kevin/linux
1
Fork 0
Code
bd5ce43323
linux/arch/arm/mach-pxa/include/mach
History
Eric Miao bd5ce43323 [ARM] pxa: introduce plat-pxa for PXA common code and add DMA support 
1. introduce folder of 'arch/arm/plat-pxa' for common code across different
   PXA processor families

2. initially moved DMA code into plat-pxa

3. common code in <mach/dma.h> moved into <plat/dma.h>, new processors
   should implement its own <mach/dma.h>, provide the following required
   definitions and '#include <plat/dma.h>' in the end:

   - DMAC_REGS_VIRT for mapped virtual address of the DMA registers'
     physical I/O memory

Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23 10:11:31 +08:00
..
audio.h
bitfield.h
camera.h
clkdev.h
colibri.h [ARM] pxa: Add Colibri LCD functions 2009-03-23 09:59:55 +08:00
corgi.h
csb726.h [ARM] pxa: add initial support for Cogent CSB726 board 2009-03-13 17:10:44 +08:00
debug-macro.S
dma.h [ARM] pxa: introduce plat-pxa for PXA common code and add DMA support 2009-03-23 10:11:31 +08:00
entry-macro.S
eseries-gpio.h [ARM] pxa: Add multi-io support for e-series 2008-12-15 03:29:34 +00:00
eseries-irq.h
gpio.h [ARM] pxa: fix typo in BANK_OFF() macro in gpio.h 2009-03-13 10:50:17 +08:00
gumstix.h [ARM] 5354/1: mach-pxa: add AM300 platform driver v3 2009-02-10 11:28:00 +00:00
h5000.h [ARM] pxa: add basic support for HP iPAQ h5000 2008-12-02 14:43:50 +08:00
hardware.h Merge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel 2008-12-29 18:08:11 +00:00
i2c.h
idp.h
io.h
irda.h
irqs.h
littleton.h [ARM] pxa/littleton: add preliminary I2C board info (da9034 + max7320) 2008-12-17 22:52:12 +08:00
lpd270.h
lubbock.h [ARM] pxa: make lubbock specific debugging stuffs back into lubbock.c 2009-03-09 21:22:40 +08:00
magician.h [ARM] pxa/magician: Enable pxa27x_udc and gpio_vbus 2009-02-02 16:48:43 +08:00
mainstone.h
memory.h
mfp-pxa2xx.h
mfp-pxa3xx.h
mfp-pxa25x.h [ARM] pxa: add support for additional GPIOs on PXA26x 2008-12-02 14:42:37 +08:00
mfp-pxa27x.h [ARM] pxa: add missing GPIOs definitions 2008-12-02 14:42:41 +08:00
mfp-pxa300.h [ARM] pxa: add missing pin function for CS2 on GPIO1 2009-03-19 16:20:39 +08:00
mfp-pxa320.h [ARM] pxa: add pxa320 missing pin function for CS2 on GPIO3 2009-03-23 09:53:33 +08:00
mfp-pxa930.h [ARM] pxa/tavorevb: update board support (smartpanel LCD + keypad) 2008-12-29 17:57:23 +08:00
mfp.h
mioa701.h [ARM] pxa/MioA701: discovered new gpio definitions. 2008-12-02 14:43:48 +08:00
mmc.h
mtd-xip.h [ARM] pxa: separate definitions from pxa-regs.h and remove it finally 2009-03-09 21:22:40 +08:00
ohci.h
palmasoc.h
palmld.h [ARM] pxa: PalmLD initial support 2009-01-21 15:06:34 +08:00
palmt5.h [ARM] pxa: PalmT5 initial support 2009-01-21 15:06:34 +08:00
palmtx.h
palmz72.h
pcm027.h
pcm990_baseboard.h
pm.h [ARM] pxa: make lubbock specific debugging stuffs back into lubbock.c 2009-03-09 21:22:40 +08:00
poodle.h
pxa2xx_spi.h
pxa2xx-gpio.h [ARM] pxa: move GPIO register definitions into <mach/gpio.h> 2009-03-09 21:22:37 +08:00
pxa2xx-regs.h [ARM] pxa: separate definitions from pxa-regs.h and remove it finally 2009-03-09 21:22:40 +08:00
pxa3xx_nand.h
pxa3xx-regs.h [ARM] pxa: move pxa2xx chip selects definitions out of pxa-regs.h 2009-03-09 21:22:40 +08:00
pxa25x-udc.h
pxa25x.h [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
pxa27x_keypad.h
pxa27x-udc.h
pxa27x.h [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
pxa300.h [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
pxa320.h [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
pxa930_rotary.h Input: add support for enhanced rotary controller on pxa930 and pxa935 2008-12-29 04:59:16 -08:00
pxa930_trkball.h Input: add support for trackball on pxa930 and pxa935 2008-12-29 04:58:58 -08:00
pxa930.h [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
pxafb.h [ARM] pxafb: allow video memory size to be configurable 2008-12-29 17:59:16 +08:00
regs-ac97.h [ARM] pxa: fix missing of __REG() definition for ac97 registers access 2009-01-19 11:39:36 +08:00
regs-intc.h [ARM] pxa: separate definitions from pxa-regs.h and remove it finally 2009-03-09 21:22:40 +08:00
regs-lcd.h [ARM] pxafb: add support for overlay1 and overlay2 as framebuffer devices 2008-12-29 18:00:04 +08:00
regs-ost.h [ARM] pxa: separate definitions from pxa-regs.h and remove it finally 2009-03-09 21:22:40 +08:00
regs-rtc.h [ARM] pxa: separate definitions from pxa-regs.h and remove it finally 2009-03-09 21:22:40 +08:00
regs-ssp.h [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
regs-uart.h [ARM] pxa: move UART register definitions into dedicated regs-uart.h 2008-12-02 14:42:38 +08:00
reset.h [ARM] fix kernel-doc syntax 2008-12-14 12:02:39 +00:00
sharpsl.h
spitz.h
ssp.h
system.h [ARM] pxa: separate definitions from pxa-regs.h and remove it finally 2009-03-09 21:22:40 +08:00
timex.h [ARM] rtc-sa1100: don't assume CLOCK_TICK_RATE to be a constant 2008-12-29 17:57:48 +08:00
tosa_bt.h
tosa.h
trizeps4.h
udc.h
uncompress.h [ARM] pxa: add initial support for Cogent CSB726 board 2009-03-13 17:10:44 +08:00
viper.h
vmalloc.h
zylonite.h