6873aaa5f9
Add PLDA XpressRICH PCIe host common properties dt-binding doc.
The PolarFire PCIe host uses PLDA IP. Move common properties from Microchip
PolarFire PCIe host to PLDA files.
Link: https://lore.kernel.org/linux-pci/20240328091835.14797-2-minda.chen@starfivetech.com
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: adapt for 5db62b7d3c ("dt-bindings: PCI: host-bridges: Switch
from deprecated pci-bus.yaml")]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: John Clark <inindev@gmail.com>
89 lines
2.9 KiB
YAML
89 lines
2.9 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/pci/microchip,pcie-host.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Microchip PCIe Root Port Bridge Controller
|
|
|
|
maintainers:
|
|
- Daire McNamara <daire.mcnamara@microchip.com>
|
|
|
|
allOf:
|
|
- $ref: plda,xpressrich3-axi-common.yaml#
|
|
- $ref: /schemas/interrupt-controller/msi-controller.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
const: microchip,pcie-host-1.0 # PolarFire
|
|
|
|
clocks:
|
|
description:
|
|
Fabric Interface Controllers, FICs, are the interface between the FPGA
|
|
fabric and the core complex on PolarFire SoC. The FICs require two clocks,
|
|
one from each side of the interface. The "FIC clocks" described by this
|
|
property are on the core complex side & communication through a FIC is not
|
|
possible unless it's corresponding clock is enabled. A clock must be
|
|
enabled for each of the interfaces the root port is connected through.
|
|
This could in theory be all 4 interfaces, one interface or any combination
|
|
in between.
|
|
minItems: 1
|
|
items:
|
|
- description: FIC0's clock
|
|
- description: FIC1's clock
|
|
- description: FIC2's clock
|
|
- description: FIC3's clock
|
|
|
|
clock-names:
|
|
description:
|
|
As any FIC connection combination is possible, the names should match the
|
|
order in the clocks property and take the form "ficN" where N is a number
|
|
0-3
|
|
minItems: 1
|
|
maxItems: 4
|
|
items:
|
|
pattern: '^fic[0-3]$'
|
|
|
|
ranges:
|
|
minItems: 1
|
|
maxItems: 3
|
|
|
|
dma-ranges:
|
|
minItems: 1
|
|
maxItems: 6
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
soc {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
pcie0: pcie@2030000000 {
|
|
compatible = "microchip,pcie-host-1.0";
|
|
reg = <0x0 0x70000000 0x0 0x08000000>,
|
|
<0x0 0x43000000 0x0 0x00010000>;
|
|
reg-names = "cfg", "apb";
|
|
device_type = "pci";
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
#interrupt-cells = <1>;
|
|
interrupts = <119>;
|
|
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
|
|
interrupt-map = <0 0 0 1 &pcie_intc0 0>,
|
|
<0 0 0 2 &pcie_intc0 1>,
|
|
<0 0 0 3 &pcie_intc0 2>,
|
|
<0 0 0 4 &pcie_intc0 3>;
|
|
interrupt-parent = <&plic0>;
|
|
msi-parent = <&pcie0>;
|
|
msi-controller;
|
|
bus-range = <0x00 0x7f>;
|
|
ranges = <0x03000000 0x0 0x78000000 0x0 0x78000000 0x0 0x04000000>;
|
|
pcie_intc0: interrupt-controller {
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <1>;
|
|
interrupt-controller;
|
|
};
|
|
};
|
|
};
|