;
struct bpf_tramp_links *tlinks;
struct bpf_tramp_link **links;
int kind;
*total = 0;
tlinks = kcalloc(BPF_TRAMP_MAX, sizeof(*tlinks), GFP_KERNEL);
if (!tlinks)
return ERR_PTR(-ENOMEM);
for (kind = 0; kind < BPF_TRAMP_MAX; kind++) {
tlinks[kind].nr_links = tr->progs_cnt[kind];
*total += tr->progs_cnt[kind];
links = tlinks[kind].links;
hlist_for_each_entry(link, &tr->progs_hlist[kind], tramp_hlist) {
*ip_arg |= link->link.prog->call_get_func_ip;
*links++ = link;
}
}
return tlinks;
}
static void bpf_tramp_image_free(struct bpf_tramp_image *im)
{
bpf_image_ksym_del(&im->ksym);
arch_free_bpf_trampoline(im->image, im->size);
bpf_jit_uncharge_modmem(im->size);
percpu_ref_exit(&im->pcref);
kfree_rcu(im, rcu);
}
static void __bpf_tramp_image_put_deferred(struct work_struct *work)
{
struct bpf_tramp_image *im;
im = container_of(work, struct bpf_tramp_image, work);
bpf_tramp_image_free(im);
}
/* callback, fexit step 3 or fentry step 2 */
static void __bpf_tramp_image_put_rcu(struct rcu_head *rcu)
{
struct bpf_tramp_image *im;
im = container_of(rcu, struct bpf_tramp_image, rcu);
INIT_WORK(&im->work, __bpf_tramp_image_put_deferred);
schedule_work(&im->work);
}
/* callback, fexit step 2. Called after percpu_ref_kill confirms. */
static void __bpf_tramp_image_release(struct percpu_ref *pcref)
{
struct bpf_tramp_image *im;
im = container_of(pcref, struct bpf_tramp_image, pcref);
call_rcu_tasks(&im->rcu, __bpf_tramp_image_put_rcu);
}
/* callback, fexit or fentry step 1 */
static void __bpf_tramp_image_put_rcu_tasks(struct rcu_head *rcu)
{
struct bpf_tramp_image *im;
im = container_of(rcu, struct bpf_tramp_image, rcu);
if (im->ip_after_call)
/* the case of fmod_ret/fexit trampoline and CONFIG_PREEMPTION=y */
percpu_ref_kill(&im->pcref);
else
/* the case of fentry trampoline */
call_rcu_tasks(&im->rcu, __bpf_tramp_image_put_rcu);
}
static void bpf_tramp_image_put(struct bpf_tramp_image *im)
{
/* The trampoline image that calls original function is using:
* rcu_read_lock_trace to protect sleepable bpf progs
* rcu_read_lock to protect normal bpf progs
* percpu_ref to protect trampoline itself
* rcu tasks to protect trampoline asm not covered by percpu_ref
* (which are few asm insns before __bpf_tramp_enter and
* after __bpf_tramp_exit)
*
* The trampoline is unreachable before bpf_tramp_image_put().
*
* First, patch the trampoline to avoid calling into fexit progs.
* The progs will be freed even if the original function is still
* executing or sleeping.
* In case of CONFIG_PREEMPT=y use call_rcu_tasks() to wait on
* first few asm instructions to execute and call into
* __bpf_tramp_enter->percpu_ref_get.
* Then use percpu_ref_kill to wait for the trampoline and the original
* function to finish.
* Then use call_rcu_tasks() to make sure few asm insns in
* the trampoline epilogue are done as well.
*
* In !PREEMPT case the task that got interrupted in the first asm
* insns won't go through an RCU quiescent state which the
* percpu_ref_kill will be waiting for. Hence the first
* call_rcu_tasks() is not necessary.
*/
if (im->ip_after_call) {
int err = bpf_arch_text_poke(im->ip_after_call, BPF_MOD_JUMP,
NULL, im->ip_epilogue);
WARN_ON(err);
if (IS_ENABLED(CONFIG_TASKS_RCU))
call_rcu_tasks(&im->rcu, __bpf_tramp_image_put_rcu_tasks);
else
percpu_ref_kill(&im->pcref);
return;
}
/* The trampoline without fexit and fmod_ret progs doesn't call original
* function and doesn't use percpu_ref.
* Use call_rcu_tasks_trace() to wait for sleepable progs to finish.
* Then use call_rcu_tasks() to wait for the rest of trampoline asm
* and normal progs.
*/
call_rcu_tasks_trace(&im->rcu, __bpf_tramp_image_put_rcu_tasks);
}
static struct bpf_tramp_image *bpf_tramp_image_alloc(u64 key, int size)
{
struct bpf_tramp_image *im;
struct bpf_ksym *ksym;
void *image;
int err = -ENOMEM;
im = kzalloc(sizeof(*im), GFP_KERNEL);
if (!im)
goto out;
err = bpf_jit_charge_modmem(size);
if (err)
goto out_free_im;
im->size = size;
err = -ENOMEM;
im->image = image = arch_alloc_bpf_trampoline(size);
if (!image)
goto out_uncharge;
err = percpu_ref_init(&im->pcref, __bpf_tramp_image_release, 0, GFP_KERNEL);
if (err)
goto out_free_image;
ksym = &im->ksym;
INIT_LIST_HEAD_RCU(&ksym->lnode);
snprintf(ksym->name, KSYM_NAME_LEN, "bpf_trampoline_%llu", key);
bpf_image_ksym_add(image, size, ksym);
return im;
out_free_image:
arch_free_bpf_trampoline(im->image, im->size);
out_uncharge:
bpf_jit_uncharge_modmem(size);
out_free_im:
kfree(im);
out:
return ERR_PTR(err);
}
static int bpf_trampoline_update(struct bpf_trampoline *tr, bool lock_direct_mutex)
{
struct bpf_tramp_image *im;
struct bpf_tramp_links *tlinks;
u32 orig_flags = tr->flags;
bool ip_arg = false;
int err, total, size;
tlinks = bpf_trampoline_get_progs(tr, &total, &ip_arg);
if (IS_ERR(tlinks))
return PTR_ERR(tlinks);
if (total == 0) {
err = unregister_fentry(tr, tr->cur_image->image);
bpf_tramp_image_put(tr->cur_image);
tr->cur_image = NULL;
goto out;
}
/* clear all bits except SHARE_IPMODIFY and TAIL_CALL_CTX */
tr->flags &= (BPF_TRAMP_F_SHARE_IPMODIFY | BPF_TRAMP_F_TAIL_CALL_CTX);
if (tlinks[BPF_TRAMP_FEXIT].nr_links ||
tlinks[BPF_TRAMP_MODIFY_RETURN].nr_links) {
/* NOTE: BPF_TRAMP_F_RESTORE_REGS and BPF_TRAMP_F_SKIP_FRAME
* should not be set together.
*/
tr->flags |= BPF_TRAMP_F_CALL_ORIG | BPF_TRAMP_F_SKIP_FRAME;
} else {
tr->flags |= BPF_TRAMP_F_RESTORE_REGS;
}
if (ip_arg)
tr->flags |= BPF_TRAMP_F_IP_ARG;
#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
again:
if ((tr->flags & BPF_TRAMP_F_SHARE_IPMODIFY) &&
(tr->flags & BPF_TRAMP_F_CALL_ORIG))
tr->flags |= BPF_TRAMP_F_ORIG_STACK;
#endif
size = arch_bpf_trampoline_size(&tr->func.model, tr->flags,
tlinks, tr->func.addr);
if (size < 0) {
err = size;
goto out;
}
if (size > PAGE_SIZE) {
err = -E2BIG;
goto out;
}
im = bpf_tramp_image_alloc(tr->key, size);
if (IS_ERR(im)) {
err = PTR_ERR(im);
goto out;
}
err = arch_prepare_bpf_trampoline(im, im->image, im->image + size,
&tr->func.model, tr->flags, tlinks,
tr->func.addr);
if (err < 0)
goto out_free;
err = arch_protect_bpf_trampoline(im->image, im->size);
if (err)
goto out_free;
WARN_ON(tr->cur_image && total == 0);
if (tr->cur_image)
/* progs already running at this address */
err = modify_fentry(tr, tr->cur_image->image, im->image, lock_direct_mutex);
else
/* first time registering */
err = register_fentry(tr, im->image);
#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
if (err == -EAGAIN) {
/* -EAGAIN from bpf_tramp_ftrace_ops_func. Now
* BPF_TRAMP_F_SHARE_IPMODIFY is set, we can generate the
* trampoline again, and retry register.
*/
/* reset fops->func and fops->trampoline for re-register */
tr->fops->func = NULL;
tr->fops->trampoline = 0;
/* free im memory and reallocate later */
bpf_tramp_image_free(im);
goto again;
}
#endif
if (err)
goto out_free;
if (tr->cur_image)
bpf_tramp_image_put(tr->cur_image);
tr->cur_image = im;
out:
/* If any error happens, restore previous flags */
if (err)
tr->flags = orig_flags;
kfree(tlinks);
return err;
out_free:
bpf_tramp_image_free(im);
goto out;
}
static enum bpf_tramp_prog_type bpf_attach_type_to_tramp(struct bpf_prog *prog)
{
switch (prog->expected_attach_type) {
case BPF_TRACE_FENTRY:
return BPF_TRAMP_FENTRY;
case BPF_MODIFY_RETURN:
return BPF_TRAMP_MODIFY_RETURN;
case BPF_TRACE_FEXIT:
return BPF_TRAMP_FEXIT;
case BPF_LSM_MAC:
if (!prog->aux->attach_func_proto->type)
/* The function returns void, we cannot modify its
* return value.
*/
return BPF_TRAMP_FEXIT;
else
return BPF_TRAMP_MODIFY_RETURN;
default:
return BPF_TRAMP_REPLACE;
}
}
static int __bpf_trampoline_link_prog(struct bpf_tramp_link *link, struct bpf_trampoline *tr)
{
enum bpf_tramp_prog_type kind;
struct bpf_tramp_link *link_exiting;
int err = 0;
int cnt = 0, i;
kind = bpf_attach_type_to_tramp(link->link.prog);
if (tr->extension_prog)
/* cannot attach fentry/fexit if extension prog is attached.
* cannot overwrite extension prog either.
*/
return -EBUSY;
for (i = 0; i < BPF_TRAMP_MAX; i++)
cnt += tr->progs_cnt[i];
if (kind == BPF_TRAMP_REPLACE) {
/* Cannot attach extension if fentry/fexit are in use. */
if (cnt)
return -EBUSY;
tr->extension_prog = link->link.prog;
return bpf_arch_text_poke(tr->func.addr, BPF_MOD_JUMP, NULL,
link->link.prog->bpf_func);
}
if (cnt >= BPF_MAX_TRAMP_LINKS)
return -E2BIG;
if (!hlist_unhashed(&link->tramp_hlist))
/* prog already linked */
return -EBUSY;
hlist_for_each_entry(link_exiting, &tr->progs_hlist[kind], tramp_hlist) {
if (link_exiting->link.prog != link->link.prog)
continue;
/* prog already linked */
return -EBUSY;
}
hlist_add_head(&link->tramp_hlist, &tr->progs_hlist[kind]);
tr->progs_cnt[kind]++;
err = bpf_trampoline_update(tr, true /* lock_direct_mutex */);
if (err) {
hlist_del_init(&link->tramp_hlist);
tr->progs_cnt[kind]--;
}
return err;
}
int bpf_trampoline_link_prog(struct bpf_tramp_link *link, struct bpf_trampoline *tr)
{
int err;
mutex_lock(&tr->mutex);
err = __bpf_trampoline_link_prog(link, tr);
mutex_unlock(&tr->mutex);
return err;
}
static int __bpf_trampoline_unlink_prog(struct bpf_tramp_link *link, struct bpf_trampoline *tr)
{
enum bpf_tramp_prog_type kind;
int err;
kind = bpf_attach_type_to_tramp(link->link.prog);
if (kind == BPF_TRAMP_REPLACE) {
WARN_ON_ONCE(!tr->extension_prog);
err = bpf_arch_text_poke(tr->func.addr, BPF_MOD_JUMP,
tr->extension_prog->bpf_func, NULL);
tr->extension_prog = NULL;
return err;
}
hlist_del_init(&link->tramp_hlist);
tr->progs_cnt[kind]--;
return bpf_trampoline_update(tr, true /* lock_direct_mutex */);
}
/* bpf_trampoline_unlink_prog() should never fail. */
int bpf_trampoline_unlink_prog(struct bpf_tramp_link *link, struct bpf_trampoline *tr)
{
int err;
mutex_lock(&tr->mutex);
err = __bpf_trampoline_unlink_prog(link, tr);
mutex_unlock(&tr->mutex);
return err;
}
#if defined(CONFIG_CGROUP_BPF) && defined(CONFIG_BPF_LSM)
static void bpf_shim_tramp_link_release(struct bpf_link *link)
{
struct bpf_shim_tramp_link *shim_link =
container_of(link, struct bpf_shim_tramp_link, link.link);
/* paired with 'shim_link->trampoline = tr' in bpf_trampoline_link_cgroup_shim */
if (!shim_link->trampoline)
return;
WARN_ON_ONCE(bpf_trampoline_unlink_prog(&shim_link->link, shim_link->trampoline));
bpf_trampoline_put(shim_link->trampoline);
}
static void bpf_shim_tramp_link_dealloc(struct bpf_link *link)
{
struct bpf_shim_tramp_link *shim_link =
container_of(link, struct bpf_shim_tramp_link, link.link);
kfree(shim_link);
}
static const struct bpf_link_ops bpf_shim_tramp_link_lops = {
.release = bpf_shim_tramp_link_release,
.dealloc = bpf_shim_tramp_link_dealloc,
};
static struct bpf_shim_tramp_link *cgroup_shim_alloc(const struct bpf_prog *prog,
bpf_func_t bpf_func,
int cgroup_atype)
{
struct bpf_shim_tramp_link *shim_link = NULL;
struct bpf_prog *p;
shim_link = kzalloc(sizeof(*shim_link), GFP_USER);
if (!shim_link)
return NULL;
p = bpf_prog_alloc(1, 0);
if (!p) {
kfree(shim_link);
return NULL;
}
p->jited = false;
p->bpf_func = bpf_func;
p->aux->cgroup_atype = cgroup_atype;
p->aux->attach_func_proto = prog->aux->attach_func_proto;
p->aux->attach_btf_id = prog->aux->attach_btf_id;
p->aux->attach_btf = prog->aux->attach_btf;
btf_get(p->aux->attach_btf);
p->type = BPF_PROG_TYPE_LSM;
p->expected_attach_type = BPF_LSM_MAC;
bpf_prog_inc(p);
bpf_link_init(&shim_link->link.link, BPF_LINK_TYPE_UNSPEC,
&bpf_shim_tramp_link_lops, p);
bpf_cgroup_atype_get(p->aux->attach_btf_id, cgroup_atype);
return shim_link;
}
static struct bpf_shim_tramp_link *cgroup_shim_find(struct bpf_trampoline *tr,
bpf_func_t bpf_func)
{
struct bpf_tramp_link *link;
int kind;
for (kind = 0; kind < BPF_TRAMP_MAX; kind++) {
hlist_for_each_entry(link, &tr->progs_hlist[kind], tramp_hlist) {
struct bpf_prog *p = link->link.prog;
if (p->bpf_func == bpf_func)
return container_of(link, struct bpf_shim_tramp_link, link);
}
}
return NULL;
}
int bpf_trampoline_link_cgroup_shim(struct bpf_prog *prog,
int cgroup_atype)
{
struct bpf_shim_tramp_link *shim_link = NULL;
struct bpf_attach_target_info tgt_info = {};
struct bpf_trampoline *tr;
bpf_func_t bpf_func;
u64 key;
int err;
err = bpf_check_attach_target(NULL, prog, NULL,
prog->aux->attach_btf_id,
&tgt_info);
if (err)
return err;
key = bpf_trampoline_compute_key(NULL, prog->aux->attach_btf,
prog->aux->attach_btf_id);
bpf_lsm_find_cgroup_shim(prog, &bpf_func);
tr = bpf_trampoline_get(key, &tgt_info);
if (!tr)
return -ENOMEM;
mutex_lock(&tr->mutex);
shim_link = cgroup_shim_find(tr, bpf_func);
if (shim_link) {
/* Reusing existing shim attached by the other program. */
bpf_link_inc(&shim_link->link.link);
mutex_unlock(&tr->mutex);
bpf_trampoline_put(tr); /* bpf_trampoline_get above */
return 0;
}
/* Allocate and install new shim. */
shim_link = cgroup_shim_alloc(prog, bpf_func, cgroup_atype);
if (!shim_link) {
err = -ENOMEM;
goto err;
}
err = __bpf_trampoline_link_prog(&shim_link->link, tr);
if (err)
goto err;
shim_link->trampoline = tr;
/* note, we're still holding tr refcnt from above */
mutex_unlock(&tr->mutex);
return 0;
err:
mutex_unlock(&tr->mutex);
if (shim_link)
bpf_link_put(&shim_link->link.link);
/* have to release tr while _not_ holding its mutex */
bpf_trampoline_put(tr); /* bpf_trampoline_get above */
return err;
}
void bpf_trampoline_unlink_cgroup_shim(struct bpf_prog *prog)
{
struct bpf_shim_tramp_link *shim_link = NULL;
struct bpf_trampoline *tr;
bpf_func_t bpf_func;
u64 key;
key = bpf_trampoline_compute_key(NULL, prog->aux->attach_btf,
prog->aux->attach_btf_id);
bpf_lsm_find_cgroup_shim(prog, &bpf_func);
tr = bpf_trampoline_lookup(key);
if (WARN_ON_ONCE(!tr))
return;
mutex_lock(&tr->mutex);
shim_link = cgroup_shim_find(tr, bpf_func);
mutex_unlock(&tr->mutex);
if (shim_link)
bpf_link_put(&shim_link->link.link);
bpf_trampoline_put(tr); /* bpf_trampoline_lookup above */
}
#endif
struct bpf_trampoline *bpf_trampoline_get(u64 key,
struct bpf_attach_target_info *tgt_info)
{
struct bpf_trampoline *tr;
tr = bpf_trampoline_lookup(key);
if (!tr)
return NULL;
mutex_lock(&tr->mutex);
if (tr->func.addr)
goto out;
memcpy(&tr->func.model, &tgt_info->fmodel, sizeof(tgt_info->fmodel));
tr->func.addr = (void *)tgt_info->tgt_addr;
out:
mutex_unlock(&tr->mutex);
return tr;
}
void bpf_trampoline_put(struct bpf_trampoline *tr)
{
int i;
if (!tr)
return;
mutex_lock(&trampoline_mutex);
if (!refcount_dec_and_test(&tr->refcnt))
goto out;
WARN_ON_ONCE(mutex_is_locked(&tr->mutex));
for (i = 0; i < BPF_TRAMP_MAX; i++)
if (WARN_ON_ONCE(!hlist_empty(&tr->progs_hlist[i])))
goto out;
/* This code will be executed even when the last bpf_tramp_image
* is alive. All progs are detached from the trampoline and the
* trampoline image is patched with jmp into epilogue to skip
* fexit progs. The fentry-only trampoline will be freed via
* multiple rcu callbacks.
*/
hlist_del(&tr->hlist);
if (tr->fops) {
ftrace_free_filter(tr->fops);
kfree(tr->fops);
}
kfree(tr);
out:
mutex_unlock(&trampoline_mutex);
}
#define NO_START_TIME 1
static __always_inline u64 notrace bpf_prog_start_time(void)
{
u64 start = NO_START_TIME;
if (static_branch_unlikely(&bpf_stats_enabled_key)) {
start = sched_clock();
if (unlikely(!start))
start = NO_START_TIME;
}
return start;
}
/* The logic is similar to bpf_prog_run(), but with an explicit
* rcu_read_lock() and migrate_disable() which are required
* for the trampoline. The macro is split into
* call __bpf_prog_enter
* call prog->bpf_func
* call __bpf_prog_exit
*
* __bpf_prog_enter returns:
* 0 - skip execution of the bpf prog
* 1 - execute bpf prog
* [2..MAX_U64] - execute bpf prog and record execution time.
* This is start time.
*/
static u64 notrace __bpf_prog_enter_recur(struct bpf_prog *prog, struct bpf_tramp_run_ctx *run_ctx)
__acquires(RCU)
{
rcu_read_lock();
migrate_disable();
run_ctx->saved_run_ctx = bpf_set_run_ctx(&run_ctx->run_ctx);
if (unlikely(this_cpu_inc_return(*(prog->active)) != 1)) {
bpf_prog_inc_misses_counter(prog);
return 0;
}
return bpf_prog_start_time();
}
static void notrace update_prog_stats(struct bpf_prog *prog,
u64 start)
{
struct bpf_prog_stats *stats;
if (static_branch_unlikely(&bpf_stats_enabled_key) &&
/* static_key could be enabled in __bpf_prog_enter*
* and disabled in __bpf_prog_exit*.
* And vice versa.
* Hence check that 'start' is valid.
*/
start > NO_START_TIME) {
u64 duration = sched_clock() - start;
unsigned long flags;
stats = this_cpu_ptr(prog->stats);
flags = u64_stats_update_begin_irqsave(&stats->syncp);
u64_stats_inc(&stats->cnt);
u64_stats_add(&stats->nsecs, duration);
u64_stats_update_end_irqrestore(&stats->syncp, flags);
}
}
static void notrace __bpf_prog_exit_recur(struct bpf_prog *prog, u64 start,
struct bpf_tramp_run_ctx *run_ctx)
__releases(RCU)
{
bpf_reset_run_ctx(run_ctx->saved_run_ctx);
update_prog_stats(prog, start);
this_cpu_dec(*(prog->active));
migrate_enable();
rcu_read_unlock();
}
static u64 notrace __bpf_prog_enter_lsm_cgroup(struct bpf_prog *prog,
struct bpf_tramp_run_ctx *run_ctx)
__acquires(RCU)
{
/* Runtime stats are exported via actual BPF_LSM_CGROUP
* programs, not the shims.
*/
rcu_read_lock();
migrate_disable();
run_ctx->saved_run_ctx = bpf_set_run_ctx(&run_ctx->run_ctx);
return NO_START_TIME;
}
static void notrace __bpf_prog_exit_lsm_cgroup(struct bpf_prog *prog, u64 start,
struct bpf_tramp_run_ctx *run_ctx)
__releases(RCU)
{
bpf_reset_run_ctx(run_ctx->saved_run_ctx);
migrate_enable();
rcu_read_unlock();
}
u64 notrace __bpf_prog_enter_sleepable_recur(struct bpf_prog *prog,
struct bpf_tramp_run_ctx *run_ctx)
{
rcu_read_lock_trace();
migrate_disable();
might_fault();
run_ctx->saved_run_ctx = bpf_set_run_ctx(&run_ctx->run_ctx);
if (unlikely(this_cpu_inc_return(*(prog->active)) != 1)) {
bpf_prog_inc_misses_counter(prog);
return 0;
}
return bpf_prog_start_time();
}
void notrace __bpf_prog_exit_sleepable_recur(struct bpf_prog *prog, u64 start,
struct bpf_tramp_run_ctx *run_ctx)
{
bpf_reset_run_ctx(run_ctx->saved_run_ctx);
update_prog_stats(prog, start);
this_cpu_dec(*(prog->active));
migrate_enable();
rcu_read_unlock_trace();
}
static u64 notrace __bpf_prog_enter_sleepable(struct bpf_prog *prog,
struct bpf_tramp_run_ctx *run_ctx)
{
rcu_read_lock_trace();
migrate_disable();
might_fault();
run_ctx->saved_run_ctx = bpf_set_run_ctx(&run_ctx->run_ctx);
return bpf_prog_start_time();
}
static void notrace __bpf_prog_exit_sleepable(struct bpf_prog *prog, u64 start,
struct bpf_tramp_run_ctx *run_ctx)
{
bpf_reset_run_ctx(run_ctx->saved_run_ctx);
update_prog_stats(prog, start);
migrate_enable();
rcu_read_unlock_trace();
}
static u64 notrace __bpf_prog_enter(struct bpf_prog *prog,
struct bpf_tramp_run_ctx *run_ctx)
__acquires(RCU)
{
rcu_read_lock();
migrate_disable();
run_ctx->saved_run_ctx = bpf_set_run_ctx(&run_ctx->run_ctx);
return bpf_prog_start_time();
}
static void notrace __bpf_prog_exit(struct bpf_prog *prog, u64 start,
struct bpf_tramp_run_ctx *run_ctx)
__releases(RCU)
{
bpf_reset_run_ctx(run_ctx->saved_run_ctx);
update_prog_stats(prog, start);
migrate_enable();
rcu_read_unlock();
}
void notrace __bpf_tramp_enter(struct bpf_tramp_image *tr)
{
percpu_ref_get(&tr->pcref);
}
void notrace __bpf_tramp_exit(struct bpf_tramp_image *tr)
{
percpu_ref_put(&tr->pcref);
}
bpf_trampoline_enter_t bpf_trampoline_enter(const struct bpf_prog *prog)
{
bool sleepable = prog->sleepable;
if (bpf_prog_check_recur(prog))
return sleepable ? __bpf_prog_enter_sleepable_recur :
__bpf_prog_enter_recur;
if (resolve_prog_type(prog) == BPF_PROG_TYPE_LSM &&
prog->expected_attach_type == BPF_LSM_CGROUP)
return __bpf_prog_enter_lsm_cgroup;
return sleepable ? __bpf_prog_enter_sleepable : __bpf_prog_enter;
}
bpf_trampoline_exit_t bpf_trampoline_exit(const struct bpf_prog *prog)
{
bool sleepable = prog->sleepable;
if (bpf_prog_check_recur(prog))
return sleepable ? __bpf_prog_exit_sleepable_recur :
__bpf_prog_exit_recur;
if (resolve_prog_type(prog) == BPF_PROG_TYPE_LSM &&
prog->expected_attach_type == BPF_LSM_CGROUP)
return __bpf_prog_exit_lsm_cgroup;
return sleepable ? __bpf_prog_exit_sleepable : __bpf_prog_exit;
}
int __weak
arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image, void *image_end,
const struct btf_func_model *m, u32 flags,
struct bpf_tramp_links *tlinks,
void *func_addr)
{
return -ENOTSUPP;
}
void * __weak arch_alloc_bpf_trampoline(unsigned int size)
{
void *image;
if (WARN_ON_ONCE(size > PAGE_SIZE))
return NULL;
image = bpf_jit_alloc_exec(PAGE_SIZE);
if (image)
set_vm_flush_reset_perms(image);
return image;
}
void __weak arch_free_bpf_trampoline(void *image, unsigned int size)
{
WARN_ON_ONCE(size > PAGE_SIZE);
/* bpf_jit_free_exec doesn't need "size", but
* bpf_prog_pack_free() needs it.
*/
bpf_jit_free_exec(image);
}
int __weak arch_protect_bpf_trampoline(void *image, unsigned int size)
{
WARN_ON_ONCE(size > PAGE_SIZE);
return set_memory_rox((long)image, 1);
}
int __weak arch_bpf_trampoline_size(const struct btf_func_model *m, u32 flags,
struct bpf_tramp_links *tlinks, void *func_addr)
{
return -ENOTSUPP;
}
static int __init init_trampolines(void)
{
int i;
for (i = 0; i < TRAMPOLINE_TABLE_SIZE; i++)
INIT_HLIST_HEAD(&trampoline_table[i]);
return 0;
}
late_initcall(init_trampolines);