1
linux/include/scsi/libfcoe.h
john fastabend 6f6c2aa33b [SCSI] fcoe: fix fcoe in a DCB environment by adding DCB notifiers to set skb priority
Use DCB notifiers to set the skb priority to allow packets
to be steered and tagged correctly over DCB enabled drivers
that setup traffic classes.

This allows queue_mapping() routines to be removed in these
drivers that were previously inspecting the ethertype of
every skb to mark FCoE/FIP frames.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-15 11:02:07 +04:00

349 lines
12 KiB
C

/*
* Copyright (c) 2008-2009 Cisco Systems, Inc. All rights reserved.
* Copyright (c) 2007-2008 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*
* Maintained at www.Open-FCoE.org
*/
#ifndef _LIBFCOE_H
#define _LIBFCOE_H
#include <linux/etherdevice.h>
#include <linux/if_ether.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h>
#include <linux/workqueue.h>
#include <linux/random.h>
#include <scsi/fc/fc_fcoe.h>
#include <scsi/libfc.h>
#define FCOE_MAX_CMD_LEN 16 /* Supported CDB length */
/*
* Max MTU for FCoE: 14 (FCoE header) + 24 (FC header) + 2112 (max FC payload)
* + 4 (FC CRC) + 4 (FCoE trailer) = 2158 bytes
*/
#define FCOE_MTU 2158
/*
* FIP tunable parameters.
*/
#define FCOE_CTLR_START_DELAY 2000 /* mS after first adv. to choose FCF */
#define FCOE_CTRL_SOL_TOV 2000 /* min. solicitation interval (mS) */
#define FCOE_CTLR_FCF_LIMIT 20 /* max. number of FCF entries */
#define FCOE_CTLR_VN2VN_LOGIN_LIMIT 3 /* max. VN2VN rport login retries */
/**
* enum fip_state - internal state of FCoE controller.
* @FIP_ST_DISABLED: controller has been disabled or not yet enabled.
* @FIP_ST_LINK_WAIT: the physical link is down or unusable.
* @FIP_ST_AUTO: determining whether to use FIP or non-FIP mode.
* @FIP_ST_NON_FIP: non-FIP mode selected.
* @FIP_ST_ENABLED: FIP mode selected.
* @FIP_ST_VNMP_START: VN2VN multipath mode start, wait
* @FIP_ST_VNMP_PROBE1: VN2VN sent first probe, listening
* @FIP_ST_VNMP_PROBE2: VN2VN sent second probe, listening
* @FIP_ST_VNMP_CLAIM: VN2VN sent claim, waiting for responses
* @FIP_ST_VNMP_UP: VN2VN multipath mode operation
*/
enum fip_state {
FIP_ST_DISABLED,
FIP_ST_LINK_WAIT,
FIP_ST_AUTO,
FIP_ST_NON_FIP,
FIP_ST_ENABLED,
FIP_ST_VNMP_START,
FIP_ST_VNMP_PROBE1,
FIP_ST_VNMP_PROBE2,
FIP_ST_VNMP_CLAIM,
FIP_ST_VNMP_UP,
};
/*
* Modes:
* The mode is the state that is to be entered after link up.
* It must not change after fcoe_ctlr_init() sets it.
*/
#define FIP_MODE_AUTO FIP_ST_AUTO
#define FIP_MODE_NON_FIP FIP_ST_NON_FIP
#define FIP_MODE_FABRIC FIP_ST_ENABLED
#define FIP_MODE_VN2VN FIP_ST_VNMP_START
/**
* struct fcoe_ctlr - FCoE Controller and FIP state
* @state: internal FIP state for network link and FIP or non-FIP mode.
* @mode: LLD-selected mode.
* @lp: &fc_lport: libfc local port.
* @sel_fcf: currently selected FCF, or NULL.
* @fcfs: list of discovered FCFs.
* @fcf_count: number of discovered FCF entries.
* @sol_time: time when a multicast solicitation was last sent.
* @sel_time: time after which to select an FCF.
* @port_ka_time: time of next port keep-alive.
* @ctlr_ka_time: time of next controller keep-alive.
* @timer: timer struct used for all delayed events.
* @timer_work: &work_struct for doing keep-alives and resets.
* @recv_work: &work_struct for receiving FIP frames.
* @fip_recv_list: list of received FIP frames.
* @flogi_req: clone of FLOGI request sent
* @rnd_state: state for pseudo-random number generator.
* @port_id: proposed or selected local-port ID.
* @user_mfs: configured maximum FC frame size, including FC header.
* @flogi_oxid: exchange ID of most recent fabric login.
* @flogi_req_send: send of FLOGI requested
* @flogi_count: number of FLOGI attempts in AUTO mode.
* @map_dest: use the FC_MAP mode for destination MAC addresses.
* @spma: supports SPMA server-provided MACs mode
* @probe_tries: number of FC_IDs probed
* @dest_addr: MAC address of the selected FC forwarder.
* @ctl_src_addr: the native MAC address of our local port.
* @send: LLD-supplied function to handle sending FIP Ethernet frames
* @update_mac: LLD-supplied function to handle changes to MAC addresses.
* @get_src_addr: LLD-supplied function to supply a source MAC address.
* @ctlr_mutex: lock protecting this structure.
* @ctlr_lock: spinlock covering flogi_req
*
* This structure is used by all FCoE drivers. It contains information
* needed by all FCoE low-level drivers (LLDs) as well as internal state
* for FIP, and fields shared with the LLDS.
*/
struct fcoe_ctlr {
enum fip_state state;
enum fip_state mode;
struct fc_lport *lp;
struct fcoe_fcf *sel_fcf;
struct list_head fcfs;
u16 fcf_count;
unsigned long sol_time;
unsigned long sel_time;
unsigned long port_ka_time;
unsigned long ctlr_ka_time;
struct timer_list timer;
struct work_struct timer_work;
struct work_struct recv_work;
struct sk_buff_head fip_recv_list;
struct sk_buff *flogi_req;
struct rnd_state rnd_state;
u32 port_id;
u16 user_mfs;
u16 flogi_oxid;
u8 flogi_req_send;
u8 flogi_count;
u8 map_dest;
u8 spma;
u8 probe_tries;
u8 priority;
u8 dest_addr[ETH_ALEN];
u8 ctl_src_addr[ETH_ALEN];
void (*send)(struct fcoe_ctlr *, struct sk_buff *);
void (*update_mac)(struct fc_lport *, u8 *addr);
u8 * (*get_src_addr)(struct fc_lport *);
struct mutex ctlr_mutex;
spinlock_t ctlr_lock;
};
/**
* struct fcoe_fcf - Fibre-Channel Forwarder
* @list: list linkage
* @time: system time (jiffies) when an advertisement was last received
* @switch_name: WWN of switch from advertisement
* @fabric_name: WWN of fabric from advertisement
* @fc_map: FC_MAP value from advertisement
* @fcf_mac: Ethernet address of the FCF
* @vfid: virtual fabric ID
* @pri: selection priority, smaller values are better
* @flogi_sent: current FLOGI sent to this FCF
* @flags: flags received from advertisement
* @fka_period: keep-alive period, in jiffies
*
* A Fibre-Channel Forwarder (FCF) is the entity on the Ethernet that
* passes FCoE frames on to an FC fabric. This structure represents
* one FCF from which advertisements have been received.
*
* When looking up an FCF, @switch_name, @fabric_name, @fc_map, @vfid, and
* @fcf_mac together form the lookup key.
*/
struct fcoe_fcf {
struct list_head list;
unsigned long time;
u64 switch_name;
u64 fabric_name;
u32 fc_map;
u16 vfid;
u8 fcf_mac[ETH_ALEN];
u8 pri;
u8 flogi_sent;
u16 flags;
u32 fka_period;
u8 fd_flags:1;
};
/**
* struct fcoe_rport - VN2VN remote port
* @time: time of create or last beacon packet received from node
* @fcoe_len: max FCoE frame size, not including VLAN or Ethernet headers
* @flags: flags from probe or claim
* @login_count: number of unsuccessful rport logins to this port
* @enode_mac: E_Node control MAC address
* @vn_mac: VN_Node assigned MAC address for data
*/
struct fcoe_rport {
unsigned long time;
u16 fcoe_len;
u16 flags;
u8 login_count;
u8 enode_mac[ETH_ALEN];
u8 vn_mac[ETH_ALEN];
};
/* FIP API functions */
void fcoe_ctlr_init(struct fcoe_ctlr *, enum fip_state);
void fcoe_ctlr_destroy(struct fcoe_ctlr *);
void fcoe_ctlr_link_up(struct fcoe_ctlr *);
int fcoe_ctlr_link_down(struct fcoe_ctlr *);
int fcoe_ctlr_els_send(struct fcoe_ctlr *, struct fc_lport *, struct sk_buff *);
void fcoe_ctlr_recv(struct fcoe_ctlr *, struct sk_buff *);
int fcoe_ctlr_recv_flogi(struct fcoe_ctlr *, struct fc_lport *,
struct fc_frame *);
/* libfcoe funcs */
u64 fcoe_wwn_from_mac(unsigned char mac[], unsigned int, unsigned int);
int fcoe_libfc_config(struct fc_lport *, struct fcoe_ctlr *,
const struct libfc_function_template *, int init_fcp);
u32 fcoe_fc_crc(struct fc_frame *fp);
int fcoe_start_io(struct sk_buff *skb);
int fcoe_get_wwn(struct net_device *netdev, u64 *wwn, int type);
void __fcoe_get_lesb(struct fc_lport *lport, struct fc_els_lesb *fc_lesb,
struct net_device *netdev);
void fcoe_wwn_to_str(u64 wwn, char *buf, int len);
int fcoe_validate_vport_create(struct fc_vport *vport);
/**
* is_fip_mode() - returns true if FIP mode selected.
* @fip: FCoE controller.
*/
static inline bool is_fip_mode(struct fcoe_ctlr *fip)
{
return fip->state == FIP_ST_ENABLED;
}
/* helper for FCoE SW HBA drivers, can include subven and subdev if needed. The
* modpost would use pci_device_id table to auto-generate formatted module alias
* into the corresponding .mod.c file, but there may or may not be a pci device
* id table for FCoE drivers so we use the following helper for build the fcoe
* driver module alias.
*/
#define MODULE_ALIAS_FCOE_PCI(ven, dev) \
MODULE_ALIAS("fcoe-pci:" \
"v" __stringify(ven) \
"d" __stringify(dev) "sv*sd*bc*sc*i*")
/* the name of the default FCoE transport driver fcoe.ko */
#define FCOE_TRANSPORT_DEFAULT "fcoe"
/* struct fcoe_transport - The FCoE transport interface
* @name: a vendor specific name for their FCoE transport driver
* @attached: whether this transport is already attached
* @list: list linkage to all attached transports
* @match: handler to allow the transport driver to match up a given netdev
* @create: handler to sysfs entry of create for FCoE instances
* @destroy: handler to sysfs entry of destroy for FCoE instances
* @enable: handler to sysfs entry of enable for FCoE instances
* @disable: handler to sysfs entry of disable for FCoE instances
*/
struct fcoe_transport {
char name[IFNAMSIZ];
bool attached;
struct list_head list;
bool (*match) (struct net_device *device);
int (*create) (struct net_device *device, enum fip_state fip_mode);
int (*destroy) (struct net_device *device);
int (*enable) (struct net_device *device);
int (*disable) (struct net_device *device);
};
/**
* struct fcoe_percpu_s - The context for FCoE receive thread(s)
* @thread: The thread context
* @fcoe_rx_list: The queue of pending packets to process
* @page: The memory page for calculating frame trailer CRCs
* @crc_eof_offset: The offset into the CRC page pointing to available
* memory for a new trailer
*/
struct fcoe_percpu_s {
struct task_struct *thread;
struct sk_buff_head fcoe_rx_list;
struct page *crc_eof_page;
int crc_eof_offset;
};
/**
* struct fcoe_port - The FCoE private structure
* @priv: The associated fcoe interface. The structure is
* defined by the low level driver
* @lport: The associated local port
* @fcoe_pending_queue: The pending Rx queue of skbs
* @fcoe_pending_queue_active: Indicates if the pending queue is active
* @priority: Packet priority (DCB)
* @max_queue_depth: Max queue depth of pending queue
* @min_queue_depth: Min queue depth of pending queue
* @timer: The queue timer
* @destroy_work: Handle for work context
* (to prevent RTNL deadlocks)
* @data_srt_addr: Source address for data
*
* An instance of this structure is to be allocated along with the
* Scsi_Host and libfc fc_lport structures.
*/
struct fcoe_port {
void *priv;
struct fc_lport *lport;
struct sk_buff_head fcoe_pending_queue;
u8 fcoe_pending_queue_active;
u8 priority;
u32 max_queue_depth;
u32 min_queue_depth;
struct timer_list timer;
struct work_struct destroy_work;
u8 data_src_addr[ETH_ALEN];
};
void fcoe_clean_pending_queue(struct fc_lport *);
void fcoe_check_wait_queue(struct fc_lport *lport, struct sk_buff *skb);
void fcoe_queue_timer(ulong lport);
int fcoe_get_paged_crc_eof(struct sk_buff *skb, int tlen,
struct fcoe_percpu_s *fps);
/**
* struct netdev_list
* A mapping from netdevice to fcoe_transport
*/
struct fcoe_netdev_mapping {
struct list_head list;
struct net_device *netdev;
struct fcoe_transport *ft;
};
/* fcoe transports registration and deregistration */
int fcoe_transport_attach(struct fcoe_transport *ft);
int fcoe_transport_detach(struct fcoe_transport *ft);
#endif /* _LIBFCOE_H */