1
linux/drivers/usb
Alan Stern b6f6436da0 USB: move bus_suspend and bus_resume method calls
This patch (as885) moves the root-hub bus_suspend() and bus_resume()
method calls from the hub driver's suspend and resume methods into the
usb_generic driver methods, where they make just as much sense.

Their old locations were not fully correct.  For example, in a kernel
compiled without CONFIG_USB_SUSPEND, if one were to do:

	echo -n 1-0:1.0 >/sys/bus/usb/drivers/hub/unbind

to unbind the hub driver from a root hub, there would then be no way
to suspend that root hub.  Attempts to put the system to sleep would
fail; the USB controller driver would refuse to suspend because the
root hub was still active.

The patch also makes a very slight change in the way devices with no
driver are handled during suspend.  Rather than doing a standard USB
port-suspend directly, now the suspend routine in usb_generic is
called.  In practice this should never affect anyone.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12 16:29:46 -07:00
..
atm USB: cxacru: Cleanup sysfs attribute code 2007-07-12 16:29:45 -07:00
class usblp: Don't let suspend to kill ->used 2007-06-08 16:24:29 -07:00
core USB: move bus_suspend and bus_resume method calls 2007-07-12 16:29:46 -07:00
gadget USB: m66592-udc: fix use old interrupt flags 2007-07-12 16:29:45 -07:00
host USB: r8a66597-hcd: fix NULL access 2007-07-12 16:29:45 -07:00
image header cleaning: don't include smp_lock.h when not used 2007-05-08 11:15:07 -07:00
misc potential compiler error, irqfunc caller sites update 2007-07-06 10:23:43 -07:00
mon header cleaning: don't include smp_lock.h when not used 2007-05-08 11:15:07 -07:00
serial USB Serial Keyspan: add support for USA-49WG & USA-28XG 2007-07-12 16:29:45 -07:00
storage USB: UNUSUAL_DEV: Sync up some reported devices from Ubuntu 2007-06-08 16:24:30 -07:00
Kconfig [S390] Kconfig: menus with depends on HAS_IOMEM. 2007-05-10 15:46:07 +02:00
Makefile USB: r8a66597-hcd: host controller driver for R8A66597 2007-07-12 16:29:45 -07:00
README
usb-skeleton.c USB: kill BKL in skeleton driver 2007-04-27 13:28:33 -07:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
input/		- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
media/		- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.