1
linux/drivers/scsi/libsas/sas_phy.c
Dan Williams 90f1e10d08 [SCSI] libsas: fix/amend device gone notification in sas_deform_port()
Commit 56dd2c06 "libsas: Don't issue commands to devices that have been
hot-removed" edited Darrick's original patch to remove setting 'gone' in
the sas_deform_port() path because that prevented scsi sync cache
commands from being issued when the driver was unloaded.  However, this
allows true device gone notifications (as signaled port phy events) to
trigger sync cache commands to devices that are known to be unreachable.

Teach libsas which sas_deform_port() invocations are likely device gone
events.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-05-26 22:49:32 -05:00

172 lines
4.8 KiB
C

/*
* Serial Attached SCSI (SAS) Phy class
*
* Copyright (C) 2005 Adaptec, Inc. All rights reserved.
* Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
*
* This file is licensed under GPLv2.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#include "sas_internal.h"
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport.h>
#include <scsi/scsi_transport_sas.h>
#include "../scsi_sas_internal.h"
/* ---------- Phy events ---------- */
static void sas_phye_loss_of_signal(struct work_struct *work)
{
struct asd_sas_event *ev =
container_of(work, struct asd_sas_event, work);
struct asd_sas_phy *phy = ev->phy;
sas_begin_event(PHYE_LOSS_OF_SIGNAL, &phy->ha->event_lock,
&phy->phy_events_pending);
phy->error = 0;
sas_deform_port(phy, 1);
}
static void sas_phye_oob_done(struct work_struct *work)
{
struct asd_sas_event *ev =
container_of(work, struct asd_sas_event, work);
struct asd_sas_phy *phy = ev->phy;
sas_begin_event(PHYE_OOB_DONE, &phy->ha->event_lock,
&phy->phy_events_pending);
phy->error = 0;
}
static void sas_phye_oob_error(struct work_struct *work)
{
struct asd_sas_event *ev =
container_of(work, struct asd_sas_event, work);
struct asd_sas_phy *phy = ev->phy;
struct sas_ha_struct *sas_ha = phy->ha;
struct asd_sas_port *port = phy->port;
struct sas_internal *i =
to_sas_internal(sas_ha->core.shost->transportt);
sas_begin_event(PHYE_OOB_ERROR, &phy->ha->event_lock,
&phy->phy_events_pending);
sas_deform_port(phy, 1);
if (!port && phy->enabled && i->dft->lldd_control_phy) {
phy->error++;
switch (phy->error) {
case 1:
case 2:
i->dft->lldd_control_phy(phy, PHY_FUNC_HARD_RESET,
NULL);
break;
case 3:
default:
phy->error = 0;
phy->enabled = 0;
i->dft->lldd_control_phy(phy, PHY_FUNC_DISABLE, NULL);
break;
}
}
}
static void sas_phye_spinup_hold(struct work_struct *work)
{
struct asd_sas_event *ev =
container_of(work, struct asd_sas_event, work);
struct asd_sas_phy *phy = ev->phy;
struct sas_ha_struct *sas_ha = phy->ha;
struct sas_internal *i =
to_sas_internal(sas_ha->core.shost->transportt);
sas_begin_event(PHYE_SPINUP_HOLD, &phy->ha->event_lock,
&phy->phy_events_pending);
phy->error = 0;
i->dft->lldd_control_phy(phy, PHY_FUNC_RELEASE_SPINUP_HOLD, NULL);
}
/* ---------- Phy class registration ---------- */
int sas_register_phys(struct sas_ha_struct *sas_ha)
{
int i;
static const work_func_t sas_phy_event_fns[PHY_NUM_EVENTS] = {
[PHYE_LOSS_OF_SIGNAL] = sas_phye_loss_of_signal,
[PHYE_OOB_DONE] = sas_phye_oob_done,
[PHYE_OOB_ERROR] = sas_phye_oob_error,
[PHYE_SPINUP_HOLD] = sas_phye_spinup_hold,
};
static const work_func_t sas_port_event_fns[PORT_NUM_EVENTS] = {
[PORTE_BYTES_DMAED] = sas_porte_bytes_dmaed,
[PORTE_BROADCAST_RCVD] = sas_porte_broadcast_rcvd,
[PORTE_LINK_RESET_ERR] = sas_porte_link_reset_err,
[PORTE_TIMER_EVENT] = sas_porte_timer_event,
[PORTE_HARD_RESET] = sas_porte_hard_reset,
};
/* Now register the phys. */
for (i = 0; i < sas_ha->num_phys; i++) {
int k;
struct asd_sas_phy *phy = sas_ha->sas_phy[i];
phy->error = 0;
INIT_LIST_HEAD(&phy->port_phy_el);
for (k = 0; k < PORT_NUM_EVENTS; k++) {
INIT_WORK(&phy->port_events[k].work,
sas_port_event_fns[k]);
phy->port_events[k].phy = phy;
}
for (k = 0; k < PHY_NUM_EVENTS; k++) {
INIT_WORK(&phy->phy_events[k].work,
sas_phy_event_fns[k]);
phy->phy_events[k].phy = phy;
}
phy->port = NULL;
phy->ha = sas_ha;
spin_lock_init(&phy->frame_rcvd_lock);
spin_lock_init(&phy->sas_prim_lock);
phy->frame_rcvd_size = 0;
phy->phy = sas_phy_alloc(&sas_ha->core.shost->shost_gendev,
i);
if (!phy->phy)
return -ENOMEM;
phy->phy->identify.initiator_port_protocols =
phy->iproto;
phy->phy->identify.target_port_protocols = phy->tproto;
phy->phy->identify.sas_address = SAS_ADDR(sas_ha->sas_addr);
phy->phy->identify.phy_identifier = i;
phy->phy->minimum_linkrate_hw = SAS_LINK_RATE_UNKNOWN;
phy->phy->maximum_linkrate_hw = SAS_LINK_RATE_UNKNOWN;
phy->phy->minimum_linkrate = SAS_LINK_RATE_UNKNOWN;
phy->phy->maximum_linkrate = SAS_LINK_RATE_UNKNOWN;
phy->phy->negotiated_linkrate = SAS_LINK_RATE_UNKNOWN;
sas_phy_add(phy->phy);
}
return 0;
}