kevin/linux
1
Fork 0
Code
ba93c6297b
linux/drivers/scsi/sata_nv.c
Tejun Heo 49430f97dd [PATCH] libata: kill sht->max_sectors 
The previous dev->max_sectors patch made sht->max_sectors meaningless.
Kill all initializations of sht->max_sectors.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-12 14:36:30 -05:00

621 lines
17 KiB
C
Raw Blame History

/*
* sata_nv.c - NVIDIA nForce SATA
*
* Copyright 2004 NVIDIA Corp. All rights reserved.
* Copyright 2004 Andrew Chew
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING. If not, write to
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
*
*
* libata documentation is available via 'make {ps|pdf}docs',
* as Documentation/DocBook/libata.*
*
* No hardware documentation available outside of NVIDIA.
* This driver programs the NVIDIA SATA controller in a similar
* fashion as with other PCI IDE BMDMA controllers, with a few
* NV-specific details such as register offsets, SATA phy location,
* hotplug info, etc.
*
* 0.10
* - Fixed spurious interrupts issue seen with the Maxtor 6H500F0 500GB
* drive. Also made the check_hotplug() callbacks return whether there
* was a hotplug interrupt or not. This was not the source of the
* spurious interrupts, but is the right thing to do anyway.
*
* 0.09
* - Fixed bug introduced by 0.08's MCP51 and MCP55 support.
*
* 0.08
* - Added support for MCP51 and MCP55.
*
* 0.07
* - Added support for RAID class code.
*
* 0.06
* - Added generic SATA support by using a pci_device_id that filters on
* the IDE storage class code.
*
* 0.03
* - Fixed a bug where the hotplug handlers for non-CK804/MCP04 were using
* mmio_base, which is only set for the CK804/MCP04 case.
*
* 0.02
* - Added support for CK804 SATA controller.
*
* 0.01
* - Initial revision.
*/
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/device.h>
#include <scsi/scsi_host.h>
#include <linux/libata.h>
#define DRV_NAME "sata_nv"
#define DRV_VERSION "0.8"
#define NV_PORTS 2
#define NV_PIO_MASK 0x1f
#define NV_MWDMA_MASK 0x07
#define NV_UDMA_MASK 0x7f
#define NV_PORT0_SCR_REG_OFFSET 0x00
#define NV_PORT1_SCR_REG_OFFSET 0x40
#define NV_INT_STATUS 0x10
#define NV_INT_STATUS_CK804 0x440
#define NV_INT_STATUS_PDEV_INT 0x01
#define NV_INT_STATUS_PDEV_PM 0x02
#define NV_INT_STATUS_PDEV_ADDED 0x04
#define NV_INT_STATUS_PDEV_REMOVED 0x08
#define NV_INT_STATUS_SDEV_INT 0x10
#define NV_INT_STATUS_SDEV_PM 0x20
#define NV_INT_STATUS_SDEV_ADDED 0x40
#define NV_INT_STATUS_SDEV_REMOVED 0x80
#define NV_INT_STATUS_PDEV_HOTPLUG (NV_INT_STATUS_PDEV_ADDED | \
NV_INT_STATUS_PDEV_REMOVED)
#define NV_INT_STATUS_SDEV_HOTPLUG (NV_INT_STATUS_SDEV_ADDED | \
NV_INT_STATUS_SDEV_REMOVED)
#define NV_INT_STATUS_HOTPLUG (NV_INT_STATUS_PDEV_HOTPLUG | \
NV_INT_STATUS_SDEV_HOTPLUG)
#define NV_INT_ENABLE 0x11
#define NV_INT_ENABLE_CK804 0x441
#define NV_INT_ENABLE_PDEV_MASK 0x01
#define NV_INT_ENABLE_PDEV_PM 0x02
#define NV_INT_ENABLE_PDEV_ADDED 0x04
#define NV_INT_ENABLE_PDEV_REMOVED 0x08
#define NV_INT_ENABLE_SDEV_MASK 0x10
#define NV_INT_ENABLE_SDEV_PM 0x20
#define NV_INT_ENABLE_SDEV_ADDED 0x40
#define NV_INT_ENABLE_SDEV_REMOVED 0x80
#define NV_INT_ENABLE_PDEV_HOTPLUG (NV_INT_ENABLE_PDEV_ADDED | \
NV_INT_ENABLE_PDEV_REMOVED)
#define NV_INT_ENABLE_SDEV_HOTPLUG (NV_INT_ENABLE_SDEV_ADDED | \
NV_INT_ENABLE_SDEV_REMOVED)
#define NV_INT_ENABLE_HOTPLUG (NV_INT_ENABLE_PDEV_HOTPLUG | \
NV_INT_ENABLE_SDEV_HOTPLUG)
#define NV_INT_CONFIG 0x12
#define NV_INT_CONFIG_METHD 0x01 // 0 = INT, 1 = SMI
// For PCI config register 20
#define NV_MCP_SATA_CFG_20 0x50
#define NV_MCP_SATA_CFG_20_SATA_SPACE_EN 0x04
static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
static irqreturn_t nv_interrupt (int irq, void *dev_instance,
struct pt_regs *regs);
static u32 nv_scr_read (struct ata_port *ap, unsigned int sc_reg);
static void nv_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
static void nv_host_stop (struct ata_host_set *host_set);
static void nv_enable_hotplug(struct ata_probe_ent *probe_ent);
static void nv_disable_hotplug(struct ata_host_set *host_set);
static int nv_check_hotplug(struct ata_host_set *host_set);
static void nv_enable_hotplug_ck804(struct ata_probe_ent *probe_ent);
static void nv_disable_hotplug_ck804(struct ata_host_set *host_set);
static int nv_check_hotplug_ck804(struct ata_host_set *host_set);
enum nv_host_type
{
GENERIC,
NFORCE2,
NFORCE3,
CK804
};
static const struct pci_device_id nv_pci_tbl[] = {
{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, NFORCE2 },
{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, NFORCE3 },
{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, NFORCE3 },
{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, CK804 },
{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA2,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, CK804 },
{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, CK804 },
{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, CK804 },
{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC },
{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC },
{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC },
{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC },
{ PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_STORAGE_IDE<<8, 0xffff00, GENERIC },
{ PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_STORAGE_RAID<<8, 0xffff00, GENERIC },
{ 0, } /* terminate list */
};
#define NV_HOST_FLAGS_SCR_MMIO 0x00000001
struct nv_host_desc
{
enum nv_host_type host_type;
void (*enable_hotplug)(struct ata_probe_ent *probe_ent);
void (*disable_hotplug)(struct ata_host_set *host_set);
int (*check_hotplug)(struct ata_host_set *host_set);
};
static struct nv_host_desc nv_device_tbl[] = {
{
.host_type = GENERIC,
.enable_hotplug = NULL,
.disable_hotplug= NULL,
.check_hotplug = NULL,
},
{
.host_type = NFORCE2,
.enable_hotplug = nv_enable_hotplug,
.disable_hotplug= nv_disable_hotplug,
.check_hotplug = nv_check_hotplug,
},
{
.host_type = NFORCE3,
.enable_hotplug = nv_enable_hotplug,
.disable_hotplug= nv_disable_hotplug,
.check_hotplug = nv_check_hotplug,
},
{ .host_type = CK804,
.enable_hotplug = nv_enable_hotplug_ck804,
.disable_hotplug= nv_disable_hotplug_ck804,
.check_hotplug = nv_check_hotplug_ck804,
},
};
struct nv_host
{
struct nv_host_desc *host_desc;
unsigned long host_flags;
};
static struct pci_driver nv_pci_driver = {
.name = DRV_NAME,
.id_table = nv_pci_tbl,
.probe = nv_init_one,
.remove = ata_pci_remove_one,
};
static struct scsi_host_template nv_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.eh_timed_out = ata_scsi_timed_out,
.eh_strategy_handler = ata_scsi_error,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.bios_param = ata_std_bios_param,
};
static const struct ata_port_operations nv_ops = {
.port_disable = ata_port_disable,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.exec_command = ata_exec_command,
.check_status = ata_check_status,
.dev_select = ata_std_dev_select,
.phy_reset = sata_phy_reset,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.eng_timeout = ata_eng_timeout,
.irq_handler = nv_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.scr_read = nv_scr_read,
.scr_write = nv_scr_write,
.port_start = ata_port_start,
.port_stop = ata_port_stop,
.host_stop = nv_host_stop,
};
/* FIXME: The hardware provides the necessary SATA PHY controls
* to support ATA_FLAG_SATA_RESET. However, it is currently
* necessary to disable that flag, to solve misdetection problems.
* See http://bugme.osdl.org/show_bug.cgi?id=3352 for more info.
*
* This problem really needs to be investigated further. But in the
* meantime, we avoid ATA_FLAG_SATA_RESET to get people working.
*/
static struct ata_port_info nv_port_info = {
.sht = &nv_sht,
.host_flags = ATA_FLAG_SATA |
/* ATA_FLAG_SATA_RESET | */
ATA_FLAG_SRST |
ATA_FLAG_NO_LEGACY,
.pio_mask = NV_PIO_MASK,
.mwdma_mask = NV_MWDMA_MASK,
.udma_mask = NV_UDMA_MASK,
.port_ops = &nv_ops,
};
MODULE_AUTHOR("NVIDIA");
MODULE_DESCRIPTION("low-level driver for NVIDIA nForce SATA controller");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, nv_pci_tbl);
MODULE_VERSION(DRV_VERSION);
static irqreturn_t nv_interrupt (int irq, void *dev_instance,
struct pt_regs *regs)
{
struct ata_host_set *host_set = dev_instance;
struct nv_host *host = host_set->private_data;
unsigned int i;
unsigned int handled = 0;
unsigned long flags;
spin_lock_irqsave(&host_set->lock, flags);
for (i = 0; i < host_set->n_ports; i++) {
struct ata_port *ap;
ap = host_set->ports[i];
if (ap &&
!(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))) {
struct ata_queued_cmd *qc;
qc = ata_qc_from_tag(ap, ap->active_tag);
if (qc && (!(qc->tf.ctl & ATA_NIEN)))
handled += ata_host_intr(ap, qc);
else
// No request pending? Clear interrupt status
// anyway, in case there's one pending.
ap->ops->check_status(ap);
}
}
if (host->host_desc->check_hotplug)
handled += host->host_desc->check_hotplug(host_set);
spin_unlock_irqrestore(&host_set->lock, flags);
return IRQ_RETVAL(handled);
}
static u32 nv_scr_read (struct ata_port *ap, unsigned int sc_reg)
{
struct ata_host_set *host_set = ap->host_set;
struct nv_host *host = host_set->private_data;
if (sc_reg > SCR_CONTROL)
return 0xffffffffU;
if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO)
return readl((void __iomem *)ap->ioaddr.scr_addr + (sc_reg * 4));
else
return inl(ap->ioaddr.scr_addr + (sc_reg * 4));
}
static void nv_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
{
struct ata_host_set *host_set = ap->host_set;
struct nv_host *host = host_set->private_data;
if (sc_reg > SCR_CONTROL)
return;
if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO)
writel(val, (void __iomem *)ap->ioaddr.scr_addr + (sc_reg * 4));
else
outl(val, ap->ioaddr.scr_addr + (sc_reg * 4));
}
static void nv_host_stop (struct ata_host_set *host_set)
{
struct nv_host *host = host_set->private_data;
struct pci_dev *pdev = to_pci_dev(host_set->dev);
// Disable hotplug event interrupts.
if (host->host_desc->disable_hotplug)
host->host_desc->disable_hotplug(host_set);
kfree(host);
if (host_set->mmio_base)
pci_iounmap(pdev, host_set->mmio_base);
}
static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version = 0;
struct nv_host *host;
struct ata_port_info *ppi;
struct ata_probe_ent *probe_ent;
int pci_dev_busy = 0;
int rc;
u32 bar;
// Make sure this is a SATA controller by counting the number of bars
// (NVIDIA SATA controllers will always have six bars). Otherwise,
// it's an IDE controller and we ignore it.
for (bar=0; bar<6; bar++)
if (pci_resource_start(pdev, bar) == 0)
return -ENODEV;
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
rc = pci_enable_device(pdev);
if (rc)
goto err_out;
rc = pci_request_regions(pdev, DRV_NAME);
if (rc) {
pci_dev_busy = 1;
goto err_out_disable;
}
rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
if (rc)
goto err_out_regions;
rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
if (rc)
goto err_out_regions;
rc = -ENOMEM;
ppi = &nv_port_info;
probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
if (!probe_ent)
goto err_out_regions;
host = kmalloc(sizeof(struct nv_host), GFP_KERNEL);
if (!host)
goto err_out_free_ent;
memset(host, 0, sizeof(struct nv_host));
host->host_desc = &nv_device_tbl[ent->driver_data];
probe_ent->private_data = host;
if (pci_resource_flags(pdev, 5) & IORESOURCE_MEM)
host->host_flags |= NV_HOST_FLAGS_SCR_MMIO;
if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO) {
unsigned long base;
probe_ent->mmio_base = pci_iomap(pdev, 5, 0);
if (probe_ent->mmio_base == NULL) {
rc = -EIO;
goto err_out_free_host;
}
base = (unsigned long)probe_ent->mmio_base;
probe_ent->port[0].scr_addr =
base + NV_PORT0_SCR_REG_OFFSET;
probe_ent->port[1].scr_addr =
base + NV_PORT1_SCR_REG_OFFSET;
} else {
probe_ent->port[0].scr_addr =
pci_resource_start(pdev, 5) | NV_PORT0_SCR_REG_OFFSET;
probe_ent->port[1].scr_addr =
pci_resource_start(pdev, 5) | NV_PORT1_SCR_REG_OFFSET;
}
pci_set_master(pdev);
rc = ata_device_add(probe_ent);
if (rc != NV_PORTS)
goto err_out_iounmap;
// Enable hotplug event interrupts.
if (host->host_desc->enable_hotplug)
host->host_desc->enable_hotplug(probe_ent);
kfree(probe_ent);
return 0;
err_out_iounmap:
if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO)
pci_iounmap(pdev, probe_ent->mmio_base);
err_out_free_host:
kfree(host);
err_out_free_ent:
kfree(probe_ent);
err_out_regions:
pci_release_regions(pdev);
err_out_disable:
if (!pci_dev_busy)
pci_disable_device(pdev);
err_out:
return rc;
}
static void nv_enable_hotplug(struct ata_probe_ent *probe_ent)
{
u8 intr_mask;
outb(NV_INT_STATUS_HOTPLUG,
probe_ent->port[0].scr_addr + NV_INT_STATUS);
intr_mask = inb(probe_ent->port[0].scr_addr + NV_INT_ENABLE);
intr_mask |= NV_INT_ENABLE_HOTPLUG;
outb(intr_mask, probe_ent->port[0].scr_addr + NV_INT_ENABLE);
}
static void nv_disable_hotplug(struct ata_host_set *host_set)
{
u8 intr_mask;
intr_mask = inb(host_set->ports[0]->ioaddr.scr_addr + NV_INT_ENABLE);
intr_mask &= ~(NV_INT_ENABLE_HOTPLUG);
outb(intr_mask, host_set->ports[0]->ioaddr.scr_addr + NV_INT_ENABLE);
}
static int nv_check_hotplug(struct ata_host_set *host_set)
{
u8 intr_status;
intr_status = inb(host_set->ports[0]->ioaddr.scr_addr + NV_INT_STATUS);
// Clear interrupt status.
outb(0xff, host_set->ports[0]->ioaddr.scr_addr + NV_INT_STATUS);
if (intr_status & NV_INT_STATUS_HOTPLUG) {
if (intr_status & NV_INT_STATUS_PDEV_ADDED)
printk(KERN_WARNING "nv_sata: "
"Primary device added\n");
if (intr_status & NV_INT_STATUS_PDEV_REMOVED)
printk(KERN_WARNING "nv_sata: "
"Primary device removed\n");
if (intr_status & NV_INT_STATUS_SDEV_ADDED)
printk(KERN_WARNING "nv_sata: "
"Secondary device added\n");
if (intr_status & NV_INT_STATUS_SDEV_REMOVED)
printk(KERN_WARNING "nv_sata: "
"Secondary device removed\n");
return 1;
}
return 0;
}
static void nv_enable_hotplug_ck804(struct ata_probe_ent *probe_ent)
{
struct pci_dev *pdev = to_pci_dev(probe_ent->dev);
u8 intr_mask;
u8 regval;
pci_read_config_byte(pdev, NV_MCP_SATA_CFG_20, &regval);
regval |= NV_MCP_SATA_CFG_20_SATA_SPACE_EN;
pci_write_config_byte(pdev, NV_MCP_SATA_CFG_20, regval);
writeb(NV_INT_STATUS_HOTPLUG, probe_ent->mmio_base + NV_INT_STATUS_CK804);
intr_mask = readb(probe_ent->mmio_base + NV_INT_ENABLE_CK804);
intr_mask |= NV_INT_ENABLE_HOTPLUG;
writeb(intr_mask, probe_ent->mmio_base + NV_INT_ENABLE_CK804);
}
static void nv_disable_hotplug_ck804(struct ata_host_set *host_set)
{
struct pci_dev *pdev = to_pci_dev(host_set->dev);
u8 intr_mask;
u8 regval;
intr_mask = readb(host_set->mmio_base + NV_INT_ENABLE_CK804);
intr_mask &= ~(NV_INT_ENABLE_HOTPLUG);
writeb(intr_mask, host_set->mmio_base + NV_INT_ENABLE_CK804);
pci_read_config_byte(pdev, NV_MCP_SATA_CFG_20, &regval);
regval &= ~NV_MCP_SATA_CFG_20_SATA_SPACE_EN;
pci_write_config_byte(pdev, NV_MCP_SATA_CFG_20, regval);
}
static int nv_check_hotplug_ck804(struct ata_host_set *host_set)
{
u8 intr_status;
intr_status = readb(host_set->mmio_base + NV_INT_STATUS_CK804);
// Clear interrupt status.
writeb(0xff, host_set->mmio_base + NV_INT_STATUS_CK804);
if (intr_status & NV_INT_STATUS_HOTPLUG) {
if (intr_status & NV_INT_STATUS_PDEV_ADDED)
printk(KERN_WARNING "nv_sata: "
"Primary device added\n");
if (intr_status & NV_INT_STATUS_PDEV_REMOVED)
printk(KERN_WARNING "nv_sata: "
"Primary device removed\n");
if (intr_status & NV_INT_STATUS_SDEV_ADDED)
printk(KERN_WARNING "nv_sata: "
"Secondary device added\n");
if (intr_status & NV_INT_STATUS_SDEV_REMOVED)
printk(KERN_WARNING "nv_sata: "
"Secondary device removed\n");
return 1;
}
return 0;
}
static int __init nv_init(void)
{
return pci_module_init(&nv_pci_driver);
}
static void __exit nv_exit(void)
{
pci_unregister_driver(&nv_pci_driver);
}
module_init(nv_init);
module_exit(nv_exit);
View Git Blame Copy Permalink