5b54814022
Convert magic values 1 and -1 to NETDEV_TX_BUSY and NETDEV_TX_LOCKED respectively. 0 (NETDEV_TX_OK) is not changed to keep the noise down, except in very few cases where its in direct proximity to one of the other values. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
846 lines
20 KiB
C
846 lines
20 KiB
C
/*
|
|
* Alchemy Semi Au1000 IrDA driver
|
|
*
|
|
* Copyright 2001 MontaVista Software Inc.
|
|
* Author: MontaVista Software, Inc.
|
|
* ppopov@mvista.com or source@mvista.com
|
|
*
|
|
* This program is free software; you can distribute it and/or modify it
|
|
* under the terms of the GNU General Public License (Version 2) as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
|
* for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/init.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/rtnetlink.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/bitops.h>
|
|
|
|
#include <asm/irq.h>
|
|
#include <asm/io.h>
|
|
#include <asm/au1000.h>
|
|
#if defined(CONFIG_MIPS_PB1000) || defined(CONFIG_MIPS_PB1100)
|
|
#include <asm/pb1000.h>
|
|
#elif defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100)
|
|
#include <asm/db1x00.h>
|
|
#else
|
|
#error au1k_ir: unsupported board
|
|
#endif
|
|
|
|
#include <net/irda/irda.h>
|
|
#include <net/irda/irmod.h>
|
|
#include <net/irda/wrapper.h>
|
|
#include <net/irda/irda_device.h>
|
|
#include "au1000_ircc.h"
|
|
|
|
static int au1k_irda_net_init(struct net_device *);
|
|
static int au1k_irda_start(struct net_device *);
|
|
static int au1k_irda_stop(struct net_device *dev);
|
|
static int au1k_irda_hard_xmit(struct sk_buff *, struct net_device *);
|
|
static int au1k_irda_rx(struct net_device *);
|
|
static void au1k_irda_interrupt(int, void *);
|
|
static void au1k_tx_timeout(struct net_device *);
|
|
static int au1k_irda_ioctl(struct net_device *, struct ifreq *, int);
|
|
static int au1k_irda_set_speed(struct net_device *dev, int speed);
|
|
|
|
static void *dma_alloc(size_t, dma_addr_t *);
|
|
static void dma_free(void *, size_t);
|
|
|
|
static int qos_mtt_bits = 0x07; /* 1 ms or more */
|
|
static struct net_device *ir_devs[NUM_IR_IFF];
|
|
static char version[] __devinitdata =
|
|
"au1k_ircc:1.2 ppopov@mvista.com\n";
|
|
|
|
#define RUN_AT(x) (jiffies + (x))
|
|
|
|
#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100)
|
|
static BCSR * const bcsr = (BCSR *)0xAE000000;
|
|
#endif
|
|
|
|
static DEFINE_SPINLOCK(ir_lock);
|
|
|
|
/*
|
|
* IrDA peripheral bug. You have to read the register
|
|
* twice to get the right value.
|
|
*/
|
|
u32 read_ir_reg(u32 addr)
|
|
{
|
|
readl(addr);
|
|
return readl(addr);
|
|
}
|
|
|
|
|
|
/*
|
|
* Buffer allocation/deallocation routines. The buffer descriptor returned
|
|
* has the virtual and dma address of a buffer suitable for
|
|
* both, receive and transmit operations.
|
|
*/
|
|
static db_dest_t *GetFreeDB(struct au1k_private *aup)
|
|
{
|
|
db_dest_t *pDB;
|
|
pDB = aup->pDBfree;
|
|
|
|
if (pDB) {
|
|
aup->pDBfree = pDB->pnext;
|
|
}
|
|
return pDB;
|
|
}
|
|
|
|
static void ReleaseDB(struct au1k_private *aup, db_dest_t *pDB)
|
|
{
|
|
db_dest_t *pDBfree = aup->pDBfree;
|
|
if (pDBfree)
|
|
pDBfree->pnext = pDB;
|
|
aup->pDBfree = pDB;
|
|
}
|
|
|
|
|
|
/*
|
|
DMA memory allocation, derived from pci_alloc_consistent.
|
|
However, the Au1000 data cache is coherent (when programmed
|
|
so), therefore we return KSEG0 address, not KSEG1.
|
|
*/
|
|
static void *dma_alloc(size_t size, dma_addr_t * dma_handle)
|
|
{
|
|
void *ret;
|
|
int gfp = GFP_ATOMIC | GFP_DMA;
|
|
|
|
ret = (void *) __get_free_pages(gfp, get_order(size));
|
|
|
|
if (ret != NULL) {
|
|
memset(ret, 0, size);
|
|
*dma_handle = virt_to_bus(ret);
|
|
ret = (void *)KSEG0ADDR(ret);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
|
|
static void dma_free(void *vaddr, size_t size)
|
|
{
|
|
vaddr = (void *)KSEG0ADDR(vaddr);
|
|
free_pages((unsigned long) vaddr, get_order(size));
|
|
}
|
|
|
|
|
|
static void
|
|
setup_hw_rings(struct au1k_private *aup, u32 rx_base, u32 tx_base)
|
|
{
|
|
int i;
|
|
for (i=0; i<NUM_IR_DESC; i++) {
|
|
aup->rx_ring[i] = (volatile ring_dest_t *)
|
|
(rx_base + sizeof(ring_dest_t)*i);
|
|
}
|
|
for (i=0; i<NUM_IR_DESC; i++) {
|
|
aup->tx_ring[i] = (volatile ring_dest_t *)
|
|
(tx_base + sizeof(ring_dest_t)*i);
|
|
}
|
|
}
|
|
|
|
static int au1k_irda_init(void)
|
|
{
|
|
static unsigned version_printed = 0;
|
|
struct au1k_private *aup;
|
|
struct net_device *dev;
|
|
int err;
|
|
|
|
if (version_printed++ == 0) printk(version);
|
|
|
|
dev = alloc_irdadev(sizeof(struct au1k_private));
|
|
if (!dev)
|
|
return -ENOMEM;
|
|
|
|
dev->irq = AU1000_IRDA_RX_INT; /* TX has its own interrupt */
|
|
err = au1k_irda_net_init(dev);
|
|
if (err)
|
|
goto out;
|
|
err = register_netdev(dev);
|
|
if (err)
|
|
goto out1;
|
|
ir_devs[0] = dev;
|
|
printk(KERN_INFO "IrDA: Registered device %s\n", dev->name);
|
|
return 0;
|
|
|
|
out1:
|
|
aup = netdev_priv(dev);
|
|
dma_free((void *)aup->db[0].vaddr,
|
|
MAX_BUF_SIZE * 2*NUM_IR_DESC);
|
|
dma_free((void *)aup->rx_ring[0],
|
|
2 * MAX_NUM_IR_DESC*(sizeof(ring_dest_t)));
|
|
kfree(aup->rx_buff.head);
|
|
out:
|
|
free_netdev(dev);
|
|
return err;
|
|
}
|
|
|
|
static int au1k_irda_init_iobuf(iobuff_t *io, int size)
|
|
{
|
|
io->head = kmalloc(size, GFP_KERNEL);
|
|
if (io->head != NULL) {
|
|
io->truesize = size;
|
|
io->in_frame = FALSE;
|
|
io->state = OUTSIDE_FRAME;
|
|
io->data = io->head;
|
|
}
|
|
return io->head ? 0 : -ENOMEM;
|
|
}
|
|
|
|
static const struct net_device_ops au1k_irda_netdev_ops = {
|
|
.ndo_open = au1k_irda_start,
|
|
.ndo_stop = au1k_irda_stop,
|
|
.ndo_start_xmit = au1k_irda_hard_xmit,
|
|
.ndo_tx_timeout = au1k_tx_timeout,
|
|
.ndo_do_ioctl = au1k_irda_ioctl,
|
|
.ndo_change_mtu = eth_change_mtu,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
.ndo_set_mac_address = eth_mac_addr,
|
|
};
|
|
|
|
static int au1k_irda_net_init(struct net_device *dev)
|
|
{
|
|
struct au1k_private *aup = netdev_priv(dev);
|
|
int i, retval = 0, err;
|
|
db_dest_t *pDB, *pDBfree;
|
|
dma_addr_t temp;
|
|
|
|
err = au1k_irda_init_iobuf(&aup->rx_buff, 14384);
|
|
if (err)
|
|
goto out1;
|
|
|
|
dev->netdev_ops = &au1k_irda_netdev_ops;
|
|
|
|
irda_init_max_qos_capabilies(&aup->qos);
|
|
|
|
/* The only value we must override it the baudrate */
|
|
aup->qos.baud_rate.bits = IR_9600|IR_19200|IR_38400|IR_57600|
|
|
IR_115200|IR_576000 |(IR_4000000 << 8);
|
|
|
|
aup->qos.min_turn_time.bits = qos_mtt_bits;
|
|
irda_qos_bits_to_value(&aup->qos);
|
|
|
|
retval = -ENOMEM;
|
|
|
|
/* Tx ring follows rx ring + 512 bytes */
|
|
/* we need a 1k aligned buffer */
|
|
aup->rx_ring[0] = (ring_dest_t *)
|
|
dma_alloc(2*MAX_NUM_IR_DESC*(sizeof(ring_dest_t)), &temp);
|
|
if (!aup->rx_ring[0])
|
|
goto out2;
|
|
|
|
/* allocate the data buffers */
|
|
aup->db[0].vaddr =
|
|
(void *)dma_alloc(MAX_BUF_SIZE * 2*NUM_IR_DESC, &temp);
|
|
if (!aup->db[0].vaddr)
|
|
goto out3;
|
|
|
|
setup_hw_rings(aup, (u32)aup->rx_ring[0], (u32)aup->rx_ring[0] + 512);
|
|
|
|
pDBfree = NULL;
|
|
pDB = aup->db;
|
|
for (i=0; i<(2*NUM_IR_DESC); i++) {
|
|
pDB->pnext = pDBfree;
|
|
pDBfree = pDB;
|
|
pDB->vaddr =
|
|
(u32 *)((unsigned)aup->db[0].vaddr + MAX_BUF_SIZE*i);
|
|
pDB->dma_addr = (dma_addr_t)virt_to_bus(pDB->vaddr);
|
|
pDB++;
|
|
}
|
|
aup->pDBfree = pDBfree;
|
|
|
|
/* attach a data buffer to each descriptor */
|
|
for (i=0; i<NUM_IR_DESC; i++) {
|
|
pDB = GetFreeDB(aup);
|
|
if (!pDB) goto out;
|
|
aup->rx_ring[i]->addr_0 = (u8)(pDB->dma_addr & 0xff);
|
|
aup->rx_ring[i]->addr_1 = (u8)((pDB->dma_addr>>8) & 0xff);
|
|
aup->rx_ring[i]->addr_2 = (u8)((pDB->dma_addr>>16) & 0xff);
|
|
aup->rx_ring[i]->addr_3 = (u8)((pDB->dma_addr>>24) & 0xff);
|
|
aup->rx_db_inuse[i] = pDB;
|
|
}
|
|
for (i=0; i<NUM_IR_DESC; i++) {
|
|
pDB = GetFreeDB(aup);
|
|
if (!pDB) goto out;
|
|
aup->tx_ring[i]->addr_0 = (u8)(pDB->dma_addr & 0xff);
|
|
aup->tx_ring[i]->addr_1 = (u8)((pDB->dma_addr>>8) & 0xff);
|
|
aup->tx_ring[i]->addr_2 = (u8)((pDB->dma_addr>>16) & 0xff);
|
|
aup->tx_ring[i]->addr_3 = (u8)((pDB->dma_addr>>24) & 0xff);
|
|
aup->tx_ring[i]->count_0 = 0;
|
|
aup->tx_ring[i]->count_1 = 0;
|
|
aup->tx_ring[i]->flags = 0;
|
|
aup->tx_db_inuse[i] = pDB;
|
|
}
|
|
|
|
#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100)
|
|
/* power on */
|
|
bcsr->resets &= ~BCSR_RESETS_IRDA_MODE_MASK;
|
|
bcsr->resets |= BCSR_RESETS_IRDA_MODE_FULL;
|
|
au_sync();
|
|
#endif
|
|
|
|
return 0;
|
|
|
|
out3:
|
|
dma_free((void *)aup->rx_ring[0],
|
|
2 * MAX_NUM_IR_DESC*(sizeof(ring_dest_t)));
|
|
out2:
|
|
kfree(aup->rx_buff.head);
|
|
out1:
|
|
printk(KERN_ERR "au1k_init_module failed. Returns %d\n", retval);
|
|
return retval;
|
|
}
|
|
|
|
|
|
static int au1k_init(struct net_device *dev)
|
|
{
|
|
struct au1k_private *aup = netdev_priv(dev);
|
|
int i;
|
|
u32 control;
|
|
u32 ring_address;
|
|
|
|
/* bring the device out of reset */
|
|
control = 0xe; /* coherent, clock enable, one half system clock */
|
|
|
|
#ifndef CONFIG_CPU_LITTLE_ENDIAN
|
|
control |= 1;
|
|
#endif
|
|
aup->tx_head = 0;
|
|
aup->tx_tail = 0;
|
|
aup->rx_head = 0;
|
|
|
|
for (i=0; i<NUM_IR_DESC; i++) {
|
|
aup->rx_ring[i]->flags = AU_OWN;
|
|
}
|
|
|
|
writel(control, IR_INTERFACE_CONFIG);
|
|
au_sync_delay(10);
|
|
|
|
writel(read_ir_reg(IR_ENABLE) & ~0x8000, IR_ENABLE); /* disable PHY */
|
|
au_sync_delay(1);
|
|
|
|
writel(MAX_BUF_SIZE, IR_MAX_PKT_LEN);
|
|
|
|
ring_address = (u32)virt_to_phys((void *)aup->rx_ring[0]);
|
|
writel(ring_address >> 26, IR_RING_BASE_ADDR_H);
|
|
writel((ring_address >> 10) & 0xffff, IR_RING_BASE_ADDR_L);
|
|
|
|
writel(RING_SIZE_64<<8 | RING_SIZE_64<<12, IR_RING_SIZE);
|
|
|
|
writel(1<<2 | IR_ONE_PIN, IR_CONFIG_2); /* 48MHz */
|
|
writel(0, IR_RING_ADDR_CMPR);
|
|
|
|
au1k_irda_set_speed(dev, 9600);
|
|
return 0;
|
|
}
|
|
|
|
static int au1k_irda_start(struct net_device *dev)
|
|
{
|
|
int retval;
|
|
char hwname[32];
|
|
struct au1k_private *aup = netdev_priv(dev);
|
|
|
|
if ((retval = au1k_init(dev))) {
|
|
printk(KERN_ERR "%s: error in au1k_init\n", dev->name);
|
|
return retval;
|
|
}
|
|
|
|
if ((retval = request_irq(AU1000_IRDA_TX_INT, &au1k_irda_interrupt,
|
|
0, dev->name, dev))) {
|
|
printk(KERN_ERR "%s: unable to get IRQ %d\n",
|
|
dev->name, dev->irq);
|
|
return retval;
|
|
}
|
|
if ((retval = request_irq(AU1000_IRDA_RX_INT, &au1k_irda_interrupt,
|
|
0, dev->name, dev))) {
|
|
free_irq(AU1000_IRDA_TX_INT, dev);
|
|
printk(KERN_ERR "%s: unable to get IRQ %d\n",
|
|
dev->name, dev->irq);
|
|
return retval;
|
|
}
|
|
|
|
/* Give self a hardware name */
|
|
sprintf(hwname, "Au1000 SIR/FIR");
|
|
aup->irlap = irlap_open(dev, &aup->qos, hwname);
|
|
netif_start_queue(dev);
|
|
|
|
writel(read_ir_reg(IR_CONFIG_2) | 1<<8, IR_CONFIG_2); /* int enable */
|
|
|
|
aup->timer.expires = RUN_AT((3*HZ));
|
|
aup->timer.data = (unsigned long)dev;
|
|
return 0;
|
|
}
|
|
|
|
static int au1k_irda_stop(struct net_device *dev)
|
|
{
|
|
struct au1k_private *aup = netdev_priv(dev);
|
|
|
|
/* disable interrupts */
|
|
writel(read_ir_reg(IR_CONFIG_2) & ~(1<<8), IR_CONFIG_2);
|
|
writel(0, IR_CONFIG_1);
|
|
writel(0, IR_INTERFACE_CONFIG); /* disable clock */
|
|
au_sync();
|
|
|
|
if (aup->irlap) {
|
|
irlap_close(aup->irlap);
|
|
aup->irlap = NULL;
|
|
}
|
|
|
|
netif_stop_queue(dev);
|
|
del_timer(&aup->timer);
|
|
|
|
/* disable the interrupt */
|
|
free_irq(AU1000_IRDA_TX_INT, dev);
|
|
free_irq(AU1000_IRDA_RX_INT, dev);
|
|
return 0;
|
|
}
|
|
|
|
static void __exit au1k_irda_exit(void)
|
|
{
|
|
struct net_device *dev = ir_devs[0];
|
|
struct au1k_private *aup = netdev_priv(dev);
|
|
|
|
unregister_netdev(dev);
|
|
|
|
dma_free((void *)aup->db[0].vaddr,
|
|
MAX_BUF_SIZE * 2*NUM_IR_DESC);
|
|
dma_free((void *)aup->rx_ring[0],
|
|
2 * MAX_NUM_IR_DESC*(sizeof(ring_dest_t)));
|
|
kfree(aup->rx_buff.head);
|
|
free_netdev(dev);
|
|
}
|
|
|
|
|
|
static inline void
|
|
update_tx_stats(struct net_device *dev, u32 status, u32 pkt_len)
|
|
{
|
|
struct au1k_private *aup = netdev_priv(dev);
|
|
struct net_device_stats *ps = &aup->stats;
|
|
|
|
ps->tx_packets++;
|
|
ps->tx_bytes += pkt_len;
|
|
|
|
if (status & IR_TX_ERROR) {
|
|
ps->tx_errors++;
|
|
ps->tx_aborted_errors++;
|
|
}
|
|
}
|
|
|
|
|
|
static void au1k_tx_ack(struct net_device *dev)
|
|
{
|
|
struct au1k_private *aup = netdev_priv(dev);
|
|
volatile ring_dest_t *ptxd;
|
|
|
|
ptxd = aup->tx_ring[aup->tx_tail];
|
|
while (!(ptxd->flags & AU_OWN) && (aup->tx_tail != aup->tx_head)) {
|
|
update_tx_stats(dev, ptxd->flags,
|
|
ptxd->count_1<<8 | ptxd->count_0);
|
|
ptxd->count_0 = 0;
|
|
ptxd->count_1 = 0;
|
|
au_sync();
|
|
|
|
aup->tx_tail = (aup->tx_tail + 1) & (NUM_IR_DESC - 1);
|
|
ptxd = aup->tx_ring[aup->tx_tail];
|
|
|
|
if (aup->tx_full) {
|
|
aup->tx_full = 0;
|
|
netif_wake_queue(dev);
|
|
}
|
|
}
|
|
|
|
if (aup->tx_tail == aup->tx_head) {
|
|
if (aup->newspeed) {
|
|
au1k_irda_set_speed(dev, aup->newspeed);
|
|
aup->newspeed = 0;
|
|
}
|
|
else {
|
|
writel(read_ir_reg(IR_CONFIG_1) & ~IR_TX_ENABLE,
|
|
IR_CONFIG_1);
|
|
au_sync();
|
|
writel(read_ir_reg(IR_CONFIG_1) | IR_RX_ENABLE,
|
|
IR_CONFIG_1);
|
|
writel(0, IR_RING_PROMPT);
|
|
au_sync();
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/*
|
|
* Au1000 transmit routine.
|
|
*/
|
|
static int au1k_irda_hard_xmit(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
struct au1k_private *aup = netdev_priv(dev);
|
|
int speed = irda_get_next_speed(skb);
|
|
volatile ring_dest_t *ptxd;
|
|
u32 len;
|
|
|
|
u32 flags;
|
|
db_dest_t *pDB;
|
|
|
|
if (speed != aup->speed && speed != -1) {
|
|
aup->newspeed = speed;
|
|
}
|
|
|
|
if ((skb->len == 0) && (aup->newspeed)) {
|
|
if (aup->tx_tail == aup->tx_head) {
|
|
au1k_irda_set_speed(dev, speed);
|
|
aup->newspeed = 0;
|
|
}
|
|
dev_kfree_skb(skb);
|
|
return 0;
|
|
}
|
|
|
|
ptxd = aup->tx_ring[aup->tx_head];
|
|
flags = ptxd->flags;
|
|
|
|
if (flags & AU_OWN) {
|
|
printk(KERN_DEBUG "%s: tx_full\n", dev->name);
|
|
netif_stop_queue(dev);
|
|
aup->tx_full = 1;
|
|
return NETDEV_TX_BUSY;
|
|
}
|
|
else if (((aup->tx_head + 1) & (NUM_IR_DESC - 1)) == aup->tx_tail) {
|
|
printk(KERN_DEBUG "%s: tx_full\n", dev->name);
|
|
netif_stop_queue(dev);
|
|
aup->tx_full = 1;
|
|
return NETDEV_TX_BUSY;
|
|
}
|
|
|
|
pDB = aup->tx_db_inuse[aup->tx_head];
|
|
|
|
#if 0
|
|
if (read_ir_reg(IR_RX_BYTE_CNT) != 0) {
|
|
printk("tx warning: rx byte cnt %x\n",
|
|
read_ir_reg(IR_RX_BYTE_CNT));
|
|
}
|
|
#endif
|
|
|
|
if (aup->speed == 4000000) {
|
|
/* FIR */
|
|
skb_copy_from_linear_data(skb, pDB->vaddr, skb->len);
|
|
ptxd->count_0 = skb->len & 0xff;
|
|
ptxd->count_1 = (skb->len >> 8) & 0xff;
|
|
|
|
}
|
|
else {
|
|
/* SIR */
|
|
len = async_wrap_skb(skb, (u8 *)pDB->vaddr, MAX_BUF_SIZE);
|
|
ptxd->count_0 = len & 0xff;
|
|
ptxd->count_1 = (len >> 8) & 0xff;
|
|
ptxd->flags |= IR_DIS_CRC;
|
|
au_writel(au_readl(0xae00000c) & ~(1<<13), 0xae00000c);
|
|
}
|
|
ptxd->flags |= AU_OWN;
|
|
au_sync();
|
|
|
|
writel(read_ir_reg(IR_CONFIG_1) | IR_TX_ENABLE, IR_CONFIG_1);
|
|
writel(0, IR_RING_PROMPT);
|
|
au_sync();
|
|
|
|
dev_kfree_skb(skb);
|
|
aup->tx_head = (aup->tx_head + 1) & (NUM_IR_DESC - 1);
|
|
dev->trans_start = jiffies;
|
|
return 0;
|
|
}
|
|
|
|
|
|
static inline void
|
|
update_rx_stats(struct net_device *dev, u32 status, u32 count)
|
|
{
|
|
struct au1k_private *aup = netdev_priv(dev);
|
|
struct net_device_stats *ps = &aup->stats;
|
|
|
|
ps->rx_packets++;
|
|
|
|
if (status & IR_RX_ERROR) {
|
|
ps->rx_errors++;
|
|
if (status & (IR_PHY_ERROR|IR_FIFO_OVER))
|
|
ps->rx_missed_errors++;
|
|
if (status & IR_MAX_LEN)
|
|
ps->rx_length_errors++;
|
|
if (status & IR_CRC_ERROR)
|
|
ps->rx_crc_errors++;
|
|
}
|
|
else
|
|
ps->rx_bytes += count;
|
|
}
|
|
|
|
/*
|
|
* Au1000 receive routine.
|
|
*/
|
|
static int au1k_irda_rx(struct net_device *dev)
|
|
{
|
|
struct au1k_private *aup = netdev_priv(dev);
|
|
struct sk_buff *skb;
|
|
volatile ring_dest_t *prxd;
|
|
u32 flags, count;
|
|
db_dest_t *pDB;
|
|
|
|
prxd = aup->rx_ring[aup->rx_head];
|
|
flags = prxd->flags;
|
|
|
|
while (!(flags & AU_OWN)) {
|
|
pDB = aup->rx_db_inuse[aup->rx_head];
|
|
count = prxd->count_1<<8 | prxd->count_0;
|
|
if (!(flags & IR_RX_ERROR)) {
|
|
/* good frame */
|
|
update_rx_stats(dev, flags, count);
|
|
skb=alloc_skb(count+1,GFP_ATOMIC);
|
|
if (skb == NULL) {
|
|
aup->netdev->stats.rx_dropped++;
|
|
continue;
|
|
}
|
|
skb_reserve(skb, 1);
|
|
if (aup->speed == 4000000)
|
|
skb_put(skb, count);
|
|
else
|
|
skb_put(skb, count-2);
|
|
skb_copy_to_linear_data(skb, pDB->vaddr, count - 2);
|
|
skb->dev = dev;
|
|
skb_reset_mac_header(skb);
|
|
skb->protocol = htons(ETH_P_IRDA);
|
|
netif_rx(skb);
|
|
prxd->count_0 = 0;
|
|
prxd->count_1 = 0;
|
|
}
|
|
prxd->flags |= AU_OWN;
|
|
aup->rx_head = (aup->rx_head + 1) & (NUM_IR_DESC - 1);
|
|
writel(0, IR_RING_PROMPT);
|
|
au_sync();
|
|
|
|
/* next descriptor */
|
|
prxd = aup->rx_ring[aup->rx_head];
|
|
flags = prxd->flags;
|
|
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
|
|
static irqreturn_t au1k_irda_interrupt(int dummy, void *dev_id)
|
|
{
|
|
struct net_device *dev = dev_id;
|
|
|
|
writel(0, IR_INT_CLEAR); /* ack irda interrupts */
|
|
|
|
au1k_irda_rx(dev);
|
|
au1k_tx_ack(dev);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
|
|
/*
|
|
* The Tx ring has been full longer than the watchdog timeout
|
|
* value. The transmitter must be hung?
|
|
*/
|
|
static void au1k_tx_timeout(struct net_device *dev)
|
|
{
|
|
u32 speed;
|
|
struct au1k_private *aup = netdev_priv(dev);
|
|
|
|
printk(KERN_ERR "%s: tx timeout\n", dev->name);
|
|
speed = aup->speed;
|
|
aup->speed = 0;
|
|
au1k_irda_set_speed(dev, speed);
|
|
aup->tx_full = 0;
|
|
netif_wake_queue(dev);
|
|
}
|
|
|
|
|
|
/*
|
|
* Set the IrDA communications speed.
|
|
*/
|
|
static int
|
|
au1k_irda_set_speed(struct net_device *dev, int speed)
|
|
{
|
|
unsigned long flags;
|
|
struct au1k_private *aup = netdev_priv(dev);
|
|
u32 control;
|
|
int ret = 0, timeout = 10, i;
|
|
volatile ring_dest_t *ptxd;
|
|
#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100)
|
|
unsigned long irda_resets;
|
|
#endif
|
|
|
|
if (speed == aup->speed)
|
|
return ret;
|
|
|
|
spin_lock_irqsave(&ir_lock, flags);
|
|
|
|
/* disable PHY first */
|
|
writel(read_ir_reg(IR_ENABLE) & ~0x8000, IR_ENABLE);
|
|
|
|
/* disable RX/TX */
|
|
writel(read_ir_reg(IR_CONFIG_1) & ~(IR_RX_ENABLE|IR_TX_ENABLE),
|
|
IR_CONFIG_1);
|
|
au_sync_delay(1);
|
|
while (read_ir_reg(IR_ENABLE) & (IR_RX_STATUS | IR_TX_STATUS)) {
|
|
mdelay(1);
|
|
if (!timeout--) {
|
|
printk(KERN_ERR "%s: rx/tx disable timeout\n",
|
|
dev->name);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* disable DMA */
|
|
writel(read_ir_reg(IR_CONFIG_1) & ~IR_DMA_ENABLE, IR_CONFIG_1);
|
|
au_sync_delay(1);
|
|
|
|
/*
|
|
* After we disable tx/rx. the index pointers
|
|
* go back to zero.
|
|
*/
|
|
aup->tx_head = aup->tx_tail = aup->rx_head = 0;
|
|
for (i=0; i<NUM_IR_DESC; i++) {
|
|
ptxd = aup->tx_ring[i];
|
|
ptxd->flags = 0;
|
|
ptxd->count_0 = 0;
|
|
ptxd->count_1 = 0;
|
|
}
|
|
|
|
for (i=0; i<NUM_IR_DESC; i++) {
|
|
ptxd = aup->rx_ring[i];
|
|
ptxd->count_0 = 0;
|
|
ptxd->count_1 = 0;
|
|
ptxd->flags = AU_OWN;
|
|
}
|
|
|
|
if (speed == 4000000) {
|
|
#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100)
|
|
bcsr->resets |= BCSR_RESETS_FIR_SEL;
|
|
#else /* Pb1000 and Pb1100 */
|
|
writel(1<<13, CPLD_AUX1);
|
|
#endif
|
|
}
|
|
else {
|
|
#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100)
|
|
bcsr->resets &= ~BCSR_RESETS_FIR_SEL;
|
|
#else /* Pb1000 and Pb1100 */
|
|
writel(readl(CPLD_AUX1) & ~(1<<13), CPLD_AUX1);
|
|
#endif
|
|
}
|
|
|
|
switch (speed) {
|
|
case 9600:
|
|
writel(11<<10 | 12<<5, IR_WRITE_PHY_CONFIG);
|
|
writel(IR_SIR_MODE, IR_CONFIG_1);
|
|
break;
|
|
case 19200:
|
|
writel(5<<10 | 12<<5, IR_WRITE_PHY_CONFIG);
|
|
writel(IR_SIR_MODE, IR_CONFIG_1);
|
|
break;
|
|
case 38400:
|
|
writel(2<<10 | 12<<5, IR_WRITE_PHY_CONFIG);
|
|
writel(IR_SIR_MODE, IR_CONFIG_1);
|
|
break;
|
|
case 57600:
|
|
writel(1<<10 | 12<<5, IR_WRITE_PHY_CONFIG);
|
|
writel(IR_SIR_MODE, IR_CONFIG_1);
|
|
break;
|
|
case 115200:
|
|
writel(12<<5, IR_WRITE_PHY_CONFIG);
|
|
writel(IR_SIR_MODE, IR_CONFIG_1);
|
|
break;
|
|
case 4000000:
|
|
writel(0xF, IR_WRITE_PHY_CONFIG);
|
|
writel(IR_FIR|IR_DMA_ENABLE|IR_RX_ENABLE, IR_CONFIG_1);
|
|
break;
|
|
default:
|
|
printk(KERN_ERR "%s unsupported speed %x\n", dev->name, speed);
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
aup->speed = speed;
|
|
writel(read_ir_reg(IR_ENABLE) | 0x8000, IR_ENABLE);
|
|
au_sync();
|
|
|
|
control = read_ir_reg(IR_ENABLE);
|
|
writel(0, IR_RING_PROMPT);
|
|
au_sync();
|
|
|
|
if (control & (1<<14)) {
|
|
printk(KERN_ERR "%s: configuration error\n", dev->name);
|
|
}
|
|
else {
|
|
if (control & (1<<11))
|
|
printk(KERN_DEBUG "%s Valid SIR config\n", dev->name);
|
|
if (control & (1<<12))
|
|
printk(KERN_DEBUG "%s Valid MIR config\n", dev->name);
|
|
if (control & (1<<13))
|
|
printk(KERN_DEBUG "%s Valid FIR config\n", dev->name);
|
|
if (control & (1<<10))
|
|
printk(KERN_DEBUG "%s TX enabled\n", dev->name);
|
|
if (control & (1<<9))
|
|
printk(KERN_DEBUG "%s RX enabled\n", dev->name);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&ir_lock, flags);
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
au1k_irda_ioctl(struct net_device *dev, struct ifreq *ifreq, int cmd)
|
|
{
|
|
struct if_irda_req *rq = (struct if_irda_req *)ifreq;
|
|
struct au1k_private *aup = netdev_priv(dev);
|
|
int ret = -EOPNOTSUPP;
|
|
|
|
switch (cmd) {
|
|
case SIOCSBANDWIDTH:
|
|
if (capable(CAP_NET_ADMIN)) {
|
|
/*
|
|
* We are unable to set the speed if the
|
|
* device is not running.
|
|
*/
|
|
if (aup->open)
|
|
ret = au1k_irda_set_speed(dev,
|
|
rq->ifr_baudrate);
|
|
else {
|
|
printk(KERN_ERR "%s ioctl: !netif_running\n",
|
|
dev->name);
|
|
ret = 0;
|
|
}
|
|
}
|
|
break;
|
|
|
|
case SIOCSMEDIABUSY:
|
|
ret = -EPERM;
|
|
if (capable(CAP_NET_ADMIN)) {
|
|
irda_device_set_media_busy(dev, TRUE);
|
|
ret = 0;
|
|
}
|
|
break;
|
|
|
|
case SIOCGRECEIVING:
|
|
rq->ifr_receiving = 0;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
MODULE_AUTHOR("Pete Popov <ppopov@mvista.com>");
|
|
MODULE_DESCRIPTION("Au1000 IrDA Device Driver");
|
|
|
|
module_init(au1k_irda_init);
|
|
module_exit(au1k_irda_exit);
|