1
linux/drivers/acpi/resources/rsmemory.c
Robert Moore bda663d36b [ACPI] ACPICA 20050916
Fixed a problem within the Resource Manager where
support for the Generic Register descriptor was not fully
implemented.  This descriptor is now fully recognized,
parsed, disassembled, and displayed.

Restructured the Resource Manager code to utilize
table-driven dispatch and lookup, eliminating many of the
large switch() statements.  This reduces overall subsystem
code size and code complexity.  Affects the resource parsing
and construction, disassembly, and debug dump output.

Cleaned up and restructured the debug dump output for all
resource descriptors.  Improved readability of the output
and reduced code size.

Fixed a problem where changes to internal data structures
caused the optional ACPI_MUTEX_DEBUG code to fail
compilation if specified.

Signed-off-by: Robert Moore <Robert.Moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2005-09-21 23:51:39 -04:00

495 lines
15 KiB
C

/*******************************************************************************
*
* Module Name: rsmem24 - Memory resource descriptors
*
******************************************************************************/
/*
* Copyright (C) 2000 - 2005, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <acpi/acpi.h>
#include <acpi/acresrc.h>
#define _COMPONENT ACPI_RESOURCES
ACPI_MODULE_NAME("rsmemory")
/*******************************************************************************
*
* FUNCTION: acpi_rs_memory24_resource
*
* PARAMETERS: byte_stream_buffer - Pointer to the resource input byte
* stream
* bytes_consumed - Pointer to where the number of bytes
* consumed the byte_stream_buffer is
* returned
* output_buffer - Pointer to the return data buffer
* structure_size - Pointer to where the number of bytes
* in the return data struct is returned
*
* RETURN: Status
*
* DESCRIPTION: Take the resource byte stream and fill out the appropriate
* structure pointed to by the output_buffer. Return the
* number of bytes consumed from the byte stream.
*
******************************************************************************/
acpi_status
acpi_rs_memory24_resource(u8 * byte_stream_buffer,
acpi_size * bytes_consumed,
u8 ** output_buffer, acpi_size * structure_size)
{
u8 *buffer = byte_stream_buffer;
struct acpi_resource *output_struct = (void *)*output_buffer;
u16 temp16 = 0;
u8 temp8 = 0;
acpi_size struct_size =
ACPI_SIZEOF_RESOURCE(struct acpi_resource_mem24);
ACPI_FUNCTION_TRACE("rs_memory24_resource");
/* Point past the Descriptor to get the number of bytes consumed */
buffer += 1;
ACPI_MOVE_16_TO_16(&temp16, buffer);
buffer += 2;
*bytes_consumed = (acpi_size) temp16 + 3;
output_struct->type = ACPI_RSTYPE_MEM24;
/* Check Byte 3 the Read/Write bit */
temp8 = *buffer;
buffer += 1;
output_struct->data.memory24.read_write_attribute = temp8 & 0x01;
/* Get min_base_address (Bytes 4-5) */
ACPI_MOVE_16_TO_16(&temp16, buffer);
buffer += 2;
output_struct->data.memory24.min_base_address = temp16;
/* Get max_base_address (Bytes 6-7) */
ACPI_MOVE_16_TO_16(&temp16, buffer);
buffer += 2;
output_struct->data.memory24.max_base_address = temp16;
/* Get Alignment (Bytes 8-9) */
ACPI_MOVE_16_TO_16(&temp16, buffer);
buffer += 2;
output_struct->data.memory24.alignment = temp16;
/* Get range_length (Bytes 10-11) */
ACPI_MOVE_16_TO_16(&temp16, buffer);
output_struct->data.memory24.range_length = temp16;
/* Set the Length parameter */
output_struct->length = (u32) struct_size;
/* Return the final size of the structure */
*structure_size = struct_size;
return_ACPI_STATUS(AE_OK);
}
/*******************************************************************************
*
* FUNCTION: acpi_rs_memory24_stream
*
* PARAMETERS: Resource - Pointer to the resource linked list
* output_buffer - Pointer to the user's return buffer
* bytes_consumed - Pointer to where the number of bytes
* used in the output_buffer is returned
*
* RETURN: Status
*
* DESCRIPTION: Take the linked list resource structure and fills in the
* the appropriate bytes in a byte stream
*
******************************************************************************/
acpi_status
acpi_rs_memory24_stream(struct acpi_resource *resource,
u8 ** output_buffer, acpi_size * bytes_consumed)
{
u8 *buffer = *output_buffer;
u16 temp16 = 0;
u8 temp8 = 0;
ACPI_FUNCTION_TRACE("rs_memory24_stream");
/* The Descriptor Type field is static */
*buffer = ACPI_RDESC_TYPE_MEMORY_24;
buffer += 1;
/* The length field is static */
temp16 = 0x09;
ACPI_MOVE_16_TO_16(buffer, &temp16);
buffer += 2;
/* Set the Information Byte */
temp8 = (u8) (resource->data.memory24.read_write_attribute & 0x01);
*buffer = temp8;
buffer += 1;
/* Set the Range minimum base address */
ACPI_MOVE_32_TO_16(buffer, &resource->data.memory24.min_base_address);
buffer += 2;
/* Set the Range maximum base address */
ACPI_MOVE_32_TO_16(buffer, &resource->data.memory24.max_base_address);
buffer += 2;
/* Set the base alignment */
ACPI_MOVE_32_TO_16(buffer, &resource->data.memory24.alignment);
buffer += 2;
/* Set the range length */
ACPI_MOVE_32_TO_16(buffer, &resource->data.memory24.range_length);
buffer += 2;
/* Return the number of bytes consumed in this operation */
*bytes_consumed = ACPI_PTR_DIFF(buffer, *output_buffer);
return_ACPI_STATUS(AE_OK);
}
/*******************************************************************************
*
* FUNCTION: acpi_rs_memory32_range_resource
*
* PARAMETERS: byte_stream_buffer - Pointer to the resource input byte
* stream
* bytes_consumed - Pointer to where the number of bytes
* consumed the byte_stream_buffer is
* returned
* output_buffer - Pointer to the return data buffer
* structure_size - Pointer to where the number of bytes
* in the return data struct is returned
*
* RETURN: Status
*
* DESCRIPTION: Take the resource byte stream and fill out the appropriate
* structure pointed to by the output_buffer. Return the
* number of bytes consumed from the byte stream.
*
******************************************************************************/
acpi_status
acpi_rs_memory32_range_resource(u8 * byte_stream_buffer,
acpi_size * bytes_consumed,
u8 ** output_buffer, acpi_size * structure_size)
{
u8 *buffer = byte_stream_buffer;
struct acpi_resource *output_struct = (void *)*output_buffer;
u16 temp16 = 0;
u8 temp8 = 0;
acpi_size struct_size =
ACPI_SIZEOF_RESOURCE(struct acpi_resource_mem32);
ACPI_FUNCTION_TRACE("rs_memory32_range_resource");
/* Point past the Descriptor to get the number of bytes consumed */
buffer += 1;
ACPI_MOVE_16_TO_16(&temp16, buffer);
buffer += 2;
*bytes_consumed = (acpi_size) temp16 + 3;
output_struct->type = ACPI_RSTYPE_MEM32;
/*
* Point to the place in the output buffer where the data portion will
* begin.
* 1. Set the RESOURCE_DATA * Data to point to its own address, then
* 2. Set the pointer to the next address.
*
* NOTE: output_struct->Data is cast to u8, otherwise, this addition adds
* 4 * sizeof(RESOURCE_DATA) instead of 4 * sizeof(u8)
*/
/* Check Byte 3 the Read/Write bit */
temp8 = *buffer;
buffer += 1;
output_struct->data.memory32.read_write_attribute = temp8 & 0x01;
/* Get min_base_address (Bytes 4-7) */
ACPI_MOVE_32_TO_32(&output_struct->data.memory32.min_base_address,
buffer);
buffer += 4;
/* Get max_base_address (Bytes 8-11) */
ACPI_MOVE_32_TO_32(&output_struct->data.memory32.max_base_address,
buffer);
buffer += 4;
/* Get Alignment (Bytes 12-15) */
ACPI_MOVE_32_TO_32(&output_struct->data.memory32.alignment, buffer);
buffer += 4;
/* Get range_length (Bytes 16-19) */
ACPI_MOVE_32_TO_32(&output_struct->data.memory32.range_length, buffer);
/* Set the Length parameter */
output_struct->length = (u32) struct_size;
/* Return the final size of the structure */
*structure_size = struct_size;
return_ACPI_STATUS(AE_OK);
}
/*******************************************************************************
*
* FUNCTION: acpi_rs_fixed_memory32_resource
*
* PARAMETERS: byte_stream_buffer - Pointer to the resource input byte
* stream
* bytes_consumed - Pointer to where the number of bytes
* consumed the byte_stream_buffer is
* returned
* output_buffer - Pointer to the return data buffer
* structure_size - Pointer to where the number of bytes
* in the return data struct is returned
*
* RETURN: Status
*
* DESCRIPTION: Take the resource byte stream and fill out the appropriate
* structure pointed to by the output_buffer. Return the
* number of bytes consumed from the byte stream.
*
******************************************************************************/
acpi_status
acpi_rs_fixed_memory32_resource(u8 * byte_stream_buffer,
acpi_size * bytes_consumed,
u8 ** output_buffer, acpi_size * structure_size)
{
u8 *buffer = byte_stream_buffer;
struct acpi_resource *output_struct = (void *)*output_buffer;
u16 temp16 = 0;
u8 temp8 = 0;
acpi_size struct_size =
ACPI_SIZEOF_RESOURCE(struct acpi_resource_fixed_mem32);
ACPI_FUNCTION_TRACE("rs_fixed_memory32_resource");
/* Point past the Descriptor to get the number of bytes consumed */
buffer += 1;
ACPI_MOVE_16_TO_16(&temp16, buffer);
buffer += 2;
*bytes_consumed = (acpi_size) temp16 + 3;
output_struct->type = ACPI_RSTYPE_FIXED_MEM32;
/* Check Byte 3 the Read/Write bit */
temp8 = *buffer;
buffer += 1;
output_struct->data.fixed_memory32.read_write_attribute = temp8 & 0x01;
/* Get range_base_address (Bytes 4-7) */
ACPI_MOVE_32_TO_32(&output_struct->data.fixed_memory32.
range_base_address, buffer);
buffer += 4;
/* Get range_length (Bytes 8-11) */
ACPI_MOVE_32_TO_32(&output_struct->data.fixed_memory32.range_length,
buffer);
/* Set the Length parameter */
output_struct->length = (u32) struct_size;
/* Return the final size of the structure */
*structure_size = struct_size;
return_ACPI_STATUS(AE_OK);
}
/*******************************************************************************
*
* FUNCTION: acpi_rs_memory32_range_stream
*
* PARAMETERS: Resource - Pointer to the resource linked list
* output_buffer - Pointer to the user's return buffer
* bytes_consumed - Pointer to where the number of bytes
* used in the output_buffer is returned
*
* RETURN: Status
*
* DESCRIPTION: Take the linked list resource structure and fills in the
* the appropriate bytes in a byte stream
*
******************************************************************************/
acpi_status
acpi_rs_memory32_range_stream(struct acpi_resource *resource,
u8 ** output_buffer, acpi_size * bytes_consumed)
{
u8 *buffer = *output_buffer;
u16 temp16 = 0;
u8 temp8 = 0;
ACPI_FUNCTION_TRACE("rs_memory32_range_stream");
/* The Descriptor Type field is static */
*buffer = ACPI_RDESC_TYPE_MEMORY_32;
buffer += 1;
/* The length field is static */
temp16 = 0x11;
ACPI_MOVE_16_TO_16(buffer, &temp16);
buffer += 2;
/* Set the Information Byte */
temp8 = (u8) (resource->data.memory32.read_write_attribute & 0x01);
*buffer = temp8;
buffer += 1;
/* Set the Range minimum base address */
ACPI_MOVE_32_TO_32(buffer, &resource->data.memory32.min_base_address);
buffer += 4;
/* Set the Range maximum base address */
ACPI_MOVE_32_TO_32(buffer, &resource->data.memory32.max_base_address);
buffer += 4;
/* Set the base alignment */
ACPI_MOVE_32_TO_32(buffer, &resource->data.memory32.alignment);
buffer += 4;
/* Set the range length */
ACPI_MOVE_32_TO_32(buffer, &resource->data.memory32.range_length);
buffer += 4;
/* Return the number of bytes consumed in this operation */
*bytes_consumed = ACPI_PTR_DIFF(buffer, *output_buffer);
return_ACPI_STATUS(AE_OK);
}
/*******************************************************************************
*
* FUNCTION: acpi_rs_fixed_memory32_stream
*
* PARAMETERS: Resource - Pointer to the resource linked list
* output_buffer - Pointer to the user's return buffer
* bytes_consumed - Pointer to where the number of bytes
* used in the output_buffer is returned
*
* RETURN: Status
*
* DESCRIPTION: Take the linked list resource structure and fills in the
* the appropriate bytes in a byte stream
*
******************************************************************************/
acpi_status
acpi_rs_fixed_memory32_stream(struct acpi_resource *resource,
u8 ** output_buffer, acpi_size * bytes_consumed)
{
u8 *buffer = *output_buffer;
u16 temp16 = 0;
u8 temp8 = 0;
ACPI_FUNCTION_TRACE("rs_fixed_memory32_stream");
/* The Descriptor Type field is static */
*buffer = ACPI_RDESC_TYPE_FIXED_MEMORY_32;
buffer += 1;
/* The length field is static */
temp16 = 0x09;
ACPI_MOVE_16_TO_16(buffer, &temp16);
buffer += 2;
/* Set the Information Byte */
temp8 =
(u8) (resource->data.fixed_memory32.read_write_attribute & 0x01);
*buffer = temp8;
buffer += 1;
/* Set the Range base address */
ACPI_MOVE_32_TO_32(buffer,
&resource->data.fixed_memory32.range_base_address);
buffer += 4;
/* Set the range length */
ACPI_MOVE_32_TO_32(buffer, &resource->data.fixed_memory32.range_length);
buffer += 4;
/* Return the number of bytes consumed in this operation */
*bytes_consumed = ACPI_PTR_DIFF(buffer, *output_buffer);
return_ACPI_STATUS(AE_OK);
}