1
linux/drivers/mfd/pm8xxx-irq.c
Abhijeet Dharmapurikar c013f0a56c mfd: Add pm8xxx irq support
Add support for the irq controller in Qualcomm 8xxx pmic. The 8xxx
interrupt controller provides control for gpio and mpp configured as
interrupts in addition to other subdevice interrupts. The interrupt
controller also provides a way to read the real time status of an
interrupt. This real time status is the only way one can get the
input values of gpio and mpp lines.

Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26 19:45:28 +02:00

372 lines
9.4 KiB
C

/*
* Copyright (c) 2011, Code Aurora Forum. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#define pr_fmt(fmt) "%s: " fmt, __func__
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/mfd/pm8xxx/core.h>
#include <linux/mfd/pm8xxx/irq.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
/* PMIC8xxx IRQ */
#define SSBI_REG_ADDR_IRQ_BASE 0x1BB
#define SSBI_REG_ADDR_IRQ_ROOT (SSBI_REG_ADDR_IRQ_BASE + 0)
#define SSBI_REG_ADDR_IRQ_M_STATUS1 (SSBI_REG_ADDR_IRQ_BASE + 1)
#define SSBI_REG_ADDR_IRQ_M_STATUS2 (SSBI_REG_ADDR_IRQ_BASE + 2)
#define SSBI_REG_ADDR_IRQ_M_STATUS3 (SSBI_REG_ADDR_IRQ_BASE + 3)
#define SSBI_REG_ADDR_IRQ_M_STATUS4 (SSBI_REG_ADDR_IRQ_BASE + 4)
#define SSBI_REG_ADDR_IRQ_BLK_SEL (SSBI_REG_ADDR_IRQ_BASE + 5)
#define SSBI_REG_ADDR_IRQ_IT_STATUS (SSBI_REG_ADDR_IRQ_BASE + 6)
#define SSBI_REG_ADDR_IRQ_CONFIG (SSBI_REG_ADDR_IRQ_BASE + 7)
#define SSBI_REG_ADDR_IRQ_RT_STATUS (SSBI_REG_ADDR_IRQ_BASE + 8)
#define PM_IRQF_LVL_SEL 0x01 /* level select */
#define PM_IRQF_MASK_FE 0x02 /* mask falling edge */
#define PM_IRQF_MASK_RE 0x04 /* mask rising edge */
#define PM_IRQF_CLR 0x08 /* clear interrupt */
#define PM_IRQF_BITS_MASK 0x70
#define PM_IRQF_BITS_SHIFT 4
#define PM_IRQF_WRITE 0x80
#define PM_IRQF_MASK_ALL (PM_IRQF_MASK_FE | \
PM_IRQF_MASK_RE)
struct pm_irq_chip {
struct device *dev;
spinlock_t pm_irq_lock;
unsigned int devirq;
unsigned int irq_base;
unsigned int num_irqs;
unsigned int num_blocks;
unsigned int num_masters;
u8 config[0];
};
static int pm8xxx_read_root_irq(const struct pm_irq_chip *chip, u8 *rp)
{
return pm8xxx_readb(chip->dev, SSBI_REG_ADDR_IRQ_ROOT, rp);
}
static int pm8xxx_read_master_irq(const struct pm_irq_chip *chip, u8 m, u8 *bp)
{
return pm8xxx_readb(chip->dev,
SSBI_REG_ADDR_IRQ_M_STATUS1 + m, bp);
}
static int pm8xxx_read_block_irq(struct pm_irq_chip *chip, u8 bp, u8 *ip)
{
int rc;
spin_lock(&chip->pm_irq_lock);
rc = pm8xxx_writeb(chip->dev, SSBI_REG_ADDR_IRQ_BLK_SEL, bp);
if (rc) {
pr_err("Failed Selecting Block %d rc=%d\n", bp, rc);
goto bail;
}
rc = pm8xxx_readb(chip->dev, SSBI_REG_ADDR_IRQ_IT_STATUS, ip);
if (rc)
pr_err("Failed Reading Status rc=%d\n", rc);
bail:
spin_unlock(&chip->pm_irq_lock);
return rc;
}
static int pm8xxx_config_irq(struct pm_irq_chip *chip, u8 bp, u8 cp)
{
int rc;
spin_lock(&chip->pm_irq_lock);
rc = pm8xxx_writeb(chip->dev, SSBI_REG_ADDR_IRQ_BLK_SEL, bp);
if (rc) {
pr_err("Failed Selecting Block %d rc=%d\n", bp, rc);
goto bail;
}
cp |= PM_IRQF_WRITE;
rc = pm8xxx_writeb(chip->dev, SSBI_REG_ADDR_IRQ_CONFIG, cp);
if (rc)
pr_err("Failed Configuring IRQ rc=%d\n", rc);
bail:
spin_unlock(&chip->pm_irq_lock);
return rc;
}
static int pm8xxx_irq_block_handler(struct pm_irq_chip *chip, int block)
{
int pmirq, irq, i, ret = 0;
u8 bits;
ret = pm8xxx_read_block_irq(chip, block, &bits);
if (ret) {
pr_err("Failed reading %d block ret=%d", block, ret);
return ret;
}
if (!bits) {
pr_err("block bit set in master but no irqs: %d", block);
return 0;
}
/* Check IRQ bits */
for (i = 0; i < 8; i++) {
if (bits & (1 << i)) {
pmirq = block * 8 + i;
irq = pmirq + chip->irq_base;
generic_handle_irq(irq);
}
}
return 0;
}
static int pm8xxx_irq_master_handler(struct pm_irq_chip *chip, int master)
{
u8 blockbits;
int block_number, i, ret = 0;
ret = pm8xxx_read_master_irq(chip, master, &blockbits);
if (ret) {
pr_err("Failed to read master %d ret=%d\n", master, ret);
return ret;
}
if (!blockbits) {
pr_err("master bit set in root but no blocks: %d", master);
return 0;
}
for (i = 0; i < 8; i++)
if (blockbits & (1 << i)) {
block_number = master * 8 + i; /* block # */
ret |= pm8xxx_irq_block_handler(chip, block_number);
}
return ret;
}
static void pm8xxx_irq_handler(unsigned int irq, struct irq_desc *desc)
{
struct pm_irq_chip *chip = irq_desc_get_handler_data(desc);
struct irq_chip *irq_chip = irq_desc_get_chip(desc);
u8 root;
int i, ret, masters = 0;
ret = pm8xxx_read_root_irq(chip, &root);
if (ret) {
pr_err("Can't read root status ret=%d\n", ret);
return;
}
/* on pm8xxx series masters start from bit 1 of the root */
masters = root >> 1;
/* Read allowed masters for blocks. */
for (i = 0; i < chip->num_masters; i++)
if (masters & (1 << i))
pm8xxx_irq_master_handler(chip, i);
irq_chip->irq_ack(&desc->irq_data);
}
static void pm8xxx_irq_mask_ack(struct irq_data *d)
{
struct pm_irq_chip *chip = irq_data_get_irq_chip_data(d);
unsigned int pmirq = d->irq - chip->irq_base;
int master, irq_bit;
u8 block, config;
block = pmirq / 8;
master = block / 8;
irq_bit = pmirq % 8;
config = chip->config[pmirq] | PM_IRQF_MASK_ALL | PM_IRQF_CLR;
pm8xxx_config_irq(chip, block, config);
}
static void pm8xxx_irq_unmask(struct irq_data *d)
{
struct pm_irq_chip *chip = irq_data_get_irq_chip_data(d);
unsigned int pmirq = d->irq - chip->irq_base;
int master, irq_bit;
u8 block, config;
block = pmirq / 8;
master = block / 8;
irq_bit = pmirq % 8;
config = chip->config[pmirq];
pm8xxx_config_irq(chip, block, config);
}
static int pm8xxx_irq_set_type(struct irq_data *d, unsigned int flow_type)
{
struct pm_irq_chip *chip = irq_data_get_irq_chip_data(d);
unsigned int pmirq = d->irq - chip->irq_base;
int master, irq_bit;
u8 block, config;
block = pmirq / 8;
master = block / 8;
irq_bit = pmirq % 8;
chip->config[pmirq] = (irq_bit << PM_IRQF_BITS_SHIFT)
| PM_IRQF_MASK_ALL;
if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) {
if (flow_type & IRQF_TRIGGER_RISING)
chip->config[pmirq] &= ~PM_IRQF_MASK_RE;
if (flow_type & IRQF_TRIGGER_FALLING)
chip->config[pmirq] &= ~PM_IRQF_MASK_FE;
} else {
chip->config[pmirq] |= PM_IRQF_LVL_SEL;
if (flow_type & IRQF_TRIGGER_HIGH)
chip->config[pmirq] &= ~PM_IRQF_MASK_RE;
else
chip->config[pmirq] &= ~PM_IRQF_MASK_FE;
}
config = chip->config[pmirq] | PM_IRQF_CLR;
return pm8xxx_config_irq(chip, block, config);
}
static int pm8xxx_irq_set_wake(struct irq_data *d, unsigned int on)
{
return 0;
}
static struct irq_chip pm8xxx_irq_chip = {
.name = "pm8xxx",
.irq_mask_ack = pm8xxx_irq_mask_ack,
.irq_unmask = pm8xxx_irq_unmask,
.irq_set_type = pm8xxx_irq_set_type,
.irq_set_wake = pm8xxx_irq_set_wake,
.flags = IRQCHIP_MASK_ON_SUSPEND,
};
/**
* pm8xxx_get_irq_stat - get the status of the irq line
* @chip: pointer to identify a pmic irq controller
* @irq: the irq number
*
* The pm8xxx gpio and mpp rely on the interrupt block to read
* the values on their pins. This function is to facilitate reading
* the status of a gpio or an mpp line. The caller has to convert the
* gpio number to irq number.
*
* RETURNS:
* an int indicating the value read on that line
*/
int pm8xxx_get_irq_stat(struct pm_irq_chip *chip, int irq)
{
int pmirq, rc;
u8 block, bits, bit;
unsigned long flags;
if (chip == NULL || irq < chip->irq_base ||
irq >= chip->irq_base + chip->num_irqs)
return -EINVAL;
pmirq = irq - chip->irq_base;
block = pmirq / 8;
bit = pmirq % 8;
spin_lock_irqsave(&chip->pm_irq_lock, flags);
rc = pm8xxx_writeb(chip->dev, SSBI_REG_ADDR_IRQ_BLK_SEL, block);
if (rc) {
pr_err("Failed Selecting block irq=%d pmirq=%d blk=%d rc=%d\n",
irq, pmirq, block, rc);
goto bail_out;
}
rc = pm8xxx_readb(chip->dev, SSBI_REG_ADDR_IRQ_RT_STATUS, &bits);
if (rc) {
pr_err("Failed Configuring irq=%d pmirq=%d blk=%d rc=%d\n",
irq, pmirq, block, rc);
goto bail_out;
}
rc = (bits & (1 << bit)) ? 1 : 0;
bail_out:
spin_unlock_irqrestore(&chip->pm_irq_lock, flags);
return rc;
}
EXPORT_SYMBOL_GPL(pm8xxx_get_irq_stat);
struct pm_irq_chip * __devinit pm8xxx_irq_init(struct device *dev,
const struct pm8xxx_irq_platform_data *pdata)
{
struct pm_irq_chip *chip;
int devirq, rc;
unsigned int pmirq;
if (!pdata) {
pr_err("No platform data\n");
return ERR_PTR(-EINVAL);
}
devirq = pdata->devirq;
if (devirq < 0) {
pr_err("missing devirq\n");
rc = devirq;
return ERR_PTR(-EINVAL);
}
chip = kzalloc(sizeof(struct pm_irq_chip)
+ sizeof(u8) * pdata->irq_cdata.nirqs, GFP_KERNEL);
if (!chip) {
pr_err("Cannot alloc pm_irq_chip struct\n");
return ERR_PTR(-EINVAL);
}
chip->dev = dev;
chip->devirq = devirq;
chip->irq_base = pdata->irq_base;
chip->num_irqs = pdata->irq_cdata.nirqs;
chip->num_blocks = DIV_ROUND_UP(chip->num_irqs, 8);
chip->num_masters = DIV_ROUND_UP(chip->num_blocks, 8);
spin_lock_init(&chip->pm_irq_lock);
for (pmirq = 0; pmirq < chip->num_irqs; pmirq++) {
irq_set_chip_and_handler(chip->irq_base + pmirq,
&pm8xxx_irq_chip,
handle_level_irq);
irq_set_chip_data(chip->irq_base + pmirq, chip);
#ifdef CONFIG_ARM
set_irq_flags(chip->irq_base + pmirq, IRQF_VALID);
#else
irq_set_noprobe(chip->irq_base + pmirq);
#endif
}
irq_set_irq_type(devirq, pdata->irq_trigger_flag);
irq_set_handler_data(devirq, chip);
irq_set_chained_handler(devirq, pm8xxx_irq_handler);
set_irq_wake(devirq, 1);
return chip;
}
int __devexit pm8xxx_irq_exit(struct pm_irq_chip *chip)
{
irq_set_chained_handler(chip->devirq, NULL);
kfree(chip);
return 0;
}