6b08d07cac
This patch provides support for enabling blinking of LEDs when RX or TX errors are detected. Approach taken in this patch is similar to one for TX or RX data transmission indication (i.e. TRIGGER_NETDEV_TX/RX attribute). One can inspect transmission errors with: ip -s link show eth0 Example LED configuration: cd /sys/devices/platform/amba_pl@0/a001a000.leds/leds/ echo netdev > mode:blue/trigger && \ echo eth0 > mode:blue/device_name && \ echo 1 > mode:blue/tx_err Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20240710100651.4059887-1-lukma@denx.de Signed-off-by: Lee Jones <lee@kernel.org>
764 lines
21 KiB
C
764 lines
21 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
// Copyright 2017 Ben Whitten <ben.whitten@gmail.com>
|
|
// Copyright 2007 Oliver Jowett <oliver@opencloud.com>
|
|
//
|
|
// LED Kernel Netdev Trigger
|
|
//
|
|
// Toggles the LED to reflect the link and traffic state of a named net device
|
|
//
|
|
// Derived from ledtrig-timer.c which is:
|
|
// Copyright 2005-2006 Openedhand Ltd.
|
|
// Author: Richard Purdie <rpurdie@openedhand.com>
|
|
|
|
#include <linux/atomic.h>
|
|
#include <linux/ctype.h>
|
|
#include <linux/device.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/init.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/linkmode.h>
|
|
#include <linux/list.h>
|
|
#include <linux/module.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/rtnetlink.h>
|
|
#include <linux/timer.h>
|
|
#include "../leds.h"
|
|
|
|
#define NETDEV_LED_DEFAULT_INTERVAL 50
|
|
|
|
/*
|
|
* Configurable sysfs attributes:
|
|
*
|
|
* device_name - network device name to monitor
|
|
* interval - duration of LED blink, in milliseconds
|
|
* link - LED's normal state reflects whether the link is up
|
|
* (has carrier) or not
|
|
* tx - LED blinks on transmitted data
|
|
* rx - LED blinks on receive data
|
|
* tx_err - LED blinks on transmit error
|
|
* rx_err - LED blinks on receive error
|
|
*
|
|
* Note: If the user selects a mode that is not supported by hw, default
|
|
* behavior is to fall back to software control of the LED. However not every
|
|
* hw supports software control. LED callbacks brightness_set() and
|
|
* brightness_set_blocking() are NULL in this case. hw_control_is_supported()
|
|
* should use available means supported by hw to inform the user that selected
|
|
* mode isn't supported by hw. This could be switching off the LED or any
|
|
* hw blink mode. If software control fallback isn't possible, we return
|
|
* -EOPNOTSUPP to the user, but still store the selected mode. This is needed
|
|
* in case an intermediate unsupported mode is necessary to switch from one
|
|
* supported mode to another.
|
|
*/
|
|
|
|
struct led_netdev_data {
|
|
struct mutex lock;
|
|
|
|
struct delayed_work work;
|
|
struct notifier_block notifier;
|
|
|
|
struct led_classdev *led_cdev;
|
|
struct net_device *net_dev;
|
|
|
|
char device_name[IFNAMSIZ];
|
|
atomic_t interval;
|
|
unsigned int last_activity;
|
|
|
|
unsigned long mode;
|
|
int link_speed;
|
|
__ETHTOOL_DECLARE_LINK_MODE_MASK(supported_link_modes);
|
|
u8 duplex;
|
|
|
|
bool carrier_link_up;
|
|
bool hw_control;
|
|
};
|
|
|
|
static const struct attribute_group netdev_trig_link_speed_attrs_group;
|
|
|
|
static void set_baseline_state(struct led_netdev_data *trigger_data)
|
|
{
|
|
int current_brightness;
|
|
struct led_classdev *led_cdev = trigger_data->led_cdev;
|
|
|
|
/* Already validated, hw control is possible with the requested mode */
|
|
if (trigger_data->hw_control) {
|
|
led_cdev->hw_control_set(led_cdev, trigger_data->mode);
|
|
|
|
return;
|
|
}
|
|
|
|
current_brightness = led_cdev->brightness;
|
|
if (current_brightness)
|
|
led_cdev->blink_brightness = current_brightness;
|
|
if (!led_cdev->blink_brightness)
|
|
led_cdev->blink_brightness = led_cdev->max_brightness;
|
|
|
|
if (!trigger_data->carrier_link_up) {
|
|
led_set_brightness(led_cdev, LED_OFF);
|
|
} else {
|
|
bool blink_on = false;
|
|
|
|
if (test_bit(TRIGGER_NETDEV_LINK, &trigger_data->mode))
|
|
blink_on = true;
|
|
|
|
if (test_bit(TRIGGER_NETDEV_LINK_10, &trigger_data->mode) &&
|
|
trigger_data->link_speed == SPEED_10)
|
|
blink_on = true;
|
|
|
|
if (test_bit(TRIGGER_NETDEV_LINK_100, &trigger_data->mode) &&
|
|
trigger_data->link_speed == SPEED_100)
|
|
blink_on = true;
|
|
|
|
if (test_bit(TRIGGER_NETDEV_LINK_1000, &trigger_data->mode) &&
|
|
trigger_data->link_speed == SPEED_1000)
|
|
blink_on = true;
|
|
|
|
if (test_bit(TRIGGER_NETDEV_LINK_2500, &trigger_data->mode) &&
|
|
trigger_data->link_speed == SPEED_2500)
|
|
blink_on = true;
|
|
|
|
if (test_bit(TRIGGER_NETDEV_LINK_5000, &trigger_data->mode) &&
|
|
trigger_data->link_speed == SPEED_5000)
|
|
blink_on = true;
|
|
|
|
if (test_bit(TRIGGER_NETDEV_LINK_10000, &trigger_data->mode) &&
|
|
trigger_data->link_speed == SPEED_10000)
|
|
blink_on = true;
|
|
|
|
if (test_bit(TRIGGER_NETDEV_HALF_DUPLEX, &trigger_data->mode) &&
|
|
trigger_data->duplex == DUPLEX_HALF)
|
|
blink_on = true;
|
|
|
|
if (test_bit(TRIGGER_NETDEV_FULL_DUPLEX, &trigger_data->mode) &&
|
|
trigger_data->duplex == DUPLEX_FULL)
|
|
blink_on = true;
|
|
|
|
if (blink_on)
|
|
led_set_brightness(led_cdev,
|
|
led_cdev->blink_brightness);
|
|
else
|
|
led_set_brightness(led_cdev, LED_OFF);
|
|
|
|
/* If we are looking for RX/TX start periodically
|
|
* checking stats
|
|
*/
|
|
if (test_bit(TRIGGER_NETDEV_TX, &trigger_data->mode) ||
|
|
test_bit(TRIGGER_NETDEV_RX, &trigger_data->mode) ||
|
|
test_bit(TRIGGER_NETDEV_TX_ERR, &trigger_data->mode) ||
|
|
test_bit(TRIGGER_NETDEV_RX_ERR, &trigger_data->mode))
|
|
schedule_delayed_work(&trigger_data->work, 0);
|
|
}
|
|
}
|
|
|
|
static bool supports_hw_control(struct led_classdev *led_cdev)
|
|
{
|
|
if (!led_cdev->hw_control_get || !led_cdev->hw_control_set ||
|
|
!led_cdev->hw_control_is_supported)
|
|
return false;
|
|
|
|
return !strcmp(led_cdev->hw_control_trigger, led_cdev->trigger->name);
|
|
}
|
|
|
|
/*
|
|
* Validate the configured netdev is the same as the one associated with
|
|
* the LED driver in hw control.
|
|
*/
|
|
static bool validate_net_dev(struct led_classdev *led_cdev,
|
|
struct net_device *net_dev)
|
|
{
|
|
struct device *dev = led_cdev->hw_control_get_device(led_cdev);
|
|
struct net_device *ndev;
|
|
|
|
if (!dev)
|
|
return false;
|
|
|
|
ndev = to_net_dev(dev);
|
|
|
|
return ndev == net_dev;
|
|
}
|
|
|
|
static bool can_hw_control(struct led_netdev_data *trigger_data)
|
|
{
|
|
unsigned long default_interval = msecs_to_jiffies(NETDEV_LED_DEFAULT_INTERVAL);
|
|
unsigned int interval = atomic_read(&trigger_data->interval);
|
|
struct led_classdev *led_cdev = trigger_data->led_cdev;
|
|
int ret;
|
|
|
|
if (!supports_hw_control(led_cdev))
|
|
return false;
|
|
|
|
/*
|
|
* Interval must be set to the default
|
|
* value. Any different value is rejected if in hw
|
|
* control.
|
|
*/
|
|
if (interval != default_interval)
|
|
return false;
|
|
|
|
/*
|
|
* net_dev must be set with hw control, otherwise no
|
|
* blinking can be happening and there is nothing to
|
|
* offloaded. Additionally, for hw control to be
|
|
* valid, the configured netdev must be the same as
|
|
* netdev associated to the LED.
|
|
*/
|
|
if (!validate_net_dev(led_cdev, trigger_data->net_dev))
|
|
return false;
|
|
|
|
/* Check if the requested mode is supported */
|
|
ret = led_cdev->hw_control_is_supported(led_cdev, trigger_data->mode);
|
|
/* Fall back to software blinking if not supported */
|
|
if (ret == -EOPNOTSUPP)
|
|
return false;
|
|
if (ret) {
|
|
dev_warn(led_cdev->dev,
|
|
"Current mode check failed with error %d\n", ret);
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
static void get_device_state(struct led_netdev_data *trigger_data)
|
|
{
|
|
struct ethtool_link_ksettings cmd;
|
|
|
|
trigger_data->carrier_link_up = netif_carrier_ok(trigger_data->net_dev);
|
|
|
|
if (__ethtool_get_link_ksettings(trigger_data->net_dev, &cmd))
|
|
return;
|
|
|
|
if (trigger_data->carrier_link_up) {
|
|
trigger_data->link_speed = cmd.base.speed;
|
|
trigger_data->duplex = cmd.base.duplex;
|
|
}
|
|
|
|
/*
|
|
* Have a local copy of the link speed supported to avoid rtnl lock every time
|
|
* modes are refreshed on any change event
|
|
*/
|
|
linkmode_copy(trigger_data->supported_link_modes, cmd.link_modes.supported);
|
|
}
|
|
|
|
static ssize_t device_name_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
|
|
ssize_t len;
|
|
|
|
mutex_lock(&trigger_data->lock);
|
|
len = sprintf(buf, "%s\n", trigger_data->device_name);
|
|
mutex_unlock(&trigger_data->lock);
|
|
|
|
return len;
|
|
}
|
|
|
|
static int set_device_name(struct led_netdev_data *trigger_data,
|
|
const char *name, size_t size)
|
|
{
|
|
if (size >= IFNAMSIZ)
|
|
return -EINVAL;
|
|
|
|
cancel_delayed_work_sync(&trigger_data->work);
|
|
|
|
/*
|
|
* Take RTNL lock before trigger_data lock to prevent potential
|
|
* deadlock with netdev notifier registration.
|
|
*/
|
|
rtnl_lock();
|
|
mutex_lock(&trigger_data->lock);
|
|
|
|
if (trigger_data->net_dev) {
|
|
dev_put(trigger_data->net_dev);
|
|
trigger_data->net_dev = NULL;
|
|
}
|
|
|
|
memcpy(trigger_data->device_name, name, size);
|
|
trigger_data->device_name[size] = 0;
|
|
if (size > 0 && trigger_data->device_name[size - 1] == '\n')
|
|
trigger_data->device_name[size - 1] = 0;
|
|
|
|
if (trigger_data->device_name[0] != 0)
|
|
trigger_data->net_dev =
|
|
dev_get_by_name(&init_net, trigger_data->device_name);
|
|
|
|
trigger_data->carrier_link_up = false;
|
|
trigger_data->link_speed = SPEED_UNKNOWN;
|
|
trigger_data->duplex = DUPLEX_UNKNOWN;
|
|
if (trigger_data->net_dev)
|
|
get_device_state(trigger_data);
|
|
|
|
trigger_data->last_activity = 0;
|
|
|
|
/* Skip if we're called from netdev_trig_activate() and hw_control is true */
|
|
if (!trigger_data->hw_control || led_get_trigger_data(trigger_data->led_cdev))
|
|
set_baseline_state(trigger_data);
|
|
|
|
mutex_unlock(&trigger_data->lock);
|
|
rtnl_unlock();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t device_name_store(struct device *dev,
|
|
struct device_attribute *attr, const char *buf,
|
|
size_t size)
|
|
{
|
|
struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
|
|
int ret;
|
|
|
|
ret = set_device_name(trigger_data, buf, size);
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Refresh link_speed visibility */
|
|
sysfs_update_group(&dev->kobj, &netdev_trig_link_speed_attrs_group);
|
|
|
|
return size;
|
|
}
|
|
|
|
static DEVICE_ATTR_RW(device_name);
|
|
|
|
static ssize_t netdev_led_attr_show(struct device *dev, char *buf,
|
|
enum led_trigger_netdev_modes attr)
|
|
{
|
|
struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
|
|
int bit;
|
|
|
|
switch (attr) {
|
|
case TRIGGER_NETDEV_LINK:
|
|
case TRIGGER_NETDEV_LINK_10:
|
|
case TRIGGER_NETDEV_LINK_100:
|
|
case TRIGGER_NETDEV_LINK_1000:
|
|
case TRIGGER_NETDEV_LINK_2500:
|
|
case TRIGGER_NETDEV_LINK_5000:
|
|
case TRIGGER_NETDEV_LINK_10000:
|
|
case TRIGGER_NETDEV_HALF_DUPLEX:
|
|
case TRIGGER_NETDEV_FULL_DUPLEX:
|
|
case TRIGGER_NETDEV_TX:
|
|
case TRIGGER_NETDEV_RX:
|
|
case TRIGGER_NETDEV_TX_ERR:
|
|
case TRIGGER_NETDEV_RX_ERR:
|
|
bit = attr;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return sprintf(buf, "%u\n", test_bit(bit, &trigger_data->mode));
|
|
}
|
|
|
|
static ssize_t netdev_led_attr_store(struct device *dev, const char *buf,
|
|
size_t size, enum led_trigger_netdev_modes attr)
|
|
{
|
|
struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
|
|
struct led_classdev *led_cdev = trigger_data->led_cdev;
|
|
unsigned long state, mode = trigger_data->mode;
|
|
int ret;
|
|
int bit;
|
|
|
|
ret = kstrtoul(buf, 0, &state);
|
|
if (ret)
|
|
return ret;
|
|
|
|
switch (attr) {
|
|
case TRIGGER_NETDEV_LINK:
|
|
case TRIGGER_NETDEV_LINK_10:
|
|
case TRIGGER_NETDEV_LINK_100:
|
|
case TRIGGER_NETDEV_LINK_1000:
|
|
case TRIGGER_NETDEV_LINK_2500:
|
|
case TRIGGER_NETDEV_LINK_5000:
|
|
case TRIGGER_NETDEV_LINK_10000:
|
|
case TRIGGER_NETDEV_HALF_DUPLEX:
|
|
case TRIGGER_NETDEV_FULL_DUPLEX:
|
|
case TRIGGER_NETDEV_TX:
|
|
case TRIGGER_NETDEV_RX:
|
|
case TRIGGER_NETDEV_TX_ERR:
|
|
case TRIGGER_NETDEV_RX_ERR:
|
|
bit = attr;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (state)
|
|
set_bit(bit, &mode);
|
|
else
|
|
clear_bit(bit, &mode);
|
|
|
|
if (test_bit(TRIGGER_NETDEV_LINK, &mode) &&
|
|
(test_bit(TRIGGER_NETDEV_LINK_10, &mode) ||
|
|
test_bit(TRIGGER_NETDEV_LINK_100, &mode) ||
|
|
test_bit(TRIGGER_NETDEV_LINK_1000, &mode) ||
|
|
test_bit(TRIGGER_NETDEV_LINK_2500, &mode) ||
|
|
test_bit(TRIGGER_NETDEV_LINK_5000, &mode) ||
|
|
test_bit(TRIGGER_NETDEV_LINK_10000, &mode)))
|
|
return -EINVAL;
|
|
|
|
cancel_delayed_work_sync(&trigger_data->work);
|
|
|
|
trigger_data->mode = mode;
|
|
trigger_data->hw_control = can_hw_control(trigger_data);
|
|
|
|
if (!led_cdev->brightness_set && !led_cdev->brightness_set_blocking &&
|
|
!trigger_data->hw_control)
|
|
return -EOPNOTSUPP;
|
|
|
|
set_baseline_state(trigger_data);
|
|
|
|
return size;
|
|
}
|
|
|
|
#define DEFINE_NETDEV_TRIGGER(trigger_name, trigger) \
|
|
static ssize_t trigger_name##_show(struct device *dev, \
|
|
struct device_attribute *attr, char *buf) \
|
|
{ \
|
|
return netdev_led_attr_show(dev, buf, trigger); \
|
|
} \
|
|
static ssize_t trigger_name##_store(struct device *dev, \
|
|
struct device_attribute *attr, const char *buf, size_t size) \
|
|
{ \
|
|
return netdev_led_attr_store(dev, buf, size, trigger); \
|
|
} \
|
|
static DEVICE_ATTR_RW(trigger_name)
|
|
|
|
DEFINE_NETDEV_TRIGGER(link, TRIGGER_NETDEV_LINK);
|
|
DEFINE_NETDEV_TRIGGER(link_10, TRIGGER_NETDEV_LINK_10);
|
|
DEFINE_NETDEV_TRIGGER(link_100, TRIGGER_NETDEV_LINK_100);
|
|
DEFINE_NETDEV_TRIGGER(link_1000, TRIGGER_NETDEV_LINK_1000);
|
|
DEFINE_NETDEV_TRIGGER(link_2500, TRIGGER_NETDEV_LINK_2500);
|
|
DEFINE_NETDEV_TRIGGER(link_5000, TRIGGER_NETDEV_LINK_5000);
|
|
DEFINE_NETDEV_TRIGGER(link_10000, TRIGGER_NETDEV_LINK_10000);
|
|
DEFINE_NETDEV_TRIGGER(half_duplex, TRIGGER_NETDEV_HALF_DUPLEX);
|
|
DEFINE_NETDEV_TRIGGER(full_duplex, TRIGGER_NETDEV_FULL_DUPLEX);
|
|
DEFINE_NETDEV_TRIGGER(tx, TRIGGER_NETDEV_TX);
|
|
DEFINE_NETDEV_TRIGGER(rx, TRIGGER_NETDEV_RX);
|
|
DEFINE_NETDEV_TRIGGER(tx_err, TRIGGER_NETDEV_TX_ERR);
|
|
DEFINE_NETDEV_TRIGGER(rx_err, TRIGGER_NETDEV_RX_ERR);
|
|
|
|
static ssize_t interval_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
|
|
|
|
return sprintf(buf, "%u\n",
|
|
jiffies_to_msecs(atomic_read(&trigger_data->interval)));
|
|
}
|
|
|
|
static ssize_t interval_store(struct device *dev,
|
|
struct device_attribute *attr, const char *buf,
|
|
size_t size)
|
|
{
|
|
struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
|
|
unsigned long value;
|
|
int ret;
|
|
|
|
if (trigger_data->hw_control)
|
|
return -EINVAL;
|
|
|
|
ret = kstrtoul(buf, 0, &value);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* impose some basic bounds on the timer interval */
|
|
if (value >= 5 && value <= 10000) {
|
|
cancel_delayed_work_sync(&trigger_data->work);
|
|
|
|
atomic_set(&trigger_data->interval, msecs_to_jiffies(value));
|
|
set_baseline_state(trigger_data); /* resets timer */
|
|
}
|
|
|
|
return size;
|
|
}
|
|
|
|
static DEVICE_ATTR_RW(interval);
|
|
|
|
static ssize_t offloaded_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
|
|
|
|
return sprintf(buf, "%d\n", trigger_data->hw_control);
|
|
}
|
|
|
|
static DEVICE_ATTR_RO(offloaded);
|
|
|
|
#define CHECK_LINK_MODE_ATTR(link_speed) \
|
|
do { \
|
|
if (attr == &dev_attr_link_##link_speed.attr && \
|
|
link_ksettings.base.speed == SPEED_##link_speed) \
|
|
return attr->mode; \
|
|
} while (0)
|
|
|
|
static umode_t netdev_trig_link_speed_visible(struct kobject *kobj,
|
|
struct attribute *attr, int n)
|
|
{
|
|
struct device *dev = kobj_to_dev(kobj);
|
|
struct led_netdev_data *trigger_data;
|
|
unsigned long *supported_link_modes;
|
|
u32 mode;
|
|
|
|
trigger_data = led_trigger_get_drvdata(dev);
|
|
supported_link_modes = trigger_data->supported_link_modes;
|
|
|
|
/*
|
|
* Search in the supported link mode mask a matching supported mode.
|
|
* Stop at the first matching entry as we care only to check if a particular
|
|
* speed is supported and not the kind.
|
|
*/
|
|
for_each_set_bit(mode, supported_link_modes, __ETHTOOL_LINK_MODE_MASK_NBITS) {
|
|
struct ethtool_link_ksettings link_ksettings;
|
|
|
|
ethtool_params_from_link_mode(&link_ksettings, mode);
|
|
|
|
CHECK_LINK_MODE_ATTR(10);
|
|
CHECK_LINK_MODE_ATTR(100);
|
|
CHECK_LINK_MODE_ATTR(1000);
|
|
CHECK_LINK_MODE_ATTR(2500);
|
|
CHECK_LINK_MODE_ATTR(5000);
|
|
CHECK_LINK_MODE_ATTR(10000);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct attribute *netdev_trig_link_speed_attrs[] = {
|
|
&dev_attr_link_10.attr,
|
|
&dev_attr_link_100.attr,
|
|
&dev_attr_link_1000.attr,
|
|
&dev_attr_link_2500.attr,
|
|
&dev_attr_link_5000.attr,
|
|
&dev_attr_link_10000.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group netdev_trig_link_speed_attrs_group = {
|
|
.attrs = netdev_trig_link_speed_attrs,
|
|
.is_visible = netdev_trig_link_speed_visible,
|
|
};
|
|
|
|
static struct attribute *netdev_trig_attrs[] = {
|
|
&dev_attr_device_name.attr,
|
|
&dev_attr_link.attr,
|
|
&dev_attr_full_duplex.attr,
|
|
&dev_attr_half_duplex.attr,
|
|
&dev_attr_rx.attr,
|
|
&dev_attr_tx.attr,
|
|
&dev_attr_rx_err.attr,
|
|
&dev_attr_tx_err.attr,
|
|
&dev_attr_interval.attr,
|
|
&dev_attr_offloaded.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group netdev_trig_attrs_group = {
|
|
.attrs = netdev_trig_attrs,
|
|
};
|
|
|
|
static const struct attribute_group *netdev_trig_groups[] = {
|
|
&netdev_trig_attrs_group,
|
|
&netdev_trig_link_speed_attrs_group,
|
|
NULL,
|
|
};
|
|
|
|
static int netdev_trig_notify(struct notifier_block *nb,
|
|
unsigned long evt, void *dv)
|
|
{
|
|
struct net_device *dev =
|
|
netdev_notifier_info_to_dev((struct netdev_notifier_info *)dv);
|
|
struct led_netdev_data *trigger_data =
|
|
container_of(nb, struct led_netdev_data, notifier);
|
|
struct led_classdev *led_cdev = trigger_data->led_cdev;
|
|
|
|
if (evt != NETDEV_UP && evt != NETDEV_DOWN && evt != NETDEV_CHANGE
|
|
&& evt != NETDEV_REGISTER && evt != NETDEV_UNREGISTER
|
|
&& evt != NETDEV_CHANGENAME)
|
|
return NOTIFY_DONE;
|
|
|
|
if (!(dev == trigger_data->net_dev ||
|
|
(evt == NETDEV_CHANGENAME && !strcmp(dev->name, trigger_data->device_name)) ||
|
|
(evt == NETDEV_REGISTER && !strcmp(dev->name, trigger_data->device_name))))
|
|
return NOTIFY_DONE;
|
|
|
|
cancel_delayed_work_sync(&trigger_data->work);
|
|
|
|
mutex_lock(&trigger_data->lock);
|
|
|
|
trigger_data->carrier_link_up = false;
|
|
trigger_data->link_speed = SPEED_UNKNOWN;
|
|
trigger_data->duplex = DUPLEX_UNKNOWN;
|
|
switch (evt) {
|
|
case NETDEV_CHANGENAME:
|
|
case NETDEV_REGISTER:
|
|
dev_put(trigger_data->net_dev);
|
|
dev_hold(dev);
|
|
trigger_data->net_dev = dev;
|
|
if (evt == NETDEV_CHANGENAME)
|
|
get_device_state(trigger_data);
|
|
break;
|
|
case NETDEV_UNREGISTER:
|
|
dev_put(trigger_data->net_dev);
|
|
trigger_data->net_dev = NULL;
|
|
break;
|
|
case NETDEV_UP:
|
|
case NETDEV_CHANGE:
|
|
get_device_state(trigger_data);
|
|
/* Refresh link_speed visibility */
|
|
if (evt == NETDEV_CHANGE)
|
|
sysfs_update_group(&led_cdev->dev->kobj,
|
|
&netdev_trig_link_speed_attrs_group);
|
|
break;
|
|
}
|
|
|
|
set_baseline_state(trigger_data);
|
|
|
|
mutex_unlock(&trigger_data->lock);
|
|
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
/* here's the real work! */
|
|
static void netdev_trig_work(struct work_struct *work)
|
|
{
|
|
struct led_netdev_data *trigger_data =
|
|
container_of(work, struct led_netdev_data, work.work);
|
|
struct rtnl_link_stats64 *dev_stats;
|
|
unsigned int new_activity;
|
|
struct rtnl_link_stats64 temp;
|
|
unsigned long interval;
|
|
int invert;
|
|
|
|
/* If we dont have a device, insure we are off */
|
|
if (!trigger_data->net_dev) {
|
|
led_set_brightness(trigger_data->led_cdev, LED_OFF);
|
|
return;
|
|
}
|
|
|
|
/* If we are not looking for RX/TX then return */
|
|
if (!test_bit(TRIGGER_NETDEV_TX, &trigger_data->mode) &&
|
|
!test_bit(TRIGGER_NETDEV_RX, &trigger_data->mode) &&
|
|
!test_bit(TRIGGER_NETDEV_TX_ERR, &trigger_data->mode) &&
|
|
!test_bit(TRIGGER_NETDEV_RX_ERR, &trigger_data->mode))
|
|
return;
|
|
|
|
dev_stats = dev_get_stats(trigger_data->net_dev, &temp);
|
|
new_activity =
|
|
(test_bit(TRIGGER_NETDEV_TX, &trigger_data->mode) ?
|
|
dev_stats->tx_packets : 0) +
|
|
(test_bit(TRIGGER_NETDEV_RX, &trigger_data->mode) ?
|
|
dev_stats->rx_packets : 0) +
|
|
(test_bit(TRIGGER_NETDEV_TX_ERR, &trigger_data->mode) ?
|
|
dev_stats->tx_errors : 0) +
|
|
(test_bit(TRIGGER_NETDEV_RX_ERR, &trigger_data->mode) ?
|
|
dev_stats->rx_errors : 0);
|
|
|
|
if (trigger_data->last_activity != new_activity) {
|
|
led_stop_software_blink(trigger_data->led_cdev);
|
|
|
|
invert = test_bit(TRIGGER_NETDEV_LINK, &trigger_data->mode) ||
|
|
test_bit(TRIGGER_NETDEV_LINK_10, &trigger_data->mode) ||
|
|
test_bit(TRIGGER_NETDEV_LINK_100, &trigger_data->mode) ||
|
|
test_bit(TRIGGER_NETDEV_LINK_1000, &trigger_data->mode) ||
|
|
test_bit(TRIGGER_NETDEV_LINK_2500, &trigger_data->mode) ||
|
|
test_bit(TRIGGER_NETDEV_LINK_5000, &trigger_data->mode) ||
|
|
test_bit(TRIGGER_NETDEV_LINK_10000, &trigger_data->mode) ||
|
|
test_bit(TRIGGER_NETDEV_HALF_DUPLEX, &trigger_data->mode) ||
|
|
test_bit(TRIGGER_NETDEV_FULL_DUPLEX, &trigger_data->mode);
|
|
interval = jiffies_to_msecs(
|
|
atomic_read(&trigger_data->interval));
|
|
/* base state is ON (link present) */
|
|
led_blink_set_oneshot(trigger_data->led_cdev,
|
|
&interval,
|
|
&interval,
|
|
invert);
|
|
trigger_data->last_activity = new_activity;
|
|
}
|
|
|
|
schedule_delayed_work(&trigger_data->work,
|
|
(atomic_read(&trigger_data->interval)*2));
|
|
}
|
|
|
|
static int netdev_trig_activate(struct led_classdev *led_cdev)
|
|
{
|
|
struct led_netdev_data *trigger_data;
|
|
unsigned long mode = 0;
|
|
struct device *dev;
|
|
int rc;
|
|
|
|
trigger_data = kzalloc(sizeof(struct led_netdev_data), GFP_KERNEL);
|
|
if (!trigger_data)
|
|
return -ENOMEM;
|
|
|
|
mutex_init(&trigger_data->lock);
|
|
|
|
trigger_data->notifier.notifier_call = netdev_trig_notify;
|
|
trigger_data->notifier.priority = 10;
|
|
|
|
INIT_DELAYED_WORK(&trigger_data->work, netdev_trig_work);
|
|
|
|
trigger_data->led_cdev = led_cdev;
|
|
trigger_data->net_dev = NULL;
|
|
trigger_data->device_name[0] = 0;
|
|
|
|
trigger_data->mode = 0;
|
|
atomic_set(&trigger_data->interval, msecs_to_jiffies(NETDEV_LED_DEFAULT_INTERVAL));
|
|
trigger_data->last_activity = 0;
|
|
|
|
/* Check if hw control is active by default on the LED.
|
|
* Init already enabled mode in hw control.
|
|
*/
|
|
if (supports_hw_control(led_cdev)) {
|
|
dev = led_cdev->hw_control_get_device(led_cdev);
|
|
if (dev) {
|
|
const char *name = dev_name(dev);
|
|
|
|
trigger_data->hw_control = true;
|
|
set_device_name(trigger_data, name, strlen(name));
|
|
|
|
rc = led_cdev->hw_control_get(led_cdev, &mode);
|
|
if (!rc)
|
|
trigger_data->mode = mode;
|
|
}
|
|
}
|
|
|
|
led_set_trigger_data(led_cdev, trigger_data);
|
|
|
|
rc = register_netdevice_notifier(&trigger_data->notifier);
|
|
if (rc)
|
|
kfree(trigger_data);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void netdev_trig_deactivate(struct led_classdev *led_cdev)
|
|
{
|
|
struct led_netdev_data *trigger_data = led_get_trigger_data(led_cdev);
|
|
|
|
unregister_netdevice_notifier(&trigger_data->notifier);
|
|
|
|
cancel_delayed_work_sync(&trigger_data->work);
|
|
|
|
dev_put(trigger_data->net_dev);
|
|
|
|
kfree(trigger_data);
|
|
}
|
|
|
|
static struct led_trigger netdev_led_trigger = {
|
|
.name = "netdev",
|
|
.activate = netdev_trig_activate,
|
|
.deactivate = netdev_trig_deactivate,
|
|
.groups = netdev_trig_groups,
|
|
};
|
|
|
|
module_led_trigger(netdev_led_trigger);
|
|
|
|
MODULE_AUTHOR("Ben Whitten <ben.whitten@gmail.com>");
|
|
MODULE_AUTHOR("Oliver Jowett <oliver@opencloud.com>");
|
|
MODULE_DESCRIPTION("Netdev LED trigger");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("ledtrig:netdev");
|