1
linux/drivers/video/pxafb.h
Matthias Kaehlcke b91dbce56a pxafb: convert ctrlr_sem in a mutex
The semaphore ctrlr_sem is used as a mutex.  Convert it to the mutex API.

Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
Cc: Daniel Mack <daniel@caiaq.de>
Cc: Eric Miao <eric.miao@marvell.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:37 -07:00

152 lines
3.2 KiB
C

#ifndef __PXAFB_H__
#define __PXAFB_H__
/*
* linux/drivers/video/pxafb.h
* -- Intel PXA250/210 LCD Controller Frame Buffer Device
*
* Copyright (C) 1999 Eric A. Thomas.
* Copyright (C) 2004 Jean-Frederic Clere.
* Copyright (C) 2004 Ian Campbell.
* Copyright (C) 2004 Jeff Lackey.
* Based on sa1100fb.c Copyright (C) 1999 Eric A. Thomas
* which in turn is
* Based on acornfb.c Copyright (C) Russell King.
*
* 2001-08-03: Cliff Brake <cbrake@acclent.com>
* - ported SA1100 code to PXA
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive
* for more details.
*/
/* PXA LCD DMA descriptor */
struct pxafb_dma_descriptor {
unsigned int fdadr;
unsigned int fsadr;
unsigned int fidr;
unsigned int ldcmd;
};
enum {
PAL_NONE = -1,
PAL_BASE = 0,
PAL_OV1 = 1,
PAL_OV2 = 2,
PAL_MAX,
};
enum {
DMA_BASE = 0,
DMA_UPPER = 0,
DMA_LOWER = 1,
DMA_OV1 = 1,
DMA_OV2_Y = 2,
DMA_OV2_Cb = 3,
DMA_OV2_Cr = 4,
DMA_CURSOR = 5,
DMA_CMD = 6,
DMA_MAX,
};
/* maximum palette size - 256 entries, each 4 bytes long */
#define PALETTE_SIZE (256 * 4)
#define CMD_BUFF_SIZE (1024 * 50)
struct pxafb_dma_buff {
unsigned char palette[PAL_MAX * PALETTE_SIZE];
uint16_t cmd_buff[CMD_BUFF_SIZE];
struct pxafb_dma_descriptor pal_desc[PAL_MAX];
struct pxafb_dma_descriptor dma_desc[DMA_MAX];
};
struct pxafb_info {
struct fb_info fb;
struct device *dev;
struct clk *clk;
void __iomem *mmio_base;
struct pxafb_dma_buff *dma_buff;
dma_addr_t dma_buff_phys;
dma_addr_t fdadr[DMA_MAX];
/*
* These are the addresses we mapped
* the framebuffer memory region to.
*/
/* raw memory addresses */
dma_addr_t map_dma; /* physical */
u_char * map_cpu; /* virtual */
u_int map_size;
/* addresses of pieces placed in raw buffer */
u_char * screen_cpu; /* virtual address of frame buffer */
dma_addr_t screen_dma; /* physical address of frame buffer */
u16 * palette_cpu; /* virtual address of palette memory */
u_int palette_size;
ssize_t video_offset;
u_int lccr0;
u_int lccr3;
u_int lccr4;
u_int cmap_inverse:1,
cmap_static:1,
unused:30;
u_int reg_lccr0;
u_int reg_lccr1;
u_int reg_lccr2;
u_int reg_lccr3;
u_int reg_lccr4;
u_int reg_cmdcr;
unsigned long hsync_time;
volatile u_char state;
volatile u_char task_state;
struct mutex ctrlr_lock;
wait_queue_head_t ctrlr_wait;
struct work_struct task;
struct completion disable_done;
#ifdef CONFIG_FB_PXA_SMARTPANEL
uint16_t *smart_cmds;
size_t n_smart_cmds;
struct completion command_done;
struct completion refresh_done;
struct task_struct *smart_thread;
#endif
#ifdef CONFIG_CPU_FREQ
struct notifier_block freq_transition;
struct notifier_block freq_policy;
#endif
};
#define TO_INF(ptr,member) container_of(ptr,struct pxafb_info,member)
/*
* These are the actions for set_ctrlr_state
*/
#define C_DISABLE (0)
#define C_ENABLE (1)
#define C_DISABLE_CLKCHANGE (2)
#define C_ENABLE_CLKCHANGE (3)
#define C_REENABLE (4)
#define C_DISABLE_PM (5)
#define C_ENABLE_PM (6)
#define C_STARTUP (7)
#define PXA_NAME "PXA"
/*
* Minimum X and Y resolutions
*/
#define MIN_XRES 64
#define MIN_YRES 64
#endif /* __PXAFB_H__ */