c0222ac086
Pull MIPS updates from Ralf Baechle:
"This is an unusually large pull request for MIPS - in parts because
lots of patches missed the 3.18 deadline but primarily because some
folks opened the flood gates.
- Retire the MIPS-specific phys_t with the generic phys_addr_t.
- Improvments for the backtrace code used by oprofile.
- Better backtraces on SMP systems.
- Cleanups for the Octeon platform code.
- Cleanups and fixes for the Loongson platform code.
- Cleanups and fixes to the firmware library.
- Switch ATH79 platform to use the firmware library.
- Grand overhault to the SEAD3 and Malta interrupt code.
- Move the GIC interrupt code to drivers/irqchip
- Lots of GIC cleanups and updates to the GIC code to use modern IRQ
infrastructures and features of the kernel.
- OF documentation updates for the GIC bindings
- Move GIC clocksource driver to drivers/clocksource
- Merge GIC clocksource driver with clockevent driver.
- Further updates to bring the GIC clocksource driver up to date.
- R3000 TLB code cleanups
- Improvments to the Loongson 3 platform code.
- Convert pr_warning to pr_warn.
- Merge a bunch of small lantiq and ralink fixes that have been
staged/lingering inside the openwrt tree for a while.
- Update archhelp for IP22/IP32
- Fix a number of issues for Loongson 1B.
- New clocksource and clockevent driver for Loongson 1B.
- Further work on clk handling for Loongson 1B.
- Platform work for Broadcom BMIPS.
- Error handling cleanups for TurboChannel.
- Fixes and optimization to the microMIPS support.
- Option to disable the FTLB.
- Dump more relevant information on machine check exception
- Change binfmt to allow arch to examine PT_*PROC headers
- Support for new style FPU register model in O32
- VDSO randomization.
- BCM47xx cleanups
- BCM47xx reimplement the way the kernel accesses NVRAM information.
- Random cleanups
- Add support for ATH25 platforms
- Remove pointless locking code in some PCI platforms.
- Some improvments to EVA support
- Minor Alchemy cleanup"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (185 commits)
MIPS: Add MFHC0 and MTHC0 instructions to uasm.
MIPS: Cosmetic cleanups of page table headers.
MIPS: Add CP0 macros for extended EntryLo registers
MIPS: Remove now unused definition of phys_t.
MIPS: Replace use of phys_t with phys_addr_t.
MIPS: Replace MIPS-specific 64BIT_PHYS_ADDR with generic PHYS_ADDR_T_64BIT
PCMCIA: Alchemy Don't select 64BIT_PHYS_ADDR in Kconfig.
MIPS: lib: memset: Clean up some MIPS{EL,EB} ifdefery
MIPS: iomap: Use __mem_{read,write}{b,w,l} for MMIO
MIPS: <asm/types.h> fix indentation.
MAINTAINERS: Add entry for BMIPS multiplatform kernel
MIPS: Enable VDSO randomization
MIPS: Remove a temporary hack for debugging cache flushes in SMTC configuration
MIPS: Remove declaration of obsolete arch_init_clk_ops()
MIPS: atomic.h: Reformat to fit in 79 columns
MIPS: Apply `.insn' to fixup labels throughout
MIPS: Fix microMIPS LL/SC immediate offsets
MIPS: Kconfig: Only allow 32-bit microMIPS builds
MIPS: signal.c: Fix an invalid cast in ISA mode bit handling
MIPS: mm: Only build one microassembler that is suitable
...
51 lines
2.2 KiB
Makefile
51 lines
2.2 KiB
Makefile
obj-$(CONFIG_CLKSRC_OF) += clksrc-of.o
|
|
obj-$(CONFIG_ATMEL_PIT) += timer-atmel-pit.o
|
|
obj-$(CONFIG_ATMEL_TCB_CLKSRC) += tcb_clksrc.o
|
|
obj-$(CONFIG_X86_PM_TIMER) += acpi_pm.o
|
|
obj-$(CONFIG_SCx200HR_TIMER) += scx200_hrt.o
|
|
obj-$(CONFIG_CS5535_CLOCK_EVENT_SRC) += cs5535-clockevt.o
|
|
obj-$(CONFIG_SH_TIMER_CMT) += sh_cmt.o
|
|
obj-$(CONFIG_SH_TIMER_MTU2) += sh_mtu2.o
|
|
obj-$(CONFIG_SH_TIMER_TMU) += sh_tmu.o
|
|
obj-$(CONFIG_EM_TIMER_STI) += em_sti.o
|
|
obj-$(CONFIG_CLKBLD_I8253) += i8253.o
|
|
obj-$(CONFIG_CLKSRC_MMIO) += mmio.o
|
|
obj-$(CONFIG_DW_APB_TIMER) += dw_apb_timer.o
|
|
obj-$(CONFIG_DW_APB_TIMER_OF) += dw_apb_timer_of.o
|
|
obj-$(CONFIG_CLKSRC_NOMADIK_MTU) += nomadik-mtu.o
|
|
obj-$(CONFIG_CLKSRC_DBX500_PRCMU) += clksrc-dbx500-prcmu.o
|
|
obj-$(CONFIG_ARMADA_370_XP_TIMER) += time-armada-370-xp.o
|
|
obj-$(CONFIG_ORION_TIMER) += time-orion.o
|
|
obj-$(CONFIG_ARCH_BCM2835) += bcm2835_timer.o
|
|
obj-$(CONFIG_ARCH_CLPS711X) += clps711x-timer.o
|
|
obj-$(CONFIG_ARCH_MARCO) += timer-marco.o
|
|
obj-$(CONFIG_ARCH_MOXART) += moxart_timer.o
|
|
obj-$(CONFIG_ARCH_MXS) += mxs_timer.o
|
|
obj-$(CONFIG_ARCH_PXA) += pxa_timer.o
|
|
obj-$(CONFIG_ARCH_PRIMA2) += timer-prima2.o
|
|
obj-$(CONFIG_ARCH_U300) += timer-u300.o
|
|
obj-$(CONFIG_SUN4I_TIMER) += sun4i_timer.o
|
|
obj-$(CONFIG_SUN5I_HSTIMER) += timer-sun5i.o
|
|
obj-$(CONFIG_MESON6_TIMER) += meson6_timer.o
|
|
obj-$(CONFIG_ARCH_TEGRA) += tegra20_timer.o
|
|
obj-$(CONFIG_VT8500_TIMER) += vt8500_timer.o
|
|
obj-$(CONFIG_ARCH_NSPIRE) += zevio-timer.o
|
|
obj-$(CONFIG_ARCH_BCM_MOBILE) += bcm_kona_timer.o
|
|
obj-$(CONFIG_CADENCE_TTC_TIMER) += cadence_ttc_timer.o
|
|
obj-$(CONFIG_CLKSRC_EFM32) += time-efm32.o
|
|
obj-$(CONFIG_CLKSRC_EXYNOS_MCT) += exynos_mct.o
|
|
obj-$(CONFIG_CLKSRC_SAMSUNG_PWM) += samsung_pwm_timer.o
|
|
obj-$(CONFIG_FSL_FTM_TIMER) += fsl_ftm_timer.o
|
|
obj-$(CONFIG_VF_PIT_TIMER) += vf_pit_timer.o
|
|
obj-$(CONFIG_CLKSRC_QCOM) += qcom-timer.o
|
|
obj-$(CONFIG_MTK_TIMER) += mtk_timer.o
|
|
|
|
obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o
|
|
obj-$(CONFIG_ARM_GLOBAL_TIMER) += arm_global_timer.o
|
|
obj-$(CONFIG_CLKSRC_METAG_GENERIC) += metag_generic.o
|
|
obj-$(CONFIG_ARCH_HAS_TICK_BROADCAST) += dummy_timer.o
|
|
obj-$(CONFIG_ARCH_KEYSTONE) += timer-keystone.o
|
|
obj-$(CONFIG_ARCH_INTEGRATOR_AP) += timer-integrator-ap.o
|
|
obj-$(CONFIG_CLKSRC_VERSATILE) += versatile.o
|
|
obj-$(CONFIG_CLKSRC_MIPS_GIC) += mips-gic-timer.o
|