1
linux/arch/mips/txx9/rbtx4927/setup.c
Atsushi Nemoto 864cbf804d MIPS: RBTX4927: Add GPIO-LED support
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-30 14:44:33 +00:00

368 lines
10 KiB
C

/*
* Toshiba rbtx4927 specific setup
*
* Author: MontaVista Software, Inc.
* source@mvista.com
*
* Copyright 2001-2002 MontaVista Software Inc.
*
* Copyright (C) 1996, 97, 2001, 04 Ralf Baechle (ralf@linux-mips.org)
* Copyright (C) 2000 RidgeRun, Inc.
* Author: RidgeRun, Inc.
* glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
*
* Copyright 2001 MontaVista Software Inc.
* Author: jsun@mvista.com or jsun@junsun.net
*
* Copyright 2002 MontaVista Software Inc.
* Author: Michael Pruznick, michael_pruznick@mvista.com
*
* Copyright (C) 2000-2001 Toshiba Corporation
*
* Copyright (C) 2004 MontaVista Software Inc.
* Author: Manish Lachwani, mlachwani@mvista.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/ioport.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/leds.h>
#include <asm/io.h>
#include <asm/reboot.h>
#include <asm/txx9/generic.h>
#include <asm/txx9/pci.h>
#include <asm/txx9/rbtx4927.h>
#include <asm/txx9/tx4938.h> /* for TX4937 */
#ifdef CONFIG_PCI
static void __init tx4927_pci_setup(void)
{
int extarb = !(__raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_PCIARB);
struct pci_controller *c = &txx9_primary_pcic;
register_pci_controller(c);
if (__raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_PCI66)
txx9_pci_option =
(txx9_pci_option & ~TXX9_PCI_OPT_CLK_MASK) |
TXX9_PCI_OPT_CLK_66; /* already configured */
/* Reset PCI Bus */
writeb(1, rbtx4927_pcireset_addr);
/* Reset PCIC */
txx9_set64(&tx4927_ccfgptr->clkctr, TX4927_CLKCTR_PCIRST);
if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) ==
TXX9_PCI_OPT_CLK_66)
tx4927_pciclk66_setup();
mdelay(10);
/* clear PCIC reset */
txx9_clear64(&tx4927_ccfgptr->clkctr, TX4927_CLKCTR_PCIRST);
writeb(0, rbtx4927_pcireset_addr);
iob();
tx4927_report_pciclk();
tx4927_pcic_setup(tx4927_pcicptr, c, extarb);
if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) ==
TXX9_PCI_OPT_CLK_AUTO &&
txx9_pci66_check(c, 0, 0)) {
/* Reset PCI Bus */
writeb(1, rbtx4927_pcireset_addr);
/* Reset PCIC */
txx9_set64(&tx4927_ccfgptr->clkctr, TX4927_CLKCTR_PCIRST);
tx4927_pciclk66_setup();
mdelay(10);
/* clear PCIC reset */
txx9_clear64(&tx4927_ccfgptr->clkctr, TX4927_CLKCTR_PCIRST);
writeb(0, rbtx4927_pcireset_addr);
iob();
/* Reinitialize PCIC */
tx4927_report_pciclk();
tx4927_pcic_setup(tx4927_pcicptr, c, extarb);
}
tx4927_setup_pcierr_irq();
}
static void __init tx4937_pci_setup(void)
{
int extarb = !(__raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCIARB);
struct pci_controller *c = &txx9_primary_pcic;
register_pci_controller(c);
if (__raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCI66)
txx9_pci_option =
(txx9_pci_option & ~TXX9_PCI_OPT_CLK_MASK) |
TXX9_PCI_OPT_CLK_66; /* already configured */
/* Reset PCI Bus */
writeb(1, rbtx4927_pcireset_addr);
/* Reset PCIC */
txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST);
if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) ==
TXX9_PCI_OPT_CLK_66)
tx4938_pciclk66_setup();
mdelay(10);
/* clear PCIC reset */
txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST);
writeb(0, rbtx4927_pcireset_addr);
iob();
tx4938_report_pciclk();
tx4927_pcic_setup(tx4938_pcicptr, c, extarb);
if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) ==
TXX9_PCI_OPT_CLK_AUTO &&
txx9_pci66_check(c, 0, 0)) {
/* Reset PCI Bus */
writeb(1, rbtx4927_pcireset_addr);
/* Reset PCIC */
txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST);
tx4938_pciclk66_setup();
mdelay(10);
/* clear PCIC reset */
txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST);
writeb(0, rbtx4927_pcireset_addr);
iob();
/* Reinitialize PCIC */
tx4938_report_pciclk();
tx4927_pcic_setup(tx4938_pcicptr, c, extarb);
}
tx4938_setup_pcierr_irq();
}
static void __init rbtx4927_arch_init(void)
{
tx4927_pci_setup();
}
static void __init rbtx4937_arch_init(void)
{
tx4937_pci_setup();
}
#else
#define rbtx4927_arch_init NULL
#define rbtx4937_arch_init NULL
#endif /* CONFIG_PCI */
static void toshiba_rbtx4927_restart(char *command)
{
/* enable the s/w reset register */
writeb(1, rbtx4927_softresetlock_addr);
/* wait for enable to be seen */
while (!(readb(rbtx4927_softresetlock_addr) & 1))
;
/* do a s/w reset */
writeb(1, rbtx4927_softreset_addr);
/* fallback */
(*_machine_halt)();
}
static void __init rbtx4927_clock_init(void);
static void __init rbtx4937_clock_init(void);
static void __init rbtx4927_mem_setup(void)
{
char *argptr;
if (TX4927_REV_PCODE() == 0x4927) {
rbtx4927_clock_init();
tx4927_setup();
} else {
rbtx4937_clock_init();
tx4938_setup();
}
_machine_restart = toshiba_rbtx4927_restart;
#ifdef CONFIG_PCI
txx9_alloc_pci_controller(&txx9_primary_pcic,
RBTX4927_PCIMEM, RBTX4927_PCIMEM_SIZE,
RBTX4927_PCIIO, RBTX4927_PCIIO_SIZE);
txx9_board_pcibios_setup = tx4927_pcibios_setup;
#else
set_io_port_base(KSEG1 + RBTX4927_ISA_IO_OFFSET);
#endif
/* TX4927-SIO DTR on (PIO[15]) */
gpio_request(15, "sio-dtr");
gpio_direction_output(15, 1);
tx4927_sio_init(0, 0);
#ifdef CONFIG_SERIAL_TXX9_CONSOLE
argptr = prom_getcmdline();
if (!strstr(argptr, "console="))
strcat(argptr, " console=ttyS0,38400");
#endif
}
static void __init rbtx4927_clock_init(void)
{
/*
* ASSUMPTION: PCIDIVMODE is configured for PCI 33MHz or 66MHz.
*
* For TX4927:
* PCIDIVMODE[12:11]'s initial value is given by S9[4:3] (ON:0, OFF:1).
* CPU 166MHz: PCI 66MHz : PCIDIVMODE: 00 (1/2.5)
* CPU 200MHz: PCI 66MHz : PCIDIVMODE: 01 (1/3)
* CPU 166MHz: PCI 33MHz : PCIDIVMODE: 10 (1/5)
* CPU 200MHz: PCI 33MHz : PCIDIVMODE: 11 (1/6)
* i.e. S9[3]: ON (83MHz), OFF (100MHz)
*/
switch ((unsigned long)__raw_readq(&tx4927_ccfgptr->ccfg) &
TX4927_CCFG_PCIDIVMODE_MASK) {
case TX4927_CCFG_PCIDIVMODE_2_5:
case TX4927_CCFG_PCIDIVMODE_5:
txx9_cpu_clock = 166666666; /* 166MHz */
break;
default:
txx9_cpu_clock = 200000000; /* 200MHz */
}
}
static void __init rbtx4937_clock_init(void)
{
/*
* ASSUMPTION: PCIDIVMODE is configured for PCI 33MHz or 66MHz.
*
* For TX4937:
* PCIDIVMODE[12:11]'s initial value is given by S1[5:4] (ON:0, OFF:1)
* PCIDIVMODE[10] is 0.
* CPU 266MHz: PCI 33MHz : PCIDIVMODE: 000 (1/8)
* CPU 266MHz: PCI 66MHz : PCIDIVMODE: 001 (1/4)
* CPU 300MHz: PCI 33MHz : PCIDIVMODE: 010 (1/9)
* CPU 300MHz: PCI 66MHz : PCIDIVMODE: 011 (1/4.5)
* CPU 333MHz: PCI 33MHz : PCIDIVMODE: 100 (1/10)
* CPU 333MHz: PCI 66MHz : PCIDIVMODE: 101 (1/5)
*/
switch ((unsigned long)__raw_readq(&tx4938_ccfgptr->ccfg) &
TX4938_CCFG_PCIDIVMODE_MASK) {
case TX4938_CCFG_PCIDIVMODE_8:
case TX4938_CCFG_PCIDIVMODE_4:
txx9_cpu_clock = 266666666; /* 266MHz */
break;
case TX4938_CCFG_PCIDIVMODE_9:
case TX4938_CCFG_PCIDIVMODE_4_5:
txx9_cpu_clock = 300000000; /* 300MHz */
break;
default:
txx9_cpu_clock = 333333333; /* 333MHz */
}
}
static void __init rbtx4927_time_init(void)
{
tx4927_time_init(0);
}
static void __init toshiba_rbtx4927_rtc_init(void)
{
struct resource res = {
.start = RBTX4927_BRAMRTC_BASE - IO_BASE,
.end = RBTX4927_BRAMRTC_BASE - IO_BASE + 0x800 - 1,
.flags = IORESOURCE_MEM,
};
platform_device_register_simple("rtc-ds1742", -1, &res, 1);
}
static void __init rbtx4927_ne_init(void)
{
struct resource res[] = {
{
.start = RBTX4927_RTL_8019_BASE,
.end = RBTX4927_RTL_8019_BASE + 0x20 - 1,
.flags = IORESOURCE_IO,
}, {
.start = RBTX4927_RTL_8019_IRQ,
.flags = IORESOURCE_IRQ,
}
};
platform_device_register_simple("ne", -1, res, ARRAY_SIZE(res));
}
static void __init rbtx4927_mtd_init(void)
{
int i;
for (i = 0; i < 2; i++)
tx4927_mtd_init(i);
}
static void __init rbtx4927_gpioled_init(void)
{
static struct gpio_led leds[] = {
{ .name = "gpioled:green:0", .gpio = 0, .active_low = 1, },
{ .name = "gpioled:green:1", .gpio = 1, .active_low = 1, },
};
static struct gpio_led_platform_data pdata = {
.num_leds = ARRAY_SIZE(leds),
.leds = leds,
};
struct platform_device *pdev = platform_device_alloc("leds-gpio", 0);
if (!pdev)
return;
pdev->dev.platform_data = &pdata;
if (platform_device_add(pdev))
platform_device_put(pdev);
}
static void __init rbtx4927_device_init(void)
{
toshiba_rbtx4927_rtc_init();
rbtx4927_ne_init();
tx4927_wdt_init();
rbtx4927_mtd_init();
txx9_iocled_init(RBTX4927_LED_ADDR - IO_BASE, -1, 3, 1, "green", NULL);
rbtx4927_gpioled_init();
}
struct txx9_board_vec rbtx4927_vec __initdata = {
.system = "Toshiba RBTX4927",
.prom_init = rbtx4927_prom_init,
.mem_setup = rbtx4927_mem_setup,
.irq_setup = rbtx4927_irq_setup,
.time_init = rbtx4927_time_init,
.device_init = rbtx4927_device_init,
.arch_init = rbtx4927_arch_init,
#ifdef CONFIG_PCI
.pci_map_irq = rbtx4927_pci_map_irq,
#endif
};
struct txx9_board_vec rbtx4937_vec __initdata = {
.system = "Toshiba RBTX4937",
.prom_init = rbtx4927_prom_init,
.mem_setup = rbtx4927_mem_setup,
.irq_setup = rbtx4927_irq_setup,
.time_init = rbtx4927_time_init,
.device_init = rbtx4927_device_init,
.arch_init = rbtx4937_arch_init,
#ifdef CONFIG_PCI
.pci_map_irq = rbtx4927_pci_map_irq,
#endif
};