linux/arch/x86/kernel/setup.c

// SPDX-License-Identifier: GPL-2.0-only
/*
 *  Copyright (C) 1995  Linus Torvalds
 *
 * This file contains the setup_arch() code, which handles the architecture-dependent
 * parts of early kernel initialization.
 */
#include <linux/acpi.h>
#include <linux/console.h>
#include <linux/cpu.h>
#include <linux/crash_dump.h>
#include <linux/dma-map-ops.h>
#include <linux/efi.h>
#include <linux/ima.h>
#include <linux/init_ohci1394_dma.h>
#include <linux/initrd.h>
#include <linux/iscsi_ibft.h>
#include <linux/memblock.h>
#include <linux/panic_notifier.h>
#include <linux/pci.h>
#include <linux/root_dev.h>
#include <linux/hugetlb.h>
#include <linux/tboot.h>
#include <linux/usb/xhci-dbgp.h>
#include <linux/static_call.h>
#include <linux/swiotlb.h>
#include <linux/random.h>

#include <uapi/linux/mount.h>

#include <xen/xen.h>

#include <asm/apic.h>
#include <asm/efi.h>
#include <asm/numa.h>
#include <asm/bios_ebda.h>
#include <asm/bugs.h>
#include <asm/cacheinfo.h>
#include <asm/coco.h>
#include <asm/cpu.h>
#include <asm/efi.h>
#include <asm/gart.h>
#include <asm/hypervisor.h>
#include <asm/io_apic.h>
#include <asm/kasan.h>
#include <asm/kaslr.h>
#include <asm/mce.h>
#include <asm/memtype.h>
#include <asm/mtrr.h>
#include <asm/realmode.h>
#include <asm/olpc_ofw.h>
#include <asm/pci-direct.h>
#include <asm/prom.h>
#include <asm/proto.h>
#include <asm/thermal.h>
#include <asm/unwind.h>
#include <asm/vsyscall.h>
#include <linux/vmalloc.h>

/*
 * max_low_pfn_mapped: highest directly mapped pfn < 4 GB
 * max_pfn_mapped:     highest directly mapped pfn > 4 GB
 *
 * The direct mapping only covers E820_TYPE_RAM regions, so the ranges and gaps are
 * represented by pfn_mapped[].
 */
unsigned long max_low_pfn_mapped;
unsigned long max_pfn_mapped;

#ifdef CONFIG_DMI
RESERVE_BRK(dmi_alloc, 65536);
#endif


unsigned long _brk_start = (unsigned long)__brk_base;
unsigned long _brk_end   = (unsigned long)__brk_base;

struct boot_params boot_params;

/*
 * These are the four main kernel memory regions, we put them into
 * the resource tree so that kdump tools and other debugging tools
 * recover it:
 */

static struct resource rodata_resource = {
	.name	= "Kernel rodata",
	.start	= 0,
	.end	= 0,
	.flags	= IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM
};

static struct resource data_resource = {
	.name	= "Kernel data",
	.start	= 0,
	.end	= 0,
	.flags	= IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM
};

static struct resource code_resource = {
	.name	= "Kernel code",
	.start	= 0,
	.end	= 0,
	.flags	= IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM
};

static struct resource bss_resource = {
	.name	= "Kernel bss",
	.start	= 0,
	.end	= 0,
	.flags	= IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM
};


#ifdef CONFIG_X86_32
/* CPU data as detected by the assembly code in head_32.S */
struct cpuinfo_x86 new_cpu_data;

struct apm_info apm_info;
EXPORT_SYMBOL(apm_info);

#if defined(CONFIG_X86_SPEEDSTEP_SMI) || \
	defined(CONFIG_X86_SPEEDSTEP_SMI_MODULE)
struct ist_info ist_info;
EXPORT_SYMBOL(ist_info);
#else
struct ist_info ist_info;
#endif

#endif

struct cpuinfo_x86 boot_cpu_data __read_mostly;
EXPORT_SYMBOL(boot_cpu_data);

#if !defined(CONFIG_X86_PAE) || defined(CONFIG_X86_64)
__visible unsigned long mmu_cr4_features __ro_after_init;
#else
__visible unsigned long mmu_cr4_features __ro_after_init = X86_CR4_PAE;
#endif

#ifdef CONFIG_IMA
static phys_addr_t ima_kexec_buffer_phys;
static size_t ima_kexec_buffer_size;
#endif

/* Boot loader ID and version as integers, for the benefit of proc_dointvec */
int bootloader_type, bootloader_version;

/*
 * Setup options
 */
struct screen_info screen_info;
EXPORT_SYMBOL(screen_info);
struct edid_info edid_info;
EXPORT_SYMBOL_GPL(edid_info);

extern int root_mountflags;

unsigned long saved_video_mode;

#define RAMDISK_IMAGE_START_MASK	0x07FF
#define RAMDISK_PROMPT_FLAG		0x8000
#define RAMDISK_LOAD_FLAG		0x4000

static char __initdata command_line[COMMAND_LINE_SIZE];
#ifdef CONFIG_CMDLINE_BOOL
char builtin_cmdline[COMMAND_LINE_SIZE] = CONFIG_CMDLINE;
bool builtin_cmdline_added __ro_after_init;
#endif

#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
struct edd edd;
#ifdef CONFIG_EDD_MODULE
EXPORT_SYMBOL(edd);
#endif
/**
 * copy_edd() - Copy the BIOS EDD information
 *              from boot_params into a safe place.
 *
 */
static inline void __init copy_edd(void)
{
     memcpy(edd.mbr_signature, boot_params.edd_mbr_sig_buffer,
	    sizeof(edd.mbr_signature));
     memcpy(edd.edd_info, boot_params.eddbuf, sizeof(edd.edd_info));
     edd.mbr_signature_nr = boot_params.edd_mbr_sig_buf_entries;
     edd.edd_info_nr = boot_params.eddbuf_entries;
}
#else
static inline void __init copy_edd(void)
{
}
#endif

void * __init extend_brk(size_t size, size_t align)
{
	size_t mask = align - 1;
	void *ret;

	BUG_ON(_brk_start == 0);
	BUG_ON(align & mask);

	_brk_end = (_brk_end + mask) & ~mask;
	BUG_ON((char *)(_brk_end + size) > __brk_limit);

	ret = (void *)_brk_end;
	_brk_end += size;

	memset(ret, 0, size);

	return ret;
}

#ifdef CONFIG_X86_32
static void __init cleanup_highmap(void)
{
}
#endif

static void __init reserve_brk(void)
{
	if (_brk_end > _brk_start)
		memblock_reserve(__pa_symbol(_brk_start),
				 _brk_end - _brk_start);

	/* Mark brk area as locked down and no longer taking any
	   new allocations */
	_brk_start = 0;
}

#ifdef CONFIG_BLK_DEV_INITRD

static u64 __init get_ramdisk_image(void)
{
	u64 ramdisk_image = boot_params.hdr.ramdisk_image;

	ramdisk_image |= (u64)boot_params.ext_ramdisk_image << 32;

	if (ramdisk_image == 0)
		ramdisk_image = phys_initrd_start;

	return ramdisk_image;
}
static u64 __init get_ramdisk_size(void)
{
	u64 ramdisk_size = boot_params.hdr.ramdisk_size;

	ramdisk_size |= (u64)boot_params.ext_ramdisk_size << 32;

	if (ramdisk_size == 0)
		ramdisk_size = phys_initrd_size;

	return ramdisk_size;
}

static void __init relocate_initrd(void)
{
	/* Assume only end is not page aligned */
	u64 ramdisk_image = get_ramdisk_image();
	u64 ramdisk_size  = get_ramdisk_size();
	u64 area_size     = PAGE_ALIGN(ramdisk_size);

	/* We need to move the initrd down into directly mapped mem */
	u64 relocated_ramdisk = memblock_phys_alloc_range(area_size, PAGE_SIZE, 0,
						      PFN_PHYS(max_pfn_mapped));
	if (!relocated_ramdisk)
		panic("Cannot find place for new RAMDISK of size %lld\n",
		      ramdisk_size);

	initrd_start = relocated_ramdisk + PAGE_OFFSET;
	initrd_end   = initrd_start + ramdisk_size;
	printk(KERN_INFO "Allocated new RAMDISK: [mem %#010llx-%#010llx]\n",
	       relocated_ramdisk, relocated_ramdisk + ramdisk_size - 1);

	copy_from_early_mem((void *)initrd_start, ramdisk_image, ramdisk_size);

	printk(KERN_INFO "Move RAMDISK from [mem %#010llx-%#010llx] to"
		" [mem %#010llx-%#010llx]\n",
		ramdisk_image, ramdisk_image + ramdisk_size - 1,
		relocated_ramdisk, relocated_ramdisk + ramdisk_size - 1);
}

static void __init early_reserve_initrd(void)
{
	/* Assume only end is not page aligned */
	u64 ramdisk_image = get_ramdisk_image();
	u64 ramdisk_size  = get_ramdisk_size();
	u64 ramdisk_end   = PAGE_ALIGN(ramdisk_image + ramdisk_size);

	if (!boot_params.hdr.type_of_loader ||
	    !ramdisk_image || !ramdisk_size)
		return;		/* No initrd provided by bootloader */

	memblock_reserve(ramdisk_image, ramdisk_end - ramdisk_image);
}

static void __init reserve_initrd(void)
{
	/* Assume only end is not page aligned */
	u64 ramdisk_image = get_ramdisk_image();
	u64 ramdisk_size  = get_ramdisk_size();
	u64 ramdisk_end   = PAGE_ALIGN(ramdisk_image + ramdisk_size);

	if (!boot_params.hdr.type_of_loader ||
	    !ramdisk_image || !ramdisk_size)
		return;		/* No initrd provided by bootloader */

	initrd_start = 0;

	printk(KERN_INFO "RAMDISK: [mem %#010llx-%#010llx]\n", ramdisk_image,
			ramdisk_end - 1);

	if (pfn_range_is_mapped(PFN_DOWN(ramdisk_image),
				PFN_DOWN(ramdisk_end))) {
		/* All are mapped, easy case */
		initrd_start = ramdisk_image + PAGE_OFFSET;
		initrd_end = initrd_start + ramdisk_size;
		return;
	}

	relocate_initrd();

	memblock_phys_free(ramdisk_image, ramdisk_end - ramdisk_image);
}

#else
static void __init early_reserve_initrd(void)
{
}
static void __init reserve_initrd(void)
{
}
#endif /* CONFIG_BLK_DEV_INITRD */

static void __init add_early_ima_buffer(u64 phys_addr)
{
#ifdef CONFIG_IMA
	struct ima_setup_data *data;

	data = early_memremap(phys_addr + sizeof(struct setup_data), sizeof(*data));
	if (!data) {
		pr_warn("setup: failed to memremap ima_setup_data entry\n");
		return;
	}

	if (data->size) {
		memblock_reserve(data->addr, data->size);
		ima_kexec_buffer_phys = data->addr;
		ima_kexec_buffer_size = data->size;
	}

	early_memunmap(data, sizeof(*data));
#else
	pr_warn("Passed IMA kexec data, but CONFIG_IMA not set. Ignoring.\n");
#endif
}

#if defined(CONFIG_HAVE_IMA_KEXEC) && !defined(CONFIG_OF_FLATTREE)
int __init ima_free_kexec_buffer(void)
{
	if (!ima_kexec_buffer_size)
		return -ENOENT;

	memblock_free_late(ima_kexec_buffer_phys,
			   ima_kexec_buffer_size);

	ima_kexec_buffer_phys = 0;
	ima_kexec_buffer_size = 0;

	return 0;
}

int __init ima_get_kexec_buffer(void **addr, size_t *size)
{
	if (!ima_kexec_buffer_size)
		return -ENOENT;

	*addr = __va(ima_kexec_buffer_phys);
	*size = ima_kexec_buffer_size;

	return 0;
}
#endif

static void __init parse_setup_data(void)
{
	struct setup_data *data;
	u64 pa_data, pa_next;

	pa_data = boot_params.hdr.setup_data;
	while (pa_data) {
		u32 data_len, data_type;

		data = early_memremap(pa_data, sizeof(*data));
		data_len = data->len + sizeof(struct setup_data);
		data_type = data->type;
		pa_next = data->next;
		early_memunmap(data, sizeof(*data));

		switch (data_type) {
		case SETUP_E820_EXT:
			e820__memory_setup_extended(pa_data, data_len);
			break;
		case SETUP_DTB:
			add_dtb(pa_data);
			break;
		case SETUP_EFI:
			parse_efi_setup(pa_data, data_len);
			break;
		case SETUP_IMA:
			add_early_ima_buffer(pa_data);
			break;
		case SETUP_RNG_SEED:
			data = early_memremap(pa_data, data_len);
			add_bootloader_randomness(data->data, data->len);
			/* Zero seed for forward secrecy. */
			memzero_explicit(data->data, data->len);
			/* Zero length in case we find ourselves back here by accident. */
			memzero_explicit(&data->len, sizeof(data->len));
			early_memunmap(data, data_len);
			break;
		default:
			break;
		}
		pa_data = pa_next;
	}
}

static void __init memblock_x86_reserve_range_setup_data(void)
{
	struct setup_indirect *indirect;
	struct setup_data *data;
	u64 pa_data, pa_next;
	u32 len;

	pa_data = boot_params.hdr.setup_data;
	while (pa_data) {
		data = early_memremap(pa_data, sizeof(*data));
		if (!data) {
			pr_warn("setup: failed to memremap setup_data entry\n");
			return;
		}

		len = sizeof(*data);
		pa_next = data->next;

		memblock_reserve(pa_data, sizeof(*data) + data->len);

		if (data->type == SETUP_INDIRECT) {
			len += data->len;
			early_memunmap(data, sizeof(*data));
			data = early_memremap(pa_data, len);
			if (!data) {
				pr_warn("setup: failed to memremap indirect setup_data\n");
				return;
			}

			indirect = (struct setup_indirect *)data->data;

			if (indirect->type != SETUP_INDIRECT)
				memblock_reserve(indirect->addr, indirect->len);
		}

		pa_data = pa_next;
		early_memunmap(data, len);
	}
}

static void __init arch_reserve_crashkernel(void)
{
	unsigned long long crash_base, crash_size, low_size = 0;
	char *cmdline = boot_command_line;
	bool high = false;
	int ret;

	if (!IS_ENABLED(CONFIG_CRASH_RESERVE))
		return;

	ret = parse_crashkernel(cmdline, memblock_phys_mem_size(),
				&crash_size, &crash_base,
				&low_size, &high);
	if (ret)
		return;

	if (xen_pv_domain()) {
		pr_info("Ignoring crashkernel for a Xen PV domain\n");
		return;
	}

	reserve_crashkernel_generic(cmdline, crash_size, crash_base,
				    low_size, high);
}

static struct resource standard_io_resources[] = {
	{ .name = "dma1", .start = 0x00, .end = 0x1f,
		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
	{ .name = "pic1", .start = 0x20, .end = 0x21,
		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
	{ .name = "timer0", .start = 0x40, .end = 0x43,
		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
	{ .name = "timer1", .start = 0x50, .end = 0x53,
		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
	{ .name = "keyboard", .start = 0x60, .end = 0x60,
		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
	{ .name = "keyboard", .start = 0x64, .end = 0x64,
		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
	{ .name = "dma page reg", .start = 0x80, .end = 0x8f,
		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
	{ .name = "pic2", .start = 0xa0, .end = 0xa1,
		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
	{ .name = "dma2", .start = 0xc0, .end = 0xdf,
		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
	{ .name = "fpu", .start = 0xf0, .end = 0xff,
		.flags = IORESOURCE_BUSY | IORESOURCE_IO }
};

void __init reserve_standard_io_resources(void)
{
	int i;

	/* request I/O space for devices used on all i[345]86 PCs */
	for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++)
		request_resource(&ioport_resource, &standard_io_resources[i]);

}

static bool __init snb_gfx_workaround_needed(void)
{
#ifdef CONFIG_PCI
	int i;
	u16 vendor, devid;
	static const __initconst u16 snb_ids[] = {
		0x0102,
		0x0112,
		0x0122,
		0x0106,
		0x0116,
		0x0126,
		0x010a,
	};

	/* Assume no if something weird is going on with PCI */
	if (!early_pci_allowed())
		return false;

	vendor = read_pci_config_16(0, 2, 0, PCI_VENDOR_ID);
	if (vendor != 0x8086)
		return false;

	devid = read_pci_config_16(0, 2, 0, PCI_DEVICE_ID);
	for (i = 0; i < ARRAY_SIZE(snb_ids); i++)
		if (devid == snb_ids[i])
			return true;
#endif

	return false;
}

/*
 * Sandy Bridge graphics has trouble with certain ranges, exclude
 * them from allocation.
 */
static void __init trim_snb_memory(void)
{
	static const __initconst unsigned long bad_pages[] = {
		0x20050000,
		0x20110000,
		0x20130000,
		0x20138000,
		0x40004000,
	};
	int i;

	if (!snb_gfx_workaround_needed())
		return;

	printk(KERN_DEBUG "reserving inaccessible SNB gfx pages\n");

	/*
	 * SandyBridge integrated graphics devices have a bug that prevents
	 * them from accessing certain memory ranges, namely anything below
	 * 1M and in the pages listed in bad_pages[] above.
	 *
	 * To avoid these pages being ever accessed by SNB gfx devices reserve
	 * bad_pages that have not already been reserved at boot time.
	 * All memory below the 1 MB mark is anyway reserved later during
	 * setup_arch(), so there is no need to reserve it here.
	 */

	for (i = 0; i < ARRAY_SIZE(bad_pages); i++) {
		if (memblock_reserve(bad_pages[i], PAGE_SIZE))
			printk(KERN_WARNING "failed to reserve 0x%08lx\n",
			       bad_pages[i]);
	}
}

static void __init trim_bios_range(void)
{
	/*
	 * A special case is the first 4Kb of memory;
	 * This is a BIOS owned area, not kernel ram, but generally
	 * not listed as such in the E820 table.
	 *
	 * This typically reserves additional memory (64KiB by default)
	 * since some BIOSes are known to corrupt low memory.  See the
	 * Kconfig help text for X86_RESERVE_LOW.
	 */
	e820__range_update(0, PAGE_SIZE, E820_TYPE_RAM, E820_TYPE_RESERVED);

	/*
	 * special case: Some BIOSes report the PC BIOS
	 * area (640Kb -> 1Mb) as RAM even though it is not.
	 * take them out.
	 */
	e820__range_remove(BIOS_BEGIN, BIOS_END - BIOS_BEGIN, E820_TYPE_RAM, 1);

	e820__update_table(e820_table);
}

/* called before trim_bios_range() to spare extra sanitize */
static void __init e820_add_kernel_range(void)
{
	u64 start = __pa_symbol(_text);
	u64 size = __pa_symbol(_end) - start;

	/*
	 * Complain if .text .data and .bss are not marked as E820_TYPE_RAM and
	 * attempt to fix it by adding the range. We may have a confused BIOS,
	 * or the user may have used memmap=exactmap or memmap=xxM$yyM to
	 * exclude kernel range. If we really are running on top non-RAM,
	 * we will crash later anyways.
	 */
	if (e820__mapped_all(start, start + size, E820_TYPE_RAM))
		return;

	pr_warn(".text .data .bss are not marked as E820_TYPE_RAM!\n");
	e820__range_remove(start, size, E820_TYPE_RAM, 0);
	e820__range_add(start, size, E820_TYPE_RAM);
}

static void __init early_reserve_memory(void)
{
	/*
	 * Reserve the memory occupied by the kernel between _text and
	 * __end_of_kernel_reserve symbols. Any kernel sections after the
	 * __end_of_kernel_reserve symbol must be explicitly reserved with a
	 * separate memblock_reserve() or they will be discarded.
	 */
	memblock_reserve(__pa_symbol(_text),
			 (unsigned long)__end_of_kernel_reserve - (unsigned long)_text);

	/*
	 * The first 4Kb of memory is a BIOS owned area, but generally it is
	 * not listed as such in the E820 table.
	 *
	 * Reserve the first 64K of memory since some BIOSes are known to
	 * corrupt low memory. After the real mode trampoline is allocated the
	 * rest of the memory below 640k is reserved.
	 *
	 * In addition, make sure page 0 is always reserved because on
	 * systems with L1TF its contents can be leaked to user processes.
	 */
	memblock_reserve(0, SZ_64K);

	early_reserve_initrd();

	memblock_x86_reserve_range_setup_data();

	reserve_bios_regions();
	trim_snb_memory();
}

/*
 * Dump out kernel offset information on panic.
 */
static int
dump_kernel_offset(struct notifier_block *self, unsigned long v, void *p)
{
	if (kaslr_enabled()) {
		pr_emerg("Kernel Offset: 0x%lx from 0x%lx (relocation range: 0x%lx-0x%lx)\n",
			 kaslr_offset(),
			 __START_KERNEL,
			 __START_KERNEL_map,
			 MODULES_VADDR-1);
	} else {
		pr_emerg("Kernel Offset: disabled\n");
	}

	return 0;
}

void x86_configure_nx(void)
{
	if (boot_cpu_has(X86_FEATURE_NX))
		__supported_pte_mask |= _PAGE_NX;
	else
		__supported_pte_mask &= ~_PAGE_NX;
}

static void __init x86_report_nx(void)
{
	if (!boot_cpu_has(X86_FEATURE_NX)) {
		printk(KERN_NOTICE "Notice: NX (Execute Disable) protection "
		       "missing in CPU!\n");
	} else {
#if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
		printk(KERN_INFO "NX (Execute Disable) protection: active\n");
#else
		/* 32bit non-PAE kernel, NX cannot be used */
		printk(KERN_NOTICE "Notice: NX (Execute Disable) protection "
		       "cannot be enabled: non-PAE kernel!\n");
#endif
	}
}

/*
 * Determine if we were loaded by an EFI loader.  If so, then we have also been
 * passed the efi memmap, systab, etc., so we should use these data structures
 * for initialization.  Note, the efi init code path is determined by the
 * global efi_enabled. This allows the same kernel image to be used on existing
 * systems (with a traditional BIOS) as well as on EFI systems.
 */
/*
 * setup_arch - architecture-specific boot-time initializations
 *
 * Note: On x86_64, fixmaps are ready for use even before this is called.
 */

void __init setup_arch(char **cmdline_p)
{
#ifdef CONFIG_X86_32
	memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data));

	/*
	 * copy kernel address range established so far and switch
	 * to the proper swapper page table
	 */
	clone_pgd_range(swapper_pg_dir     + KERNEL_PGD_BOUNDARY,
			initial_page_table + KERNEL_PGD_BOUNDARY,
			KERNEL_PGD_PTRS);

	load_cr3(swapper_pg_dir);
	/*
	 * Note: Quark X1000 CPUs advertise PGE incorrectly and require
	 * a cr3 based tlb flush, so the following __flush_tlb_all()
	 * will not flush anything because the CPU quirk which clears
	 * X86_FEATURE_PGE has not been invoked yet. Though due to the
	 * load_cr3() above the TLB has been flushed already. The
	 * quirk is invoked before subsequent calls to __flush_tlb_all()
	 * so proper operation is guaranteed.
	 */
	__flush_tlb_all();
#else
	printk(KERN_INFO "Command line: %s\n", boot_command_line);
	boot_cpu_data.x86_phys_bits = MAX_PHYSMEM_BITS;
#endif

#ifdef CONFIG_CMDLINE_BOOL
#ifdef CONFIG_CMDLINE_OVERRIDE
	strscpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
#else
	if (builtin_cmdline[0]) {
		/* append boot loader cmdline to builtin */
		strlcat(builtin_cmdline, " ", COMMAND_LINE_SIZE);
		strlcat(builtin_cmdline, boot_command_line, COMMAND_LINE_SIZE);
		strscpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
	}
#endif
	builtin_cmdline_added = true;
#endif

	strscpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
	*cmdline_p = command_line;

	/*
	 * If we have OLPC OFW, we might end up relocating the fixmap due to
	 * reserve_top(), so do this before touching the ioremap area.
	 */
	olpc_ofw_detect();

	idt_setup_early_traps();
	early_cpu_init();
	jump_label_init();
	static_call_init();
	early_ioremap_init();

	setup_olpc_ofw_pgd();

	ROOT_DEV = old_decode_dev(boot_params.hdr.root_dev);
	screen_info = boot_params.screen_info;
	edid_info = boot_params.edid_info;
#ifdef CONFIG_X86_32
	apm_info.bios = boot_params.apm_bios_info;
	ist_info = boot_params.ist_info;
#endif
	saved_video_mode = boot_params.hdr.vid_mode;
	bootloader_type = boot_params.hdr.type_of_loader;
	if ((bootloader_type >> 4) == 0xe) {
		bootloader_type &= 0xf;
		bootloader_type |= (boot_params.hdr.ext_loader_type+0x10) << 4;
	}
	bootloader_version  = bootloader_type & 0xf;
	bootloader_version |= boot_params.hdr.ext_loader_ver << 4;

#ifdef CONFIG_BLK_DEV_RAM
	rd_image_start = boot_params.hdr.ram_size & RAMDISK_IMAGE_START_MASK;
#endif
#ifdef CONFIG_EFI
	if (!strncmp((char *)&boot_params.efi_info.efi_loader_signature,
		     EFI32_LOADER_SIGNATURE, 4)) {
		set_bit(EFI_BOOT, &efi.flags);
	} else if (!strncmp((char *)&boot_params.efi_info.efi_loader_signature,
		     EFI64_LOADER_SIGNATURE, 4)) {
		set_bit(EFI_BOOT, &efi.flags);
		set_bit(EFI_64BIT, &efi.flags);
	}
#endif

	x86_init.oem.arch_setup();

	/*
	 * Do some memory reservations *before* memory is added to memblock, so
	 * memblock allocations won't overwrite it.
	 *
	 * After this point, everything still needed from the boot loader or
	 * firmware or kernel text should be early reserved or marked not RAM in
	 * e820. All other memory is free game.
	 *
	 * This call needs to happen before e820__memory_setup() which calls the
	 * xen_memory_setup() on Xen dom0 which relies on the fact that those
	 * early reservations have happened already.
	 */
	early_reserve_memory();

	iomem_resource.end = (1ULL << boot_cpu_data.x86_phys_bits) - 1;
	e820__memory_setup();
	parse_setup_data();

	copy_edd();

	if (!boot_params.hdr.root_flags)
		root_mountflags &= ~MS_RDONLY;
	setup_initial_init_mm(_text, _etext, _edata, (void *)_brk_end);

	code_resource.start = __pa_symbol(_text);
	code_resource.end = __pa_symbol(_etext)-1;
	rodata_resource.start = __pa_symbol(__start_rodata);
	rodata_resource.end = __pa_symbol(__end_rodata)-1;
	data_resource.start = __pa_symbol(_sdata);
	data_resource.end = __pa_symbol(_edata)-1;
	bss_resource.start = __pa_symbol(__bss_start);
	bss_resource.end = __pa_symbol(__bss_stop)-1;

	/*
	 * x86_configure_nx() is called before parse_early_param() to detect
	 * whether hardware doesn't support NX (so that the early EHCI debug
	 * console setup can safely call set_fixmap()).
	 */
	x86_configure_nx();

	parse_early_param();

	if (efi_enabled(EFI_BOOT))
		efi_memblock_x86_reserve_range();

#ifdef CONFIG_MEMORY_HOTPLUG
	/*
	 * Memory used by the kernel cannot be hot-removed because Linux
	 * cannot migrate the kernel pages. When memory hotplug is
	 * enabled, we should prevent memblock from allocating memory
	 * for the kernel.
	 *
	 * ACPI SRAT records all hotpluggable memory ranges. But before
	 * SRAT is parsed, we don't know about it.
	 *
	 * The kernel image is loaded into memory at very early time. We
	 * cannot prevent this anyway. So on NUMA system, we set any
	 * node the kernel resides in as un-hotpluggable.
	 *
	 * Since on modern servers, one node could have double-digit
	 * gigabytes memory, we can assume the memory around the kernel
	 * image is also un-hotpluggable. So before SRAT is parsed, just
	 * allocate memory near the kernel image to try the best to keep
	 * the kernel away from hotpluggable memory.
	 */
	if (movable_node_is_enabled())
		memblock_set_bottom_up(true);
#endif

	x86_report_nx();

	apic_setup_apic_calls();

	if (acpi_mps_check()) {
#ifdef CONFIG_X86_LOCAL_APIC
		apic_is_disabled = true;
#endif
		setup_clear_cpu_cap(X86_FEATURE_APIC);
	}

	e820__reserve_setup_data();
	e820__finish_early_params();

	if (efi_enabled(EFI_BOOT))
		efi_init();

	reserve_ibft_region();
	x86_init.resources.dmi_setup();

	/*
	 * VMware detection requires dmi to be available, so this
	 * needs to be done after dmi_setup(), for the boot CPU.
	 * For some guest types (Xen PV, SEV-SNP, TDX) it is required to be
	 * called before cache_bp_init() for setting up MTRR state.
	 */
	init_hypervisor_platform();

	tsc_early_init();
	x86_init.resources.probe_roms();

	/* after parse_early_param, so could debug it */
	insert_resource(&iomem_resource, &code_resource);
	insert_resource(&iomem_resource, &rodata_resource);
	insert_resource(&iomem_resource, &data_resource);
	insert_resource(&iomem_resource, &bss_resource);

	e820_add_kernel_range();
	trim_bios_range();
#ifdef CONFIG_X86_32
	if (ppro_with_ram_bug()) {
		e820__range_update(0x70000000ULL, 0x40000ULL, E820_TYPE_RAM,
				  E820_TYPE_RESERVED);
		e820__update_table(e820_table);
		printk(KERN_INFO "fixed physical RAM map:\n");
		e820__print_table("bad_ppro");
	}
#else
	early_gart_iommu_check();
#endif

	/*
	 * partially used pages are not usable - thus
	 * we are rounding upwards:
	 */
	max_pfn = e820__end_of_ram_pfn();

	/* update e820 for memory not covered by WB MTRRs */
	cache_bp_init();
	if (mtrr_trim_uncached_memory(max_pfn))
		max_pfn = e820__end_of_ram_pfn();

	max_possible_pfn = max_pfn;

	/*
	 * Define random base addresses for memory sections after max_pfn is
	 * defined and before each memory section base is used.
	 */
	kernel_randomize_memory();

#ifdef CONFIG_X86_32
	/* max_low_pfn get updated here */
	find_low_pfn_range();
#else
	check_x2apic();

	/* How many end-of-memory variables you have, grandma! */
	/* need this before calling reserve_initrd */
	if (max_pfn > (1UL<<(32 - PAGE_SHIFT)))
		max_low_pfn = e820__end_of_low_ram_pfn();
	else
		max_low_pfn = max_pfn;

	high_memory = (void *)__va(max_pfn * PAGE_SIZE - 1) + 1;
#endif

	/* Find and reserve MPTABLE area */
	x86_init.mpparse.find_mptable();

	early_alloc_pgt_buf();

	/*
	 * Need to conclude brk, before e820__memblock_setup()
	 * it could use memblock_find_in_range, could overlap with
	 * brk area.
	 */
	reserve_brk();

	cleanup_highmap();

	memblock_set_current_limit(ISA_END_ADDRESS);
	e820__memblock_setup();

	/*
	 * Needs to run after memblock setup because it needs the physical
	 * memory size.
	 */
	mem_encrypt_setup_arch();
	cc_random_init();

	efi_find_mirror();
	efi_esrt_init();
	efi_mokvar_table_init();

	/*
	 * The EFI specification says that boot service code won't be
	 * called after ExitBootServices(). This is, in fact, a lie.
	 */
	efi_reserve_boot_services();

	/* preallocate 4k for mptable mpc */
	e820__memblock_alloc_reserved_mpc_new();

#ifdef CONFIG_X86_CHECK_BIOS_CORRUPTION
	setup_bios_corruption_check();
#endif

#ifdef CONFIG_X86_32
	printk(KERN_DEBUG "initial memory mapped: [mem 0x00000000-%#010lx]\n",
			(max_pfn_mapped<<PAGE_SHIFT) - 1);
#endif

	/*
	 * Find free memory for the real mode trampoline and place it there. If
	 * there is not enough free memory under 1M, on EFI-enabled systems
	 * there will be additional attempt to reclaim the memory for the real
	 * mode trampoline at efi_free_boot_services().
	 *
	 * Unconditionally reserve the entire first 1M of RAM because BIOSes
	 * are known to corrupt low memory and several hundred kilobytes are not
	 * worth complex detection what memory gets clobbered. Windows does the
	 * same thing for very similar reasons.
	 *
	 * Moreover, on machines with SandyBridge graphics or in setups that use
	 * crashkernel the entire 1M is reserved anyway.
	 *
	 * Note the host kernel TDX also requires the first 1MB being reserved.
	 */
	x86_platform.realmode_reserve();

	init_mem_mapping();

	/*
	 * init_mem_mapping() relies on the early IDT page fault handling.
	 * Now either enable FRED or install the real page fault handler
	 * for 64-bit in the IDT.
	 */
	cpu_init_replace_early_idt();

	/*
	 * Update mmu_cr4_features (and, indirectly, trampoline_cr4_features)
	 * with the current CR4 value.  This may not be necessary, but
	 * auditing all the early-boot CR4 manipulation would be needed to
	 * rule it out.
	 *
	 * Mask off features that don't work outside long mode (just
	 * PCIDE for now).
	 */
	mmu_cr4_features = __read_cr4() & ~X86_CR4_PCIDE;

	memblock_set_current_limit(get_max_mapped());

	/*
	 * NOTE: On x86-32, only from this point on, fixmaps are ready for use.
	 */

#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
	if (init_ohci1394_dma_early)
		init_ohci1394_dma_on_all_controllers();
#endif
	/* Allocate bigger log buffer */
	setup_log_buf(1);

	if (efi_enabled(EFI_BOOT)) {
		switch (boot_params.secure_boot) {
		case efi_secureboot_mode_disabled:
			pr_info("Secure boot disabled\n");
			break;
		case efi_secureboot_mode_enabled:
			pr_info("Secure boot enabled\n");
			break;
		default:
			pr_info("Secure boot could not be determined\n");
			break;
		}
	}

	reserve_initrd();

	acpi_table_upgrade();
	/* Look for ACPI tables and reserve memory occupied by them. */
	acpi_boot_table_init();

	vsmp_init();

	io_delay_init();

	early_platform_quirks();

	/* Some platforms need the APIC registered for NUMA configuration */
	early_acpi_boot_init();
	x86_init.mpparse.early_parse_smp_cfg();

	x86_flattree_get_config();

	initmem_init();
	dma_contiguous_reserve(max_pfn_mapped << PAGE_SHIFT);

	if (boot_cpu_has(X86_FEATURE_GBPAGES))
		hugetlb_cma_reserve(PUD_SHIFT - PAGE_SHIFT);

	/*
	 * Reserve memory for crash kernel after SRAT is parsed so that it
	 * won't consume hotpluggable memory.
	 */
	arch_reserve_crashkernel();

	if (!early_xdbc_setup_hardware())
		early_xdbc_register_console();

	x86_init.paging.pagetable_init();

	kasan_init();

	/*
	 * Sync back kernel address range.
	 *
	 * FIXME: Can the later sync in setup_cpu_entry_areas() replace
	 * this call?
	 */
	sync_initial_page_table();

	tboot_probe();

	map_vsyscall();

	x86_32_probe_apic();

	early_quirks();

	topology_apply_cmdline_limits_early();

	/*
	 * Parse SMP configuration. Try ACPI first and then the platform
	 * specific parser.
	 */
	acpi_boot_init();
	x86_init.mpparse.parse_smp_cfg();

	/* Last opportunity to detect and map the local APIC */
	init_apic_mappings();

	topology_init_possible_cpus();

	init_cpu_to_node();
	init_gi_nodes();

	io_apic_init_mappings();

	x86_init.hyper.guest_late_init();

	e820__reserve_resources();
	e820__register_nosave_regions(max_pfn);

	x86_init.resources.reserve_resources();

	e820__setup_pci_gap();

#ifdef CONFIG_VT
#if defined(CONFIG_VGA_CONSOLE)
	if (!efi_enabled(EFI_BOOT) || (efi_mem_type(0xa0000) != EFI_CONVENTIONAL_MEMORY))
		vgacon_register_screen(&screen_info);
#endif
#endif
	x86_init.oem.banner();

	x86_init.timers.wallclock_init();

	/*
	 * This needs to run before setup_local_APIC() which soft-disables the
	 * local APIC temporarily and that masks the thermal LVT interrupt,
	 * leading to softlockups on machines which have configured SMI
	 * interrupt delivery.
	 */
	therm_lvt_init();

	mcheck_init();

	register_refined_jiffies(CLOCK_TICK_RATE);

#ifdef CONFIG_EFI
	if (efi_enabled(EFI_BOOT))
		efi_apply_memmap_quirks();
#endif

	unwind_init();
}

#ifdef CONFIG_X86_32

static struct resource video_ram_resource = {
	.name	= "Video RAM area",
	.start	= 0xa0000,
	.end	= 0xbffff,
	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
};

void __init i386_reserve_resources(void)
{
	request_resource(&iomem_resource, &video_ram_resource);
	reserve_standard_io_resources();
}

#endif /* CONFIG_X86_32 */

static struct notifier_block kernel_offset_notifier = {
	.notifier_call = dump_kernel_offset
};

static int __init register_kernel_offset_dumper(void)
{
	atomic_notifier_chain_register(&panic_notifier_list,
					&kernel_offset_notifier);
	return 0;
}
__initcall(register_kernel_offset_dumper);

#ifdef CONFIG_HOTPLUG_CPU
bool arch_cpu_is_hotpluggable(int cpu)
{
	return cpu > 0;
}
#endif /* CONFIG_HOTPLUG_CPU */