kevin/linux
1
Fork 0
Code
c289f4de8e
linux/drivers/gpu/drm/panel/panel-leadtek-ltk500hd1829.c
Douglas Anderson 3357f6f465 drm/panel: ltk500hd1829: Don't call unprepare+disable at shutdown/remove 
It's the responsibility of a correctly written DRM modeset driver to
call drm_atomic_helper_shutdown() at shutdown time and that should be
disabling / unpreparing the panel if needed. Panel drivers shouldn't
be calling these functions themselves.

A recent effort was made to fix as many DRM modeset drivers as
possible [1] [2] [3] and most drivers are fixed now.

Unfortunately, grepping mainline for this panel's compatible string
shows no hits, so we can't be 100% sure if the DRM modeset driver used
with this panel has been fixed. If it is found that the DRM modeset
driver hasn't been fixed then this patch could be temporarily reverted
until it is.

[1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org
[2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org
[3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503143327.RFT.v2.17.If3edcf846f754b425959980039372a9fd1599ecc@changeid
2024-05-28 13:09:11 -07:00

703 lines
14 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (c) 2019 Theobroma Systems Design und Consulting GmbH
*
* base on panel-kingdisplay-kd097d04.c
* Copyright (c) 2017, Fuzhou Rockchip Electronics Co., Ltd
*/
#include <linux/backlight.h>
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/regulator/consumer.h>
#include <video/mipi_display.h>
#include <drm/drm_crtc.h>
#include <drm/drm_device.h>
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_modes.h>
#include <drm/drm_panel.h>
struct ltk500hd1829_cmd {
char cmd;
char data;
};
struct ltk500hd1829_desc {
const struct drm_display_mode *mode;
const struct ltk500hd1829_cmd *init;
unsigned int num_init;
};
struct ltk500hd1829 {
struct device *dev;
struct drm_panel panel;
struct gpio_desc *reset_gpio;
struct regulator *vcc;
struct regulator *iovcc;
const struct ltk500hd1829_desc *panel_desc;
};
static const struct ltk500hd1829_cmd ltk101b4029w_init[] = {
/* Page0 */
{ 0xE0, 0x00 },
/* PASSWORD */
{ 0xE1, 0x93 },
{ 0xE2, 0x65 },
{ 0xE3, 0xF8 },
{ 0x80, 0x03 }, /* 0X03:4-LANE; 0X02:3-LANE; 0X01:2-LANE */
/* Page1 */
{ 0xE0, 0x01 },
/* Set VCOM */
{ 0x00, 0x00 },
{ 0x01, 0x6F },
/* Set Gamma Power, VGMP,VGMN,VGSP,VGSN */
{ 0x17, 0x00 },
{ 0x18, 0xAF }, /* 4.3V */
{ 0x19, 0x01 }, /* 0.3V */
{ 0x1A, 0x00 },
{ 0x1B, 0xAF }, /* 4.3V */
{ 0x1C, 0x01 }, /* 0.3V */
/* Set Gate Power */
{ 0x1F, 0x3E }, /* VGH_R = 15V */
{ 0x20, 0x28 }, /* VGL_R = -12V */
{ 0x21, 0x28 }, /* VGL_R2 = -12V */
{ 0x22, 0x7E },
/* SETPANEL */
{ 0x35, 0x26 },
{ 0x37, 0x09 },
/* SET RGBCYC */
{ 0x38, 0x04 },
{ 0x39, 0x00 },
{ 0x3A, 0x01 },
{ 0x3C, 0x7C },
{ 0x3D, 0xFF },
{ 0x3E, 0xFF },
{ 0x3F, 0x7F },
/* Set TCON */
{ 0x40, 0x06 }, /* RSO = 800 RGB */
{ 0x41, 0xA0 }, /* LN = 640->1280 line */
{ 0x42, 0x81 },
{ 0x43, 0x08 }, /* VFP = 8 */
{ 0x44, 0x0B }, /* VBP = 12 */
{ 0x45, 0x28 }, /* HBP = 40 */
/* power voltage */
{ 0x55, 0x0F }, /* DCDCM = 0001, JD PWR_IC */
{ 0x57, 0x69 },
{ 0x59, 0x0A }, /* VCL = -2.9V */
{ 0x5A, 0x28 }, /* VGH = 15V */
{ 0x5B, 0x14 }, /* VGL = -11V */
/* Gamma */
{ 0x5D, 0x7C },
{ 0x5E, 0x65 },
{ 0x5F, 0x55 },
{ 0x60, 0x47 },
{ 0x61, 0x43 },
{ 0x62, 0x32 },
{ 0x63, 0x34 },
{ 0x64, 0x1C },
{ 0x65, 0x33 },
{ 0x66, 0x31 },
{ 0x67, 0x30 },
{ 0x68, 0x4E },
{ 0x69, 0x3C },
{ 0x6A, 0x44 },
{ 0x6B, 0x35 },
{ 0x6C, 0x31 },
{ 0x6D, 0x23 },
{ 0x6E, 0x11 },
{ 0x6F, 0x00 },
{ 0x70, 0x7C },
{ 0x71, 0x65 },
{ 0x72, 0x55 },
{ 0x73, 0x47 },
{ 0x74, 0x43 },
{ 0x75, 0x32 },
{ 0x76, 0x34 },
{ 0x77, 0x1C },
{ 0x78, 0x33 },
{ 0x79, 0x31 },
{ 0x7A, 0x30 },
{ 0x7B, 0x4E },
{ 0x7C, 0x3C },
{ 0x7D, 0x44 },
{ 0x7E, 0x35 },
{ 0x7F, 0x31 },
{ 0x80, 0x23 },
{ 0x81, 0x11 },
{ 0x82, 0x00 },
/* Page2, for GIP */
{ 0xE0, 0x02 },
/* GIP_L Pin mapping */
{ 0x00, 0x1E },
{ 0x01, 0x1E },
{ 0x02, 0x41 },
{ 0x03, 0x41 },
{ 0x04, 0x43 },
{ 0x05, 0x43 },
{ 0x06, 0x1F },
{ 0x07, 0x1F },
{ 0x08, 0x35 },
{ 0x09, 0x1F },
{ 0x0A, 0x15 },
{ 0x0B, 0x15 },
{ 0x0C, 0x1F },
{ 0x0D, 0x47 },
{ 0x0E, 0x47 },
{ 0x0F, 0x45 },
{ 0x10, 0x45 },
{ 0x11, 0x4B },
{ 0x12, 0x4B },
{ 0x13, 0x49 },
{ 0x14, 0x49 },
{ 0x15, 0x1F },
/* GIP_R Pin mapping */
{ 0x16, 0x1E },
{ 0x17, 0x1E },
{ 0x18, 0x40 },
{ 0x19, 0x40 },
{ 0x1A, 0x42 },
{ 0x1B, 0x42 },
{ 0x1C, 0x1F },
{ 0x1D, 0x1F },
{ 0x1E, 0x35 },
{ 0x1F, 0x1F },
{ 0x20, 0x15 },
{ 0x21, 0x15 },
{ 0x22, 0x1f },
{ 0x23, 0x46 },
{ 0x24, 0x46 },
{ 0x25, 0x44 },
{ 0x26, 0x44 },
{ 0x27, 0x4A },
{ 0x28, 0x4A },
{ 0x29, 0x48 },
{ 0x2A, 0x48 },
{ 0x2B, 0x1F },
/* GIP Timing */
{ 0x58, 0x40 },
{ 0x5B, 0x30 },
{ 0x5C, 0x03 },
{ 0x5D, 0x30 },
{ 0x5E, 0x01 },
{ 0x5F, 0x02 },
{ 0x63, 0x14 },
{ 0x64, 0x6A },
{ 0x67, 0x73 },
{ 0x68, 0x05 },
{ 0x69, 0x14 },
{ 0x6A, 0x6A },
{ 0x6B, 0x08 },
{ 0x6C, 0x00 },
{ 0x6D, 0x00 },
{ 0x6E, 0x00 },
{ 0x6F, 0x88 },
{ 0x77, 0xDD },
{ 0x79, 0x0E },
{ 0x7A, 0x03 },
{ 0x7D, 0x14 },
{ 0x7E, 0x6A },
/* Page4 */
{ 0xE0, 0x04 },
{ 0x09, 0x11 },
{ 0x0E, 0x48 },
{ 0x2B, 0x2B },
{ 0x2D, 0x03 },
{ 0x2E, 0x44 },
/* Page0 */
{ 0xE0, 0x00 },
{ 0xE6, 0x02 },
{ 0xE7, 0x0C },
};
static const struct drm_display_mode ltk101b4029w_mode = {
.hdisplay = 800,
.hsync_start = 800 + 18,
.hsync_end = 800 + 18 + 18,
.htotal = 800 + 18 + 18 + 18,
.vdisplay = 1280,
.vsync_start = 1280 + 24,
.vsync_end = 1280 + 24 + 4,
.vtotal = 1280 + 24 + 4 + 8,
.clock = 67330,
.width_mm = 136,
.height_mm = 218,
};
static const struct ltk500hd1829_desc ltk101b4029w_data = {
.mode = &ltk101b4029w_mode,
.init = ltk101b4029w_init,
.num_init = ARRAY_SIZE(ltk101b4029w_init),
};
/*
* There is no description in the Reference Manual about these commands.
* We received them from the vendor, so just use them as is.
*/
static const struct ltk500hd1829_cmd ltk500hd1829_init[] = {
{ 0xE0, 0x00 },
{ 0xE1, 0x93 },
{ 0xE2, 0x65 },
{ 0xE3, 0xF8 },
{ 0x80, 0x03 },
{ 0xE0, 0x04 },
{ 0x2D, 0x03 },
{ 0xE0, 0x01 },
{ 0x00, 0x00 },
{ 0x01, 0xB6 },
{ 0x03, 0x00 },
{ 0x04, 0xC5 },
{ 0x17, 0x00 },
{ 0x18, 0xBF },
{ 0x19, 0x01 },
{ 0x1A, 0x00 },
{ 0x1B, 0xBF },
{ 0x1C, 0x01 },
{ 0x1F, 0x7C },
{ 0x20, 0x26 },
{ 0x21, 0x26 },
{ 0x22, 0x4E },
{ 0x37, 0x09 },
{ 0x38, 0x04 },
{ 0x39, 0x08 },
{ 0x3A, 0x1F },
{ 0x3B, 0x1F },
{ 0x3C, 0x78 },
{ 0x3D, 0xFF },
{ 0x3E, 0xFF },
{ 0x3F, 0x00 },
{ 0x40, 0x04 },
{ 0x41, 0xA0 },
{ 0x43, 0x0F },
{ 0x44, 0x0A },
{ 0x45, 0x24 },
{ 0x55, 0x01 },
{ 0x56, 0x01 },
{ 0x57, 0xA5 },
{ 0x58, 0x0A },
{ 0x59, 0x4A },
{ 0x5A, 0x38 },
{ 0x5B, 0x10 },
{ 0x5C, 0x19 },
{ 0x5D, 0x7C },
{ 0x5E, 0x64 },
{ 0x5F, 0x54 },
{ 0x60, 0x48 },
{ 0x61, 0x44 },
{ 0x62, 0x35 },
{ 0x63, 0x3A },
{ 0x64, 0x24 },
{ 0x65, 0x3B },
{ 0x66, 0x39 },
{ 0x67, 0x37 },
{ 0x68, 0x56 },
{ 0x69, 0x41 },
{ 0x6A, 0x47 },
{ 0x6B, 0x2F },
{ 0x6C, 0x23 },
{ 0x6D, 0x13 },
{ 0x6E, 0x02 },
{ 0x6F, 0x08 },
{ 0x70, 0x7C },
{ 0x71, 0x64 },
{ 0x72, 0x54 },
{ 0x73, 0x48 },
{ 0x74, 0x44 },
{ 0x75, 0x35 },
{ 0x76, 0x3A },
{ 0x77, 0x22 },
{ 0x78, 0x3B },
{ 0x79, 0x39 },
{ 0x7A, 0x38 },
{ 0x7B, 0x52 },
{ 0x7C, 0x41 },
{ 0x7D, 0x47 },
{ 0x7E, 0x2F },
{ 0x7F, 0x23 },
{ 0x80, 0x13 },
{ 0x81, 0x02 },
{ 0x82, 0x08 },
{ 0xE0, 0x02 },
{ 0x00, 0x57 },
{ 0x01, 0x77 },
{ 0x02, 0x44 },
{ 0x03, 0x46 },
{ 0x04, 0x48 },
{ 0x05, 0x4A },
{ 0x06, 0x4C },
{ 0x07, 0x4E },
{ 0x08, 0x50 },
{ 0x09, 0x55 },
{ 0x0A, 0x52 },
{ 0x0B, 0x55 },
{ 0x0C, 0x55 },
{ 0x0D, 0x55 },
{ 0x0E, 0x55 },
{ 0x0F, 0x55 },
{ 0x10, 0x55 },
{ 0x11, 0x55 },
{ 0x12, 0x55 },
{ 0x13, 0x40 },
{ 0x14, 0x55 },
{ 0x15, 0x55 },
{ 0x16, 0x57 },
{ 0x17, 0x77 },
{ 0x18, 0x45 },
{ 0x19, 0x47 },
{ 0x1A, 0x49 },
{ 0x1B, 0x4B },
{ 0x1C, 0x4D },
{ 0x1D, 0x4F },
{ 0x1E, 0x51 },
{ 0x1F, 0x55 },
{ 0x20, 0x53 },
{ 0x21, 0x55 },
{ 0x22, 0x55 },
{ 0x23, 0x55 },
{ 0x24, 0x55 },
{ 0x25, 0x55 },
{ 0x26, 0x55 },
{ 0x27, 0x55 },
{ 0x28, 0x55 },
{ 0x29, 0x41 },
{ 0x2A, 0x55 },
{ 0x2B, 0x55 },
{ 0x2C, 0x57 },
{ 0x2D, 0x77 },
{ 0x2E, 0x4F },
{ 0x2F, 0x4D },
{ 0x30, 0x4B },
{ 0x31, 0x49 },
{ 0x32, 0x47 },
{ 0x33, 0x45 },
{ 0x34, 0x41 },
{ 0x35, 0x55 },
{ 0x36, 0x53 },
{ 0x37, 0x55 },
{ 0x38, 0x55 },
{ 0x39, 0x55 },
{ 0x3A, 0x55 },
{ 0x3B, 0x55 },
{ 0x3C, 0x55 },
{ 0x3D, 0x55 },
{ 0x3E, 0x55 },
{ 0x3F, 0x51 },
{ 0x40, 0x55 },
{ 0x41, 0x55 },
{ 0x42, 0x57 },
{ 0x43, 0x77 },
{ 0x44, 0x4E },
{ 0x45, 0x4C },
{ 0x46, 0x4A },
{ 0x47, 0x48 },
{ 0x48, 0x46 },
{ 0x49, 0x44 },
{ 0x4A, 0x40 },
{ 0x4B, 0x55 },
{ 0x4C, 0x52 },
{ 0x4D, 0x55 },
{ 0x4E, 0x55 },
{ 0x4F, 0x55 },
{ 0x50, 0x55 },
{ 0x51, 0x55 },
{ 0x52, 0x55 },
{ 0x53, 0x55 },
{ 0x54, 0x55 },
{ 0x55, 0x50 },
{ 0x56, 0x55 },
{ 0x57, 0x55 },
{ 0x58, 0x40 },
{ 0x59, 0x00 },
{ 0x5A, 0x00 },
{ 0x5B, 0x10 },
{ 0x5C, 0x09 },
{ 0x5D, 0x30 },
{ 0x5E, 0x01 },
{ 0x5F, 0x02 },
{ 0x60, 0x30 },
{ 0x61, 0x03 },
{ 0x62, 0x04 },
{ 0x63, 0x06 },
{ 0x64, 0x6A },
{ 0x65, 0x75 },
{ 0x66, 0x0F },
{ 0x67, 0xB3 },
{ 0x68, 0x0B },
{ 0x69, 0x06 },
{ 0x6A, 0x6A },
{ 0x6B, 0x10 },
{ 0x6C, 0x00 },
{ 0x6D, 0x04 },
{ 0x6E, 0x04 },
{ 0x6F, 0x88 },
{ 0x70, 0x00 },
{ 0x71, 0x00 },
{ 0x72, 0x06 },
{ 0x73, 0x7B },
{ 0x74, 0x00 },
{ 0x75, 0xBC },
{ 0x76, 0x00 },
{ 0x77, 0x05 },
{ 0x78, 0x2E },
{ 0x79, 0x00 },
{ 0x7A, 0x00 },
{ 0x7B, 0x00 },
{ 0x7C, 0x00 },
{ 0x7D, 0x03 },
{ 0x7E, 0x7B },
{ 0xE0, 0x04 },
{ 0x09, 0x10 },
{ 0x2B, 0x2B },
{ 0x2E, 0x44 },
{ 0xE0, 0x00 },
{ 0xE6, 0x02 },
{ 0xE7, 0x02 },
{ 0x35, 0x00 },
};
static const struct drm_display_mode ltk500hd1829_mode = {
.hdisplay = 720,
.hsync_start = 720 + 50,
.hsync_end = 720 + 50 + 50,
.htotal = 720 + 50 + 50 + 50,
.vdisplay = 1280,
.vsync_start = 1280 + 30,
.vsync_end = 1280 + 30 + 4,
.vtotal = 1280 + 30 + 4 + 12,
.clock = 69217,
.width_mm = 62,
.height_mm = 110,
};
static const struct ltk500hd1829_desc ltk500hd1829_data = {
.mode = &ltk500hd1829_mode,
.init = ltk500hd1829_init,
.num_init = ARRAY_SIZE(ltk500hd1829_init),
};
static inline
struct ltk500hd1829 *panel_to_ltk500hd1829(struct drm_panel *panel)
{
return container_of(panel, struct ltk500hd1829, panel);
}
static int ltk500hd1829_unprepare(struct drm_panel *panel)
{
struct ltk500hd1829 *ctx = panel_to_ltk500hd1829(panel);
struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
int ret;
ret = mipi_dsi_dcs_set_display_off(dsi);
if (ret < 0)
dev_err(panel->dev, "failed to set display off: %d\n", ret);
ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
if (ret < 0) {
dev_err(panel->dev, "failed to enter sleep mode: %d\n", ret);
}
/* 120ms to enter sleep mode */
msleep(120);
regulator_disable(ctx->iovcc);
regulator_disable(ctx->vcc);
return 0;
}
static int ltk500hd1829_prepare(struct drm_panel *panel)
{
struct ltk500hd1829 *ctx = panel_to_ltk500hd1829(panel);
struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
unsigned int i;
int ret;
ret = regulator_enable(ctx->vcc);
if (ret < 0) {
dev_err(ctx->dev, "Failed to enable vci supply: %d\n", ret);
return ret;
}
ret = regulator_enable(ctx->iovcc);
if (ret < 0) {
dev_err(ctx->dev, "Failed to enable iovcc supply: %d\n", ret);
goto disable_vcc;
}
gpiod_set_value_cansleep(ctx->reset_gpio, 1);
/* tRW: 10us */
usleep_range(10, 20);
gpiod_set_value_cansleep(ctx->reset_gpio, 0);
/* tRT: >= 5ms */
usleep_range(5000, 6000);
for (i = 0; i < ctx->panel_desc->num_init; i++) {
ret = mipi_dsi_generic_write(dsi, &ctx->panel_desc->init[i],
sizeof(struct ltk500hd1829_cmd));
if (ret < 0) {
dev_err(panel->dev, "failed to write init cmds: %d\n", ret);
goto disable_iovcc;
}
}
ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
if (ret < 0) {
dev_err(panel->dev, "failed to exit sleep mode: %d\n", ret);
goto disable_iovcc;
}
/* 120ms to exit sleep mode */
msleep(120);
ret = mipi_dsi_dcs_set_display_on(dsi);
if (ret < 0) {
dev_err(panel->dev, "failed to set display on: %d\n", ret);
goto disable_iovcc;
}
return 0;
disable_iovcc:
regulator_disable(ctx->iovcc);
disable_vcc:
regulator_disable(ctx->vcc);
return ret;
}
static int ltk500hd1829_get_modes(struct drm_panel *panel,
struct drm_connector *connector)
{
struct ltk500hd1829 *ctx = panel_to_ltk500hd1829(panel);
struct drm_display_mode *mode;
mode = drm_mode_duplicate(connector->dev, ctx->panel_desc->mode);
if (!mode) {
dev_err(ctx->dev, "failed to add mode %ux%u@%u\n",
ctx->panel_desc->mode->hdisplay, ctx->panel_desc->mode->vdisplay,
drm_mode_vrefresh(ctx->panel_desc->mode));
return -ENOMEM;
}
drm_mode_set_name(mode);
mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
connector->display_info.width_mm = mode->width_mm;
connector->display_info.height_mm = mode->height_mm;
drm_mode_probed_add(connector, mode);
return 1;
}
static const struct drm_panel_funcs ltk500hd1829_funcs = {
.unprepare = ltk500hd1829_unprepare,
.prepare = ltk500hd1829_prepare,
.get_modes = ltk500hd1829_get_modes,
};
static int ltk500hd1829_probe(struct mipi_dsi_device *dsi)
{
struct ltk500hd1829 *ctx;
struct device *dev = &dsi->dev;
int ret;
ctx = devm_kzalloc(&dsi->dev, sizeof(*ctx), GFP_KERNEL);
if (!ctx)
return -ENOMEM;
ctx->panel_desc = of_device_get_match_data(dev);
if (!ctx->panel_desc)
return -EINVAL;
ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(ctx->reset_gpio)) {
dev_err(dev, "cannot get reset gpio\n");
return PTR_ERR(ctx->reset_gpio);
}
ctx->vcc = devm_regulator_get(dev, "vcc");
if (IS_ERR(ctx->vcc)) {
ret = PTR_ERR(ctx->vcc);
if (ret != -EPROBE_DEFER)
dev_err(dev, "Failed to request vcc regulator: %d\n", ret);
return ret;
}
ctx->iovcc = devm_regulator_get(dev, "iovcc");
if (IS_ERR(ctx->iovcc)) {
ret = PTR_ERR(ctx->iovcc);
if (ret != -EPROBE_DEFER)
dev_err(dev, "Failed to request iovcc regulator: %d\n", ret);
return ret;
}
mipi_dsi_set_drvdata(dsi, ctx);
ctx->dev = dev;
dsi->lanes = 4;
dsi->format = MIPI_DSI_FMT_RGB888;
dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_NO_EOT_PACKET;
drm_panel_init(&ctx->panel, &dsi->dev, &ltk500hd1829_funcs,
DRM_MODE_CONNECTOR_DSI);
ret = drm_panel_of_backlight(&ctx->panel);
if (ret)
return ret;
drm_panel_add(&ctx->panel);
ret = mipi_dsi_attach(dsi);
if (ret < 0) {
dev_err(dev, "mipi_dsi_attach failed: %d\n", ret);
drm_panel_remove(&ctx->panel);
return ret;
}
return 0;
}
static void ltk500hd1829_remove(struct mipi_dsi_device *dsi)
{
struct ltk500hd1829 *ctx = mipi_dsi_get_drvdata(dsi);
int ret;
ret = mipi_dsi_detach(dsi);
if (ret < 0)
dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", ret);
drm_panel_remove(&ctx->panel);
}
static const struct of_device_id ltk500hd1829_of_match[] = {
{
.compatible = "leadtek,ltk101b4029w",
.data = &ltk101b4029w_data,
},
{
.compatible = "leadtek,ltk500hd1829",
.data = &ltk500hd1829_data,
},
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, ltk500hd1829_of_match);
static struct mipi_dsi_driver ltk500hd1829_driver = {
.driver = {
.name = "panel-leadtek-ltk500hd1829",
.of_match_table = ltk500hd1829_of_match,
},
.probe = ltk500hd1829_probe,
.remove = ltk500hd1829_remove,
};
module_mipi_dsi_driver(ltk500hd1829_driver);
MODULE_AUTHOR("Heiko Stuebner <heiko.stuebner@theobroma-systems.com>");
MODULE_DESCRIPTION("Leadtek LTK500HD1829 panel driver");
MODULE_LICENSE("GPL v2");
View Git Blame Copy Permalink