cc4cbd4b4f
These drivers don't use the driver_data member of struct i2c_device_id, so don't explicitly initialize this member. This prepares putting driver_data in an anonymous union which requires either no initialization or named designators. But it's also a nice cleanup on its own. While add it, also remove commas after the sentinel entries. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
1369 lines
34 KiB
C
1369 lines
34 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Driver for the MaxLinear MxL69x family of combo tuners/demods
|
|
*
|
|
* Copyright (C) 2020 Brad Love <brad@nextdimension.cc>
|
|
*
|
|
* based on code:
|
|
* Copyright (c) 2016 MaxLinear, Inc. All rights reserved
|
|
* which was released under GPL V2
|
|
*/
|
|
|
|
#include <linux/mutex.h>
|
|
#include <linux/i2c-mux.h>
|
|
#include <linux/string.h>
|
|
#include <linux/firmware.h>
|
|
|
|
#include "mxl692.h"
|
|
#include "mxl692_defs.h"
|
|
|
|
static const struct dvb_frontend_ops mxl692_ops;
|
|
|
|
struct mxl692_dev {
|
|
struct dvb_frontend fe;
|
|
struct i2c_client *i2c_client;
|
|
struct mutex i2c_lock; /* i2c command mutex */
|
|
enum MXL_EAGLE_DEMOD_TYPE_E demod_type;
|
|
enum MXL_EAGLE_POWER_MODE_E power_mode;
|
|
u32 current_frequency;
|
|
int device_type;
|
|
int seqnum;
|
|
int init_done;
|
|
};
|
|
|
|
static int mxl692_i2c_write(struct mxl692_dev *dev, u8 *buffer, u16 buf_len)
|
|
{
|
|
int ret = 0;
|
|
struct i2c_msg msg = {
|
|
.addr = dev->i2c_client->addr,
|
|
.flags = 0,
|
|
.buf = buffer,
|
|
.len = buf_len
|
|
};
|
|
|
|
ret = i2c_transfer(dev->i2c_client->adapter, &msg, 1);
|
|
if (ret != 1)
|
|
dev_dbg(&dev->i2c_client->dev, "i2c write error!\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mxl692_i2c_read(struct mxl692_dev *dev, u8 *buffer, u16 buf_len)
|
|
{
|
|
int ret = 0;
|
|
struct i2c_msg msg = {
|
|
.addr = dev->i2c_client->addr,
|
|
.flags = I2C_M_RD,
|
|
.buf = buffer,
|
|
.len = buf_len
|
|
};
|
|
|
|
ret = i2c_transfer(dev->i2c_client->adapter, &msg, 1);
|
|
if (ret != 1)
|
|
dev_dbg(&dev->i2c_client->dev, "i2c read error!\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int convert_endian(u32 size, u8 *d)
|
|
{
|
|
u32 i;
|
|
|
|
for (i = 0; i < (size & ~3); i += 4) {
|
|
d[i + 0] ^= d[i + 3];
|
|
d[i + 3] ^= d[i + 0];
|
|
d[i + 0] ^= d[i + 3];
|
|
|
|
d[i + 1] ^= d[i + 2];
|
|
d[i + 2] ^= d[i + 1];
|
|
d[i + 1] ^= d[i + 2];
|
|
}
|
|
|
|
switch (size & 3) {
|
|
case 0:
|
|
case 1:
|
|
/* do nothing */
|
|
break;
|
|
case 2:
|
|
d[i + 0] ^= d[i + 1];
|
|
d[i + 1] ^= d[i + 0];
|
|
d[i + 0] ^= d[i + 1];
|
|
break;
|
|
|
|
case 3:
|
|
d[i + 0] ^= d[i + 2];
|
|
d[i + 2] ^= d[i + 0];
|
|
d[i + 0] ^= d[i + 2];
|
|
break;
|
|
}
|
|
return size;
|
|
}
|
|
|
|
static int convert_endian_n(int n, u32 size, u8 *d)
|
|
{
|
|
int i, count = 0;
|
|
|
|
for (i = 0; i < n; i += size)
|
|
count += convert_endian(size, d + i);
|
|
return count;
|
|
}
|
|
|
|
static void mxl692_tx_swap(enum MXL_EAGLE_OPCODE_E opcode, u8 *buffer)
|
|
{
|
|
#ifdef __BIG_ENDIAN
|
|
return;
|
|
#endif
|
|
buffer += MXL_EAGLE_HOST_MSG_HEADER_SIZE; /* skip API header */
|
|
|
|
switch (opcode) {
|
|
case MXL_EAGLE_OPCODE_DEVICE_INTR_MASK_SET:
|
|
case MXL_EAGLE_OPCODE_TUNER_CHANNEL_TUNE_SET:
|
|
case MXL_EAGLE_OPCODE_SMA_TRANSMIT_SET:
|
|
buffer += convert_endian(sizeof(u32), buffer);
|
|
break;
|
|
case MXL_EAGLE_OPCODE_QAM_PARAMS_SET:
|
|
buffer += 5;
|
|
buffer += convert_endian(2 * sizeof(u32), buffer);
|
|
break;
|
|
default:
|
|
/* no swapping - all get opcodes */
|
|
/* ATSC/OOB no swapping */
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void mxl692_rx_swap(enum MXL_EAGLE_OPCODE_E opcode, u8 *buffer)
|
|
{
|
|
#ifdef __BIG_ENDIAN
|
|
return;
|
|
#endif
|
|
buffer += MXL_EAGLE_HOST_MSG_HEADER_SIZE; /* skip API header */
|
|
|
|
switch (opcode) {
|
|
case MXL_EAGLE_OPCODE_TUNER_AGC_STATUS_GET:
|
|
buffer++;
|
|
buffer += convert_endian(2 * sizeof(u16), buffer);
|
|
break;
|
|
case MXL_EAGLE_OPCODE_ATSC_STATUS_GET:
|
|
buffer += convert_endian_n(2, sizeof(u16), buffer);
|
|
buffer += convert_endian(sizeof(u32), buffer);
|
|
break;
|
|
case MXL_EAGLE_OPCODE_ATSC_ERROR_COUNTERS_GET:
|
|
buffer += convert_endian(3 * sizeof(u32), buffer);
|
|
break;
|
|
case MXL_EAGLE_OPCODE_ATSC_EQUALIZER_FILTER_FFE_TAPS_GET:
|
|
buffer += convert_endian_n(24, sizeof(u16), buffer);
|
|
break;
|
|
case MXL_EAGLE_OPCODE_QAM_STATUS_GET:
|
|
buffer += 8;
|
|
buffer += convert_endian_n(2, sizeof(u16), buffer);
|
|
buffer += convert_endian(sizeof(u32), buffer);
|
|
break;
|
|
case MXL_EAGLE_OPCODE_QAM_ERROR_COUNTERS_GET:
|
|
buffer += convert_endian(7 * sizeof(u32), buffer);
|
|
break;
|
|
case MXL_EAGLE_OPCODE_QAM_CONSTELLATION_VALUE_GET:
|
|
case MXL_EAGLE_OPCODE_QAM_EQUALIZER_FILTER_DFE_START_GET:
|
|
case MXL_EAGLE_OPCODE_QAM_EQUALIZER_FILTER_DFE_MIDDLE_GET:
|
|
case MXL_EAGLE_OPCODE_QAM_EQUALIZER_FILTER_DFE_END_GET:
|
|
case MXL_EAGLE_OPCODE_QAM_EQUALIZER_FILTER_SPUR_START_GET:
|
|
buffer += convert_endian_n(24, sizeof(u16), buffer);
|
|
break;
|
|
case MXL_EAGLE_OPCODE_QAM_EQUALIZER_FILTER_SPUR_END_GET:
|
|
buffer += convert_endian_n(8, sizeof(u16), buffer);
|
|
break;
|
|
case MXL_EAGLE_OPCODE_QAM_EQUALIZER_FILTER_FFE_GET:
|
|
buffer += convert_endian_n(17, sizeof(u16), buffer);
|
|
break;
|
|
case MXL_EAGLE_OPCODE_OOB_ERROR_COUNTERS_GET:
|
|
buffer += convert_endian(3 * sizeof(u32), buffer);
|
|
break;
|
|
case MXL_EAGLE_OPCODE_OOB_STATUS_GET:
|
|
buffer += convert_endian_n(2, sizeof(u16), buffer);
|
|
buffer += convert_endian(sizeof(u32), buffer);
|
|
break;
|
|
case MXL_EAGLE_OPCODE_SMA_RECEIVE_GET:
|
|
buffer += convert_endian(sizeof(u32), buffer);
|
|
break;
|
|
default:
|
|
/* no swapping - all set opcodes */
|
|
break;
|
|
}
|
|
}
|
|
|
|
static u32 mxl692_checksum(u8 *buffer, u32 size)
|
|
{
|
|
u32 ix, div_size;
|
|
u32 cur_cksum = 0;
|
|
__be32 *buf;
|
|
|
|
div_size = DIV_ROUND_UP(size, 4);
|
|
|
|
buf = (__be32 *)buffer;
|
|
for (ix = 0; ix < div_size; ix++)
|
|
cur_cksum += be32_to_cpu(buf[ix]);
|
|
|
|
cur_cksum ^= 0xDEADBEEF;
|
|
|
|
return cur_cksum;
|
|
}
|
|
|
|
static int mxl692_validate_fw_header(struct mxl692_dev *dev,
|
|
const u8 *buffer, u32 buf_len)
|
|
{
|
|
int status = 0;
|
|
u32 ix, temp;
|
|
__be32 *local_buf = NULL;
|
|
u8 temp_cksum = 0;
|
|
static const u8 fw_hdr[] = {
|
|
0x4D, 0x31, 0x10, 0x02, 0x40, 0x00, 0x00, 0x80
|
|
};
|
|
|
|
if (memcmp(buffer, fw_hdr, 8) != 0) {
|
|
status = -EINVAL;
|
|
goto err_finish;
|
|
}
|
|
|
|
local_buf = (__be32 *)(buffer + 8);
|
|
temp = be32_to_cpu(*local_buf);
|
|
|
|
if ((buf_len - 16) != temp >> 8) {
|
|
status = -EINVAL;
|
|
goto err_finish;
|
|
}
|
|
|
|
for (ix = 16; ix < buf_len; ix++)
|
|
temp_cksum += buffer[ix];
|
|
|
|
if (temp_cksum != buffer[11])
|
|
status = -EINVAL;
|
|
|
|
err_finish:
|
|
if (status)
|
|
dev_dbg(&dev->i2c_client->dev, "failed\n");
|
|
return status;
|
|
}
|
|
|
|
static int mxl692_write_fw_block(struct mxl692_dev *dev, const u8 *buffer,
|
|
u32 buf_len, u32 *index)
|
|
{
|
|
int status = 0;
|
|
u32 ix = 0, total_len = 0, addr = 0, chunk_len = 0, prevchunk_len = 0;
|
|
u8 local_buf[MXL_EAGLE_MAX_I2C_PACKET_SIZE] = {}, *plocal_buf = NULL;
|
|
int payload_max = MXL_EAGLE_MAX_I2C_PACKET_SIZE - MXL_EAGLE_I2C_MHEADER_SIZE;
|
|
|
|
ix = *index;
|
|
|
|
if (buffer[ix] == 0x53) {
|
|
total_len = buffer[ix + 1] << 16 | buffer[ix + 2] << 8 | buffer[ix + 3];
|
|
total_len = (total_len + 3) & ~3;
|
|
addr = buffer[ix + 4] << 24 | buffer[ix + 5] << 16 |
|
|
buffer[ix + 6] << 8 | buffer[ix + 7];
|
|
ix += MXL_EAGLE_FW_SEGMENT_HEADER_SIZE;
|
|
|
|
while ((total_len > 0) && (status == 0)) {
|
|
plocal_buf = local_buf;
|
|
chunk_len = (total_len < payload_max) ? total_len : payload_max;
|
|
|
|
*plocal_buf++ = 0xFC;
|
|
*plocal_buf++ = chunk_len + sizeof(u32);
|
|
|
|
*(u32 *)plocal_buf = addr + prevchunk_len;
|
|
#ifdef __BIG_ENDIAN
|
|
convert_endian(sizeof(u32), plocal_buf);
|
|
#endif
|
|
plocal_buf += sizeof(u32);
|
|
|
|
memcpy(plocal_buf, &buffer[ix], chunk_len);
|
|
convert_endian(chunk_len, plocal_buf);
|
|
if (mxl692_i2c_write(dev, local_buf,
|
|
(chunk_len + MXL_EAGLE_I2C_MHEADER_SIZE)) < 0) {
|
|
status = -EREMOTEIO;
|
|
break;
|
|
}
|
|
|
|
prevchunk_len += chunk_len;
|
|
total_len -= chunk_len;
|
|
ix += chunk_len;
|
|
}
|
|
*index = ix;
|
|
} else {
|
|
status = -EINVAL;
|
|
}
|
|
|
|
if (status)
|
|
dev_dbg(&dev->i2c_client->dev, "err %d\n", status);
|
|
|
|
return status;
|
|
}
|
|
|
|
static int mxl692_memwrite(struct mxl692_dev *dev, u32 addr,
|
|
u8 *buffer, u32 size)
|
|
{
|
|
int status = 0, total_len = 0;
|
|
u8 local_buf[MXL_EAGLE_MAX_I2C_PACKET_SIZE] = {}, *plocal_buf = NULL;
|
|
|
|
total_len = size;
|
|
total_len = (total_len + 3) & ~3; /* 4 byte alignment */
|
|
|
|
if (total_len > (MXL_EAGLE_MAX_I2C_PACKET_SIZE - MXL_EAGLE_I2C_MHEADER_SIZE))
|
|
dev_dbg(&dev->i2c_client->dev, "hrmph?\n");
|
|
|
|
plocal_buf = local_buf;
|
|
|
|
*plocal_buf++ = 0xFC;
|
|
*plocal_buf++ = total_len + sizeof(u32);
|
|
|
|
*(u32 *)plocal_buf = addr;
|
|
plocal_buf += sizeof(u32);
|
|
|
|
memcpy(plocal_buf, buffer, total_len);
|
|
#ifdef __BIG_ENDIAN
|
|
convert_endian(sizeof(u32) + total_len, local_buf + 2);
|
|
#endif
|
|
if (mxl692_i2c_write(dev, local_buf,
|
|
(total_len + MXL_EAGLE_I2C_MHEADER_SIZE)) < 0) {
|
|
status = -EREMOTEIO;
|
|
goto err_finish;
|
|
}
|
|
|
|
return status;
|
|
err_finish:
|
|
dev_dbg(&dev->i2c_client->dev, "err %d\n", status);
|
|
return status;
|
|
}
|
|
|
|
static int mxl692_memread(struct mxl692_dev *dev, u32 addr,
|
|
u8 *buffer, u32 size)
|
|
{
|
|
int status = 0;
|
|
u8 local_buf[MXL_EAGLE_I2C_MHEADER_SIZE] = {}, *plocal_buf = NULL;
|
|
|
|
plocal_buf = local_buf;
|
|
|
|
*plocal_buf++ = 0xFB;
|
|
*plocal_buf++ = sizeof(u32);
|
|
*(u32 *)plocal_buf = addr;
|
|
#ifdef __BIG_ENDIAN
|
|
convert_endian(sizeof(u32), plocal_buf);
|
|
#endif
|
|
mutex_lock(&dev->i2c_lock);
|
|
|
|
if (mxl692_i2c_write(dev, local_buf, MXL_EAGLE_I2C_MHEADER_SIZE) > 0) {
|
|
size = (size + 3) & ~3; /* 4 byte alignment */
|
|
status = mxl692_i2c_read(dev, buffer, (u16)size) < 0 ? -EREMOTEIO : 0;
|
|
#ifdef __BIG_ENDIAN
|
|
if (status == 0)
|
|
convert_endian(size, buffer);
|
|
#endif
|
|
} else {
|
|
status = -EREMOTEIO;
|
|
}
|
|
|
|
mutex_unlock(&dev->i2c_lock);
|
|
|
|
if (status)
|
|
dev_dbg(&dev->i2c_client->dev, "err %d\n", status);
|
|
|
|
return status;
|
|
}
|
|
|
|
static const char *mxl692_opcode_string(u8 opcode)
|
|
{
|
|
if (opcode <= MXL_EAGLE_OPCODE_INTERNAL)
|
|
return MXL_EAGLE_OPCODE_STRING[opcode];
|
|
|
|
return "invalid opcode";
|
|
}
|
|
|
|
static int mxl692_opwrite(struct mxl692_dev *dev, u8 *buffer,
|
|
u32 size)
|
|
{
|
|
int status = 0, total_len = 0;
|
|
u8 local_buf[MXL_EAGLE_MAX_I2C_PACKET_SIZE] = {}, *plocal_buf = NULL;
|
|
struct MXL_EAGLE_HOST_MSG_HEADER_T *tx_hdr = (struct MXL_EAGLE_HOST_MSG_HEADER_T *)buffer;
|
|
|
|
total_len = size;
|
|
total_len = (total_len + 3) & ~3; /* 4 byte alignment */
|
|
|
|
if (total_len > (MXL_EAGLE_MAX_I2C_PACKET_SIZE - MXL_EAGLE_I2C_PHEADER_SIZE))
|
|
dev_dbg(&dev->i2c_client->dev, "hrmph?\n");
|
|
|
|
plocal_buf = local_buf;
|
|
|
|
*plocal_buf++ = 0xFE;
|
|
*plocal_buf++ = (u8)total_len;
|
|
|
|
memcpy(plocal_buf, buffer, total_len);
|
|
convert_endian(total_len, plocal_buf);
|
|
|
|
if (mxl692_i2c_write(dev, local_buf,
|
|
(total_len + MXL_EAGLE_I2C_PHEADER_SIZE)) < 0) {
|
|
status = -EREMOTEIO;
|
|
goto err_finish;
|
|
}
|
|
err_finish:
|
|
if (status)
|
|
dev_dbg(&dev->i2c_client->dev, "opcode %s err %d\n",
|
|
mxl692_opcode_string(tx_hdr->opcode), status);
|
|
return status;
|
|
}
|
|
|
|
static int mxl692_opread(struct mxl692_dev *dev, u8 *buffer,
|
|
u32 size)
|
|
{
|
|
int status = 0;
|
|
u32 ix = 0;
|
|
u8 local_buf[MXL_EAGLE_I2C_PHEADER_SIZE] = {};
|
|
|
|
local_buf[0] = 0xFD;
|
|
local_buf[1] = 0;
|
|
|
|
if (mxl692_i2c_write(dev, local_buf, MXL_EAGLE_I2C_PHEADER_SIZE) > 0) {
|
|
size = (size + 3) & ~3; /* 4 byte alignment */
|
|
|
|
/* Read in 4 byte chunks */
|
|
for (ix = 0; ix < size; ix += 4) {
|
|
if (mxl692_i2c_read(dev, buffer + ix, 4) < 0) {
|
|
dev_dbg(&dev->i2c_client->dev, "ix=%d size=%d\n", ix, size);
|
|
status = -EREMOTEIO;
|
|
goto err_finish;
|
|
}
|
|
}
|
|
convert_endian(size, buffer);
|
|
} else {
|
|
status = -EREMOTEIO;
|
|
}
|
|
err_finish:
|
|
if (status)
|
|
dev_dbg(&dev->i2c_client->dev, "err %d\n", status);
|
|
return status;
|
|
}
|
|
|
|
static int mxl692_i2c_writeread(struct mxl692_dev *dev,
|
|
u8 opcode,
|
|
u8 *tx_payload,
|
|
u8 tx_payload_size,
|
|
u8 *rx_payload,
|
|
u8 rx_payload_expected)
|
|
{
|
|
int status = 0, timeout = 40;
|
|
u8 tx_buf[MXL_EAGLE_MAX_I2C_PACKET_SIZE] = {};
|
|
u8 rx_buf[MXL_EAGLE_MAX_I2C_PACKET_SIZE] = {};
|
|
u32 resp_checksum = 0, resp_checksum_tmp = 0;
|
|
struct MXL_EAGLE_HOST_MSG_HEADER_T *tx_header;
|
|
struct MXL_EAGLE_HOST_MSG_HEADER_T *rx_header;
|
|
|
|
mutex_lock(&dev->i2c_lock);
|
|
|
|
if ((tx_payload_size + MXL_EAGLE_HOST_MSG_HEADER_SIZE) >
|
|
(MXL_EAGLE_MAX_I2C_PACKET_SIZE - MXL_EAGLE_I2C_PHEADER_SIZE)) {
|
|
status = -EINVAL;
|
|
goto err_finish;
|
|
}
|
|
|
|
tx_header = (struct MXL_EAGLE_HOST_MSG_HEADER_T *)tx_buf;
|
|
tx_header->opcode = opcode;
|
|
tx_header->seqnum = dev->seqnum++;
|
|
tx_header->payload_size = tx_payload_size;
|
|
tx_header->checksum = 0;
|
|
|
|
if (dev->seqnum == 0)
|
|
dev->seqnum = 1;
|
|
|
|
if (tx_payload && tx_payload_size > 0)
|
|
memcpy(&tx_buf[MXL_EAGLE_HOST_MSG_HEADER_SIZE], tx_payload, tx_payload_size);
|
|
|
|
mxl692_tx_swap(opcode, tx_buf);
|
|
|
|
tx_header->checksum = 0;
|
|
tx_header->checksum = mxl692_checksum(tx_buf,
|
|
MXL_EAGLE_HOST_MSG_HEADER_SIZE + tx_payload_size);
|
|
#ifdef __LITTLE_ENDIAN
|
|
convert_endian(4, (u8 *)&tx_header->checksum); /* cksum is big endian */
|
|
#endif
|
|
/* send Tx message */
|
|
status = mxl692_opwrite(dev, tx_buf,
|
|
tx_payload_size + MXL_EAGLE_HOST_MSG_HEADER_SIZE);
|
|
if (status) {
|
|
status = -EREMOTEIO;
|
|
goto err_finish;
|
|
}
|
|
|
|
/* receive Rx message (polling) */
|
|
rx_header = (struct MXL_EAGLE_HOST_MSG_HEADER_T *)rx_buf;
|
|
|
|
do {
|
|
status = mxl692_opread(dev, rx_buf,
|
|
rx_payload_expected + MXL_EAGLE_HOST_MSG_HEADER_SIZE);
|
|
usleep_range(1000, 2000);
|
|
timeout--;
|
|
} while ((timeout > 0) && (status == 0) &&
|
|
(rx_header->seqnum == 0) &&
|
|
(rx_header->checksum == 0));
|
|
|
|
if (timeout == 0 || status) {
|
|
dev_dbg(&dev->i2c_client->dev, "timeout=%d status=%d\n",
|
|
timeout, status);
|
|
status = -ETIMEDOUT;
|
|
goto err_finish;
|
|
}
|
|
|
|
if (rx_header->status) {
|
|
dev_dbg(&dev->i2c_client->dev, "rx header status code: %d\n", rx_header->status);
|
|
status = -EREMOTEIO;
|
|
goto err_finish;
|
|
}
|
|
|
|
if (rx_header->seqnum != tx_header->seqnum ||
|
|
rx_header->opcode != tx_header->opcode ||
|
|
rx_header->payload_size != rx_payload_expected) {
|
|
dev_dbg(&dev->i2c_client->dev, "Something failed seq=%s opcode=%s pSize=%s\n",
|
|
rx_header->seqnum != tx_header->seqnum ? "X" : "0",
|
|
rx_header->opcode != tx_header->opcode ? "X" : "0",
|
|
rx_header->payload_size != rx_payload_expected ? "X" : "0");
|
|
if (rx_header->payload_size != rx_payload_expected)
|
|
dev_dbg(&dev->i2c_client->dev,
|
|
"rx_header->payloadSize=%d rx_payload_expected=%d\n",
|
|
rx_header->payload_size, rx_payload_expected);
|
|
status = -EREMOTEIO;
|
|
goto err_finish;
|
|
}
|
|
|
|
resp_checksum = rx_header->checksum;
|
|
rx_header->checksum = 0;
|
|
|
|
resp_checksum_tmp = mxl692_checksum(rx_buf,
|
|
MXL_EAGLE_HOST_MSG_HEADER_SIZE + rx_header->payload_size);
|
|
#ifdef __LITTLE_ENDIAN
|
|
convert_endian(4, (u8 *)&resp_checksum_tmp); /* cksum is big endian */
|
|
#endif
|
|
if (resp_checksum != resp_checksum_tmp) {
|
|
dev_dbg(&dev->i2c_client->dev, "rx checksum failure\n");
|
|
status = -EREMOTEIO;
|
|
goto err_finish;
|
|
}
|
|
|
|
mxl692_rx_swap(rx_header->opcode, rx_buf);
|
|
|
|
if (rx_header->payload_size > 0) {
|
|
if (!rx_payload) {
|
|
dev_dbg(&dev->i2c_client->dev, "no rx payload?!?\n");
|
|
status = -EREMOTEIO;
|
|
goto err_finish;
|
|
}
|
|
memcpy(rx_payload, rx_buf + MXL_EAGLE_HOST_MSG_HEADER_SIZE,
|
|
rx_header->payload_size);
|
|
}
|
|
err_finish:
|
|
if (status)
|
|
dev_dbg(&dev->i2c_client->dev, "err %d\n", status);
|
|
|
|
mutex_unlock(&dev->i2c_lock);
|
|
return status;
|
|
}
|
|
|
|
static int mxl692_fwdownload(struct mxl692_dev *dev,
|
|
const u8 *firmware_buf, u32 buf_len)
|
|
{
|
|
int status = 0;
|
|
u32 ix, reg_val = 0x1;
|
|
u8 rx_buf[MXL_EAGLE_MAX_I2C_PACKET_SIZE] = {};
|
|
struct MXL_EAGLE_DEV_STATUS_T *dev_status;
|
|
|
|
if (buf_len < MXL_EAGLE_FW_HEADER_SIZE ||
|
|
buf_len > MXL_EAGLE_FW_MAX_SIZE_IN_KB * 1000)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&dev->i2c_lock);
|
|
|
|
dev_dbg(&dev->i2c_client->dev, "\n");
|
|
|
|
status = mxl692_validate_fw_header(dev, firmware_buf, buf_len);
|
|
if (status)
|
|
goto err_finish;
|
|
|
|
ix = 16;
|
|
status = mxl692_write_fw_block(dev, firmware_buf, buf_len, &ix); /* DRAM */
|
|
if (status)
|
|
goto err_finish;
|
|
|
|
status = mxl692_write_fw_block(dev, firmware_buf, buf_len, &ix); /* IRAM */
|
|
if (status)
|
|
goto err_finish;
|
|
|
|
/* release CPU from reset */
|
|
status = mxl692_memwrite(dev, 0x70000018, (u8 *)®_val, sizeof(u32));
|
|
if (status)
|
|
goto err_finish;
|
|
|
|
mutex_unlock(&dev->i2c_lock);
|
|
|
|
if (status == 0) {
|
|
/* verify FW is alive */
|
|
usleep_range(MXL_EAGLE_FW_LOAD_TIME * 1000, (MXL_EAGLE_FW_LOAD_TIME + 5) * 1000);
|
|
dev_status = (struct MXL_EAGLE_DEV_STATUS_T *)&rx_buf;
|
|
status = mxl692_i2c_writeread(dev,
|
|
MXL_EAGLE_OPCODE_DEVICE_STATUS_GET,
|
|
NULL,
|
|
0,
|
|
(u8 *)dev_status,
|
|
sizeof(struct MXL_EAGLE_DEV_STATUS_T));
|
|
}
|
|
|
|
return status;
|
|
err_finish:
|
|
mutex_unlock(&dev->i2c_lock);
|
|
if (status)
|
|
dev_dbg(&dev->i2c_client->dev, "err %d\n", status);
|
|
return status;
|
|
}
|
|
|
|
static int mxl692_get_versions(struct mxl692_dev *dev)
|
|
{
|
|
int status = 0;
|
|
struct MXL_EAGLE_DEV_VER_T dev_ver = {};
|
|
static const char * const chip_id[] = {"N/A", "691", "248", "692"};
|
|
|
|
status = mxl692_i2c_writeread(dev, MXL_EAGLE_OPCODE_DEVICE_VERSION_GET,
|
|
NULL,
|
|
0,
|
|
(u8 *)&dev_ver,
|
|
sizeof(struct MXL_EAGLE_DEV_VER_T));
|
|
if (status)
|
|
return status;
|
|
|
|
dev_info(&dev->i2c_client->dev, "MxL692_DEMOD Chip ID: %s\n",
|
|
chip_id[dev_ver.chip_id]);
|
|
|
|
dev_info(&dev->i2c_client->dev,
|
|
"MxL692_DEMOD FW Version: %d.%d.%d.%d_RC%d\n",
|
|
dev_ver.firmware_ver[0],
|
|
dev_ver.firmware_ver[1],
|
|
dev_ver.firmware_ver[2],
|
|
dev_ver.firmware_ver[3],
|
|
dev_ver.firmware_ver[4]);
|
|
|
|
return status;
|
|
}
|
|
|
|
static int mxl692_reset(struct mxl692_dev *dev)
|
|
{
|
|
int status = 0;
|
|
u32 dev_type = MXL_EAGLE_DEVICE_MAX, reg_val = 0x2;
|
|
|
|
dev_dbg(&dev->i2c_client->dev, "\n");
|
|
|
|
/* legacy i2c override */
|
|
status = mxl692_memwrite(dev, 0x80000100, (u8 *)®_val, sizeof(u32));
|
|
if (status)
|
|
goto err_finish;
|
|
|
|
/* verify sku */
|
|
status = mxl692_memread(dev, 0x70000188, (u8 *)&dev_type, sizeof(u32));
|
|
if (status)
|
|
goto err_finish;
|
|
|
|
if (dev_type != dev->device_type)
|
|
goto err_finish;
|
|
|
|
err_finish:
|
|
if (status)
|
|
dev_dbg(&dev->i2c_client->dev, "err %d\n", status);
|
|
return status;
|
|
}
|
|
|
|
static int mxl692_config_regulators(struct mxl692_dev *dev,
|
|
enum MXL_EAGLE_POWER_SUPPLY_SOURCE_E power_supply)
|
|
{
|
|
int status = 0;
|
|
u32 reg_val;
|
|
|
|
dev_dbg(&dev->i2c_client->dev, "\n");
|
|
|
|
/* configure main regulator according to the power supply source */
|
|
status = mxl692_memread(dev, 0x90000000, (u8 *)®_val, sizeof(u32));
|
|
if (status)
|
|
goto err_finish;
|
|
|
|
reg_val &= 0x00FFFFFF;
|
|
reg_val |= (power_supply == MXL_EAGLE_POWER_SUPPLY_SOURCE_SINGLE) ?
|
|
0x14000000 : 0x10000000;
|
|
|
|
status = mxl692_memwrite(dev, 0x90000000, (u8 *)®_val, sizeof(u32));
|
|
if (status)
|
|
goto err_finish;
|
|
|
|
/* configure digital regulator to high current mode */
|
|
status = mxl692_memread(dev, 0x90000018, (u8 *)®_val, sizeof(u32));
|
|
if (status)
|
|
goto err_finish;
|
|
|
|
reg_val |= 0x800;
|
|
|
|
status = mxl692_memwrite(dev, 0x90000018, (u8 *)®_val, sizeof(u32));
|
|
|
|
err_finish:
|
|
if (status)
|
|
dev_dbg(&dev->i2c_client->dev, "err %d\n", status);
|
|
return status;
|
|
}
|
|
|
|
static int mxl692_config_xtal(struct mxl692_dev *dev,
|
|
struct MXL_EAGLE_DEV_XTAL_T *dev_xtal)
|
|
{
|
|
int status = 0;
|
|
u32 reg_val, reg_val1;
|
|
|
|
dev_dbg(&dev->i2c_client->dev, "\n");
|
|
|
|
status = mxl692_memread(dev, 0x90000000, (u8 *)®_val, sizeof(u32));
|
|
if (status)
|
|
goto err_finish;
|
|
|
|
/* set XTAL capacitance */
|
|
reg_val &= 0xFFFFFFE0;
|
|
reg_val |= dev_xtal->xtal_cap;
|
|
|
|
/* set CLK OUT */
|
|
reg_val = dev_xtal->clk_out_enable ? (reg_val | 0x0100) : (reg_val & 0xFFFFFEFF);
|
|
|
|
status = mxl692_memwrite(dev, 0x90000000, (u8 *)®_val, sizeof(u32));
|
|
if (status)
|
|
goto err_finish;
|
|
|
|
/* set CLK OUT divider */
|
|
reg_val = dev_xtal->clk_out_div_enable ? (reg_val | 0x0200) : (reg_val & 0xFFFFFDFF);
|
|
|
|
status = mxl692_memwrite(dev, 0x90000000, (u8 *)®_val, sizeof(u32));
|
|
if (status)
|
|
goto err_finish;
|
|
|
|
/* set XTAL sharing */
|
|
reg_val = dev_xtal->xtal_sharing_enable ? (reg_val | 0x010400) : (reg_val & 0xFFFEFBFF);
|
|
|
|
status = mxl692_memwrite(dev, 0x90000000, (u8 *)®_val, sizeof(u32));
|
|
if (status)
|
|
goto err_finish;
|
|
|
|
/* enable/disable XTAL calibration, based on master/slave device */
|
|
status = mxl692_memread(dev, 0x90000030, (u8 *)®_val1, sizeof(u32));
|
|
if (status)
|
|
goto err_finish;
|
|
|
|
if (dev_xtal->xtal_calibration_enable) {
|
|
/* enable XTAL calibration and set XTAL amplitude to a higher value */
|
|
reg_val1 &= 0xFFFFFFFD;
|
|
reg_val1 |= 0x30;
|
|
|
|
status = mxl692_memwrite(dev, 0x90000030, (u8 *)®_val1, sizeof(u32));
|
|
if (status)
|
|
goto err_finish;
|
|
} else {
|
|
/* disable XTAL calibration */
|
|
reg_val1 |= 0x2;
|
|
|
|
status = mxl692_memwrite(dev, 0x90000030, (u8 *)®_val1, sizeof(u32));
|
|
if (status)
|
|
goto err_finish;
|
|
|
|
/* set XTAL bias value */
|
|
status = mxl692_memread(dev, 0x9000002c, (u8 *)®_val, sizeof(u32));
|
|
if (status)
|
|
goto err_finish;
|
|
|
|
reg_val &= 0xC0FFFFFF;
|
|
reg_val |= 0xA000000;
|
|
|
|
status = mxl692_memwrite(dev, 0x9000002c, (u8 *)®_val, sizeof(u32));
|
|
if (status)
|
|
goto err_finish;
|
|
}
|
|
|
|
/* start XTAL calibration */
|
|
status = mxl692_memread(dev, 0x70000010, (u8 *)®_val, sizeof(u32));
|
|
if (status)
|
|
goto err_finish;
|
|
|
|
reg_val |= 0x8;
|
|
|
|
status = mxl692_memwrite(dev, 0x70000010, (u8 *)®_val, sizeof(u32));
|
|
if (status)
|
|
goto err_finish;
|
|
|
|
status = mxl692_memread(dev, 0x70000018, (u8 *)®_val, sizeof(u32));
|
|
if (status)
|
|
goto err_finish;
|
|
|
|
reg_val |= 0x10;
|
|
|
|
status = mxl692_memwrite(dev, 0x70000018, (u8 *)®_val, sizeof(u32));
|
|
if (status)
|
|
goto err_finish;
|
|
|
|
status = mxl692_memread(dev, 0x9001014c, (u8 *)®_val, sizeof(u32));
|
|
if (status)
|
|
goto err_finish;
|
|
|
|
reg_val &= 0xFFFFEFFF;
|
|
|
|
status = mxl692_memwrite(dev, 0x9001014c, (u8 *)®_val, sizeof(u32));
|
|
if (status)
|
|
goto err_finish;
|
|
|
|
reg_val |= 0x1000;
|
|
|
|
status = mxl692_memwrite(dev, 0x9001014c, (u8 *)®_val, sizeof(u32));
|
|
if (status)
|
|
goto err_finish;
|
|
|
|
usleep_range(45000, 55000);
|
|
|
|
err_finish:
|
|
if (status)
|
|
dev_dbg(&dev->i2c_client->dev, "err %d\n", status);
|
|
return status;
|
|
}
|
|
|
|
static int mxl692_powermode(struct mxl692_dev *dev,
|
|
enum MXL_EAGLE_POWER_MODE_E power_mode)
|
|
{
|
|
int status = 0;
|
|
u8 mode = power_mode;
|
|
|
|
dev_dbg(&dev->i2c_client->dev, "%s\n",
|
|
power_mode == MXL_EAGLE_POWER_MODE_SLEEP ? "sleep" : "active");
|
|
|
|
status = mxl692_i2c_writeread(dev,
|
|
MXL_EAGLE_OPCODE_DEVICE_POWERMODE_SET,
|
|
&mode,
|
|
sizeof(u8),
|
|
NULL,
|
|
0);
|
|
if (status) {
|
|
dev_dbg(&dev->i2c_client->dev, "err %d\n", status);
|
|
return status;
|
|
}
|
|
|
|
dev->power_mode = power_mode;
|
|
|
|
return status;
|
|
}
|
|
|
|
static int mxl692_init(struct dvb_frontend *fe)
|
|
{
|
|
struct mxl692_dev *dev = fe->demodulator_priv;
|
|
struct i2c_client *client = dev->i2c_client;
|
|
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
|
|
int status = 0;
|
|
const struct firmware *firmware;
|
|
struct MXL_EAGLE_DEV_XTAL_T xtal_config = {};
|
|
|
|
dev_dbg(&dev->i2c_client->dev, "\n");
|
|
|
|
if (dev->init_done)
|
|
goto warm;
|
|
|
|
dev->seqnum = 1;
|
|
|
|
status = mxl692_reset(dev);
|
|
if (status)
|
|
goto err;
|
|
|
|
usleep_range(50 * 1000, 60 * 1000); /* was 1000! */
|
|
|
|
status = mxl692_config_regulators(dev, MXL_EAGLE_POWER_SUPPLY_SOURCE_DUAL);
|
|
if (status)
|
|
goto err;
|
|
|
|
xtal_config.xtal_cap = 26;
|
|
xtal_config.clk_out_div_enable = 0;
|
|
xtal_config.clk_out_enable = 0;
|
|
xtal_config.xtal_calibration_enable = 0;
|
|
xtal_config.xtal_sharing_enable = 1;
|
|
status = mxl692_config_xtal(dev, &xtal_config);
|
|
if (status)
|
|
goto err;
|
|
|
|
status = request_firmware(&firmware, MXL692_FIRMWARE, &client->dev);
|
|
if (status) {
|
|
dev_dbg(&dev->i2c_client->dev, "firmware missing? %s\n",
|
|
MXL692_FIRMWARE);
|
|
goto err;
|
|
}
|
|
|
|
status = mxl692_fwdownload(dev, firmware->data, firmware->size);
|
|
if (status)
|
|
goto err_release_firmware;
|
|
|
|
release_firmware(firmware);
|
|
|
|
status = mxl692_get_versions(dev);
|
|
if (status)
|
|
goto err;
|
|
|
|
dev->power_mode = MXL_EAGLE_POWER_MODE_SLEEP;
|
|
warm:
|
|
/* Config Device Power Mode */
|
|
if (dev->power_mode != MXL_EAGLE_POWER_MODE_ACTIVE) {
|
|
status = mxl692_powermode(dev, MXL_EAGLE_POWER_MODE_ACTIVE);
|
|
if (status)
|
|
goto err;
|
|
|
|
usleep_range(50 * 1000, 60 * 1000); /* was 500! */
|
|
}
|
|
|
|
/* Init stats here to indicate which stats are supported */
|
|
c->cnr.len = 1;
|
|
c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
c->post_bit_error.len = 1;
|
|
c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
c->post_bit_count.len = 1;
|
|
c->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
c->block_error.len = 1;
|
|
c->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
|
|
dev->init_done = 1;
|
|
return 0;
|
|
err_release_firmware:
|
|
release_firmware(firmware);
|
|
err:
|
|
dev_dbg(&dev->i2c_client->dev, "err %d\n", status);
|
|
return status;
|
|
}
|
|
|
|
static int mxl692_sleep(struct dvb_frontend *fe)
|
|
{
|
|
struct mxl692_dev *dev = fe->demodulator_priv;
|
|
|
|
if (dev->power_mode != MXL_EAGLE_POWER_MODE_SLEEP)
|
|
mxl692_powermode(dev, MXL_EAGLE_POWER_MODE_SLEEP);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxl692_set_frontend(struct dvb_frontend *fe)
|
|
{
|
|
struct dtv_frontend_properties *p = &fe->dtv_property_cache;
|
|
struct mxl692_dev *dev = fe->demodulator_priv;
|
|
|
|
int status = 0;
|
|
enum MXL_EAGLE_DEMOD_TYPE_E demod_type;
|
|
struct MXL_EAGLE_MPEGOUT_PARAMS_T mpeg_params = {};
|
|
enum MXL_EAGLE_QAM_DEMOD_ANNEX_TYPE_E qam_annex = MXL_EAGLE_QAM_DEMOD_ANNEX_B;
|
|
struct MXL_EAGLE_QAM_DEMOD_PARAMS_T qam_params = {};
|
|
struct MXL_EAGLE_TUNER_CHANNEL_PARAMS_T tuner_params = {};
|
|
u8 op_param = 0;
|
|
|
|
dev_dbg(&dev->i2c_client->dev, "\n");
|
|
|
|
switch (p->modulation) {
|
|
case VSB_8:
|
|
demod_type = MXL_EAGLE_DEMOD_TYPE_ATSC;
|
|
break;
|
|
case QAM_AUTO:
|
|
case QAM_64:
|
|
case QAM_128:
|
|
case QAM_256:
|
|
demod_type = MXL_EAGLE_DEMOD_TYPE_QAM;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (dev->current_frequency == p->frequency && dev->demod_type == demod_type) {
|
|
dev_dbg(&dev->i2c_client->dev, "already set up\n");
|
|
return 0;
|
|
}
|
|
|
|
dev->current_frequency = -1;
|
|
dev->demod_type = -1;
|
|
|
|
op_param = demod_type;
|
|
status = mxl692_i2c_writeread(dev,
|
|
MXL_EAGLE_OPCODE_DEVICE_DEMODULATOR_TYPE_SET,
|
|
&op_param,
|
|
sizeof(u8),
|
|
NULL,
|
|
0);
|
|
if (status) {
|
|
dev_dbg(&dev->i2c_client->dev,
|
|
"DEVICE_DEMODULATOR_TYPE_SET...FAIL err 0x%x\n", status);
|
|
goto err;
|
|
}
|
|
|
|
usleep_range(20 * 1000, 30 * 1000); /* was 500! */
|
|
|
|
mpeg_params.mpeg_parallel = 0;
|
|
mpeg_params.msb_first = MXL_EAGLE_DATA_SERIAL_MSB_1ST;
|
|
mpeg_params.mpeg_sync_pulse_width = MXL_EAGLE_DATA_SYNC_WIDTH_BIT;
|
|
mpeg_params.mpeg_valid_pol = MXL_EAGLE_CLOCK_POSITIVE;
|
|
mpeg_params.mpeg_sync_pol = MXL_EAGLE_CLOCK_POSITIVE;
|
|
mpeg_params.mpeg_clk_pol = MXL_EAGLE_CLOCK_NEGATIVE;
|
|
mpeg_params.mpeg3wire_mode_enable = 0;
|
|
mpeg_params.mpeg_clk_freq = MXL_EAGLE_MPEG_CLOCK_27MHZ;
|
|
|
|
switch (demod_type) {
|
|
case MXL_EAGLE_DEMOD_TYPE_ATSC:
|
|
status = mxl692_i2c_writeread(dev,
|
|
MXL_EAGLE_OPCODE_DEVICE_MPEG_OUT_PARAMS_SET,
|
|
(u8 *)&mpeg_params,
|
|
sizeof(struct MXL_EAGLE_MPEGOUT_PARAMS_T),
|
|
NULL,
|
|
0);
|
|
if (status)
|
|
goto err;
|
|
break;
|
|
case MXL_EAGLE_DEMOD_TYPE_QAM:
|
|
if (qam_annex == MXL_EAGLE_QAM_DEMOD_ANNEX_A)
|
|
mpeg_params.msb_first = MXL_EAGLE_DATA_SERIAL_LSB_1ST;
|
|
status = mxl692_i2c_writeread(dev,
|
|
MXL_EAGLE_OPCODE_DEVICE_MPEG_OUT_PARAMS_SET,
|
|
(u8 *)&mpeg_params,
|
|
sizeof(struct MXL_EAGLE_MPEGOUT_PARAMS_T),
|
|
NULL,
|
|
0);
|
|
if (status)
|
|
goto err;
|
|
|
|
qam_params.annex_type = qam_annex;
|
|
qam_params.qam_type = MXL_EAGLE_QAM_DEMOD_AUTO;
|
|
qam_params.iq_flip = MXL_EAGLE_DEMOD_IQ_AUTO;
|
|
if (p->modulation == QAM_64)
|
|
qam_params.symbol_rate_hz = 5057000;
|
|
else
|
|
qam_params.symbol_rate_hz = 5361000;
|
|
|
|
qam_params.symbol_rate_256qam_hz = 5361000;
|
|
|
|
status = mxl692_i2c_writeread(dev,
|
|
MXL_EAGLE_OPCODE_QAM_PARAMS_SET,
|
|
(u8 *)&qam_params,
|
|
sizeof(struct MXL_EAGLE_QAM_DEMOD_PARAMS_T),
|
|
NULL, 0);
|
|
if (status)
|
|
goto err;
|
|
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
usleep_range(20 * 1000, 30 * 1000); /* was 500! */
|
|
|
|
tuner_params.freq_hz = p->frequency;
|
|
tuner_params.bandwidth = MXL_EAGLE_TUNER_BW_6MHZ;
|
|
tuner_params.tune_mode = MXL_EAGLE_TUNER_CHANNEL_TUNE_MODE_VIEW;
|
|
|
|
dev_dbg(&dev->i2c_client->dev, " Tuning Freq: %d %s\n", tuner_params.freq_hz,
|
|
demod_type == MXL_EAGLE_DEMOD_TYPE_ATSC ? "ATSC" : "QAM");
|
|
|
|
status = mxl692_i2c_writeread(dev,
|
|
MXL_EAGLE_OPCODE_TUNER_CHANNEL_TUNE_SET,
|
|
(u8 *)&tuner_params,
|
|
sizeof(struct MXL_EAGLE_TUNER_CHANNEL_PARAMS_T),
|
|
NULL,
|
|
0);
|
|
if (status)
|
|
goto err;
|
|
|
|
usleep_range(20 * 1000, 30 * 1000); /* was 500! */
|
|
|
|
switch (demod_type) {
|
|
case MXL_EAGLE_DEMOD_TYPE_ATSC:
|
|
status = mxl692_i2c_writeread(dev,
|
|
MXL_EAGLE_OPCODE_ATSC_INIT_SET,
|
|
NULL, 0, NULL, 0);
|
|
if (status)
|
|
goto err;
|
|
break;
|
|
case MXL_EAGLE_DEMOD_TYPE_QAM:
|
|
status = mxl692_i2c_writeread(dev,
|
|
MXL_EAGLE_OPCODE_QAM_RESTART_SET,
|
|
NULL, 0, NULL, 0);
|
|
if (status)
|
|
goto err;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
dev->demod_type = demod_type;
|
|
dev->current_frequency = p->frequency;
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&dev->i2c_client->dev, "err %d\n", status);
|
|
return status;
|
|
}
|
|
|
|
static int mxl692_get_frontend(struct dvb_frontend *fe,
|
|
struct dtv_frontend_properties *p)
|
|
{
|
|
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
|
|
|
|
p->modulation = c->modulation;
|
|
p->frequency = c->frequency;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxl692_read_snr(struct dvb_frontend *fe, u16 *snr)
|
|
{
|
|
struct mxl692_dev *dev = fe->demodulator_priv;
|
|
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
|
|
u8 rx_buf[MXL_EAGLE_MAX_I2C_PACKET_SIZE] = {};
|
|
struct MXL_EAGLE_ATSC_DEMOD_STATUS_T *atsc_status;
|
|
struct MXL_EAGLE_QAM_DEMOD_STATUS_T *qam_status;
|
|
enum MXL_EAGLE_DEMOD_TYPE_E demod_type = dev->demod_type;
|
|
int mxl_status = 0;
|
|
|
|
*snr = 0;
|
|
|
|
dev_dbg(&dev->i2c_client->dev, "\n");
|
|
|
|
atsc_status = (struct MXL_EAGLE_ATSC_DEMOD_STATUS_T *)&rx_buf;
|
|
qam_status = (struct MXL_EAGLE_QAM_DEMOD_STATUS_T *)&rx_buf;
|
|
|
|
switch (demod_type) {
|
|
case MXL_EAGLE_DEMOD_TYPE_ATSC:
|
|
mxl_status = mxl692_i2c_writeread(dev,
|
|
MXL_EAGLE_OPCODE_ATSC_STATUS_GET,
|
|
NULL,
|
|
0,
|
|
rx_buf,
|
|
sizeof(struct MXL_EAGLE_ATSC_DEMOD_STATUS_T));
|
|
if (!mxl_status) {
|
|
*snr = (u16)(atsc_status->snr_db_tenths / 10);
|
|
c->cnr.stat[0].scale = FE_SCALE_DECIBEL;
|
|
c->cnr.stat[0].svalue = *snr;
|
|
}
|
|
break;
|
|
case MXL_EAGLE_DEMOD_TYPE_QAM:
|
|
mxl_status = mxl692_i2c_writeread(dev,
|
|
MXL_EAGLE_OPCODE_QAM_STATUS_GET,
|
|
NULL,
|
|
0,
|
|
rx_buf,
|
|
sizeof(struct MXL_EAGLE_QAM_DEMOD_STATUS_T));
|
|
if (!mxl_status)
|
|
*snr = (u16)(qam_status->snr_db_tenths / 10);
|
|
break;
|
|
case MXL_EAGLE_DEMOD_TYPE_OOB:
|
|
default:
|
|
break;
|
|
}
|
|
|
|
if (mxl_status)
|
|
dev_dbg(&dev->i2c_client->dev, "err %d\n", mxl_status);
|
|
return mxl_status;
|
|
}
|
|
|
|
static int mxl692_read_ber_ucb(struct dvb_frontend *fe)
|
|
{
|
|
struct mxl692_dev *dev = fe->demodulator_priv;
|
|
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
|
|
u8 rx_buf[MXL_EAGLE_MAX_I2C_PACKET_SIZE] = {};
|
|
struct MXL_EAGLE_ATSC_DEMOD_ERROR_COUNTERS_T *atsc_errors;
|
|
enum MXL_EAGLE_DEMOD_TYPE_E demod_type = dev->demod_type;
|
|
int mxl_status = 0;
|
|
u32 utmp;
|
|
|
|
dev_dbg(&dev->i2c_client->dev, "\n");
|
|
|
|
atsc_errors = (struct MXL_EAGLE_ATSC_DEMOD_ERROR_COUNTERS_T *)&rx_buf;
|
|
|
|
switch (demod_type) {
|
|
case MXL_EAGLE_DEMOD_TYPE_ATSC:
|
|
mxl_status = mxl692_i2c_writeread(dev,
|
|
MXL_EAGLE_OPCODE_ATSC_ERROR_COUNTERS_GET,
|
|
NULL,
|
|
0,
|
|
rx_buf,
|
|
sizeof(struct MXL_EAGLE_ATSC_DEMOD_ERROR_COUNTERS_T));
|
|
if (!mxl_status) {
|
|
if (atsc_errors->error_packets == 0)
|
|
utmp = 0;
|
|
else
|
|
utmp = ((atsc_errors->error_bytes / atsc_errors->error_packets) *
|
|
atsc_errors->total_packets);
|
|
/* ber */
|
|
c->post_bit_error.stat[0].scale = FE_SCALE_COUNTER;
|
|
c->post_bit_error.stat[0].uvalue += atsc_errors->error_bytes;
|
|
c->post_bit_count.stat[0].scale = FE_SCALE_COUNTER;
|
|
c->post_bit_count.stat[0].uvalue += utmp;
|
|
/* ucb */
|
|
c->block_error.stat[0].scale = FE_SCALE_COUNTER;
|
|
c->block_error.stat[0].uvalue += atsc_errors->error_packets;
|
|
|
|
dev_dbg(&dev->i2c_client->dev, "%llu %llu\n",
|
|
c->post_bit_count.stat[0].uvalue, c->block_error.stat[0].uvalue);
|
|
}
|
|
break;
|
|
case MXL_EAGLE_DEMOD_TYPE_QAM:
|
|
case MXL_EAGLE_DEMOD_TYPE_OOB:
|
|
default:
|
|
break;
|
|
}
|
|
|
|
if (mxl_status)
|
|
dev_dbg(&dev->i2c_client->dev, "err %d\n", mxl_status);
|
|
|
|
return mxl_status;
|
|
}
|
|
|
|
static int mxl692_read_status(struct dvb_frontend *fe,
|
|
enum fe_status *status)
|
|
{
|
|
struct mxl692_dev *dev = fe->demodulator_priv;
|
|
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
|
|
u8 rx_buf[MXL_EAGLE_MAX_I2C_PACKET_SIZE] = {};
|
|
struct MXL_EAGLE_ATSC_DEMOD_STATUS_T *atsc_status;
|
|
struct MXL_EAGLE_QAM_DEMOD_STATUS_T *qam_status;
|
|
enum MXL_EAGLE_DEMOD_TYPE_E demod_type = dev->demod_type;
|
|
int mxl_status = 0;
|
|
*status = 0;
|
|
|
|
dev_dbg(&dev->i2c_client->dev, "\n");
|
|
|
|
atsc_status = (struct MXL_EAGLE_ATSC_DEMOD_STATUS_T *)&rx_buf;
|
|
qam_status = (struct MXL_EAGLE_QAM_DEMOD_STATUS_T *)&rx_buf;
|
|
|
|
switch (demod_type) {
|
|
case MXL_EAGLE_DEMOD_TYPE_ATSC:
|
|
mxl_status = mxl692_i2c_writeread(dev,
|
|
MXL_EAGLE_OPCODE_ATSC_STATUS_GET,
|
|
NULL,
|
|
0,
|
|
rx_buf,
|
|
sizeof(struct MXL_EAGLE_ATSC_DEMOD_STATUS_T));
|
|
if (!mxl_status && atsc_status->atsc_lock) {
|
|
*status |= FE_HAS_SIGNAL;
|
|
*status |= FE_HAS_CARRIER;
|
|
*status |= FE_HAS_VITERBI;
|
|
*status |= FE_HAS_SYNC;
|
|
*status |= FE_HAS_LOCK;
|
|
|
|
c->cnr.stat[0].scale = FE_SCALE_DECIBEL;
|
|
c->cnr.stat[0].svalue = atsc_status->snr_db_tenths / 10;
|
|
}
|
|
break;
|
|
case MXL_EAGLE_DEMOD_TYPE_QAM:
|
|
mxl_status = mxl692_i2c_writeread(dev,
|
|
MXL_EAGLE_OPCODE_QAM_STATUS_GET,
|
|
NULL,
|
|
0,
|
|
rx_buf,
|
|
sizeof(struct MXL_EAGLE_QAM_DEMOD_STATUS_T));
|
|
if (!mxl_status && qam_status->qam_locked) {
|
|
*status |= FE_HAS_SIGNAL;
|
|
*status |= FE_HAS_CARRIER;
|
|
*status |= FE_HAS_VITERBI;
|
|
*status |= FE_HAS_SYNC;
|
|
*status |= FE_HAS_LOCK;
|
|
|
|
c->cnr.stat[0].scale = FE_SCALE_DECIBEL;
|
|
c->cnr.stat[0].svalue = qam_status->snr_db_tenths / 10;
|
|
}
|
|
break;
|
|
case MXL_EAGLE_DEMOD_TYPE_OOB:
|
|
default:
|
|
break;
|
|
}
|
|
|
|
if ((*status & FE_HAS_LOCK) == 0) {
|
|
/* No lock, reset all statistics */
|
|
c->cnr.len = 1;
|
|
c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
c->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
c->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
return 0;
|
|
}
|
|
|
|
if (mxl_status)
|
|
dev_dbg(&dev->i2c_client->dev, "err %d\n", mxl_status);
|
|
else
|
|
mxl_status = mxl692_read_ber_ucb(fe);
|
|
|
|
return mxl_status;
|
|
}
|
|
|
|
static const struct dvb_frontend_ops mxl692_ops = {
|
|
.delsys = { SYS_ATSC },
|
|
.info = {
|
|
.name = "MaxLinear MxL692 VSB tuner-demodulator",
|
|
.frequency_min_hz = 54000000,
|
|
.frequency_max_hz = 858000000,
|
|
.frequency_stepsize_hz = 62500,
|
|
.caps = FE_CAN_8VSB
|
|
},
|
|
|
|
.init = mxl692_init,
|
|
.sleep = mxl692_sleep,
|
|
.set_frontend = mxl692_set_frontend,
|
|
.get_frontend = mxl692_get_frontend,
|
|
|
|
.read_status = mxl692_read_status,
|
|
.read_snr = mxl692_read_snr,
|
|
};
|
|
|
|
static int mxl692_probe(struct i2c_client *client)
|
|
{
|
|
struct mxl692_config *config = client->dev.platform_data;
|
|
struct mxl692_dev *dev;
|
|
int ret = 0;
|
|
|
|
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
|
|
if (!dev) {
|
|
ret = -ENOMEM;
|
|
dev_dbg(&client->dev, "kzalloc() failed\n");
|
|
goto err;
|
|
}
|
|
|
|
memcpy(&dev->fe.ops, &mxl692_ops, sizeof(struct dvb_frontend_ops));
|
|
dev->fe.demodulator_priv = dev;
|
|
dev->i2c_client = client;
|
|
*config->fe = &dev->fe;
|
|
mutex_init(&dev->i2c_lock);
|
|
i2c_set_clientdata(client, dev);
|
|
|
|
dev_info(&client->dev, "MaxLinear mxl692 successfully attached\n");
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed %d\n", ret);
|
|
return -ENODEV;
|
|
}
|
|
|
|
static void mxl692_remove(struct i2c_client *client)
|
|
{
|
|
struct mxl692_dev *dev = i2c_get_clientdata(client);
|
|
|
|
dev->fe.demodulator_priv = NULL;
|
|
i2c_set_clientdata(client, NULL);
|
|
kfree(dev);
|
|
}
|
|
|
|
static const struct i2c_device_id mxl692_id_table[] = {
|
|
{ "mxl692" },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, mxl692_id_table);
|
|
|
|
static struct i2c_driver mxl692_driver = {
|
|
.driver = {
|
|
.name = "mxl692",
|
|
},
|
|
.probe = mxl692_probe,
|
|
.remove = mxl692_remove,
|
|
.id_table = mxl692_id_table,
|
|
};
|
|
|
|
module_i2c_driver(mxl692_driver);
|
|
|
|
MODULE_AUTHOR("Brad Love <brad@nextdimension.cc>");
|
|
MODULE_DESCRIPTION("MaxLinear MxL692 demodulator/tuner driver");
|
|
MODULE_FIRMWARE(MXL692_FIRMWARE);
|
|
MODULE_LICENSE("GPL");
|