a96cbb146a
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Acked-by: Dinh Nguyen <dinguyen@kernel.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> # samsung Acked-by: Heiko Stuebner <heiko@sntech.de> #rockchip Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # versaclock5 Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230718143156.1066339-1-robh@kernel.org Acked-by: Abel Vesa <abel.vesa@linaro.org> #imx Signed-off-by: Stephen Boyd <sboyd@kernel.org>
334 lines
8.3 KiB
C
334 lines
8.3 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Synopsys AXS10X SDP Generic PLL clock driver
|
|
*
|
|
* Copyright (C) 2017 Synopsys
|
|
*/
|
|
|
|
#include <linux/platform_device.h>
|
|
#include <linux/module.h>
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/device.h>
|
|
#include <linux/io.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/slab.h>
|
|
|
|
/* PLL registers addresses */
|
|
#define PLL_REG_IDIV 0x0
|
|
#define PLL_REG_FBDIV 0x4
|
|
#define PLL_REG_ODIV 0x8
|
|
|
|
/*
|
|
* Bit fields of the PLL IDIV/FBDIV/ODIV registers:
|
|
* ________________________________________________________________________
|
|
* |31 15| 14 | 13 | 12 |11 6|5 0|
|
|
* |-------RESRVED------|-NOUPDATE-|-BYPASS-|-EDGE-|--HIGHTIME--|--LOWTIME--|
|
|
* |____________________|__________|________|______|____________|___________|
|
|
*
|
|
* Following macros determine the way of access to these registers
|
|
* They should be set up only using the macros.
|
|
* reg should be an u32 variable.
|
|
*/
|
|
|
|
#define PLL_REG_GET_LOW(reg) \
|
|
(((reg) & (0x3F << 0)) >> 0)
|
|
#define PLL_REG_GET_HIGH(reg) \
|
|
(((reg) & (0x3F << 6)) >> 6)
|
|
#define PLL_REG_GET_EDGE(reg) \
|
|
(((reg) & (BIT(12))) ? 1 : 0)
|
|
#define PLL_REG_GET_BYPASS(reg) \
|
|
(((reg) & (BIT(13))) ? 1 : 0)
|
|
#define PLL_REG_GET_NOUPD(reg) \
|
|
(((reg) & (BIT(14))) ? 1 : 0)
|
|
#define PLL_REG_GET_PAD(reg) \
|
|
(((reg) & (0x1FFFF << 15)) >> 15)
|
|
|
|
#define PLL_REG_SET_LOW(reg, value) \
|
|
{ reg |= (((value) & 0x3F) << 0); }
|
|
#define PLL_REG_SET_HIGH(reg, value) \
|
|
{ reg |= (((value) & 0x3F) << 6); }
|
|
#define PLL_REG_SET_EDGE(reg, value) \
|
|
{ reg |= (((value) & 0x01) << 12); }
|
|
#define PLL_REG_SET_BYPASS(reg, value) \
|
|
{ reg |= (((value) & 0x01) << 13); }
|
|
#define PLL_REG_SET_NOUPD(reg, value) \
|
|
{ reg |= (((value) & 0x01) << 14); }
|
|
#define PLL_REG_SET_PAD(reg, value) \
|
|
{ reg |= (((value) & 0x1FFFF) << 15); }
|
|
|
|
#define PLL_LOCK BIT(0)
|
|
#define PLL_ERROR BIT(1)
|
|
#define PLL_MAX_LOCK_TIME 100 /* 100 us */
|
|
|
|
struct axs10x_pll_cfg {
|
|
u32 rate;
|
|
u32 idiv;
|
|
u32 fbdiv;
|
|
u32 odiv;
|
|
};
|
|
|
|
static const struct axs10x_pll_cfg arc_pll_cfg[] = {
|
|
{ 33333333, 1, 1, 1 },
|
|
{ 50000000, 1, 30, 20 },
|
|
{ 75000000, 2, 45, 10 },
|
|
{ 90000000, 2, 54, 10 },
|
|
{ 100000000, 1, 30, 10 },
|
|
{ 125000000, 2, 45, 6 },
|
|
{}
|
|
};
|
|
|
|
static const struct axs10x_pll_cfg pgu_pll_cfg[] = {
|
|
{ 25200000, 1, 84, 90 },
|
|
{ 50000000, 1, 100, 54 },
|
|
{ 74250000, 1, 44, 16 },
|
|
{}
|
|
};
|
|
|
|
struct axs10x_pll_clk {
|
|
struct clk_hw hw;
|
|
void __iomem *base;
|
|
void __iomem *lock;
|
|
const struct axs10x_pll_cfg *pll_cfg;
|
|
struct device *dev;
|
|
};
|
|
|
|
static inline void axs10x_pll_write(struct axs10x_pll_clk *clk, u32 reg,
|
|
u32 val)
|
|
{
|
|
iowrite32(val, clk->base + reg);
|
|
}
|
|
|
|
static inline u32 axs10x_pll_read(struct axs10x_pll_clk *clk, u32 reg)
|
|
{
|
|
return ioread32(clk->base + reg);
|
|
}
|
|
|
|
static inline struct axs10x_pll_clk *to_axs10x_pll_clk(struct clk_hw *hw)
|
|
{
|
|
return container_of(hw, struct axs10x_pll_clk, hw);
|
|
}
|
|
|
|
static inline u32 axs10x_div_get_value(u32 reg)
|
|
{
|
|
if (PLL_REG_GET_BYPASS(reg))
|
|
return 1;
|
|
|
|
return PLL_REG_GET_HIGH(reg) + PLL_REG_GET_LOW(reg);
|
|
}
|
|
|
|
static inline u32 axs10x_encode_div(unsigned int id, int upd)
|
|
{
|
|
u32 div = 0;
|
|
|
|
PLL_REG_SET_LOW(div, (id % 2 == 0) ? id >> 1 : (id >> 1) + 1);
|
|
PLL_REG_SET_HIGH(div, id >> 1);
|
|
PLL_REG_SET_EDGE(div, id % 2);
|
|
PLL_REG_SET_BYPASS(div, id == 1 ? 1 : 0);
|
|
PLL_REG_SET_NOUPD(div, upd == 0 ? 1 : 0);
|
|
|
|
return div;
|
|
}
|
|
|
|
static unsigned long axs10x_pll_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
u64 rate;
|
|
u32 idiv, fbdiv, odiv;
|
|
struct axs10x_pll_clk *clk = to_axs10x_pll_clk(hw);
|
|
|
|
idiv = axs10x_div_get_value(axs10x_pll_read(clk, PLL_REG_IDIV));
|
|
fbdiv = axs10x_div_get_value(axs10x_pll_read(clk, PLL_REG_FBDIV));
|
|
odiv = axs10x_div_get_value(axs10x_pll_read(clk, PLL_REG_ODIV));
|
|
|
|
rate = (u64)parent_rate * fbdiv;
|
|
do_div(rate, idiv * odiv);
|
|
|
|
return rate;
|
|
}
|
|
|
|
static long axs10x_pll_round_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long *prate)
|
|
{
|
|
int i;
|
|
long best_rate;
|
|
struct axs10x_pll_clk *clk = to_axs10x_pll_clk(hw);
|
|
const struct axs10x_pll_cfg *pll_cfg = clk->pll_cfg;
|
|
|
|
if (pll_cfg[0].rate == 0)
|
|
return -EINVAL;
|
|
|
|
best_rate = pll_cfg[0].rate;
|
|
|
|
for (i = 1; pll_cfg[i].rate != 0; i++) {
|
|
if (abs(rate - pll_cfg[i].rate) < abs(rate - best_rate))
|
|
best_rate = pll_cfg[i].rate;
|
|
}
|
|
|
|
return best_rate;
|
|
}
|
|
|
|
static int axs10x_pll_set_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long parent_rate)
|
|
{
|
|
int i;
|
|
struct axs10x_pll_clk *clk = to_axs10x_pll_clk(hw);
|
|
const struct axs10x_pll_cfg *pll_cfg = clk->pll_cfg;
|
|
|
|
for (i = 0; pll_cfg[i].rate != 0; i++) {
|
|
if (pll_cfg[i].rate == rate) {
|
|
axs10x_pll_write(clk, PLL_REG_IDIV,
|
|
axs10x_encode_div(pll_cfg[i].idiv, 0));
|
|
axs10x_pll_write(clk, PLL_REG_FBDIV,
|
|
axs10x_encode_div(pll_cfg[i].fbdiv, 0));
|
|
axs10x_pll_write(clk, PLL_REG_ODIV,
|
|
axs10x_encode_div(pll_cfg[i].odiv, 1));
|
|
|
|
/*
|
|
* Wait until CGU relocks and check error status.
|
|
* If after timeout CGU is unlocked yet return error
|
|
*/
|
|
udelay(PLL_MAX_LOCK_TIME);
|
|
if (!(ioread32(clk->lock) & PLL_LOCK))
|
|
return -ETIMEDOUT;
|
|
|
|
if (ioread32(clk->lock) & PLL_ERROR)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
dev_err(clk->dev, "invalid rate=%ld, parent_rate=%ld\n", rate,
|
|
parent_rate);
|
|
return -EINVAL;
|
|
}
|
|
|
|
static const struct clk_ops axs10x_pll_ops = {
|
|
.recalc_rate = axs10x_pll_recalc_rate,
|
|
.round_rate = axs10x_pll_round_rate,
|
|
.set_rate = axs10x_pll_set_rate,
|
|
};
|
|
|
|
static int axs10x_pll_clk_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
const char *parent_name;
|
|
struct axs10x_pll_clk *pll_clk;
|
|
struct clk_init_data init = { };
|
|
int ret;
|
|
|
|
pll_clk = devm_kzalloc(dev, sizeof(*pll_clk), GFP_KERNEL);
|
|
if (!pll_clk)
|
|
return -ENOMEM;
|
|
|
|
pll_clk->base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(pll_clk->base))
|
|
return PTR_ERR(pll_clk->base);
|
|
|
|
pll_clk->lock = devm_platform_ioremap_resource(pdev, 1);
|
|
if (IS_ERR(pll_clk->lock))
|
|
return PTR_ERR(pll_clk->lock);
|
|
|
|
init.name = dev->of_node->name;
|
|
init.ops = &axs10x_pll_ops;
|
|
parent_name = of_clk_get_parent_name(dev->of_node, 0);
|
|
init.parent_names = &parent_name;
|
|
init.num_parents = 1;
|
|
pll_clk->hw.init = &init;
|
|
pll_clk->dev = dev;
|
|
pll_clk->pll_cfg = of_device_get_match_data(dev);
|
|
|
|
if (!pll_clk->pll_cfg) {
|
|
dev_err(dev, "No OF match data provided\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = devm_clk_hw_register(dev, &pll_clk->hw);
|
|
if (ret) {
|
|
dev_err(dev, "failed to register %s clock\n", init.name);
|
|
return ret;
|
|
}
|
|
|
|
return devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get,
|
|
&pll_clk->hw);
|
|
}
|
|
|
|
static void __init of_axs10x_pll_clk_setup(struct device_node *node)
|
|
{
|
|
const char *parent_name;
|
|
struct axs10x_pll_clk *pll_clk;
|
|
struct clk_init_data init = { };
|
|
int ret;
|
|
|
|
pll_clk = kzalloc(sizeof(*pll_clk), GFP_KERNEL);
|
|
if (!pll_clk)
|
|
return;
|
|
|
|
pll_clk->base = of_iomap(node, 0);
|
|
if (!pll_clk->base) {
|
|
pr_err("failed to map pll div registers\n");
|
|
goto err_free_pll_clk;
|
|
}
|
|
|
|
pll_clk->lock = of_iomap(node, 1);
|
|
if (!pll_clk->lock) {
|
|
pr_err("failed to map pll lock register\n");
|
|
goto err_unmap_base;
|
|
}
|
|
|
|
init.name = node->name;
|
|
init.ops = &axs10x_pll_ops;
|
|
parent_name = of_clk_get_parent_name(node, 0);
|
|
init.parent_names = &parent_name;
|
|
init.num_parents = parent_name ? 1 : 0;
|
|
pll_clk->hw.init = &init;
|
|
pll_clk->pll_cfg = arc_pll_cfg;
|
|
|
|
ret = clk_hw_register(NULL, &pll_clk->hw);
|
|
if (ret) {
|
|
pr_err("failed to register %pOFn clock\n", node);
|
|
goto err_unmap_lock;
|
|
}
|
|
|
|
ret = of_clk_add_hw_provider(node, of_clk_hw_simple_get, &pll_clk->hw);
|
|
if (ret) {
|
|
pr_err("failed to add hw provider for %pOFn clock\n", node);
|
|
goto err_unregister_clk;
|
|
}
|
|
|
|
return;
|
|
|
|
err_unregister_clk:
|
|
clk_hw_unregister(&pll_clk->hw);
|
|
err_unmap_lock:
|
|
iounmap(pll_clk->lock);
|
|
err_unmap_base:
|
|
iounmap(pll_clk->base);
|
|
err_free_pll_clk:
|
|
kfree(pll_clk);
|
|
}
|
|
CLK_OF_DECLARE(axs10x_pll_clock, "snps,axs10x-arc-pll-clock",
|
|
of_axs10x_pll_clk_setup);
|
|
|
|
static const struct of_device_id axs10x_pll_clk_id[] = {
|
|
{ .compatible = "snps,axs10x-pgu-pll-clock", .data = &pgu_pll_cfg},
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, axs10x_pll_clk_id);
|
|
|
|
static struct platform_driver axs10x_pll_clk_driver = {
|
|
.driver = {
|
|
.name = "axs10x-pll-clock",
|
|
.of_match_table = axs10x_pll_clk_id,
|
|
},
|
|
.probe = axs10x_pll_clk_probe,
|
|
};
|
|
builtin_platform_driver(axs10x_pll_clk_driver);
|
|
|
|
MODULE_AUTHOR("Vlad Zakharov <vzakhar@synopsys.com>");
|
|
MODULE_DESCRIPTION("Synopsys AXS10X SDP Generic PLL Clock Driver");
|
|
MODULE_LICENSE("GPL v2");
|